Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Suggested
Results for electronic engineering in Jobs in South Africa
1
SavedSave
Our client in the agricultural sector is seeking an Automation Technician to join their team in Nelspruit.
Responsibilities:
Development of Auto Cad drawings and design.
Complete reports.
Assist with technical projects and Beta Sites as and when needed.
Assist with assembly.
Automation of irrigation dosing units.
Assist with controllers in cabinets with protection devices.
Assist with assembly of radio units.
Testing software and hardware.
Wiring of cabinets and panels
Troubleshooting of controller hardware and software.
Assist with telephonic support to dealers and end users.
On-site support to dealers and end users â?? South Africa and SADC Countries.
Training on DF products, training dealers and end users on the correct usage of the automation equipment.
Assist with the servicing of filter banks and back flush controllers.
Assist with onsite drip installation in South Africa or SADC countries.
Providing training on the products relating to the filters, drip, valves, specific to the installation type and environment of the equipment used.
Requirements:
Matric certificate.
3+ years in a similar role.
Must have good communication skills in English and Afrikaans.
National diploma or degree in electronics/mechatronics.
Drivers license.
ELV electrical systems and VSD/PLC.
An understanding of hydraulics
AutoCAD knowledge.
Problem solving and organizational skills.
To apply, please send your CV with your salary expectations to hannah@personastaff.co.zaPlease note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. By applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request our POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004772/H&source=gumtree
35min
12
Dear Potential Candidate:
Kindly read the ad in detail until the end, before sending your CV.
Do you want to be a part of a company where staff are being respected and hard work and dedication being noticed and appreciated? We offer a work environment where people can grow and based on their performance and commitment can excel within the company.
We are focussed and dedicated and work hard to ensure we meet our targets, to offer annual increases and performance bonuses. We believe that “hard work pays” and we work hard as a team to achieve our goals. Teamwork is one of our core values and we believe that teamwork helps us to grow together and create a working environment where people look out for each other.
If you are an individual who is serious about your future and personal growth, please look at the current opportunity that we have available to grow our team.
We are looking for an experienced individual to fulfil the role as a Technical Site Manager to join our dynamic Projects team. You will be required to manage installations and the teams on site. We operate in the Electronic Security and Building Systems industry and are well established within the industry.
Our market focus is: Electronic Systems including: Access Control, CCTV & Fire Detection Systems and also Network infrastructure.
We require a minimum of 5 years relevant TECHNICAL & MANAGEMENT experience in the same field, this is a definite pre-requisite. Please DO NOT apply if you do not have any technical back ground in the Security and Electronic building systems industry.
If you are aged between 30 – 45 and looking for a new exciting career opportunity, please send your recently updated detailed CV with a recent colour photo and contactable references.
Minimum pre-requisites:
• Minimum of 5 years technical and site management experience in the same industry
• Experience in building relationships with clients
• Excellent communication skills - verbal and written
• High level of attention to detail and accuracy
• Strong planning and organising skills
• Strong interpersonal skills
• Self-managed and self-motivated
• Valid driver’s license
In return for your commitment and dedication we offer:
• a 13th cheque
• Company Vehicle, Cell phone and Laptop
• Pension & disability benefits
• Market related Salary
• Internal & External Product specific training
Please apply by e-mailing a detailed professional CV with references to hr@integratek.co.za
PLEASE NOTE: This position is for Cape Town, our office is located in the Brackenfell area, please DO NOT send your CV if you do not already stay in Cape Town.
Should you not hear from us within 4 weeks, please consider your application unsuccessful. We advertise on a permanent basis to find suitable candidates to expand and grow the company.
Thank you, we look forward to your application
Responsibility:Roles & Responsibilities:
Planning and Project Implementation:
o Ensure proper pre-planning and adjust to the constant changes on site
o Follow the site installation plan of action
o Prepare site for commissioning
o Installation of equipment on site
o Ensure that handover deadlines are met
Site Management:
o Promote safe working practises and ensure safe working conditions
o Manage projects effectively and profitably (Minimize wastage of resources, equipment and cabling)
o Ensure that stock requirements are communicated daily to the stock department
o Ensure accurate commissioning of systems/sites within project budget/time limits
o Ensure high quality level of all installations and workmanship
o Provide supervision of installation team on site
o Ensure effective management of team and resources on site.
o Attend all site meetings
o Correct Technical abilities to complete installations and basic commissioning at a high standard with the focus to get the job done right the first time.
o Ensure that all Vehicles/Tools/Equipment is in working order on site and in your vehicle and that any identified issues are communicated immediately.
