Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Suggested
Results for it technician jobs in Jobs in Port Elizabeth
SavedSave
Alarm Installer / Technician Required with Experience.Must be PSIRA Registered and have Valid Drivers License.Please Email CV to seagatesales@mweb.co.za
1d
1
SavedSave
Well established automotive company based in Sandton within the Audi Brand department, the successful incumbent will be responsible to improve the turnaround time on the repairing of complicated customer complaints and uplifting of the technical skills in the Dealer Network. To ultimately assist with the improvement on Customer satisfaction and reduction of repeat repairs.Job Description and Responsibilities:Plan, prepare and do technical Dealer analysisFlying nationally to repair complex problems to the correct safety and quality standards on vehicles at Audi Dealers.Performing root-cause analysis of complex vehicle problems and providing assistance in developing Dealer training content and material to address shortcomings.Planning and preparing Dealer analysis, identifying weak areas in the Audi Dealer Network on Technical issues and non-conformance to the Audi Service Core Process.Ensuring the most economic method of diagnosis and repair is available to the Audi Dealer Network.Assess training needs and recommend actions.Analysing technical skills gaps at the Dealer and conducting in-house training at Dealer level.Analysing tools and equipment status at Dealer level and recommending corrective actions.Reporting to Audi SA and Audi AG on the technical requirements for the Audi Dealer Network and recommend specific training programs to address the identified short comings.Up-skilling the Audi Dealer Network on vehicle diagnosis process.Developing and implementing a user-friendly feedback loop for guided fault finding telematic support for the Dealer NetworkLiaising between Audi SA, Company Group Technical Support Centre and Audi AG.Establish a working relationship with Technical Support Centre and Customer interaction Centre.Implement a process of identifying weak Dealers based on the information from TSC and CIC. Agree on the Dealers that need attention with TSC and CIC.Implement regular scheduled meetings with TSC / CIC to follow up on actions taken and agree on next actions.Together with TSC / CIC plan for and ensure that high profile customer cases are given priority.Providing support with the preparation of new model launch vehicles.Providing support with reference to the Repeat Repair reduction programme.Reporting to Audi AG / Audi SA Management.Implement systems of reporting to Audi AG / Audi SA Management on Dealer Network progress and status on actions conducted by the Flying Technician.Integrate the Regional After-Sales Manager in the Dealer visits to ensure that action plans are properly implemented and monitored.Education and ExperienceB.Sc. Electronics or equivalent 3-year tertiary qualification from a recognised tertiary institution.Minimum of 3 years post-graduate experience related to mechanical and electrical fault finding and development of technical, solutions.Previous experience in dealing with automotive product support issues of a technical nature Skills, Attributes & Other requirementsLiterature authoring skill in any Windo
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzE4MzM3MF9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1777279&xid=1109_183370
3d
SavedSave
Job descriptionResponsibilities:Provide technical support to our clients' IT systems, including servers, networks, and applications.Collaborate with other technical teams to design, implement, and maintain IT systems and infrastructure.Monitor and troubleshoot system performance, identifying and resolving issues quickly and effectively.Perform regular system maintenance and updates to ensure optimal performance and security.Develop and maintain documentation, including standard operating procedures, system diagrams, and user manuals.Actively participate in client meetings to provide technical expertise and recommendations on IT-related issues and projects.Resolve complex technical issues escalated from Tier 1.Document and track issues in the ticketing system.Collaborate with Tier 3 on advanced issues.Qualifications:Basic IT certifications such as CompTIA A+, N+ and Microsoft certifications and ITIL.Strong technical skills and familiarity with advanced IT concepts and technologies.Excellent communication and problem-solving skills.Proficiency