Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for for job in Jobs in Other
1
Our client within the manufacturing industry is seeking an experienced Fitter and Turner to join their team in the Northern Suburbs.
Requirements:
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Responsibilities:
Breakdowns:
Responsible to attend all breakdowns on machines.
Monitor, report, and amend all stock and non / stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of all service history information.
Preventative Maintenance
:Responsible for all Chain CU Jigs, R&D Testing & Zinc Plating.
Responsible to utilize breakdown service & inspection data to motivate improvements on all above-mentioned production lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all responsible production lines.
Responsible for continuous improvement on maintenance procedures and checklists.
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all relevant production lines.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all responsible machinery and components.
Liaise with Projects Engineer on commissioning of all new responsible machinery and components.
Responsible for innovation and improvement of all responsible machinery and components
Responsible to interact with R&D, Design, and contractors on testing phases of all responsible machinery and components.
To apply, please forward your CV to hannah@personastaff.co.za.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004804/H&source=gumtree
16min
1
SavedSave
Our client, based in the Northern Suburbs in the manufacturing industry is seeking a qualified and experienced Boilermaker on a 6-month contract position.
Requirements:
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Responsibilities:
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc. installed. Test the safety of the operation/function. Identify and address snags.
To apply, please forward your CV to hannah@personastaff.co.za.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hour
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004803/H&source=gumtree
16min
1
SavedSave
Our client, in the manufacturing industry based in the Northern Suburbs is seeking a suitably qualified and experienced Fitter and Turner.
Requirements:
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
A valid driver’s license with own reliable transport.
Responsibilities:
Breakdowns:
Responsible to attend all breakdowns on all machines.
Monitor, report, and amend all stock and non / stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of all Induction ovens & temper furnaces service history information.
Liaise with Induction Coil Specialist and Induction Generator Specialist on any breakdowns regarding all Induction ovens & temper furnaces and commissioning thereof.
Preventative Maintenance
:Responsible for all Induction ovens & temper furnaces standardization per production unit.
Responsible to utilize breakdown service & inspection data to motivate improvements on all Induction ovens & temper furnaces lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all Induction ovens & temper furnaces
Responsible for continuous improvement on maintenance procedures and checklists
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all Induction ovens & temper furnaces.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all Induction ovens & temper furnaces.
Liaise with Projects Engineer on commissioning of all new Induction ovens & temper furnaces.
Responsible for innovation and improvement of all Induction ovens & temper furnaces
Responsible to interact with R&D, Design, and contractors on testing phases of all Induction ovens & temper furnaces machines.
To apply, please forward your CV to hannah@personastaff.co.za.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004802/H&source=gumtree
16min
1
Our client, an agricultural steel processing company, is seeking an experienced International Marketing Specialist to drive the launch and promotion of their new product lines in global markets.
Requirements:
Bachelor’s degree in marketing, international business, or a related field.
10+ years of experience in international marketing (agricultural or manufacturing industry beneficial).
Proven track record of successfully launching new products in global markets.
Exceptional written and verbal communication skills, including the ability to present complex information in a clear and compelling manner.
Proficiency in digital marketing tools and analytics to measure and optimize campaign performance.
Strong cross-cultural awareness and the ability to adapt marketing strategies to local market needs.
Fluency in English and at least one other language relevant to target markets.
Willingness to travel internationally to support marketing initiatives.
Understanding of the agricultural and steel processing industry landscape.
Responsibilities:
Conduct thorough market research to identify potential target markets, customer needs, and competitive landscape for new product lines.
Develop and implement international marketing plans, including go-to-market strategies, pricing, distribution, and promotional activities.
Create localized and culturally relevant marketing content (e.g., website, product collateral, social media) for diverse global audiences.
Manage and optimize digital marketing campaigns across various online channels to generate brand awareness and leads in international markets.
Coordinate with the sales team to align marketing efforts and support lead generation, lead nurturing, and customer engagement activities.
Analyse market data, monitor competitor activity, and track key performance indicators to continuously improve marketing strategies.
Serve as the subject matter expert on new product capabilities, features, and benefits to effectively communicate value proposition to international customers.
Attend and represent the company at relevant industry events, trade shows, and conferences in target markets.
