Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Suggested
Results for safety jobs in Jobs in Eastern Cape
1
SavedSave
Opportunity Available!! Our leading client in the Automotive Sector is looking to employ an Electrician to join their team in East London.
Job Description:
Installation, repair and maintain factory machinery and building electricity
Preventative maintenance according to job cards and relevant work instruction
Feedback on timesheets for accurate repair data
Ensure that work practices comply with the company SHE procedures and Works Instructions
Adhere to all safety requirements
Job Requirements:
NQF 2+ Qualified Electrician/Millwright
Minimum 3 years as an Electrician in automotive environment
Basic PLC experience
SECTOR: Automotive
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93ZWJhcHAucGxhY2VtZW50cGFydG5lci5jb20vd2kvYXBwbGljYXRpb25fZm9ybS5waHA/aWQ9c3RhZmZzb2xzJnZhY2FuY3lfcmVmPUUuTDAwMjA5NC9CRw==&jid=1816616&xid=E.L002094/BG
14h
1
SavedSave
QUALIFIED MOTOR MECHANIC/EAST LONDON
Our client is seeking a qualified and experience Motor Mechanic to join their team. The ideal Candidate will be responsible for diagnosing, repairing and maintaining vehicles to ensure optimal performance and safety. High-quality service is key.
Min. Requirements
Trade qualification as a Motor Mechanic is non-negotiable (Copy to be submitted with application)
Minimum of 3 years’ experience working as a motor mechanic
Strong diagnostic and problem-solving skills with the ability to troubleshoot complex mechanical and electrical issues
Proficiency in using diagnostic equipment, hand and power tools
Excellent mechanical aptitude and attention to detail
Responsibilities:
Perform routine maintenance services on vehicles
Diagnose mechanical and electrical problems using diagnostic equipment and troubleshooting techniques
Conduct thorough inspections of vehicles to identify issues and determine the appropriate repair solutions
Repair and replace defective parts/components, such as engines, transmissions, brakes, steering systems etc.
Perform engine tune-ups and other advanced repair services needed
Maintain accurate records of work performed, including parts used, labour hours and diagnostic findings.
Adhere to safety protocols and procedures
Provide excellent customer service
The successful Candidate will,
Have the ability to work independently and as part of a team in a fast-paced environment
Be flexible, at times overtime may be required
Have strong communication skills
Have the ability to lift heavy objects and stand for extended periods
Salary: Market related + incentives
Application Process: Online applications will receive preference, https://www.dittojobs.com/jobs/view/1728496810 ensure you upload a head and shoulder photo, alternatively e-mail CV with Trade Qualification, references, valid driver’s license and a recent head and shoulders photo to solutions@workafrica.co.za, ensure you use QUALIFIED MOTOR MECHANIC as a reference in the subject field. Please deem your application as unsuccessful if you receive no feedback after 3 weeksJob Reference #: QUALIFIEDMECHANICConsultant Name: Claire OReilly
2d
1
SavedSave
Responsibilities:Maintaining construction site machinery and warehouse equipment.Conduct regular inspections of machinery in both construction and warehouse settings, diagnosing issues and implementing effective solutions.Develop and implement preventive maintenance schedules for construction and warehouse equipment to minimize downtime and optimize performance.Maintain accurate records of maintenance activities, inventory, and equipment performance for both construction and warehouse operations.Ensure compliance with safety regulations and company policies in both construction and warehouse environments.Minimum Requirements:Minimum of 5 - 6 years of experience in mechanical maintenance, with a background in both construction and warehouse operations preferred.Management experience Proficiency in diagnosing and repairing construction machinery, as well as warehouse equipment such as conveyors, forklifts, and packaging machinery.Knowledge of safety protocols and regulations in both construction and warehouse environments.Excellent communication and interpersonal skills.Ability to work under pressure and adapt to changing priorities.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzE3OTAzMF9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1780034&xid=1108_179030
2d
1
SavedSave
An occupational therapist (OT) working in a mental health environment has a crucial role in helping individuals with mental health conditions achieve their maximum potential in daily living and community participation.Day to day responsibilities will include assessments, group therapy sessions, individual sessions where indicated and patient meetings. Inter-disciplinary teamwork is a crucial part of the day-to-day activities.REQUIREMENTS, EXPERIENCE AND QUALIFICATIONS/TRAINING? BSc Occupational Therapy (community service year completed)? Maintain CPD standing as required by HPCSA? Registered with HPCSA (independent practitioner & INSTOPP/OTASA Membership and Malpractice Insurance? Valid driver’s license and own transport? 2 years or more relevant experience in Mental Health/Addiction environmentKEY COMPETENCIES? Communication? Collaboration? Analysis & decision making? Safety and Quality? Initiative-taking? Flexibility? Willingness to change? Humility? Curiosity? Self-discipline? Perseverance? Driven and self-motivated? Willing to work flexible hours
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzE4NTQ2N19fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1784621&xid=1109_185467
2d
1
Our client is seeking to employ a Registered Nurse Theatre qualified to work in the Medical Theatre as a Scrub Nurse or Anesthetics Nurse.