Project Admin:
o Detailed capturing of as-built details on site drawings.
o Timeously submit Job Cards for invoicing
o Complete and manage all Health & Safety file requirements on site.
o Detailed daily feedback of active projects.
o Provide email feedback regarding site meetings
o Inform construction supervisor of site delays via email
o Manage telephone and email enquiries in a timely, efficient and professional manner
o Ensure Internal documents are accurate, filed and up to da
o Escalate any unresolved problems or issues of importance to Management
o Ensure that all deadlines are met within the given timeframe
Thank you, we look forward to receive your updated and most recent CV.
1d
1
qualification and experience required:-B.Eng. in Electronic Engineering (with preferable post-grad qualification).0-2 years experience with competence in digital, analog, and RF design.Experience with schematic and CAD design tools, and electronic and RF simulation.FPGA design and development is an advantage.Must be interested in working in the aviation or military product development environment.Responsibilities:Development of RF-based devices and software.Review and adopt industry standards on relevant RF protocols and regulations.Evaluation of devices and software.will assist senior engineers to integrate RF subsystems into larger systems
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzE4NjU0MV9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1789444&xid=1109_186541
1d
1
SavedSave
ResponsibilitiesProvide software solutions to facilitate the design and deployment of control equipment that will enable the organisation to achieve global leadership in the field of electronics blasting systems. This will include the following tasks:To develop and write, components and interfaces, as required.To keep abreast of global developments in embedded firmware, software and internet technology and to provide direction with regard to software development.To integrate the software/firmware development with the business strategy, customer requirements and electronic technology development.To assist the installation and commissioning of new firmware/software into client sites and to interface and satisfy clients in this process. Create system, test and technical specifications for new productsQualifications and expertise required (Must)• BSc. Eng. (Computer) / BEng (Electronic) / BSc. Eng. (Electronics) / Equivalent• At least 5 years’ experience in the skills listed below:• C development experience• Firmware development experience in C• Software architecture experience• Ability to read/interpret schematics and debug embedded platforms• Familiarity with software revision control systems and code review techniq
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE4MjQyM19fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1789250&xid=1108_182423
1d
1
SavedSave
Our client currently has a vacancy for the above position and wish to invite suitably qualified applicants to submit their details for our consideration.
Ideally the successful incumbent should have
Matric, grade 12 or equivalent qualification together with a minimum of 2 years’ experience in the repairing of digital and /or RF equipment to component level in technical repairs;Computer Literacy with at least the ability to work on Word and Excel in the Microsoft Office suite;A working knowledge and understanding of Application Software, Barcode Label Printing software and WLAN;Familiarity with Microsoft Windows operating systemsSMD component soldering skillsA good team player with above average communication skills both telephonically and in person.Proven experience in successfully interacting with customers;The ability to handle multiple responsibilities at the same time;Self-driven and enthusiastic with a strong customer service orientation;English literacy and numeracy of at least a Grade 12 level;Ability to handle all repairs according to strict deadlines;Willingness to travel for work as and when required;Professional and presentable appearance; andValid Driver’s License
The successful incumbent, will report to the Technical Manager and the responsibilities of the position include:
Perform electronic and mechanical repairs to productsProvide consultation support for installationsUndertake installations when requiredMember of the Workshop Team to provide post – sale support to company staff, business partners and end-usersMinimum 2 years repairing digital and /or RF equipment to component levelSMD component soldering skillsPersonal computer, standard office equipmentMultiple and changeable prioritiesOccasional stressful customer interfaceGood verbal and written English skillsStrong telephone skills and courteous telephone mannerEffective and tactful communication with customers, sales and other departmentsFamiliarity with Microsoft Windows operating systemsRepairs in a timely, neat and accurate manner of all defective hardware sent to the workshop by customersConfigures and test sales demo systems per demo request instructionsPerforms occasional service calls at customers locationsComplete all required documentation in accurate and legible fashionResponsible for good housekeeping and safety practicesA person who can work on his/her own with minimum supervision
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMzAyOTYxMTg5P3NvdXJjZT1ndW10cmVl&jid=1719463&xid=2302961189
1d
1
SavedSave
Our client is a successful Fintech located in the Northern Suburbs of Cape Town, that has grown by implementing new ideas and equipment in the payment processing industry to enrich payment solutions with automation and great tech.
