Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Suggested
Results for it technician technician it support technician in Jobs in South Africa
1
SavedSave
Our client in the agricultural sector is seeking an Automation Technician to join their team in Nelspruit.
Responsibilities:
Development of Auto Cad drawings and design.
Complete reports.
Assist with technical projects and Beta Sites as and when needed.
Assist with assembly.
Automation of irrigation dosing units.
Assist with controllers in cabinets with protection devices.
Assist with assembly of radio units.
Testing software and hardware.
Wiring of cabinets and panels
Troubleshooting of controller hardware and software.
Assist with telephonic support to dealers and end users.
On-site support to dealers and end users â?? South Africa and SADC Countries.
Training on DF products, training dealers and end users on the correct usage of the automation equipment.
Assist with the servicing of filter banks and back flush controllers.
Assist with onsite drip installation in South Africa or SADC countries.
Providing training on the products relating to the filters, drip, valves, specific to the installation type and environment of the equipment used.
Requirements:
Matric certificate.
3+ years in a similar role.
Must have good communication skills in English and Afrikaans.
National diploma or degree in electronics/mechatronics.
Drivers license.
ELV electrical systems and VSD/PLC.
An understanding of hydraulics
AutoCAD knowledge.
Problem solving and organizational skills.
To apply, please send your CV with your salary expectations to hannah@personastaff.co.zaPlease note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. By applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request our POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004772/H&source=gumtree
15h
SavedSave
Junior IT Technician between the age of 20 to 30 required.
We are looking to fill the position of a JUNIOR IT TECHNICIAN
Salary: R 8 000.00 + Fuel Allowance
Full Time Position
Responsibilities:
· Service Desk and Onsite Support
· Software and Hardware Support
· Setup Printers, Network devices etc..
· Network Cabling and Installations
Requirements and Qualifications:
· A+
· N+ ( Will be an advantage)
· Knowledge of Microsoft Applications
· Valid Drivers Licence (Must have own Vehicle)
· Good Communication Skills
Email CV to: jobs@plexus-is.co.za
or
Call: Rajesh 083 792 5450 / Dillon 082 787 5854
1d
1
SavedSave
Technical Support Manager (POS24084)RandburgR 15 000 to R 18 000 per monthRequirementsQualification: Minimum GR12 but Electronics/iT Technical Diploma or BTech degree recommended.Good knowledge of CCTV, Access Control, Alarms, Gate motors and Electric Fence and able to technically support the productsPC HW & SW, Networks and Basic Electronics knowledge/qualifications & experienceExperience as Support Technician/Help Desk operator and working with clientsOwn vehicle and drivers license to get to workClosing Date: 15March 2024
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzE4NjQ3M19fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1789386&xid=1109_186473
2d
1
SavedSave
Job Description/Duties:Provide clients with support on operating systems (Windows, Linux, Mac), business related software & peripherals.Provide clients with support on server related operating systems (Windows, Linux) and software.Manage clients’ network infrastructure. Minimum Requirements: Valid drivers license and reliable vehicle.3 – 5 years of valid work experience.Must be able to work in a team and on their own. Please mail your CV to hr3 (at) peopledimension (dot) co (dot) za Shortlisted applicants will be contacted within 2 weeks, if you do not hear from us by then your application for this position was unsuccessful, but you have been added to our database for future vacancies.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzE4NTYwOF9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1786770&xid=1109_185608
2d
1
SavedSave
Surgo (PTY) Ltd. has partnered with a global analytics and digital solutions company serving industries including insurance, healthcare, banking and financial services, media, retail, and others. They aim to bridge the gap between digital expectations and real outcomes for international companies with Digital Intelligence.
Our client is recruiting for an IT Manufacturing Solutions Analyst to join their team based in Cape Town.
Job purpose:
The IT Manufacturing Solutions Analyst is responsible for the maintenance, debugging, testing, end user support and documenting of manufacturing application software solutions (APS/APL/cullet, ptracker) within the Companys Packaging.
You will work closely with the business, business analysts and other IT team members to understand and capture business requirements then drive the design and development of technical solutions that follow business requirements and strategies
Responsibilities but limited to:
• APSIO Support: Support plants to maintain and upgrade equipment connected to APS
• APL/APS /cullet/pTracker: Support plants to maintain and upgrade software for manufacturing applications
• APSIO Rollout: Support plants to connect new equipment to APS
• APS/APL/APSIO /cullet/pTracker Documentation in Wiki: Keep the APS Wiki up to date and provide required information like setting, IPs, Ports for any kind of equipment.