in operating systems, with a strong knowledge and experience in Windows Server.Expertise in deploying, managing, and troubleshooting virtualisation platforms such as VMware, Microsoft Hyper-V.Understanding how to deploy, configure, and manage resources on Microsoft Azure.Proficiency in networking fundamentals, including TCP/IP, DNS, DHCP, VLANs, subnets, routing, and switching.Experience with Active Directory and identity management, including user and group management, domain controller administration, and group policy management.Knowledge of storage systems, including SAN, NAS, RAID configurations, and storage protocols (iSCSI, Fibre Channel).Familiarity with security fundamentals, access controls, authentication mechanisms, encryption, vulnerability management, and security frameworks and compliance standards.Expertise in monitoring and troubleshooting methodologies to diagnose and resolve complex system problems.Proficiency in documenting system configurations, processes, and troubleshooting steps.A willingness to learn and expand knowledge in the field of systems engineering and stay up to date with new technologies.Why Join IPT Holdings?Opportunity to work with advanced technologies and solve complex IT challenges.Ongoing professional development and training opportunities.Collaborative work environment with a talented team of IT professionals.Career growth prospects within a rapidly expanding organisation.Must have a valid South African driver's license and own transport.Join our Port Elizabeth team and take your Systems Engineering career to the next level!We look forward to hearing from you!Applications can be forwarded to johan.k@ipth.co.za
3d
1
SavedSave
National automotive component manufacturer is looking for a Maintenance Technician / Handy Man for their PE operation. Experience in a maintenance environmentExperience in steel fabrication from drawingsWelding experienceFitting and machining experienceElectrical knowledgeGeneral engineering skillsExperienced in machine tool repairIR/Health & Safety/HousekeepingWilling to work shifts from time to time
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzkwMDcwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1223679&xid=1109_90070
2y
1
SavedSave
Our client in the Research Industry / Sector, has a position available in their organization for an IT Operations Manager, based in Port Elizabeth / Gqeberha. The IT Operations Manager is responsible for managing IT governance, data protection, system security, storage management, hardware infrastructure, project management and the day-to-day management of the IT Operations team. An awesome opportunity awaits! Requirements: Information Technology or Information Systems Degree .5-10 Years managerial experience in an IT Operations environment.Passionate – inspires and motivates others to achieve their best.Innovative – constantly aware of changes, spotting them early and responding to them proactively.Service Driven.Collaborative and Respectful.Great Communication Skills.Great Coaching Skills.Numerical Accuracy.Analytically Driven. Responsibilities: IT Governance: Engage in identifying, preparing, and executing business goals with senior management Data Protection: International data protection compliance.Ensure data is handled, transferred, and processed according to legal and company guidelines.Network infrastructure: Maintain and optimize local and cloud-based company networks and servers.Security: Responsible for device and password management.Oversee data backup and system security operations (e.g., user authorization, firewalls).Storage management.Hardware Infrastructure: Manage installations, upgrades, and configurations of hardware.Technical Management: Jira Administration.Assess system performance and recommend improvements.Resolve operational issues escalated to IT management.Provide support and guidance to stakeholders via JIRA help desk.IT Costs Management: Manage budgets and expenditure of relevant IT cost areas.Manage contracts with vendors (e.g., development platforms, telecommunication companies, password managers) and software licenses.IT policies and procedures: Develop and maintain best practice IT policies and procedures.Team Management: Manage a small team of Solutions Architects and Technicians.Represent IT at IT Steering Committee Meetings. If you are not contacted within two weeks of applying, please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzY0MzE1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1228125&xid=1108_64315