A detail-oriented, analytical Supply Chain professional with a deep understanding of supply chain processes and technical expertise in device repair is required. The successful candidate will be a hands-on leader with a strong focus on optimizing processes and driving performance excellence in a dynamic and regulated environment.
Primary competencies:
Relevant qualification in Business Administration, Supply Chain Management, Engineering, or a related field (or equivalent experience) – preferred.Proven experience in logistics and inventory management, device repair, preferably in a supervisory or managerial role.Experience in diagnosing and repairing electronic devices.Strong knowledge of supply chain principles, inventory control methodologies, and logistics processes.Proficiency in using inventory management software, data analysis tools, and device diagnostic tools.Excellent communication, leadership, and interpersonal skills.Problem-solving mindset with a focus on continuous improvement.Knowledge of fintech industry standards and practices is a plus.
Responsibilities:
Inventory Management and ERP:
Develop and implement inventory control strategies to optimize stock levels while minimizing carrying costs and stockouts.Conduct regular inventory audits, cycle counts, and reconciliations to ensure data accuracy and maintain an up-to-date inventory record.Monitor inventory discrepancies and initiate escalation protocols when necessary.
Logistics Coordination:
Oversee the planning and execution of inbound shipments and outbound deliveries, ensuring timely delivery of goods to meet customer demands.Collaborate with suppliers, freight forwarders, and carriers to resolve any transportation-related issues.Continuously assess and improve transportation strategies to enhance cost-effectiveness and reduce delivery lead times.
Device Repair Services:
Lead the device repair team in diagnosing and repairing client payment devices in a timely and efficient manner.Implement standard repair procedures and quality control measures to ensure consistent and reliable repairs.Monitor repair turnaround times and maintain a high level of customer satisfaction with device repair services.
Team Leadership:
Supervise, train, and mentor logistics, inventory, and device repair staff, fostering a positive ...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNjUxMjI4MDQ4P3NvdXJjZT1ndW10cmVl&jid=1748695&xid=1651228048
1d
1
SavedSave
Overview:
An automotive company based in East London IDZ is looking for an Electrical Technician with PLC experience, within the Manufacturing environment, to join their team.
Minimum requirements:
Trade Test Qualification (Electrician/ Millwright) or Electrical Engineering Diploma3-5 years in an automotive, manufacturing environmentPLC experience essentialServo Drives and MotorsSwitchgear and logic knowledge
Responsibilities:
Attending to all breakdowns in the plant with the replacement of worn and damaged components and support production with reinstating equipment, jig fixtures and testing equipment to the intended operational state.Attending to and supporting preventative maintenance tasks which includes the definition and work required to ensure uptime of equipment, jigs fixtures and testing equipment and support the administrative documentation and follow-up work required thereof.Participate and Support CI ProjectsAttend to any building maintenance as is needed from time to time which includes housekeeping in the workshop and respective production/ plant areasAdministration of critical spares and the electronic maintenance system which includes ordering and stock levels of the prescribed componentSupport the installation and commissioning of equipment jigs fixtures and control systems related to new program launches and participates in the team in all related activities which includes quality, OHS and productivity activities and verifications thereofParticipation in system audits of the areas of responsibility related to ISO 14000 and IATF and support corrective actions from agreed improvementsAny reasonable tasks as given by direct report and management
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMTg0ODYyNjg4P3NvdXJjZT1ndW10cmVl&jid=1584175&xid=3184862688
1d
1
SavedSave
Business Development Manager required for a reputable industrial automation company based in East London , Eastern Cape
Requirements:
A tertiary qualification in electrical or mechanical engineering or similar qualification would be advantageousPrevious experience in an industrial automation environmentWilling and able to travel from time to time (Local & international)Consult with clients, vendors and personnel to discuss and formulate estimatesConfer with engineers, owners and subcontractors and adjustments to duration of projectsSet up cost monitoring and reporting systems and procedures
Duties and Responsibilities:
Lead and be responsible for satellite office of the company and to represent the company in selling, installing and supporting machinery.Interface with current and potential customers on a regular basis.Be involved in project planning and execution.Oversee work of technical installation teamVisit regular and prospective client businesses to establish and act on selling opportunitiesMonitor customers changing needs and competitor activitySupervise on-site employeesInstall electronic systems meeting standards and codes
Should you wish to apply please email your CV through to Kerry O’Hagan at Kerry@profilepersonnel.co.za
Only shortlisted candidates will be contacted. Should you not receive a response within 14 days please consider your application unsuccessful. We will keep your CV on our database for any other relevant roles that may arise.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yOTQ4OTgzMDM5P3NvdXJjZT1ndW10cmVl&jid=1755014&xid=2948983039
1d
1
SavedSave
bachelor in IT/Telecom/Electronic engineering 10 years experience supervision experience
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE4MDkzM19fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1786641&xid=1108_180933
1d
1
SavedSave
bachelor in IT/Telecom/Electronic engineering 10 years experience supervision experience
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE4MDkzMl9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1786640&xid=1108_180932
1d
1
Job Description and Responsibilities:
Repair faulty equipment and parts i.e., welding guns, servo-pneumatic valves, transmission modules, tucker guns, sealer equipment to ensure availability of spare parts and equipment (spare part management).Resolve robotic electronic communication faults by adjusting the robotic program to prevent re-occurring robot communication faults and ensure uninterrupted production process.Analyse, fault find, repair and optimise sealer, toxing, welding, laser, bolting and rivet joining technology equipment failure to ensure achievement of quality requirements and efficient production process.Analyse PLC programs to resolve errors and determine root causes of Interbus or Profinet network errors, determine corrective actions to continue with the Production process and ensure uninterrupted Production run.Fault find, set up and program SEW drives by using the appropriate diagnostics software/tools such as Movitools, Motion Studio to ensure uninterrupted Production run.Modify, update and improve diagnostic software on HMI to identify the faulty equipment to facilitate speedy resolution to Production stoppages.Analyse and investigate severe or reoccurring Production stoppages to determine the real root cause of the stoppage and determine the appropriate preventative action and counter measure to ensure that the reoccurring of the fault are eliminated and/or prevented.Contact equipment suppliers and technology experts within the company to enquire regarding solutions to complex equipment problems and failures to ensure pending or reoccurring faults are eliminated or prevented.Document Production stoppages, severe breakdowns, problem sheet, Knowledge Management System, TPM Sheets and PM schedules to ensure all maintenance activities are documented, distributed and knowledge is retained, made available and utilized to prevent future stoppages or breakdowns.Conduct root cause analysis of all breakdowns immediately after completing the breakdown, by analyzing the situation, causes, countermeasures and actions, ensuring that all is recorded and reported on required control sheets and documents.Ensure that the robot Safety circuit is in good working order and that all the required condition that meets the safety standards is installed.Download robot and PLC program backups to ensure quick recovery of the facilities in the event of a loss of data.
Education and Experience:
A National Nated Diploma/ National Diploma/ B Tech/B Eng./ B Sc. Degree in Electrical Engineering/ Mechatronics.At least 5 years in vehicle manufacturing maintenance and/or technical environment.