The private hospital is based in Port Elizabeth in the Eastern Cape (south Africa).
The Registered Nurse will render and promote cost effective, safe quality patient care in accordance with hospital standards and policies.The incumbent will further be responsible for direct and /or indirect nursing care of a patient or a group of patients, for assessing, planning, executing and supervising the implementation of care to meet patients’ needs, is a role model in the delivery of evidence based care and will actively participate in Clinical Governance.
Key work output and accountabilities
To Audit of health records to ensure compliance;Ensure all stock is well controlled and managed, charged and credited appropriately;Keep abreast of current research in the discipline;Practice patient care according to the scope of practice and assumes total responsibility for these activities;Attend handover of report at shift commencement;Communicate effectively with patients/relatives regarding their care;Provide and deliver evidence based nursing care;Effective risk prevention and management;Maintain a therapeutic, clean and safe environment that is free from medico-legal hazards;Adhere to the company Resuscitation and Reanimation policy;Adhere to the company medical waste management principles and all other waste management principles;Maintain a safe working environment in accordance with the Machinery and Occupational Safety Act;Report and act upon potential/actual risks identifiedResponsible for ensuring correct use, cleaning and storage of equipment, reporting faulty equipment;Work effectively and co-operatively with others to establish and maintain good working relationships that are mutually beneficial;Create and maintain a positive environment where the differences of others are recognized, understood, and valued, so that all can reach their full potential and maximize their contributions;Develop collaborative relationships to help accomplish work goal;Keep up to date with the company evolving policies and procedures;Assumes responsibility for own personal and professional development;Participate in unit quality improvement program;Perform other duties requested by unit manager.
Education requirements
Must have the necessary nursing qualifications, Dip or Degree in nursing;Currently registered with the South African Nursing Council;Grade 12 or equivalent NQF Level 4 qualification;Relevant 6 or 12 month Theatre Post Basic qualification.
Experience and knowledge req...
https://www.ditto.jobs/job/gumtree/2679094951?source=gumtree
2d
1
SavedSave
The key job outputs of the function include, but are not limited to:
Carry out machine repairs according to job cards/instructions.
Ensure equipment operational and safe to operate on conclusion of repair. Conduct daily operational checks on all equipment.
Carry out daily inspections on machines/equipment – according to check sheets. Identify possible improvements to machinery/equipment during such inspections. Document and action.
Carry out actions required on Continuous Improvement activities in order to meet timing per action plans.
Complete PM’s and ensure data is captured accurately and timeously in the Maintenance Management System (CMMS – FIIX).
Conduct shift handover to personnel on next shift (concerning current machine status, problems etc.)
Complete all associated documentation e.g., timesheets and toolbox checks.
Assist with other maintenance duties within area of competence as electrical assistant.
Perform any other reasonable duties assigned.
Essential competencies (knowledge/skill) required to perform outputs:
Essential is your completed trade-test as an Electrician.
Essential is the applicants experience in a similar position. +- 5yrs
Working knowledge of Mitsubishi PLC’s.