2y
1
SavedSave
CORE PURPOSE OF JOB The core purpose of this academic support post is to provide technical support for teaching and research activities in the Department of Biochemistry and Microbiology within the Faculty of Science at the Nelson Mandela University. KEY PERFORMANCE AREAS Management and maintenance of microscopes and autopippettes.Management and maintenance of water purification systems.Management of cold rooms.Management and maintenance of bacterial culture collection.Preparation of all requirements for practical teaching of selected undergraduate modules, including planning and testing of practicals, assessing practical reports and being present to provide assistance and guidance to students during each practical, for both Microbiology and Biochemistry practicals at second and third year level.Training of postgraduate students in the proper use, care and maintenance of departmental equipment.Sourcing of CAPEX and other items, consumables, etc necessary for the effective running of the undergraduate and postgraduate programmes.Ensuring student adherence to SHE policies and practises.Other responsibilities as determined by the HOD. CORE COMPETENCIES Culture media preparation.Bacterial culture, identification and enumeration.Food and beverage microbiology practices (including microbial contamination testing, microbial water quality testing).Clinical microbiology practices (including pathogen handling, culture and identification, antibiotic resistance assessment).Microscopy and bacterial staining methods.Preparation of buffers and solutions.Use of spectrophotometric equipment.Use of centrifugation equipment.Knowledge of SHE policies and practises REQUIREMENTS At least a M+3 qualification (National diploma, Degree) or equivalent, with Biochemistry and Microbiology as majors and at least three years of relevant work experience No applications will be accepted after the closing date (25 March 2022). Nelson Mandela University reserves the right not to make an appointment. In considering candidates for appointment into the advertised posts, preference will be accorded to persons from a designated group in accordance with the approved Nelson Mandela University Employment Equity Plan.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5Xzc0MjgxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1189332&xid=1109_74281
2y
1
SavedSave
The main purpose of the position is to instruct and co-ordinate the cash replenishment process for our ATMs, while ensuring that 3rd parties adhere to and uphold our cashing processes while communicating any potential risks and losses. All of this will be done while working closely, communicating and coordinating with the Regional Branch Members to ensure that all activities are 100% aligned.
The position also requires assistance within the Operations by carrying out first line support to clients, dispatching technicians, following up with merchants and dealing with nil transaction sites. In addition the position will also require the individual to provide general office assistance to the branch by performing tasks such as capturing invoices, managing projects and answering the switchboard.
This position will require you to work on weekends and public holidays as per the roster.
*Cashing:*
* Maintaining CIT Uptime & minimising Cashing Downtime
* Ensuring that the RIGHT amount of Cash is in the RIGHT ATM at the RIGHT time – while balancing the risk vs the reward
* Following a forecast and adjusting the recommendations where necessary
* Managing cash efficiencies
* Coordinating and preventing cash outs
* Providing feedback and regular updates
* Escalating and reporting of issues timeously
* Following processes and procedures
* Maintaining risk awareness
*General office administration: *
* scan, copy, fax
* answering telephones
* filing and general office upkeep
* Managing projects
* Query follow up (Saswitch queries, etc.)
* Liaising with various departments both at branch and head office level (i.e.: Cashing department, CRE department, etc.)
*Dispatching:*
* Overseeing the activities of the technicians in specified areas
* Checking all the “critical” errors and resetting the errors where possible, monitoring and informing technicians of new and closed criticals
* Conducting telephonic troubleshooting before dispatching a technician
* Dispatching technicians to sites and prioritising critical sites
* Ensure that all sites are attended to within the SLA.