Skills, Attributes & Other requirements:
Siemens PLC and robot training would be a distinct advantage.Able to read E-Plan Electrical and Pneumatic drawingsHa...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zNjA3NTg1MjkwP3NvdXJjZT1ndW10cmVl&jid=1427992&xid=3607585290
1d
1
SavedSave
Responsibilities:New Product Development & ProductionApproval (APQP) of new materials, components & systems in electrical commodity (wiring harnesses, electronic modules, motors, etc.)Provide Supplier Quality requirements for all new business sourcing decisions and business transfers (BTAB) affecting local suppliers to achieve company objectives in terms of quality, technology and priceKey member of sourcing team in support of Supplier Nomination / Selection processSupplier Quality performance monitoring and implementing continuous improvement initiatives
Drive rapid product issue resolution with suppliers for all supplier manufactured causesConduct regular supplier audits on quality management systems and processes to ensure supplier manufacturing controls consistently meet qualityrequirementsImplement product and/or process changes at suppliers, and ensure they are effectively managed / executed without disruption to supply while meeting company quality and engineering standards
Requirements:Mechanical, Quality or other related Engineering qualification with an additionalNQF level 4 minimum in Machining & ToolmakingMinimum 5 years’ experience in tool & die fabrication in the stampings commodity with a strong desire and/or exposure in the manufacturing qualitysystemsMinimum 10 years’ experience in automotive manufacturing process and component developmentExtensive knowledge of Quality Management Systems such as IATF16949,ISO9001, VDA6.3, etc.Proven Manufacturing Quality Systems knowledge including lean manufacturing conceptsThorough understanding of Process Failure Mode & Effects AnalysisKnowledge in automotive supplier manufacturing processes and controlsThorough understanding of Advanced Product Quality Planning (APQP) including detailed knowledge of Production Part Approval Process (PPAP) for automotive components and systemsWorking knowledge of Geometric Dimensioning and Tolerancing (GD&T)
Requirements:English oral and written communication skillsAbility to confidentially present to large forums and in front of Senior Leadership of the company and at the supplier baseStrong negotiation skillsAbility to influence others to gain cooperation and ability to deal with ambiguityInterpersonal savvyLearning on the flyDrive for results, high degree of planning, creative ability and disciplineStrong strategic agilityGood technical knowledge in automotive electrical commodity, systems and componentsHighly analytical, able to conduct root cause analysis and apply problem solving techniquesGood Problem Solving skills (8D, 5 Why’s, Ishakawa , Red X, etc.)Extensive knowledge on manufacturing techniques and processes used in manufacturing electrical compone...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNDkzMjk2NDM2P3NvdXJjZT1ndW10cmVl&jid=1310497&xid=1493296436
1d
1
Opportunity Available!! Our leading client in the Manufacturing Sector is looking to employ a Process Control & Development Automation Engineer to join their dynamic team in Middelburg.
Job Description:
Identify problem areas requiring improvement as directed by business KPI’s
Quantify the underlying contributory causes to the problems
Study the problem at the hand of the contributory causes and propose solutions
Implement solutions including automation, mistake proofing, manufacturing procedures etc.
Sustain and continuously improve performance through the automated systems and processes.
Plan, direct and co-ordinate hot rolling process improvements linked to PC&D systems to improve quality, efficiency and availability.
Investigate all modelling and control system failures and associated deviations to implement corrective and preventive actions.
Implement solutions to assist with process and product development in association with Level 1 or 2, Technical and Production departments through consultation with other disciplines/departments.
Maintain and develop the following systems:
Heat transfer modelling (finite element heat transfer Level 2 model) and combustion systems (Level 1).
Rolling modelling (Level 2): Speed, temperature, forces, torques and flatness control models (including neural network).
Level 1 thickness, flatness, strip cooling and coiling mostly feedback control systems.
Expert System for continuous process parameter optimisation of the heating and rolling processes (including Fuzzy Logic).
Weekly standby on a rotational basis with the other PC&D team members.
Ensure compliance with the goals as defined in KPIs.
Identify problems, investigate solutions and solve problem in order to achieve those goals.
Constantly co-ordinate process deviations with all relevant parties.
React and correct all substandard process conditions
Job Requirements:
BEng (Electrical, Electronic, Metallurgical or Mechanical) or Computer Science, Computer Engineering, or related field.
Experience in Software development (C, C++, C#, Visual Basic, etc), specifically in the engineering control software field.
Knowledge of Level 2 type first principle models for heating and rolling technology.
Knowledge of how these Level 2 models are automatically calibrated using artificial intelligence or other simpler methods.
Knowledge of control systems and instrumentation is a plus.