A good understanding of installation rules, regulations and machine safety systems.
Highly advantageous is the ability to operate and monitor press machines and have a full understanding of production process (stages, quality indicators, scrap etc.).
Essential is the ability to problem solve out of specification results with regards to job requirements – effect on production machinery and end/manufactured product and identify corrective actions.
Essential is a knowledge of press materials (steel)
Good communication skills (English) – both verbal (conversational) and written (basic admin)
Please forward CV and ALL supporting documentation to, caree-lee@profilepersonnel.co.za. Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automatically be added to our database for future vacancies.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMDM0MjQ2ODQyP3NvdXJjZT1ndW10cmVl&jid=1314479&xid=3034246842
2d
1
SavedSave
• Ensure raw material and equipment availability, efficient (OEE) processing of the material into finished product and on-time delivery (Just in Sequence) to the customer.• Ensure that product quality standards are met and comply to all legal regulations.• Responsible for all direct and indirect work sequences in own area.• Regular liaison with the Customer regarding expectations and performance.• Ensure that business operating systems and standards are adhered to as identified by the Quality Department.• Consult daily with other departmental heads in order to ensure smooth work sequences in all shifts.• Manage personnel goals against respective KPI’s.• Recommend new procedures and processes to improve quality and quantity and reduce production costs.• Consult regularly with HR and join Union/Shop Steward Meetings• Plan development of respective employees in order to improve their performance and reach their personal goals.• Develop succession plans for key positions in departments of responsibility.• Ensure Health and Safety regulations are adhered to.• Coordinate and lead activities in servicing, machinery, systems/equipment, facilities.• Ensure on time compilation and reporting on daily, weekly and monthly performance
Required Education
• Relevant degree/diploma with qualification in Production or Engineering• 8 years Managerial experience in a highly pressured production environment• Computer Literate
Desired Skills
• Planning, organizing, controlling skills• Critical thinking and innovation• Excellent interpersonal and communication skills• Decision making/problem solving skills and ability to cope with stressful situations• Conflict handling and dispute resolutions skills
Please forward CV and ALL supporting documentation to, careee-lee@profilepersonnel.co.za. Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automatically be added to our database for future vacancies.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yODE1NjYxMjQ5P3NvdXJjZT1ndW10cmVl&jid=1321108&xid=2815661249
2d
1
Type of Position:Applications from suitably qualified & experienced persons are invited to fill the above vacancy in the companys Production – Paint Shop Department.
Job Description and Responsibilities
Ensuring that all Paint shop electrical installations and PLC systems are maintained to company standards and requirements in order to ensure safe plant operation by means of structured maintenance systems such as PM’s, check lists, weekend work job cards etc.
Recommending, updating and modifying electrical installations to the latest engineering technology in order to stay in line with the latest technologies available on the market by constantly dealing with external suppliers and similar industrial companies.
Maintaining of electrical equipment to meet the required health & safety standards to ensure a safe work environment for all employees.
Making the necessary adjustments to facilities such as conveyor speeds, fan speeds, system pressures, tank levels etc. by means of PLC settings, controller adjustments and thereafter verify that the adjustments produced the required outcome by measuring the output performance/parameters.
Carrying out planned maintenance activities using the correct tools and testing equipment according to company systems, processes and procedures to ensure that all equipment is serviced at the required intervals as determined from time to time by the maintenance planner / original equipment supplier.
Activating participation on daily basis in the Shop Floor Management structure. This includes sectional meetings and problem resolution activities/implementation as driven by the team.
Education and Experience
NN Diploma/ National Diploma/Degree in Electrical Engineering (light current) / MechatronicsTrade test certificate Electrician /MillwrightMinimum 2-4years’ proven operations and maintenance experience within in the manufacturing environmentGood experience in VSD control system (Danfoss & SEW)Automation experience & Certified training (PLC’s Drives, etc.). Advantageous
Please forward CV and ALL supporting documentation to, Caree-Lee@profilepersonnel.co.za. Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automatically be added to our database for future vacancies.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODkyODc4NjAyP3NvdXJjZT1ndW10cmVl&jid=1752796&xid=3892878602
2d
1
Purpose of the Job: Plan, direct and coordinate the operations of the production facility, inclusive of formulating and implementing SOP’s, managing daily operations and full utilisation of plant equipment, raw material as well as people management. In addition to ensure that the plant is maintained in accordance with an approved maintenance programme, including legal and mandatory requirements.