Collaborate cross-functionally
with product development, operations, and customer service teams to ensure seamless new product launches.
To apply, please forward your CV to hannah@personastaff.co.za.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request
SECTOR: Engineering & Technical; Marketing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004801/H&source=gumtree
16min
1
An experienced International Marketing Specialist
is needed for our client, an agricultural steel processing company
, to spearhead the introduction and advertising of their new product lines in international markets.As part of this position, you will be in charge of creating and carrying out extensive marketing plans to successfully present their cutting-edge products to clients throughout the world.
Qualifications & Requirements:
Bachelors degree in marketing, International Business, or a related field.
10+ years of experience in international marketing (agricultural or manufacturing industry beneficial).
Proven track record of successfully launching new products in global markets.
Exceptional written and verbal communication skills, including the ability to present complex information in a clear and compelling manner.
Proficiency in digital marketing tools and analytics to measure and optimize campaign performance.
Strong cross-cultural awareness and the ability to adapt marketing strategies to local market needs.
Fluency in English and at least one other language relevant to target markets.
Willingness to travel internationally to support marketing initiatives.
Understanding of the agricultural and steel processing industry landscape.
Responsibilities:
Conduct thorough market research to identify potential target markets, customer needs, and competitive landscape for new product lines.
Develop and implement international marketing plans, including go-to-market strategies, pricing, distribution, and promotional activities.
Create localized and culturally relevant marketing content (e.g., website, product collateral, social media) for diverse global audiences.
Manage and optimize digital marketing campaigns across various online channels to generate brand awareness and leads in international markets.
Coordinate with the sales team to align marketing efforts and support lead generation, lead nurturing, and customer engagement activities.
Analyze market data, monitor competitor activity, and track key performance indicators to continuously improve marketing strategies.
Serve as the subject matter expert on new product capabilities, features, and benefits to effectively communicate value proposition to international customers.
Attend and represent the company at relevant industry events, trade shows, and conferences in target markets.
Collaborate cross-functionally
with product development, operations, and customer service teams to ensure seamless new product launches.
Please forward your CV to liza-nelle@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacanci
SECTOR: Engineering & Technical; Marketing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004797/LN&source=gumtree
16min
1
SavedSave
Our client in the agricultural sector is seeking a Creditors Clerk to join their team. This role will report directly to the Financial Manager.
Responsibilities:
Receiving and capturing of invoices from receiving.
Maintain the goods received and the invoice record book.
Prepare and send expected payment lists weekly.
Ensure that all invoices are processed for weekly payments.
Printing emails within the deadline.
Making sure that all the necessary documents and approvals are attached for payment.
Checking of banking details.
Checking due dates before submitting of payments.
Ensure that all invoices are expensed by the end of the month with the correct supporting documents.
Prepare month end creditors file for payment.
Capturing invoices/credits.
Reconciliation of the account and assist with queries.
Prepare invoices for global payments as per budget.
Printing, scanning and emailing.
Complete credit applications for new supplier accounts and get the necessary authorization.
Creations of new vendors and completion of forms.
Complete telephonic confirmations.
Ensure all documents are received.
Create SAP vendor and send for approval.
Ensuring that filing is complete and maintain the filing system.
Liaise with head office.
Requirements:
Matric certificate.
3+ years in a similar role.
Must have good communication skills in English and Afrikaans.
Drivers license.
SAP knowledge.
Problem solving and organizational skills.
To apply, please send your CV with your salary expectations to natasha@personastaff.co.zaPlease note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. By applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding
SECTOR: Finance
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004805/N&source=gumtree
24min
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to craig@personastaff.co.za
and indicate your salary expec
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004794/CS&source=gumtree
24min
1
Fitter & Turner (R&D Testing Artisan)
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Responsibilities
Attend to all breakdowns promptly across various production machines.
Monitor and manage stock levels of critical spare parts in the Stores & Maintenance department.
Provide detailed reports to Maintenance & Production regarding repair progress and fault diagnosis.
Record downtime duration on maintenance job cards for analysis.
Maintain comprehensive service history records for all equipment.
Conduct preventative maintenance on Chain CU Jigs, R&D Testing, and Zinc Plating lines.