• Develop test scripts and integration testing and create documentation surrounding solutions: Prepare the testing documents
• Liaise with the business and business analysts on user acceptance testing: Prepare the testing documents
• Create Documentation for APL/APL/APSIO/ptracker/cullet Documentation in SharePoint: Collect and store available documentation from suppliers
• Add new users/printers/ Labels for APL: Create new users/ printers/ labels in the APL system
• Provide required support for the application functionality, integration and infrastructure related to the MES applications: Resolve the created Incidents and requests Qualification Experience:
• 4 years experience
• MS SQL
• Server Operating system
• Work in Industrial Environment especially Glass and Metal Production
• Serial, TCP and other protocols
• Application support experience with Manufacturing applications
• Troubleshoot issues in glass production environment
• Research new developments and options to connect equipment
• Support plants in day-to-day business
Salary: Market Related
Working Hours: Monday to Friday - 08:00am to 17:00pm
Should you wish to apply for the position, please apply directly via this job board, please ensure that you quote reference number 202632 subject heading or email body.
Surgo (Pty) Ltd will consider all applications in terms of its Employment Equity (EE) and is committed in maintaining diversity in its appointments. Surgo (Pty) Ltd, therefore also encourages people with disabilities and from other diverse backgrounds to apply. Due to the high volume of applicat...Job Reference #: 202632
2d
1
SavedSave
Job Title : Senior IT Technician
Department : Information Technology
Reports To : Team Lead: Service Delivery
Paterson Grade : C1
PURPOSE OF JOB
The Senior Desktop Support provides proven senior technical experience and strategic insights to meet the IT needs of staff members of all Metrofile Group companies. The position works in close coordination with both the Service Desk Manager and System Administrators to devise, plan, implement and manage a comprehensive integrated solution.
KEY RESPONSIBILITIES include the following. Other duties may be assigned.
Leadership Capabilities
Living their Purpose – Identifies and embraces the purpose and values and puts these into practice in their professional lifeInfluence – Builds relationships and communicates effectively in order to positively influence peers and other stakeholdersPerformance drive – Seeks opportunities to challenge self; teams with others across businesses and borders to deliver and takes accountability for own and team resultsStrategic direction – Understands objectives for clients, aligns own work to objectives and sets personal prioritiesTalent development – Develops self by actively seeking opportunities for growth, shares knowledge and experiences with others, and acts as a strong brand ambassador
Professional Capabilities
Knows the business and industry – Knows how member firm business works and keeps up-to-date on industry activities, marketplace trends and leading practices.Manages to result – Takes responsibility for assigned areas and contributes to the successful realization of common goals.Manages and executes projects – Prepares and manages work plans to ensure efficient and timely completion of work.Solves problems – Identifies and solves problems objectively using analysis, experience and judgment.Manages quality and risk – Understands and applies quality assurance and risk management procedures in all areas of work performed.Manages change and ambiguity – Is adaptive and flexible in the face of change and ambiguity.
Technical Competencies
Solid technical knowledge in specific functional area.Good skills in analysis and report writing.Fully competent in Microsoft suite, and programs relevant to role.Competent in Windows and Mac Support relevant to role.Good understanding of business principles.
Behavioural Competencies
Communicates very effectively both in writing and verbally.Displays good interpersonal and relationship building skills....
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMDIzMjQyMzA2P3NvdXJjZT1ndW10cmVl&jid=1482404&xid=3023242306
2d
1
Overview:
A Service Technician (Printers and Copiers) is responsible for installing, maintaining, troubleshooting, and repairing printers, copiers, and related office equipment. They ensure that these devices are functioning properly, provide technical support to end-users, and ensure optimal performance and customer satisfaction.
Minimum Requirements:
Grade 12 / MatricRelated technical certifications or qualification (advantageous)3+ years’ experience in a similar roleStrong knowledge of printer and copier hardware, software, and networking concepts.Proficiency in diagnosing and resolving technical issues related to printers and copiers.Familiarity with different printer technologies and manufacturersExperience in using diagnostic tools, software utilities, and troubleshooting methods.Must have a Valid driver’s license
Responsibilities:
Installation and Setup:
Install and configure printers, copiers, and other office equipment at customer sites.Set up network connectivity, drivers, and software to enable proper functionality.Conduct tests and ensure devices are functioning correctly.