Creative and strong problem-solving and analytical skills.
Experience working in a manufacturing or industrial environment is a plus.
Enjoys working in the field of engineering solution development.
SECTOR: Manufacturing
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93ZWJhcHAucGxhY2VtZW50cGFydG5lci5jb20vd2kvYXBwbGljYXRpb25fZm9ybS5waHA/aWQ9c3RhZmZzb2xzJnZhY2FuY3lfcmVmPUUuTDAwMjA5Mi9CRw==&jid=1816615&xid=E.L002092/BG
1d
1
Our client in the engineering and technical sector is looking for a Temp Treasury Analyst/Personal Assistant to join their team based in Cape Town (Northern Suburbs) - 3 month project
Duties:
Provide administrative support to the Africa Ledger Controllers to manage the Banking Documents under the supervision of Africa Treasury Manager viz.
Preparation of all Banking Documents (opening or closing bank account, update Bank Signatories, and any other bank related documents)
Update and maintain log of Bank Signatories and Online Bank Users
Ensure that the Bank Signatories and Online Bank Users are executed with the Bank in accordance with the Banking Power of Attorney (POA)
Perform daily cash management functions, determination of cash position, funds transfers, analysis of borrowing needs and available funds
Consolidate the monthly Africa Region Cash Forecast, including variance analysis. To work closely with Africa Ledger Controllers and provide analysis and quick feedback of results
To issue Guarantees/Bonds and Letters of Credit (LC’s) including monthly tracking and reconciliation thereof
Analyse Africa Region Bank Services and related Fees and make Treasury optimization recommendations
Administer and Support the management of the Corporate Credit Card Programme including conducting quarterly reviews
Administer, Co-ordinate and Support the amendments to the Electronic Banking (EB) Users across the various banking platforms, we use in the Africa Region
Requirements / Qualifications:
Bachelor Degree in Business Administration or Finance, Accounting or related field (Advantageous)
1-2 years relevant experience in banking and/or treasury operations, previous experience in a Corporate Treasury environment would be advantageous.
Fluent in English
Experience with Bank Documentations
Computer literacy (including good command of Microsoft Office: Excel, Word, Outlook and PowerPoint)
Highly detail orientated and organized in work
SECTOR: Engineering & Technical
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93ZWJhcHAucGxhY2VtZW50cGFydG5lci5jb20vd2kvYXBwbGljYXRpb25fZm9ybS5waHA/aWQ9c3RhZmZzb2xzJnZhY2FuY3lfcmVmPVBFMDA1ODc3L0tC&jid=1800839&xid=PE005877/KB
1d
1
Permanent position based in Somerset West for an Executive Manager: Product Development.
Minimum Requirements:
Minimum: B.Sc. / B.Eng. in Electronic or Mechatronic engineering. Masters Degree in Engineering preferred.Minimum 10 years’ experience in the field of Systems Engineering, Guidance Navigation and Control of weapons.Proven Systems Engineering experience in leading major development programs for guided weapons.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNzA3ODA0Nz9zb3VyY2U9Z3VtdHJlZQ==&jid=881109&xid=27078047
1d
1
SavedSave
QUALIFICATIONS NEEDED
Diploma in Electrical Engineering or equivalent
NECESSARY EXPERIENCE & INDUSTRY ACCREDITATION / KNOWLEDGE
4 to 5 years relevant experience within a vaccine / biotech industry or equivalentSpecific machinery understanding and operational manufacturing experience within a similar environmentSound technical ability and hands on approach on maintenance activitiesExperience in having faced successfully local and international quality audits would be advantageous
KEY DUTIES & RESPONSIBILITIES OF THE ROLE
Ensure Utilities are maintained and servicedResponsible for monitoring of all systems that operate 24/7 and will be primarily responsible to respond to a breakdownEnsure service providers adhere to cGMP and Bio-safetyDraft and update relevant departmental SOP’s (Standard Operating Procedures) timeouslyUnderstanding on the principals of PLC’s, VFD’s, HMI’s and safety circuitsRead control panel electrical diagrams and correlate to installed partsTroubleshoot and fault find on control circuits and be able to find solutions to solve current issues or prevent future issues from occurringPerforms complex technical functions in support of engineering activities such as set up, operation, maintenance, modification, circuit testing, calibration and troubleshooting of electronic or electromechanical components and systems, experimental design circuitry, prototype models or specialized test equipmentWorks from schematics, diagrams, written and verbal