Utilize breakdown and inspection data to drive improvements across production lines.
Investigate and report unforeseen limitations or stoppages during planned services.
Perform regular weekly, monthly, and yearly services on designated production lines.
Continuously improve maintenance procedures and checklists.
Collaborate with the maintenance department to implement changes and improvements following breakdown investigations.
Monitor and report on the condition of machine components.
Provide feedback to the Design department for improvements and address issues on relevant production lines.
Ensure availability and functionality of necessary tools and equipment.
Report any deviations from original designs and collaborate with Projects Engineer for commissioning of new machinery.
Drive innovation and improvement in machinery and components.
Collaborate with R&D, Design, and contractors during testing phases.
Please forward your CV to craig@personastaff.co.za
and indicate your salary expectations.Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004795/CS&source=gumtree
24min
1
SavedSave
Internationally established Manufacturing organization based in the Northern Suburbs of Cape Town has an opportunity available for a R&D Mechanical Engineer.
Minimum Requirements and qualifiers:
Matric / Grade 12.
BEng Degree in Mechanical Engineering from a reputable University.
Minimum of 5 years’ similar experience as a R&D Mechanical Engineer.
Excellent communication skills with the ability to perform under pressure.
Valid driver’s license with own transport.
Must have exposure to the following:
Axis
Pumps
Motors
Bearings
Heat treatment
Types of steel
Machine design
Process Design
Been involved in the test phase.
Been involved in the manufacturing phase.
Key areas of performance:
Product Support & Development
Research & Development
R&D:
Administration
Procurement
Client Liaison
Cost Control
To apply, please send your CV and salary expectations to craig@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff (PTY) LTd. is POPIA (Protection of Personal Information Act, 2013) compliant
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004791/CS&source=gumtree
24min
1
SavedSave
Our client, an international manufacturing company based in the Northern Suburbs of Cape Town has an opportunity available for a R&D Mechanical Engineer.
Requirements:
Matric / Grade 12.
BEng Degree in Mechanical Engineering from a reputable University.
Minimum of 5 years’ similar experience as a R&D Mechanical Engineer.
Excellent communication skills with the ability to perform under pressure.
Valid driver’s license with own transport.
Must have exposure to the following:
Axis
Pumps
Motors
Bearings
Heat treatment
Types of steel
Machine design
Process Design
Been involved in the test phase.
Been involved in the manufacturing phase.
Responsibilities:
Product Support & Development
Research & Development
R&D:
Administration
Procurement
Client Liaison
Cost Control
To apply, please send your CV and salary expectations to hannah@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004800/H&source=gumtree
24min
1
SavedSave
A successful diesel depot based in the Northern Suburbs is searching for a detail-oriented and motivated Junior Accountant to support their finance department in managing day-to-day accounting tasks.
Desired Experience & Qualification
Diploma in Accounting/HR or relevant degree
5 + years payroll processing & accounting experience essential
Legislation knowledge of the Labour relations, Basic Conditions of Employment Act, SARS – PAYE etc.
Sage, Pastel & Pastel Payroll
Excellent verbal and written communication
Intermediate level of experience in Microsoft Office, specifically Excel
Duties & Responsibilities
Ad hoc duties
Monthly processing up to trial balance
Processing of bank reconciliation
Preparation and submission VAT201 return
Adhering to agreed deadlines Assistance provided to Financial Manager as needed
Support auditors with year-end audits
Maintains the fixed asset register
Process bi-weekly and monthly salaries and salary related transactions
Maintaining employee records (contracts)
Provide an effective and efficient salary processing administrative service
Processing payable hours, overtime, commissions, bonuses, Tax, PAYE, UIF, EMP 201, EMP501
Continuously review systems and processes to improve efficiency and cost savings
Staying informed and keeping abreast of company policies, Tax legislation and system changes that impact on remuneration and payroll functions
Ensuring benefits are captured and processed correctly
Provide a cost-effective payroll administration service compliant with corporate governance and statutory requirements
Submission of NBCRFI, MIBCO, Old Mutual, Workmens Compensation, EE etc.