Maintenance and Repair:
Perform routine maintenance tasks on printers and copiers, such as cleaning, lubrication, and component replacements.Diagnose and troubleshoot hardware and software issues to identify the root cause of problems.Repair/replace faulty components, such as print heads, rollers, circuit boards, or sensors.Upgrade firmware and software to enhance device performance and security.Maintain accurate records of maintenance activities, repairs, and parts inventory.
Customer Support:
Respond to service calls and provide technical support to customers in person or via phone, email, or remote assistance tools.Analyze and resolve customer-reported issues, ensuring minimal downtime and disruption to their operations.Educate customers on device operation, maintenance best practices, and troubleshooting techniques.
Quality Assurance:
Test repaired/serviced devices to verify functionality before returning to customers.Perform quality checks to ensure print and copy output meets established standards.Stay updated on industry trends, new technologies, and advancements
Inventory and Documentation:
Maintain an inventory of spare parts, tools, and supplies needed for repai...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zNTQ1MjE0NTA0P3NvdXJjZT1ndW10cmVl&jid=1610925&xid=3545214504
2d
1
SavedSave
Overview:
The duties of this role include ensuring ongoing maintenance and support of effective IT infrastructure, Network, Website, RIS, and PACS systems to meet business requirements in line with the IT Strategy and Company strategic objectives. This position reports to the IT Manager
Minimum Requirements:
Grade 12 / MatricCompleted Degree / Diploma in Information Technology (NQF 6 or higher) ORA+, N+, MCSE 2016 or MCITP2+ years’ experience in:
Networking, VOIP, FortiGate Firewalls, WS 2012/2016/2019 R2, DNS, AD, DHCP, DC, WSUS, Roaming Profiles, Group Policy,
Print Server, Win 10 & Win 11Exposure to Office 365 and MS Office 2016 – 2021, Enterprise Anti-Virus softwareBasic understanding of:
PRTG Network monitor, VEEAM Backup Server, ESXi 5.0/5.5. Freshdesk Ticketing System, TeamViewer and Anydesk VMWare and HyperV Configuration, Installation and Administration
Virtualization and/or FortiGate Certification (advantageous)Literacy in MS Outlook and ExcelOwn reliable and insured transport, with a valid Driver’s license; able and willing to travel
Responsibilities:
Responsible for ensuring effective quality management of the IT infrastructure, Network, Website, RIS, and PACS systemsResponsible for ensuring effective relationship building with internal and external stakeholders by participating in communication sessions and regularly follow-ups on relative IT issues and prioritiesResponsible for ensuring effective systems maintenance of IT infrastructure, Network, Website, RIS and PACS systemsReviewing data integrity, audits of data and testing systems on a continuous basisResponsible for ensuring system changes or enhancements are implemented to optimize system capabilityAbility to meet deadlinesEnsuring user efficiency by educating and training users on all IT systemsGeneral PACS Administration tasks on a day-to-day basisAny ad-hoc duties
Position Specific Requirements:
Able to work overtime, afterhours, weekends, public holidays and be on a weekly call (due to the industry / sector)Able and willing to travel
(Knowledge, skills and attributes) Competencies:
Problem-solving, analysis and judgementFocused, Confident and energeticVerbal and written communicationWork under immense pressurePunctual and Ethical behaviourSelf-motivated and Time ManagementSolid and Logical troubleshooting skillsQuick Customer responsivenessOrganizational awarenessAbility to multitask an...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zOTc1MTUzNDY/c291cmNlPWd1bXRyZWU=&jid=1751291&xid=397515346
2d
1
SavedSave
Overview:
An automotive company based in East London IDZ is looking for an Electrical Technician with PLC experience, within the Manufacturing environment, to join their team.