instructionsConduct complex engineering tests to collect design data or assist in general research workAssist in the development of electronic equipmentAdjust and replace defective or improperly functioning circuitry and electronics components, using hand toolsRepair or modify cables and equipment returned by operational users or by personnel in the associated test and development areasAssemble experimental circuitry or complete prototype model according to engineering instructions, technical manuals, and knowledge of electronic systems and componentsRecommend changes in circuitry or installation specifications to simplify assembly and maintenanceAnalyse and interpret test dataAdjust, calibrate, align, and modify circuitry and components and records effects on unit performanceWrite technical reports and develop charts, graphs, and schematics to describe and illustrate system consideration by engineers in broader determinations affecting system design and proceduresUpgrade software and running software tests on existing electronic systemsMaintain detailed records of validity tests and upgrades perfo...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zNDM4MDA3NzM0P3NvdXJjZT1ndW10cmVl&jid=370514&xid=3438007734
1d
1
SavedSave
The Project Execution Manager is responsible for managing the technical execution and project implementation of Integrated Electronic Security and Life Safety Solution projects. The Project Execution Manager acts as technical solution expert on assigned product lines providing input to sales, operations and other functions within the organisation. This role is expected to make sure all Project Engineers have the correct training and expertise required for the organisation. The Project Execution Manager is expected to offer guidance and support to all Project Engineers to help them achieve and exceed targets. The Project Execution Manager is expected to evaluate new product lines and provide input to senior management on product line strategy.
Minimum Requirements (What we need from you)
• Bachelor’s degree / diploma in engineering or information technology from a reputable institution• 5+ years’ experience in security technology environment• Experience with IP Video Surveillance, Access Control and Fire Detection & Suppression Systems• Experience with managing and training employees• In-depth/Expert understanding of IT Hardware and physical networks – N+, INet• In-depth/Expert technical understanding of IP Video Surveillance, Electronic security hardware and software platforms, Public Address, Fire Detection Systems preferred.• Outstanding communication, organising and time management skills• Ability to manage employees.• Ability to work under pressure.• Customer centric approach• Strong problem-solving skills, team player and a high degree of creativity/resourcefulness• Passion, determination, with a high energy level• Willingness to travel extensively within Sub-Sahara Africa and LATAM. At least 50% travel• Working Knowledge of MS Office based products, outstanding understanding of MS Excel required.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMDQzMjcyMjI5P3NvdXJjZT1ndW10cmVl&jid=1687435&xid=2043272229
1d
1
SavedSave
Software Developer: Protocols
Description of Position
General
The company is seeking a passionate and self-motivated software developer to join our growing team of engineers and developers working on our ground-breaking digital radio communication technology.
Your main responsibility comprises the development of embedded software communication protocols. These protocols run on a variety of embedded platforms.
Minimum Requirements
0-5 years of software development experience in a professional capacity.
A degree in one of the following:
Eng Electronic Engineering,Eng Computer Engineering, orSc Computer Science (or similar)
Main Responsibilities
Development of Layer 2 and 3 protocol software components
Specialised Knowledge and Experience Preferred
Experience writing embedded software in C++Experience in developing airborne software according to DO-178Experience in test-driven developmentKnowledge of the OSI stack paradigmExperience with VOIP implementation on H.264Experience with IP and L3 Routing/MANET implementations
Soft Skills Preferred
Good problem-solving skillsTeam playerGood communication and interpersonal skills
Work Environment
We provide a stimulating and engaging environment where we pride ourselves on our high standards (both in terms of employees and products). You will have the freedom to advance your career in a workplace where individuals of ability and application have the support to develop rewarding careers.