Facilitates Injury on Duty and Workmens Comp processes with the Local Department of Labour
Dealing with all wage/salary queries
To apply, please send your CV with your salary expectations to cindy@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
SECTOR: Finance
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004799/CVE&source=gumtree
24min
1
Our client, an agricultural steel processing company, is seeking an experienced International Marketing Specialist to drive the launch and promotion of their new product lines in global markets.
In this role, you will be responsible for developing and executing comprehensive marketing strategies to effectively introduce their innovative products to international customers.
Qualifications & Requirements:
Bachelor’s degree in marketing, International Business, or a related field.
10+ years of experience in international marketing (agricultural or manufacturing industry beneficial).
Proven track record of successfully launching new products in global markets.
Exceptional written and verbal communication skills, including the ability to present complex information in a clear and compelling manner.
Proficiency in digital marketing tools and analytics to measure and optimize campaign performance.
Strong cross-cultural awareness and the ability to adapt marketing strategies to local market needs.
Fluency in English and at least one other language relevant to target markets.
Willingness to travel internationally to support marketing initiatives.
Understanding of the agricultural and steel processing industry landscape.
Responsibilities:
Conduct thorough market research to identify potential target markets, customer needs, and competitive landscape for new product lines.
Develop and implement international marketing plans, including go-to-market strategies, pricing, distribution, and promotional activities.
Create localized and culturally relevant marketing content (e.g., website, product collateral, social media) for diverse global audiences.
Manage and optimize digital marketing campaigns across various online channels to generate brand awareness and leads in international markets.
Coordinate with the sales team to align marketing efforts and support lead generation, lead nurturing, and customer engagement activities.
Analyse market data, monitor competitor activity, and track key performance indicators to continuously improve marketing strategies.
Serve as the subject matter expert on new product capabilities, features, and benefits to effectively communicate value proposition to international customers.
Attend and represent the company at relevant industry events, trade shows, and conferences in target markets.
Collaborate cross-functionally
with product development, operations, and customer service teams to ensure seamless new product launches.
Please forward your CV to craig@personastaff.co.za
and indicate your salary expectations.Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant.
SECTOR: Engineering & Technical; Marketing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004792/CS&source=gumtree
25min
1
SavedSave
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner in their maintenance division.
Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
A valid driver’s license with own reliable transport.
Responsibilities
Attend to breakdowns promptly across all machines, ensuring minimal downtime.
Monitor and manage stock levels of critical spare parts in the Stores & Maintenance department.
Provide regular reports to Maintenance & Production on repair progress and fault diagnosis.
Record downtime duration on maintenance job cards for analysis.
Maintain service history records for all Induction ovens & temper furnaces.
Collaborate with specialists for breakdowns and commissioning of equipment.
Standardize and improve maintenance procedures for production units.
Utilize breakdown data for continuous improvement of equipment performance.
Conduct weekly, monthly, and yearly services on equipment.
Enhance maintenance procedures and checklists through continuous improvement.
Provide feedback to the Design department for equipment improvements.
Ensure availability and functionality of necessary tools and equipment.
Report any deviations from original designs and liaise with Projects Engineer for commissioning of new equipment.
Drive innovation and improvement in equipment performance.
Collaborate with R&D, Design, and contractors during testing phases
Please forward your CV to craig@personastaff.co.za
and indicate your salary expectations.Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004793/CS&source=gumtree
25min
1
SavedSave
Are you a vibrant individual with a passion for providing exceptional customer service? Our client, a prominent player in the property industry
based in the Northern Suburbs
, is seeking a dynamic and enthusiastic Receptionist
to become an integral part of their team
Requirements:
Matric
Minimum 1 year working experience
Computer literate
Fluent in both Afrikaans and English
Excellent communication and interpersonal skills
Strong organizational skills and attention to detail
Ability to multitask and prioritize tasks effectively
Professional demeanor and appearance
Willingness to learn and adapt in a fast-paced environment
To apply, please send your CV with your salary expectations to liza-nelle@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
SECTOR: Admin, Office & Support
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004798/LN&source=gumtree
25min
1
SavedSave
Senior Fitter & Turner (Maintenance)
An internationally established manufacturing company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner in their maintenance division.
Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible to attend all breakdowns on all machines.