Minimum requirements:
Trade Test Qualification (Electrician/ Millwright) or Electrical Engineering Diploma3-5 years in an automotive, manufacturing environmentPLC experience essentialServo Drives and MotorsSwitchgear and logic knowledge
Responsibilities:
Attending to all breakdowns in the plant with the replacement of worn and damaged components and support production with reinstating equipment, jig fixtures and testing equipment to the intended operational state.Attending to and supporting preventative maintenance tasks which includes the definition and work required to ensure uptime of equipment, jigs fixtures and testing equipment and support the administrative documentation and follow-up work required thereof.Participate and Support CI ProjectsAttend to any building maintenance as is needed from time to time which includes housekeeping in the workshop and respective production/ plant areasAdministration of critical spares and the electronic maintenance system which includes ordering and stock levels of the prescribed componentSupport the installation and commissioning of equipment jigs fixtures and control systems related to new program launches and participates in the team in all related activities which includes quality, OHS and productivity activities and verifications thereofParticipation in system audits of the areas of responsibility related to ISO 14000 and IATF and support corrective actions from agreed improvementsAny reasonable tasks as given by direct report and management
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMTg0ODYyNjg4P3NvdXJjZT1ndW10cmVl&jid=1584175&xid=3184862688
2d
1
SavedSave
The role of a Hydraulic Technician (Offshore) involves crucial responsibilities related to the maintenance and repair of hydraulic machinery and equipment in offshore mining and plant operations.
Duties and Responsibilities:
Safety Compliance: Ensure strict adherence to Group Safety and Security policies to maintain a safe working environment.
Risk Assessment: Conduct comprehensive Risk Assessments for all activities to identify potential hazards and implement necessary safety measures.
Permits: Ensure compliance with necessary permits, including Permits to Work, especially for activities such as Hot Work.
Maintenance and Repairs: Perform safe inspections, maintenance, and repairs on all mining and plant equipment and machinery. Follow instructions provided by the Mechanical Supervisor (MECH SUPV) and Technical Supervisor (TECH SUPT).
Tool Maintenance: Maintain work tools in a safe and properly maintained condition, and ensure they are stored securely.
ROV Support: Assist in the launch and recovery of ROV seabed tools when required.
Housekeeping: Maintain proper housekeeping standards at all work sites to ensure a clean and organized workspace.
Qualifications:
Hydraulics Certificate: Possess a certificate or qualification related to hydraulics to demonstrate expertise in hydraulic systems.
Trade Theory: Strong understanding of trade theory relevant to hydraulic equipment and machinery.
Offshore Experience: Have experience working in offshore installations and performing hydraulic maintenance and repair tasks.
Valid Passport: Maintain a current and valid passport for travel and offshore assignments.
Seafarers Medical Certificate: Hold a valid Seafarers Medical certificate issued in RSA (Republic of South Africa) or Namibia.
Police Clearance Certificate (PCC): Possess a valid Police Clearance Certificate issued in RSA or Namibia.
Seamans Record Book: Maintain a Seamans Record Book issued in RSA or Namibia, as it may be required for offshore work.
STCW Courses: Have completed relevant STCW (Standards of Training, Certification & Watchkeeping for Seafarers) courses to meet industry standards and safety requirements.
The Hydraulic Technician plays a critical role in maintaining the hydraulic systems that are essential for offshore mining and plant operations. Ensuring safety, compliance, and the proper functioning of equipment are paramo...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMzE0MTk3OTEzP3NvdXJjZT1ndW10cmVl&jid=1705648&xid=2314197913
2d
1
SavedSave
Our client, a medium-sized Engineering company based in, Stellenbosch.is specialising in the design, development, integration, implementation and support of complex hardware and software systems across the globe 24x7.Primarily based in Stellenbosch, South Africa, we seek to employ an ICT Support Technician at our main office to join the IT Department. The incumbent will primarily provide support for personnel and their related work equipment and services and other ICT infrastructure services of the company during office and standby hours.RESPONSIBILITIES: Provide technical support to in person, telephone and email requests from users for all ICT servers, hardware, software and associated peripherals.Technical support includes software troubleshooting, hardware troubleshooting, WIFI/VPN connectivity troubleshooting and peripherals such as printers troubleshooting.Generation and update of tickets within the IT Support Ticket system utility for the purpose of tracking open support issues. This includes documenting the progress and outcome of high-impact support calls and contributing to the root cause analysis process.Pro-actively providing information to users on the progress of outstanding support calls, including procurement requests.Monitoring Systems Health and continuity locally and remotely, in and after hours, for the purposes of continuity.ICT