* Updating the relevant systems with the action plan to get the ATM transaction
* Compiling a dispatch e-mail to technicians and other departments, detailing queries that are not resolved
* Handling the calls from the technician, requesting the activation of keys and updating or logging tickets
* Escalating tickets to relevant departments
* Opening tickets and following up with both internal and external 3rd parties
* Matric / Grade 12
* Completed B.Comm or similar
* Min 2 years reconciliation experience or experience in a cashing or similar position
* Project Management experience will be an advantage
* MS Office (Advanced Excel would be an advantage)
CTC
* Matric / Grade 12
* Completed B.Comm or similar
* Min 2 years reconciliation experience or experience in a cashing or similar
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzM2NTY4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1231126&xid=1555_36568
2y
1
SavedSave
*Reference: CPT005759-GS-1*
SERVICE TECHNICIAN
PORT ELIZABETH
SALARY R19 000 CTC
**Minimum requirements:
**Qualified Auto Electrician
Experience with servicing Truck and Trailer refrigeration units
Bus Air Conditioning units
*
Consultant: Gameedah Stemmet - Dante Personnel Cape Town
Apply via our website (www.dantesa.co.za)(\https:/www.dantesa.co.za\)
If you do not hear from us within 5 days, please accept that your application was unsuccessful*
R 15000 - 19000
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzM4NDkyX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1231684&xid=1555_38492
2y
1
SavedSave
Our client in the Telecommunications / ICT industry is seeking a Field Technician to join their team, based in Port Elizabeth. The purpose of this position is to drive service success that improves customer satisfaction, maximizes customer retention, and increases profitability. This is done by installing and troubleshooting the equipment, advising the customers on how to use the equipment, building relationships with customers, and following company procedures. Qualifications and Education Requirements: Grade 12 required.N+ or A+ certification advantageous.Valid Fall Arrest Certificate advantageous. Requirements: Ability to read and accurately follow installation directions and work aides.Very good communication skills.Good problem-Solving skills.Excellent organizational and interpersonal skills.Attention to detail, accurate and analytical.Must be able to prioritize effectively.Must be able to handle stress very well and work under high pressure.Must be deadline orientated.Must be flexible with working hours. Availability to work shifts and after hours (overtime will be required).Proficient computer use, and knowledge of Microsoft Office.Relevant knowledge of the geographical area. Responsibilities: Travel to clients and high sites.Provide service and customer support during field visits and callouts.Responsible for daily route, workflow, and schedule planning.Install, maintain, repair, and accurately test wireless Internet connections at client’s premises and at the company’s high sites.Diagnose errors or technical problems and determine proper solutions.Responsible for conducting daily vehicle and tool checks.Responsible for ensuring correct stock is on hand for installations, maintenance, and callouts.Accurately configure Ubiquiti and Mikrotik equipment.Carefully and accurately perform all documentation tasks, such as completion of checklists, any service reports required and updating all details in the company’s systems.Operate the company’s vehicles in a safe manner.Follow all company procedures and protocols.Meet all the appointments in each day.Fulfill all the other tasks required.Maintain regular consistent and professional attendance, punctuality, personal appearance, and adherence to relevant health and safety procedures.Required to work with hands.Required to work at heights.Required to work with power tools. If you are not contacted within two weeks of applying, please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzcyODQwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1185254&xid=1109_72840
2y
1
SavedSave
The Electrical Automation Technician will be responsible for installing, maintaining, and developing electrical, process control and automation hardware, software, processing machinery and interfaces to ensure maximum plant efficiency and throughput for food production.A National Diploma in Electrical/Automation Engineering is required, as well as 5 Years’, hands-on process control/automation engineering experience. This position reports to the Senior Production Manager.Duties;Maintain PC/PLC equipment, peripherals, scale heads, etc. to ensure plant availability for controlled feed production;Develop, install and refine existing hardware installations to improve reliability and functionality;Maintain interfaces to ensure (98% availability for feed production;Maintain process control and automation software on PC’s, PLC’s, peripherals, etc. to ensure plant availability;Achieve batching accuracy on all products;Setup and record Variable speed drive setting on all batching augers;Setup and recording of Scale controller settings;Develop, install and refine existing software and control loops to improve functionality;Maintain back-ups of parameter settings applicable to VDS’s, PLC’s, HMI’s etc;Draw up task clarifications of proposed projects involving changes to plant utilization and/or new equipment.Keep hardware firmware updated to latest version and revisionSkills:Adroit Scada and MAPS (Mitsubishi Adroit Process Suite)Allan Bradley PLC Programming and fault findingAllan Bradley HMI Programming and fault findingMitsubishi PLC Programming and fault findingMitsubishi HMI Programming and fault findingDelta HMI Programming and fault findingSetting up and fine tuning PID loopsSQL Databases setup and designTemperature controllersScales and loadcellsEthernet IP – Communication and setup of devices (HMI’s, PLC’s and SCADA PC’s)