Monitor, report, and amend all stock and non / or stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to the progress of repairs and diagnosis of faults.
Report on the duration of downtime on the maintenance job card.
Responsible for tracking and upkeep of all Induction ovens & temper furnaces service history information.
Liaise with Induction Coil Specialist and Induction Generator Specialist on any breakdowns regarding all Induction ovens & temper furnaces and commissioning thereof.
Preventative Maintenance
:Responsible for all Induction ovens & temper furnaces standardization per production unit.
Responsible to utilize breakdown service & inspection data to motivate improvements on all Induction ovens & temper furnace lines.
Responsible for reporting & investigating unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all Induction ovens & temper furnaces
Responsible for continuous improvement of maintenance procedures and checklists
Responsible for interacting with the maintenance department relating to any changes, and improvements following investigations on breakdowns, improvements on downtime etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to the Design department relating to improvements & issues on all Induction ovens & temper furnaces.
Responsible for ensuring all necessary tools & equipment are available and in working condition.
Responsible for reporting any deviations to original as-built drawings/designs on all Induction ovens & temper furnaces.
Liaise with the Projects Engineer on the commissioning of all new Induction ovens & temper furnaces.
Responsible for innovation and improvement of all Induction ovens & temper furnaces
Responsible for interacting with R&D, Design, and contractors on testing phases of all Induction ovens & temper furnaces machines.
Please forward your CV to liza-nelle@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004796/LN&source=gumtree
25min
1
SavedSave
Our client in the agricultural sector is seeking a Dispatch Coordinator to join their team.
Responsibilities:
Organise and communicate with the bulk and local outsource deliveries.
Communicate with customers regarding orders, late deliveries, and ETA’s.
Ensure that the documentation for transportation and deliveries are complete and filed.
Handling of customer queries.
Contact customers with the roadmap, directions and contact details.
Preparation of waybills for bulk and local outsource deliveries.
Assist customers with collections and deliveries.
Check the stock to assist the pickers and escalate any discrepancies to management.
Organise with customers for the transportation of returns and credits.
Support with the picking, packing and stock counts when required.
Take part in HSE activities, housekeeping, and reporting.
Requirements:
Matric certificate.
3+ years in a similar role.
Must have good communication skills in English and Afrikaans.
Valid forklift license and experience driving a forklift.
Drivers license.
Computer literate and proficient on ERP systems.
SAP experience.
Ability to work independently and within a team.
Problem solving and organizational skills.
To apply, please send your CV with your salary expectations to hannah@personastaff.co.zaPlease note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. By applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request our POPI Act Policy.
SECTOR: Agriculture
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004554/H&source=gumtree
39min
1
Our client, who is located in the Northern suburbs
, is searching for a driven and well-organized individual to join them as a Junior Property Coordinator
.
Requirements:
Matric.
Tertiary qualification would be beneficial.
Minimum 1 year working experience.
Computer literate.
Strong organizational skills and ability to multitask.
Fluent in both Afrikaans and English.
Excellent communication skills, both verbal and written.
Attention to detail and ability to maintain accurate records.
Willingness to learn and adapt to new processes and technologies.
Ability to work independently and collaboratively as part of a team.
To apply, please send your CV with your salary expectations to liza-nelle@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
SECTOR: Property
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004774/LN&source=gumtree
39min
1
SavedSave
Join Our Creative Architectural Team in Durbanville, Cape Town!Are you ready to step into a vibrant world where architecture blends seamlessly with art and science? Were on the lookout for a talented Office Administrator to become an integral part of our dynamic architectural practice. At our firm, we dont just design buildings; we craft experiences. From the moment you step into our office, youll feel the energy of creativity and innovation buzzing in the air. Located in the heart of Durbanville, Cape Town, South Africa, our team is dedicated to creating spaces that are not only functional and practical but also exquisitely beautiful.
What Were Looking For:
Matric qualification is essential, but if youve got a tertiary qualification, thats even better!
Previous experience in office administration or a similar role is preferred.
Strong organizational skills and a keen eye for detail are a must.
Proficiency in typing and record-keeping will be key to your success.
Excellent communication skills, both verbal and written, are essential.
You should be able to juggle multiple tasks and prioritize effectively.