user hardware and software asset tracking.General IT Infrastructure support.Maintenance of the Network Infrastructure, includingHardware troubleshooting,LAN/WAN troubleshooting, as well as.Network and Internet access.Managing Access Control systems including:Access Control System management/maintenance,Access Control System enrolments,Alarm System Administrator.Coordination with response, callouts to premises on response and lock up when needed.Fire Safety System administration.Providing assistance with the pre-deployment testing of general systems before installation and commissioning.Providing assistance with commissioning, including new hardware.Ordering and Asset Management of ICT Equipment. EDUCATION AND EXPERIENCE (minimum): A 3-year tertiary qualification (CTU, Centurion Academy, a University of Technology e.g., CPUT, etc.)One or more of the following courses: A+, N+, MCSE, Cisco CCNA, RHSE. International certification would be advantageousA minimum of 5 years relevant experienceSKILLS / EXPERIENCE / COMPETENCIES & TECHNOLOGIES: Microsoft Office SuiteMicrosoft Exchange Server, WSUS, ADBackup technologies (Altaro, Arc Server, Tape drives)Infrastructure Monitoring Software (e.g., PRTG, Nagios, SolarWinds, etc.)Experience in the installation and troubleshooting of one or more of the following Operating Systems and Applications: Windows 10, Mac Operating systems, Windows & SQL Server 2008 - 2019, Linux etc.Must have at least midlevel knowledge of routing, switching, IP addressing & FW rules.Network Cabling and Crimping.Proven telephonic and onsite support history.Willingness to travel international
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzE4NjM4OF9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1788379&xid=1109_186388
2d
1
Type of Position:Applications from suitably qualified & experienced persons are invited to fill the above vacancy in the companys Production – Paint Shop Department.
Job Description and Responsibilities
Ensuring that all Paint shop electrical installations and PLC systems are maintained to company standards and requirements in order to ensure safe plant operation by means of structured maintenance systems such as PM’s, check lists, weekend work job cards etc.
Recommending, updating and modifying electrical installations to the latest engineering technology in order to stay in line with the latest technologies available on the market by constantly dealing with external suppliers and similar industrial companies.
Maintaining of electrical equipment to meet the required health & safety standards to ensure a safe work environment for all employees.
Making the necessary adjustments to facilities such as conveyor speeds, fan speeds, system pressures, tank levels etc. by means of PLC settings, controller adjustments and thereafter verify that the adjustments produced the required outcome by measuring the output performance/parameters.
Carrying out planned maintenance activities using the correct tools and testing equipment according to company systems, processes and procedures to ensure that all equipment is serviced at the required intervals as determined from time to time by the maintenance planner / original equipment supplier.
Activating participation on daily basis in the Shop Floor Management structure. This includes sectional meetings and problem resolution activities/implementation as driven by the team.
Education and Experience
NN Diploma/ National Diploma/Degree in Electrical Engineering (light current) / MechatronicsTrade test certificate Electrician /MillwrightMinimum 2-4years’ proven operations and maintenance experience within in the manufacturing environmentGood experience in VSD control system (Danfoss & SEW)Automation experience & Certified training (PLC’s Drives, etc.). Advantageous
Please forward CV and ALL supporting documentation to, Caree-Lee@profilepersonnel.co.za. Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automatically be added to our database for future vacancies.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODkyODc4NjAyP3NvdXJjZT1ndW10cmVl&jid=1752796&xid=3892878602
2d
1
SavedSave
Objective of function
Operation and control of development processes in accordance with BOS / PLUS for automotive trim development from concept to production readiness as project responsible Trim Engineer
Main tasks/important responsibilities
Technical project coordination in close cooperation with program managementPattern development responsibility for prototype and serial production trim covers until serial production release utilizing the CAD System OPTITEX as well as technically leading the supporting team members (Technician / Specialist) and ensuring the fulfilment of the intended project maturity, Bill of Material management in TPDM , TC11, Excel , Word and PPTX knowledgeCreation, Documentation and Maintenance of technical drawings via Canvas Drawing ProgramMaintenance of the project folder (technical part / Masterfile)Competent project contact partner for all internal and external customersTo create and update the DFMEA and application in daily job. responsible of DFMEA introduction to the TeamSupport of the Cut &Sew and JIT plant(s) in the production launch phases. (DV, PV, SOP and PS)Supports the Complete Seat team at all interfaces to the trim cover like A-surface definition of the foam pads, example BBP, SMTE, ENG Responsible to define overbuild of the foam parts, trim attachment to the metal structure, etc.Supporting Complete Seat with Seat development.