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzU2ODQ0X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1209113&xid=1108_56844
2y
1
SavedSave
Port Elizabeth - The Electrical Automation Technician will be responsible for installing, maintaining, and developing electrical, process control and automation hardware, software, processing machinery and interfaces to ensure maximum plant efficiency and throughput for food production.A National Diploma in Electrical/Automation Engineering is required, as well as 5 Years’, hands-on process control/automation engineering experience. This position reports to the Senior Production Manager.Duties;Maintain PC/PLC equipment, peripherals, scale heads, etc. to ensure plant availability for controlled feed production;Develop, install and refine existing hardware installations to improve reliability and functionality;Maintain interfaces to ensure (98% availability for feed production;Maintain process control and automation software on PC’s, PLC’s, peripherals, etc. to ensure plant availability;Achieve batching accuracy on all products;Setup and record Variable speed drive setting on all batching augers;Setup and recording of Scale controller settings;Develop, install and refine existing software and control loops to improve functionality;Maintain back-ups of parameter settings applicable to VDS’s, PLC’s, HMI’s etc;Draw up task clarifications of proposed projects involving changes to plant utilization and/or new equipment.Keep hardware firmware updated to latest version and revisionSkills:Adroit Scada and MAPS (Mitsubishi Adroit Process Suite)Allan Bradley PLC Programming and fault findingAllan Bradley HMI Programming and fault findingMitsubishi PLC Programming and fault findingMitsubishi HMI Programming and fault findingDelta HMI Programming and fault findingSetting up and fine tuning PID loopsSQL Databases setup and designTemperature controllersScales and loadcellsEthernet IP – Communication and setup of devices (HMI’s, PLC’s and SCADA PC’s) Company DescriptionFMCG
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzM4ODI4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1124716&xid=1266_38828
2y
1
SavedSave
Port ElizabethREQUIREMENTSQualified in a recognized trade or relevant tertiary education (Electrical / Mechatronics) degree/diploma2 - 3 years of experience as a control and automation technicianExperience in control and automation, controls software development, networking and plant floor systemsExtensive knowledge and understanding of Body, Paint and Assembly manufacturing operations and equipmentAdvanced computer literacy (PowerPoint, Word, Excel, MS Project; PLC, HMI and Robot software used in plant)Knowledge of OHSH act and its regulations, safety systems and standardsAble to implement and drive standards throughout all shops in the plantExperienced in controls and automation related project cost studies, budget forecasting and control abilityAble to work overtime and rotating shifts as required and must be available after hours when neededGood interpersonal and leadership skills and control and automation project management experienceAble to understand and interrogate control systems designsDemonstrated history of flexibility and adaptability in setting priorities and managing multiple tasks under pressure RESPONSIBILITIESAnalyse PLC, HMI, SCADA and Robot programs for the purpose of fault-finding, modifying, designing and error-proofing machinery and equipmentTroubleshoot and solve various program logic, electrical and mechanical faults on machines to support production, safety and qualityUnderstand electrical drawings, technical manuals, PLC logic and robot programs to troubleshoot machineryAssist and support artisans and technicians with fault finding breakdownsPerform breakdown root cause analysis and develop countermeasures to prevent reoccurrenceDevelop training programs for GIT’s IST’s, artisans and techniciansEstablish and maintain a stockholding of spare parts required to ensure continuous availability for machineryAssist and support contractors with new installations and perform validation after completion of projectsDevelop efficiency improvement initiatives by effectively utilising utilities, materials and resourcesMaintain cost control on budgets for CAPEX and OPEX projectsResponsible for the planning, design, manufacturing, installation and commissioning of all controls and automation elements of tooling, equipment and facilities in support of new model programmes, IT refresh interface, non-product portfolio and major process changesResponsible for equipment safety, ensuring new equipment designs promotes safe work practicesEnsure compliance to company standards and all local and country laws and regulations for safety, health and environment with respect to new projectsResponsible to manage internal employees and contractors to achieve program milestones, driving safety, quality and lead-time imperativesConduct feasibility studies and develop cost estimation studies for new projects related to controls and automation elementsFacilitate equipment and tooling design and buyoff reviews with all key stakeholdersImplementation of e