A proactive and self-motivated attitude with a willingness to learn and adapt is highly valued.
Proficiency in MS Office suite and other relevant software (Teams) is required.
You should be able to work effectively both independently and as part of a team.
Your Responsibilities Will Include:
Performing general office administration tasks, such as filing, sorting client files, and maintaining up-to-date records.
Typing minutes and notes during meetings and project discussions.
Coordinating services to ensure smooth operations within the firm.
Assisting with tender documentation and administration processes.
Liaising with clients, consultants, and suppliers regarding project details and information requirements.
Attending site visits and technical meetings as necessary.
Communicating effectively, both verbally and in written reports, on dedicated projects.
Completing and submitting Local Authority Submissions for approval of building plans.
Acting as a problem solver and contributing positively to team collaboration and problem-solving efforts.
Serving as the secretary and Personal Assistant for the director of the firm.
If youre ready to embark on a rewarding journey where creativity knows no bounds, then we want to hear from you! Join our passionate team and be part of something extraordinary. Apply now and let your talent shine in the world of architecture! Email your CV to craig@personastaff.co.za
Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant.
SECTOR: Admin, Office & Support
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004585/CS&source=gumtree
39min
1
SavedSave
SURGO (PTY) Ltd. has partnered with a prominent retail group headquartered in the Western Cape. Since their establishment in 2012, they have provided exceptional services in the realm of Fast-Moving Consumer Goods (FMCG). Operating in the emerging markets, they consider their customers as part of their extended family. Their commitment is grounded in the principle of delivering on their promises we believe in doing exactly what we say were going to do. Join them in their journey to create meaningful experiences for both their team members and valued customers.
Our client is recruiting for an experienced Financial Accountant to join their team based in Blackheath, Cape Town.
Job Purpose:
The main function of this position is performing the financial accounting tasks which are required to produce the monthly management accounts. In this regard the financial accountant will have the support of a junior accountant, creditors clerks, and store based administration managers. Reporting to the Group Financial Manager.
Responsibilities:
• Processing of monthly journals (pay-roll, sales / cost of sales, depreciation, revenue and expense and general accruals, etc.) to finalise the monthly accounts
• Reconciliation of General Ledger clearing accounts, other General Ledger accounts, and resolution of outstandings to ensure completeness and accuracy
• Produce the management accounts and perform the month end close process
• Maintenance of fixed asset registers (including accounting for additions and disposals)
• Periodic insurance reviews and update of insurance values through direct communication with the companies insurance brokers
• Submission of statutory returns to SARS, and any further detailed information/reconciliations related to those submissions that may be requested.
• Produce the annual financial statements and prepare the necessary supporting working papers that may be required for the annual financial audits
• Attending to general financial administrative matters which includes communication with our service providers, (various Banks, Lessors, the Companys Distribution Centre, and External Auditors) Skills and Qualification required:
• Bcom Accounting Honours with 3 to 4 years post qualification experience
• Alternatively a CASA with 2 years post article experience
• Grade 12 Matric Certification
• 3 Years Retail Experience (advantageous)
• Proficiency in Microsoft Excel
• Quick learner and efficient
• An approach which focuses on getting the work done correctly
• An ability to independently complete assigned tasks within identified time frames
Salary:R35K to R50K depending on experience and skill set
Working Hours: 45 hours per week, Monday to Friday with every second Saturday half day (also willing to participate in stock takes)
Should you wish to apply for the position, please apply directly via this job board, please ensure that you quote reference number 202658 subject heading or email body.
Surgo (...Job Reference #: 202658
1d
SavedSave
RETAIL SALES CONSULTANT/R8 000 SL NEG/PENSION/+INCENTIVES**5.5 DAY WEEK** MAITLAND*** MY CLIENT NEEDS YOU *** if you have a flair for interior decor/fabric/similar and gained a min 3-5 internal sales experience within retail, have a snr certificate and are credit/criminal clear and enjoy working with people, and have excellent communication skills (English/other) and able to work in a fast paced creative environment DONT DELAY EMAIL TODAY TOmargot@newerarecruiting.co.za or call 065 808 3063 office hrs only
11h
Save this search and get notified
when new items are posted!