Education, experience and competencies required:• Grade 12 and/or Equivalent.• National Diploma/Degree in Production Management. • At least 5 years’ experience within a Dairy Manufacturing and Packing environment and/or a FMCG/Cold-Chain manufacturing and packing environment.• Fresh Milk, Cheese and Butter experience is a definite advantage.• Valid Driver’s licence, code 08 (EB), without any endorsements.• Proficient in all MS Office applications.• The ability to manage and lead teams towards high-performing production team.• Strong analytical and problem-solving skills.• Excellent administrative and organizational skills, including Project Management skills.• Effective communication skills and change management capabilities.• Detailed oriented.
Key Performance Areas: • Ensure optimal production efficiencies and effectiveness by overseeing the Production Team and processes in line with agreed standard operating procedures, food, health and safety requirements, as well as cost and quality requirements.• Ensure cost effective production through planning, organising and managing the function to support optimal production in line with the designed capacity of the plant, agreed budget, resource plans and targets.• Coordinate and control manufacturing processes and the maintenance on the equipment and machinery.• Accountable and responsible for Manufacturing performance and production outputs and efficient material usage.• Capacity and factory planning.• Staff management, including supervision, training and creating a high-performance team.• Cost and budgetary management and control.• Ensure full statutory compliance to all health and safety and food safety requirements, in line with the relevant standards and SOP’s by ensuring training of relevant persons, audits and corrective active of all findings in collaboration with the Compliance team. • In depth knowledge and the assurance of GMP, HACCP, TACCP, FSSC22000, OHS and affiliated legal compliance framework requirements
Please forward CV and ALL supporting documentation to, caree-lee@profilepersonnel.co.za. Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automatically be added to our database for future vacancies
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zNzc4MzQ1NTE0P3NvdXJjZT1ndW10cmVl&jid=1321106&xid=3778345514
2d
1
Job Description and Responsibilities:
Repair faulty equipment and parts i.e., welding guns, servo-pneumatic valves, transmission modules, tucker guns, sealer equipment to ensure availability of spare parts and equipment (spare part management).Resolve robotic electronic communication faults by adjusting the robotic program to prevent re-occurring robot communication faults and ensure uninterrupted production process.Analyse, fault find, repair and optimise sealer, toxing, welding, laser, bolting and rivet joining technology equipment failure to ensure achievement of quality requirements and efficient production process.Analyse PLC programs to resolve errors and determine root causes of Interbus or Profinet network errors, determine corrective actions to continue with the Production process and ensure uninterrupted Production run.Fault find, set up and program SEW drives by using the appropriate diagnostics software/tools such as Movitools, Motion Studio to ensure uninterrupted Production run.Modify, update and improve diagnostic software on HMI to identify the faulty equipment to facilitate speedy resolution to Production stoppages.Analyse and investigate severe or reoccurring Production stoppages to determine the real root cause of the stoppage and determine the appropriate preventative action and counter measure to ensure that the reoccurring of the fault are eliminated and/or prevented.Contact equipment suppliers and technology experts within the company to enquire regarding solutions to complex equipment problems and failures to ensure pending or reoccurring faults are eliminated or prevented.Document Production stoppages, severe breakdowns, problem sheet, Knowledge Management System, TPM Sheets and PM schedules to ensure all maintenance activities are documented, distributed and knowledge is retained, made available and utilized to prevent future stoppages or breakdowns.Conduct root cause analysis of all breakdowns immediately after completing the breakdown, by analyzing the situation, causes, countermeasures and actions, ensuring that all is recorded and reported on required control sheets and documents.Ensure that the robot Safety circuit is in good working order and that all the required condition that meets the safety standards is installed.Download robot and PLC program backups to ensure quick recovery of the facilities in the event of a loss of data.