Education (technical and/or commercial)
Job related technical degree like dressmaker / upholster / interior decorator
Job experience
Minimum 5 years of job experience in the production orientated Trim Development
Professional knowledge: in detail when specialist function
Well-founded knowledge in all areas of sewing techniques and their application.
Knowledge about the processes in Cut & Sew and JIT Plants.
Experienced in all current construction methods in the areas of Trim Development.
Good Technical abilities.
Experienced in the use of OPTITEX, LECTRA, ASSYST, GERBER.
User knowledge of a 2D-CAD system
Please forward CV and ALL supporting documentation to, careee-lee@profilepersonnel.co.za. Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automatically be added to our database for future vacancies.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNTI4MzgxMTAyP3NvdXJjZT1ndW10cmVl&jid=1328673&xid=1528381102
2d
1
Principal System Design Engineer (Work-From-Home)
Location: Pretoria, Gauteng, South Africa
Company
Our client is a leading scientific and technology research organisation that researches, develops, localises and diffuses technologies to accelerate socio-economic prosperity in South Africa. The organisation’s work contributes to industrial development and supports a capable state. They have a vacancy for a Principal System Design Engineer in the Mining Cluster area within Division 2. The main purpose of this position will be to define and lead the development of complex mining systems, across multidisciplinary engineering discipline. To support the mining industry in accelerating people centred modernisation drive and the adoption of appropriate innovations across the mining value chain. This position is based in Pretoria, but will be a Work-From-Home role.
Key Responsibilities
Translate mining process problem or customer needs into specific, well written requirements to which systems and sub-systems can be architected and designed.Design, building an Engineering system from subsystems and components to integrate the solutions into the Mining system value chain including supporting the fine tuning of a process to stability.Understand the inherent risk associated with introducing of new innovations into a mining system and to conduct a risk-based analysis to ensure that the subsystem and systems designs meet the requirements.Model the process to analyse the risk and to engineer the mitigations to reduce or eliminate the risk, for successful application of the solution.Compile a system or product test procedures to be used during step or validation tests.Conduct validation or verification test e.g. Factory testing of the application of the product solution to ensure it meets the desired specifications prior to installation.Develop the product operating procedure and be able to train the user on the product application through its product life cycle.Understand subsystems interfaces to identify the process value chain dependencies to ensure the coherent application of product /solution.Lead multi-disciplinary project teams to work together in delivering the desired product solution. This includes interface with the customer to detail the user requirements and translate these to the project team and into a workable solution for the client.Facilitate and drive regular client stakeholder engagement including post project evaluation with the impact area managers to understand the use of testing and research results for clients’ decision support and value add.Driv...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS84NDUyMDA0NTg/c291cmNlPWd1bXRyZWU=&jid=908507&xid=845200458
2d
1
This role will see you as an experienced, qualified, innovative, committed and energetic individual who will be required to operate under various disciplines, manufacturing and process environment:
• Knowledge and experience with P.L.C and S.C.A.D.A systems that interface and operate manufacturing machinery, associated process plant that service and supply such machinery are key performance areas for this position.• Services such as steam, water, air and chemical dosing form a key input to the quality, efficiency and operation of the manufacturing machinery as does their measurement and control.• Knowledge and ability to interrogate, fault find and repair the above systems is key to the success of this position.• Knowledge and skills in instrumentation relative to pressure, level, temperature, flow, mass, control valves, their application are also key to this position.• Electrical power supply is a major input to the plant Measurement of consumption and demand systems are in place, support of these systems is required by this position.
Essential requirements for the above position are as follows:• S4/N6 or equivalent. • Plant/equipment maintenance experience as well as a fault finding background.• Relevant experience in a manufacturing environment (Minimum 10 years).• Computer literate in Microsoft Office applications.
Please forward CV and ALL supporting documentation to, caree-lee@profilepersonnel.co.za.
Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automatically be added to our database for future vacancies.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNjk5NjcxMjY1P3NvdXJjZT1ndW10cmVl&jid=1283435&xid=1699671265
2d
1
This role is within the MyMicros Hosted Services department of Micros South Africa, providingmaintenance and support on all Hosted products and infrastructure. Ensuring at all times thatthe company’s process and control measures are adhered to.