Some of the benefits of a career with us include:
Work on cutting-edge technology, new and existing standards and company proprietary productsOpportunities to gain invaluable knowledge and expertise from senior company employees who are experts in their respective fields and are eager to mentor co-workersAssistance with post-graduate studiesPossible international travel opportunitiesFlexible working hoursYou will receive a daily lunch (not during Covid-19 restrictions)
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yOTU1ODI4NTQxP3NvdXJjZT1ndW10cmVl&jid=375954&xid=2955828541
1d
1
SavedSave
The Project Engineer is responsible for design, management and technical execution of Integrated Electronic Security and Life Safety Solution projects. The role is expected to manage technical installation teams assigned to them on a project(s). The Project Engineer acts as technical solution expert on assigned product lines providing input to sales, operations, and other functions in the organisation.
Minimum Requirements (What we need from you)
• Bachelor‘s degree / diploma / certification in engineering, networking, software development or information technology from a reputable institution• Highest technical. Level of Avigilon, Gallagher and Impro (IXP400 and Portal) Certification• 5+ years’ experience in a technology environment, specifically Enterprise Video Surveillance, Networking, System Integration and Access Control• In-depth/Expert understanding of IT hardware and physical Networks -N+, INet• In-depth/Expert understanding and Certification on Avigilon IP video surveillance, Gallagher and Impro (IXP400 and Portal) Access Control and Biometrics, Electronic Intrusion hardware and software platforms, Electric Fence, Intercom Systems. Knowledge of Public Address, Gas Suppression and Fire Detection Systems will be advantageous.• Outstanding communication, testing, fault finding and time management skills• Ability to work after hours and under pressure• Customer centric approach• Strong problem-solving skills, team player and a high degree of creativity and resourcefulness• Passion, determination with a high energy level• Willingness to travel extensively within Sub-Sahara Africa and LATAM.• Highly computer literate with the ability to work with big data and• Excellent command of the English language and have the ability to draft professional technical documents and reports
• Experience with Enterprise Video Surveillance and Access Control an absolute must• SAQCC registered fire detection and fire suppression specialist a definite advantage• Technical Certification on Gallagher, Impro and Avigilon a must• Must be a team player and be able to lead well within a team environment• Provide support and training to junior staff• Conduct monthly KPI’s with Technical Staff• Willingness to work with Technical Teams and get your hands dirty when necessary
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xOTM2NzQxMjI0P3NvdXJjZT1ndW10cmVl&jid=1687434&xid=1936741224
1d
1
SavedSave
Software Engineer: DSP
Description of Position
General
The company is seeking a passionate and self-motivated software engineer to join our growing team of engineers and developers working on our ground-breaking digital radio communication technology.
Your main responsibility shall be the design and development of embedded DSP software relating to digital communication systems, with a focus on waveforms for wireless communications.
Minimum Requirements
0-5 years of software development experience in a professional capacity.
A degree in one of the following:
Eng Electronic Engineering orEng Computer Engineering
Main Responsibilities
Implementation, verification, and optimisation of waveformsDevelopment of digital communications software componentsResponsible for understanding the relevant standards and requirements specificationsDeveloping software in accordance relevant standards and requirements specificationsApplication of digital signal processing techniques such as modulation and synchronisation
Specialised Knowledge and Experience Preferred
Experience developing embedded applications with C++Experience with the Code Composer (TI) stackExperience in waveform design, modulation techniques, error correction and the likeExperience with digital signal processing development processes and toolsExperience with DO-178 development process
Soft Skills Preferred
Interest in digital signal processingGood problem-solving skillsTeam playerGood communication and interpersonal skills
Work Environment
We provide a stimulating and engaging environment where we pride ourselves on our high standards (both in terms of employees and products). You will have the freedom to advance your career in a workplace where individuals of ability and application have the support to develop rewarding careers.
Some of the benefits of a career with us include:
Work on cutting-edge technology, new and existing standards and company proprietary productsOpportunities to gain invaluable knowledge and expertise from senior company employees who are experts in their respective fields and are eager to mentor co-workersAssistance with post-graduate studiesPossible international travel opportunitiesFlexible working hoursYou will receive a daily lunch (not during Covid-19 restrictions)
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zNDI5MTY1MTU3P3NvdXJjZT1ndW10cmVl&jid=375957&xid=3429165157
1d
Save this search and get notified
when new items are posted!