Education and Experience:
A National Nated Diploma/ National Diploma/ B Tech/B Eng./ B Sc. Degree in Electrical Engineering/ Mechatronics.At least 5 years in vehicle manufacturing maintenance and/or technical environment.
Skills, Attributes & Other requirements:
Siemens PLC and robot training would be a distinct advantage.Able to read E-Plan Electrical and Pneumatic drawingsHa...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zNjA3NTg1MjkwP3NvdXJjZT1ndW10cmVl&jid=1427992&xid=3607585290
2d
1
Job Description and Responsibilities:Design and install new plant concepts by following engineering principles, creating 3D and 2D CAD models, raising enquiry requests, conducting site meetings and selecting preferred suppliers.Running, monitoring and reporting on installation commissioning and report final sign-off to Management.Carry out maintenance on existing plant and equipment by following a preventative maintenance system.Procure the required components and equipment from external suppliers in accordance with the standard company purchasing system.Analyse failed plant and equipment for reasons for failure, and recommend and implement new processes and procedures in order to prevent such failures from reoccurring.Provide input into Financial Planning Rounds for CAPEX expenditure.Comply with and implement the statutory legal, safety and environmental requirements as applicable to the engineering test facility.Review power and water usage of the facility, and provide input into methods, processes and procedures to reduce water and energy consumption.Implement and co-ordinate the annual IS09001 calibration and certification activities for the engineering test facility.Keep the faculties up to current company Group standards.Maintain a detailed record of the facility by means of drawing records, CAD models and equipment documentation.Train fellow engineers in the use and operation of the engineering test facility.Education and Experience:Have a minimum of Bachelor of Science Degree in Mechanical Engineering.At least 5 years’ experience in the development and maintenance of facilities, control systems and equipment.A minimum of 3 years as a Senior Engineer performing design and Test engineering functions.
Skills, Attributes & Other requirements:In-depth knowledge of general mechanical engineering concepts with specific focus on Heating, Ventilation and Air-conditioning systems, mechanical equipment design and fabrication, heat transfer, instrumentation systems, software control and electrical power systems.
Insight and knowledge into technical engineering concepts.Specialized computer literacy with specific reference to 3D-CAD competence.Excellent report writing and presentation ability.Human relations (negotiation and patience).Innovation when faced with resource limitations.Knowledge of corporate procurement and Capex approval systems.Ability to solve complex mechanical engineering problems.Ability to plan and execute projects.Ability to identify risks, analyse them and setup planning to minimize risk.Ability to monitor, follow-up the project progress, to identify major project issues, and to escalate when necessary
Please forward CV and ALL supporting docum...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODQyODM0ODg1P3NvdXJjZT1ndW10cmVl&jid=1294690&xid=3842834885
2d
1
SavedSave
Key Performance Indicators• Care and maintenance to all plant equipment• Liaise and communicate to planning, maintenance, production on machine condition and availability• Ensure all electrical equipment and machinery are legally and correctly installed serviced and maintained.• Ensure safety checks are completed as allocated• Advice and inform production on equipment status prior to shutting down or leaving the factory.• Assist and train learners and apprentices in the area of expertise.