Responsibilities:
Ensure technology is accessible and equipped with current hardware and software.Ensure industry best practices is applied with regard to ( Operating Systems, Security,Database recovery,etc).Troubleshoot hardware, software and network operating system problemsReport health status of the systems/servers on a daily basis.Provide orientation to new users of existing technologyTrain staff about potential uses of existing technologyTravel to Data Centre collect and drop off equipment for repairsProvide individual training and support on requestProvide recommendations about accessing information and supportMaintain current and accurate inventory of technology hardware, software and resourcesMonitor and maintain technology to ensure maximum accessTroubleshoot all technology issuesMaintain log and/or list of required repairs and maintenanceMake recommendations about purchase of technology resourcesResearch current and potential resources and servicesAdvise staff of security breach and/or change in password or security statusTo ensure Backup strategy is adhered too.To ensure Security strategy is adhered too.Maintain and configure VMware cluster.Maintain and configure SAN equipment.Maintain LAN support, server support, licensing, WAN connectivity, applications, networksecurity and monitoringTo ensure all clients are updating correctly to the MyMicros environment.Assist and mentor the implementation team regarding the technologies used in the DataCentre.To ensure accurate and timely updates of logged support issues one the in-house calllogging system.To be aware of escalation procedures as communicated from time to time.Be responsible for interaction with customers via email, telephone etc.Research and test problems to confirm, isolate and identify what caused the problem andsolutions. When unable to resolve problems, escalate to the correct channels.Maintain all documentation required by Micros.Assist with the occasional implementing, testing and writing of any documentation that maybe required.To carry out other appropriate scheduled, work, tasks and duties in any of the companypremises as and when required.Test and troubleshoot new versions prior to release.
In accordance with Adapt IT’s Employment Equity plans and goals, preference will be given to suitable applicants from the designated ...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zOTk0ODU3ODE/c291cmNlPWd1bXRyZWU=&jid=1226928&xid=399485781
2d
1
SavedSave
Assist staff with installation, configuration and ongoing usability of desktops, laptops, peripheral equipment and software complying with given standards and guidelines.
Participate in varied computer platforms in multi-layered client server environment. Train and guide staff hardware and software usage. Participate in important technological department projects and perform problem diagnosis of network and desktop environment under IT Management direction.
Primary Responsibilities for the Role
Update and maintain computer inventory and surplus equipment. Maintain and resolve issues on LAN/WAN, VoIP telephone, Biometric, Video systems and other computing equipment.Ensure desktop computers interconnect seamlessly with diverse systems.Interact with vendor support contacts to resolve technical problems with desktop computing equipment and software.Recommend and implement upgrades on systems to ensure longevity.Assess functional needs to determine system purchase specifications.Identify and repair hardware and network connectivity issues.Establish VPN access for all remote users.Assist in technical upgrading and maintaining of entire desktop systems.Support in testing and deployment of new applications and systems.
Minimum Qualification and Experience Requirements
Grade 12/ Matric CertificateCompTIA A+ or equivalentCompTIA N+ or equivalentITIL FoundationMCP or equivalentMCSE, MCSA Windows 10, MCSA 365 or equivalent2- 4 years practical service delivery experience in the IT industry; as an IT support or desktop support technician.
In accordance with Adapt IT’s Employment Equity plans and goals, preference will be given to suitable applicants from the designated groups as defined by the Employment Equity Act of 55 of 1998 and subsequent amendments thereto.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zNDUyNDcxNjA5P3NvdXJjZT1ndW10cmVl&jid=1294111&xid=3452471609
2d
1
Technician required for a reputable office automation company based in East London, Eastern Cape
Requirements:
2 years or more industry experienceNetwork and security infrastructure knowledge- CISCO, HP, UNIFI, FOTINETFirewall and IDS/IPS rules, ACLS , VLANS with 802.1XWindows enterprise environmentQualifications in A+, N+Technical knowledge of computers, operating systems and widely used computer applicationsVOIP Experience
Responsibilities:
First-line organization-wide supportRemote or on-site support that may include travellingNetwork and security supportBuild, configure and repair computer hardware and other devicesTroubleshoot to determine the best solution based on a problem presented by a userInstallation and configuration processesWindows enterprise environment experienceInstalling and configuration of Windows 8,10
Should you wish to apply please email your CV through to Kerry O’Hagan at Kerry@profilepersonnel.co.za
Only shortlisted candidates will be contacted. Should you not receive a response within 14 days please consider your application unsuccessful. We will keep your CV on our database for any other relevant roles that may arise.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMDY2NjkxODg/c291cmNlPWd1bXRyZWU=&jid=1704804&xid=306669188
2d
1
SavedSave
Main purpose of the job
Provide customer support by attending routine services (per OEM standards) vehicle repairs, on-road repairs and preventative maintenance in the workshop.