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzUzMTg5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1200997&xid=1266_53189
2y
1
SavedSave
Our client in the IT industry is currently looking to employ an experienced Cisco Engineer L4. This position will be based in Port Elizabeth. *** URGENT APPOINTMENT *** Purpose of the position: Involved in highly complex environments for installation, configuration and fault management. They provide technical support to clients. This includes remotely supporting client with SLAs to install and configure software and hardware, resolve incidents, perform root cause analysis and adhere to any related processes such as change management. They are also required to provide technical leadership to the team supporting client installations. Responsibilities: Interact with clients.Escalate unresolved problems and issues to the relevant third parties.Delegates lower complexity tasks to engineers and technicians.Assume responsibility for the co-ordination of the activities of the engineers, in line with performance targets, leading by example and monitoring the quality of engineers and technicians work when required.Write reports and proposals and complete and maintain project documentation.Assist with the documentation of standard operating procedures relating to installations and fixes.Act as coach and mentor to more junior implementation engineers and technicians. Requirements: Relevant IT/Computing Diploma/DegreeCisco CCIE – lab qualificationCisco Decentre Networking knowledge and deployment experienceCisco SDA deployment experienceCisco DNAC deployment experienceCisco SD-WAN deployment experienceFortinet SD WAN -knowledgeCisco Meraki – deployment experience8+ year field experience in deployment and support enterprise networks Please consider your application unsuccessful should you not receive a response within 2 weeks of applying.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzQ0NTQzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1140201&xid=1108_44543
2y
1
SavedSave
Our Port Elizabeth based client, a national manufacturing and installation concern is seeking to employ a suitably qualified Senior Refrigeration Technician. The primary responsibility will be commissioning of plants. Candidates applying must have either : a refrigeration trade, or an electrical trade with refrigeration qualification. This is a maintenance and installation role and candidates must have excellent fault finding abilities, must be a self-motivated, with a high work ethic and good discipline. Furthermore, a sound knowledge of refrigeration systems, project management skills, and excellent communication skills are essential. Primary responsibility will be commissioning of plants. International travel (into Africa) - dependent on Covid-19 restriction, may become available. Qualification: Refrigeration trade or electrical with refrigeration experience with 5-10 years’ experienceQualified Trade Tested Electrician with refrigeration experienceValid drivers licenceThis is an awesome opportunity to join a growing and dynamic business! Lucrative salary on offer to appointed candidates - R25,000 - R30,000 depending on experience.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzQ3NDEzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1162803&xid=1108_47413
2y
1
SavedSave
Reference: JC52251
Our client who specializes in budget and luxuries car hire is seeking a tracker technician within the Port Elizabeth region.
Duties include, but are not limited to:
* Fit tracking devices
* Fleet management
* Ensuring the customer is 100% happy with the services provided
Position requirements as follows:
* Must have 5 years experience or more
* Able to deal with management of fleet units
* Able to travel to do installations in other provinces from time to time
* Able to work overtime when required
Should you want to apply for the position, please send through your CV and qualifications to the following email address and use the reference number for the position as the subject of the email
Email: (Email Address Removed)
Should you not get an email from us within 2 weeks, consider your application unsuccessful
*Desired Skills: *
* Interpersonal Skills
* Technical
* Technician
* Tracker
*Desired Work Experience: *
* 5 to 10 years
*Desired Qualification Level: *
* Grade 12 / Matric
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU0XzM4MjBfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1141656&xid=1554_3820
2y
1
SavedSave
Our client is seeking a skilled PC technician who can fix HARDWARE issues. Own car essential. Email your CVs to (Email Address Removed).
*Desired Skills: *
* Ability to fix Hardware issues
* Own car essential
*Desired Work Experience: *
* 2 to 5 years
*Desired Qualification Level: *
* Diploma
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU0XzU1ODBfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1147936&xid=1554_5580
2y
1
SavedSave
Our client is seeking a skilled PC technician who can fix HARDWARE issues. Own car essential. Email your CVs to (Email Address Removed).