Minimum Requirements• N2 Trade Certificate• Qualified Electrician with PLC Knowledge • 3 to 5 years experience with factory exposure• Trade Test and Wiremans License• Shift Electrician
Please forward CV and ALL supporting documentation to, caree-lee@profilepersonnel.co.za. Should you not hear from Profile Personnel within 14 days please consider your application unsuccessful for the vacancy. Please note all applications will automatically be added to our database for future vacancies.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNjI2NDA5NDkyP3NvdXJjZT1ndW10cmVl&jid=1371232&xid=1626409492
2d
1
SavedSave
Injection Mould Setter required for a reputable automotive manufacturing company based in Gqeberha, Eastern Cape
Requirements :
Technical tertiary training and/or experienceMinimum 2 years Injection Moulding machine setting experienceBe physically fit and willing to work shifts and/or overtimeElectrical, Mechanical, Hydraulic background beneficialGrade 12 with maths and science and/or equivalent
Key Performance areas :
Machine start-up, monitoring and continuous optimizationTool changesEnsure mould safetyOEE settings and input/optimizationWeekend shutdownMaintain exceptional housekeeping standardsKnowledge and adherence to H&S procedures and regulations
Should you wish to apply please email your CV through to Kerry O’Hagan at Kerry@profilepersonnel.co.za
Only shortlisted candidates will be contacted. Should you not receive a response within 14 days please consider your application unsuccessful. We will keep your CV on our database for any other relevant roles that may arise.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNDU1NjE1MzI2P3NvdXJjZT1ndW10cmVl&jid=1615986&xid=2455615326
2d
1
SavedSave
An exciting position has become available for in the Durban area for an External Sales Consultant - Banking, must be comfortable to work on a Mobile Bus.
To promote and sell the Bank’s product bouquet to clients through sales activities in a responsible manner.
Responsible for sourcing and developing new contacts/prospects and sales leads through the Bank’s internal leads campaigns and your own referrals.
Sales Focus- Achieve customer growth, revenue and collections targets as defined by the bank
Marketing focus
Risk and Compliance focus
Customer service
Training and development
Operational activities - Responsible for ensuring compliance with all security and safety procedures within the branch including opening and closing procedures, camera surveillance where appropriate. Branch security, robbery, fire drill procedures and health and safety procedures and SOP’s
Grade 12 or equivalentNQF level 6 (FSB Recognized)RE5
Manual drivers license – must be comfortable to drive manual VITO BUS.Matric (must have FSCA aligned NQF6 with RE5 for career progression)Must speak Zulu and/or surrounding KZN languagesSales experience
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yOTc4MzIwNjAyP3NvdXJjZT1ndW10cmVl&jid=1012510&xid=2978320602
2d
1
SavedSave
Well established dealership looking for a TRAINEE Sales Manager to join their team in EASTERN Cape
Duties
Stock Receiving & dispatchMatching up delivery notes with orders/invoicesPacking stock dispatches timeouslyMaking sure that stock in the warehouse is properly packed & markedMaking sure that stock on display is kept clean and presentableMaintain excellent housekeeping & safety standardsControl stock take preparations and attending stock takeControl stock out bookControl marking and stocking customer goods kept in storeControl marking and paper trial for RFC/Claims(must be willing to work at either of our stores (PE and Walmer)
Requirements
Grade 12Certificate/Diploma in Stock Management would be an advantageExperience in Stock Management
Please send cv to madeleine@firstdegreerecruitment.co.za
https://www.ditto.jobs/job/gumtree/3216928741?source=gumtree
2d
1
SavedSave
Location
Port Elizabeth
Reports1 to 5 staffDepartmentOperationsPurpose summaryTo ensure effective coordination of operational processes in order to deliver service as contractually agreed with customers.Job descriptionProcess Management - StorageEnsures operational throughput as per SLA agreement specific to box storage.Evaluates operational workflows and procedures to improve job processes on an ongoing basis.Ensures fast and effective retrieval of documents for delivery to clients as required.Ensures accurate and timeous location of files and boxes.Ensures optimisation of resources with respect to current workloads.Process Management - DistributionEnsures maintenance and optimal usage of fleet vehicles, and recommends additions or replacement of vehicles.Monitors and ensures that all vehicles conform to corporate identity guidelines.Manages and ensures fast and effective collection and delivery of clients’ documents and records.Ensures strict adherence to the corporate dress code.Process Management - VaultEnsures fast and effective rotational collection and delivery of required business back-ups to clients.Ensures the accurate capturing of client information received onto the system.Ensures the accurate retrieval of computer media for delivery to clients on a daily basis.