Requirements (qualifications, experience & skills)
Grade 12/Matric/National Senior certificateDiplomaCompleted Mechanic or Electrical qualification, related to Mechanical & Electrical repairs and diagnostic equipmentAdvantage - Certified DAF Master technicianMinimum of 4 years experience in a workshop environmentExperience with Truck repairs is essentialRoadside repair and vehicle diagnosis, Experience in Major component, Mechanical & electrical repairs and diagnostic equipmentIdeal: Previous experience of DAF vehicle maintenance and repairs
Role responsibilities
Diagnose vehicle mechanical faults and repair requirements accuratelyDiagnose vehicle electrical faults and repair requirementsRepair & maintain vehicle/s as assignedConclude job card/s accurately for all workshop activitiesComplete root cause analysis of major component failuresAttend to breakdowns, including stand-by service (day and night)Maintain levels of productivity and efficiency as instructedPerform shift work when requiredManage all Repair Shop Assistants in the workshop and ensure: all tools and equipment is in a safe area before and after usage, and in working orderDamaged tools reported in the workshop, by Service Technicians, are attended to with priorityManage all Repair Shop Assistants in the workshop and ensure the work area is safe prior to starting work
This is an AA/EE appointment and ONLY applications from South African Historically Disadvantaged Individuals (HDI) candidates will be considered.
If you have not received a response within 48 hours of submitting your resume, please consider your application as being unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zOTE4NDY4Njg2P3NvdXJjZT1ndW10cmVl&jid=376544&xid=3918468686
2d
1
SavedSave
Refurbish uplifted equipment from site closuresRefurbishing and servicing all equipment uplifted from sites where necessary or where instructed by the National Field Manager.Repairing of all uplifted equipment and managing the entire repairs processCreating refurbished equipment from unrepairable equipmentGetting involved in the repairs process and filing in where necessary for Workshop AdministrationAssist with managing the repairs queue
Primary Responsibilities for the Role
Repair process
Provide support to the current workshop admins, field technicians and managementRepair all equipment nationally which is uplifted from sitesMake sure stock availability for equipment repairsMake sure all equipment we hold we create refurbished optionsRepair all out of warranty equipmentMake sure the in-warranty repair process is understoodMake sure they understand all suppliers and contactsWork with stock controllers to make sure you have enough workshop spares availableDo all Oracle hardware courses available and stay current with Oracle versions
Refurbishment Process
Meet with the Micros Hardware Manager to be briefed on any special requirements.The Micros Workshop Technician will ensure that, to the best of his/her ability, the project will be completed within schedule.Be able to liaise with Support Staff/ Projects Manager and manage the job assigned or any other dealings that the company deems fit.The WSM must sign for all equipmentThe WSM will test all the equipment and submit the details to Projects for quotingThe necessary servicing, repairs etc. will be done and the equipment stored in the workshop storeroom until it is staged for re-installation, at which stage the staging technician will sign receipt of it.The WSM is to maintain a file on all the equipment moving through the workshop.Any piece of equipment not working after servicing will be deemed to have been damaged by us and the customer will not be charged for the repair (disciplinary action may be taken if necessary).
Support Assistance
The Micros Workshop Technician is required to support the products assigned to him/her.Clients on ‘Stop Support’ are not to be supported without authorization by Management.All support calls are to be logged on the in-house call logging system according to the Micros logging standards.The Micros Workshop Technician to be aware of escalation procedures as communicated from time to time. Escalation procedures may vary for corporate accounts.The Micros Workshop Technician must assess the problem and assign a correct priorityAll logged calls are to b...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS81NDc0NDk3MzQ/c291cmNlPWd1bXRyZWU=&jid=948025&xid=547449734
2d
Save this search and get notified
when new items are posted!