*Desired Skills: *
* Ability to fix Hardware issues
* Own car essential
*Desired Work Experience: *
* 2 to 5 years
*Desired Qualification Level: *
* Diploma
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU0XzU1ODBfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1147936&xid=1554_5580
2y
1
SavedSave
Responsibilities:
* Diagnosing and repair all technical faults - multidisciplinary.
* Running diagnostic reports to confirm the quality of the repair and that the fault is resolved.
* Contribution to team success
* Quality awareness and customer focus
* Attention to detail
* Basic administration
Qualifications and Experience Required:
* Matric
* CompTIA A+
* N+ (Preferred)
* 2 years experience as a technician
* Drivers license (PDP will be advantageous.)
Skills and Knowledge:
* Outstanding communication and interpersonal abilities
* Planning and organizing skills
* Attention to detail
* Ability to work under pressure
* Well disciplined & presented individual
* Ability to diagnose and repair hardware faults
* Customer orientated
* Good telephone etiquette
* Customer focused
* Ability to work in a team
* Knowledge of ICT industry
* Product offering software and hardware technical knowledge
* Computer literacy especially in Microsoft applications skills
*Desired Skills: *
* Customer orientated
* Ability to work in a team
* Knowledge of ICT industry
* Ability to diagnose and repair hardware faults
* Attention to detail
* Outstanding communication and interpersonal abilities
*Desired Work Experience: *
* 2 to 5 years
*Desired Qualification Level: *
* Grade 12 / Matric
*About The Employer: *
The General Technician will be responsible for the service, test, diagnosis and repair of Computer Equipment. The Technician also provides technical support to customers relevant to the specific area/discipline. This position is also required to go onsite as required.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU0XzY0NzFfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1151974&xid=1554_6471
2y
1
SavedSave
Established Security Service Company is looking for a technician to join the team in Port Elizabeth , Eastern Cape.Responsibilities:Installation/Repair/Maintenance of Alarm Systems.Requirements:Computer Skills, Valid Drivers License, Min 3 years alarm experience, Psira registered and valid certificate. Email comprehensive CV to bennie@locksecure.co.za and use Tech-EC as reference
3d
VERIFIED
1
SavedSave
JOB TITLE : TECHNICIAN BASED AT : PORT ELIZABETH /RIETKUIL SITEREPORTS TO : MANAGER Job PurposeKolbe blocks is currently seeking and experienced technicianat our Rietkuil Site in Port Elizabeth. The individual will be required toprovide Technical and Maintenance support to our concrete block yard plant. Salary: R10 000 – R15 000 Depended on Experience Position: Temporality review after 3 – 6 months Availability: Immediately Minimum Requirements: Must be a male age (25 – 45 years). Communicate verbally and in writing in English.3. Must have own reliable transport, drivers’ license (Code 8 or Code 10).4. Must have a Grade 12.5. Ability to work long hours if required.6. Ability to meet strict deadlines. 7. Ability to work under pressure. 8. Ability to work without supervision.9. Min3 – 5years maintenance experience within a block yard enviro.10. Ability to do welding (Tig, Mig,).11. Haveexperience working with all hand tools (i.e., grinder, drill, cutting torch,etc).12. Have Clear criminal record. 13. Must be Medically and Physically fit. Working hours will be accordance to days and hours asoperational required, which is generally from Monday to Saturday, Mon - Fri7:00 – 17:00 and Saturday’s 7:00 and 14:00. However, work outside of these daysand hours will be mandatory should there be an operational need. There will be no allowances and company benefits. * Candidate will be required to do a Compulsory 2 – 4weeks trial period. CV’s to be send to Supacrushvacancies@gmail.com *Please use the Job Description in your Subject.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ3NzYxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1179996&xid=1266_47761
2y
Save this search and get notified
when new items are posted!