Ensures safe and timeous delivery of computer media to clients according to schedule.Ensures optimisation of routing to maximise vehicle capacity utilisation.Ensures that all ad hoc client requests are fulfilled in the most effective manner.Manages and ensures effective and efficient maintenance of Vault operational processes.Reports operational statistics and client related exceptions to the General Manager on a daily, weekly and monthly basis.Ensures that all client complaints and issues are resolved.Process Management - GeneralReports on operational productivity to the General Manager on a daily, weekly and monthly basis.Ensures that areas under supervision comply with the OSH Act and housekeeping guidelines.People ManagementEnsures that staff is trained, skilled and that their expertise is optimally applied.Ensures that the working environment contributes to improve staff morale and increase productivity.Cost ManagementProvides input into the compilation of the regional budget.Optimises resources to control and reduce costs.Inspects facility and equipment to determine need and extent of service, equipment requiredand type and number of operational staff required.Responsible for managing stock and stock controlsControl and Maintains facilities i.e. equipment, grounds, safety and security checks and procedures and policies....
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMzg0MTE5ODQ3P3NvdXJjZT1ndW10cmVl&jid=1568130&xid=2384119847
2d
1
Plant / Manufacturing Electrician, Mthatha (Eastern Cape), Rneg + Benefits + Company Housing
GRADE 12ELECTRICIAN TRADE TEST5+ YEARS MANUFACTURING EXP (Advantage Plant/ Forestry)(no MINE ELECTRICIANS!!!)Maintenance on all electrical equipmentFault finding and repair on all electrical equipment.Perform changes to base documentation i.e. manuals, P&ID and all instrumentation drawings.Identify and informing Team Leader of any health or safety hazards in the plant.Perform after-hour standby duty on the plantComputer literate.Basic PLC and SCADA knowledge (Allen Bradley and Siemens).Basic Frequency drive knowledge (Allen Bradley and SEW).Good understanding of processes.Commitment to company vision, values and core philosophies.Dynamic and innovative.Good communication skillsAbility to work within a team environment
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNjExNDA1NDE2P3NvdXJjZT1ndW10cmVl&jid=325157&xid=1611405416
2d
1
EE Manufacturing Millwright (Siemens & Allen Bradley PLC), Gqeberha - Port Elizabeth , R35 - 40k + Penson + Medical + Housing All + 13th Cheque
Trade Test - MillwrightA minimum of 3 years working experience in a Manufacturing Industry (Production environment).PLC fault finding ( Siemens & Allen Bradley)Working experience in 220V and 380V maintenance / electrical panels and control circuits.Competent to work on both HT and LT electricalExcellent communication skills with all levels.Interface professionally with all levels of employees.Computer Literate in MS Office andStrong interpersonal skills, objective and analytical
· To manage by planning, organising, controlling, within company policy to achieve maximum production output.
To maintain the electrical / electronic equipment on the premises in such a way as to ensure the minimum downtime
DUTIES
Oversee and motivate the workforce to achieve the best utilisation and efficiency of the plant and materials and thereby produce only products of the best quality.To ensure proper raw material control and monitoring and thereby achieve the most economical usage throughout the production process.Ensure that machines are in working order and preventative maintenance is done to avoid loss of time.Effective Electrical and Mechanical Maintenance on all sections and divisions.Maintain all electrical / electronic equipment to the highest working and safety standards.
Responsible for the maintenance of the curing equipment.Ensure the minimum downtime as a result of electrical breakdowns.Fault finding.Ensure production efficiency and maintain high quality standards.Control maintenance stores and related purchasing.Responsible for the ordering and receipting of raw materials, electrical spares and equipment.Monitor machine settings to avoid raw material losses.Responsible for the provision of accurate daily production statistics.Ensure that the planned maintenance system is maintained.Responsible for the accuracy of daily labour hours and ensure that the company abides by the requirements of the Department of Manpower.Ensure that all the requirements of the OHS Act are conformedAbide by Company Safety, Personnel and Operational Policies as amended from time to time.
Abide by Company Safety, Personnel and Operational policies...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMzcyODI0MzM/c291cmNlPWd1bXRyZWU=&jid=1664920&xid=237282433
2d
1
SavedSave
Duties and Responsibilities:
Lead and manage the maintenance department, ensuring smooth and efficient operationsDevelop and implement preventative maintenance and continuous improvement programs to minimize downtime and optimize equipment performanceMaintain OEE on all equipment in line with company specificationsCoordinate and supervise maintenance activities, including routine inspections, repairs, and equipment overhaulsProvide technical expertise and guidance to the maintenance team, troubleshooting complex issues as they ariseMonitor and maintain inventory of spare parts, ensuring availability for timely repairs and replacementsManagement of contractorsEnsure that the maintenance function operates in accordance with the relevant legislation, including but not limited to OHS Act and By-Laws. Ensure adherence with all health, safety and environmental policies and procedures to ensure the safety and wellbeing of staff and visitorsKeep maintenance logs and report on daily activitiesInspect building structures to determine the need for repairs or renovations. Oversee building projects and renovationsReview utility consumption and strive to minimize costsEnsuring that facilities meet government regulations, health and security standards and energy efficiency requirements.Identification of training needs for subordinates to aid achieving objectives
Qualification and Experience:
A Matric CertificateDiploma/Degree in Mechanical/Electrical Engineering or equivalent10+ years working experience in plant maintenance, preferably in the Automotive industry, with 3 years in a managerial position
Knowledge, Skills and Abilities:
Experience in planning maintenance operationsStrong knowledge of engineering concepts, including electrical, hydraulics and mechanical systemsStrong knowledge of tooling, equipment, engineering specifications, and cost reduction methods in automotive applications·Working knowledge of the IATF 16949, ISO45001 and ISO14001 standardsSound knowledge of the OHS ActProblem-solving and analytical SkillsPlanning and Organisational SkillsKnowledge of facilities managementProficiency in MS Office applicationsExcellent verbal and written communications skillsKnowledge of ERP systemsAttention to detailfAbility to handle multiple tasks in a fast-paced, team-oriented and multi-cultural environmentGood interpersonal skillsGood presentation skills
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS85NDYxNTA5MDU/c291cmNlPWd1bXRyZWU=&jid=1677164&xid=946150905
2d
1
SavedSave
Overview:
The primary goal of this position is to lead 3 different diary-product production teams to achieve production targets, quality outputs, and KPI’s, while maintaining a safe and efficient operation and producing products to the required quality standards. Manage the process flow of production from raw to finished packed product.
Minimum Requirements:
MatricPost-matric certificate/diploma/degree (essential)2+ years experience as a Team Leader / Production Coordinator in dairy processing (advantageous)5+ years experience in production environment in FMCG dairy industry (advantageous)Efficient in MS Office, with Intermediate Excel
Responsibilities:
Quality:
Drive housekeeping, efficiency, cost control, quality, waste and safety standards in the PlantUnderstand and follow lean manufacturing, FSSC, GMP, various audit requirements and world class manufacturing practices.Daily Communication with
H&S Officer for Safety issuesQuality Control for Quality issuesMaintenance for Maintenance issuesStores for Raw Material requirements
Responsible for ensuring compliance to Quality policies and procedures
Health and Safety
Enforce adherence to safety regulations in the plant to achieve safe working environment.Report and highlight potential safety-related issues to relevant parties.Ensure compliance with Health, Safety and Environment measures (safety guards, PPE, waste disposal etc.).Assist in accidents and incidents investigation
Manage Operational Efficiency
Set and/or drive OEE daily and monthly targets and ensure all lines are running optimally.Address inefficiencies and find appropriate solutions.Ensure that all job cards and defects needing attention are recorded and reported timeously.Ensure traceability practices are recorded and carried out daily.
People Performance and Development
Ensure disciplinary issues relating to performance, quality, staff attendance, timekeeping, overtime, and absenteeism are managed.Communicate clear Objectives for to all teams.Ensure training given to employees as required.
Continuous Improvement
Identifying opportunitie...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zNDQyMTIxNTY/c291cmNlPWd1bXRyZWU=&jid=1743075&xid=344212156
2d
Save this search and get notified
when new items are posted!
