Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Suggested
Results for flooring in Jobs in Northern Suburbs
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to craig@personastaff.co.za
and indicate your salary expec
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004794/CS&source=gumtree
17h
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to natasha@personastaff.co.za
and indicate your salary exp
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004788/N&source=gumtree
17h
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post-trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Ensure that all parts comply with the procurement register and data pack (Report any deviations). Check that all tools and equipment are available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to liza-nelle@personastaff.co.za
and indicate your s
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004789/LN&source=gumtree
17h
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements:
• Grade 12 / National Senior Certificate.
• Qualified Boilermaker Trade Test Certificate.
• Minimum of 1 -2 years’ post trade experience.
• A valid driver’s license with own reliable transport.
Skills and Knowledge Required:
•Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
•Welding – Mig, Tig and Arc
•Drilling and/or slotting holes. Proper use of hand drill, Mag base drill, machining machine, etc.
•Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc. (Prep for next phase)
•Machining and Fitting - Planning: Check that all part complies with procurement register and data pack. (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
•Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
•Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
•Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
•Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
•Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc. installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
17h
1
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Salary: R120 - 150 p/hConsultant Name: Megan Ockhuis
17h
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za
and indicate your salary expec
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004764/MM&source=gumtree
18h
1
SavedSave
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Boilermaker with Fabrication Experience.
REQUIREMENTS:
Grade 12 / National Senior Certificate
Fitter and Turner Trade Test Certificate
Minimum of 2 years’ experience as a qualified Fitter and Turner in a manufacturing environment
Energetic, proactive and able to work under pressure
A valid driver’s license with own reliable transport
Skills and Knowledge Required
·Admin: Complete all Fabrication Request feedback paperwork. Complete MJR’s. Compile SOW and BOM for small FR. Complete all TSIS and H&S paperwork.
·Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
·Welding – Mig, Tig and Arc
·Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
·Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
·Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
·Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
·Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
. Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
·Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
·Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
18h
1
SavedSave
Our client, based in the Northern Suburbs in the manufacturing industry is seeking a qualified and experienced Boilermaker on a 6-month contract position.
Requirements:
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 yearsâ?? post trade experience.
A valid driverâ??s license with own reliable transport
Responsibilities:Â
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding â?? Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJRâ??s for parts require heat treatment or any process that canâ??t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJRâ??s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc. installed. Test the safety of the operation/function. Identify and address snags.
To apply, please forward your CV to hannah@personastaff.co.za.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your applicatio
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004803/H&source=gumtree
19h
SavedSave
RETAIL FLOOR SALES PERSON/R8100/PENSION/MAITLAND** SALES IS THE NAME OF THE GAME ** SHOW OFF AND ENJOY WORKING 5.5 DAY WEEK ** Established concern is expanding their sales force and now needs to retain the services of an individual who has had 3-4 yrs floor sales experience - perhaps in carpets/flooring/blinds/fabric/similar ??Must have a good energy level, excellent communication skills, basic computerskllls and able to open/close a sale, snr certificate and be credit/criminal clear.YES TO ALL THE ABOVE email today to margot@newerarecruiting.co.za orcall 065 808 3063 office hrs only
5d
SavedSave
Cleaner needed for post occupation cleaning. MUST BE ABLE TO WASH WALLS as well as be able to get oil out of wall paint. Wooden floors also need to be polished.
Empty 1 bedroom, 1 bathroom flat.
Loevenstein, Parow.
R350 for the day - PAYMENT WILL ONLY BE MADE IF CLEANED PROPERLY.
6d
Seeking skilled
joinery and flooring installer competent in installation of staircase, flooring, decking and
joinery.
Valid
drivers licence
Minimum 10
years experience in cabinetry, joinery, or flooringEmail CV to sales.timberprojectsquad@gmail.com with valid references.Do not send CV or make contact if you are not an installer of wooden flooring/Cabinetry/Joinery
5d
SavedSave
MAIN DUTIES AND RESPONSIBILITIES
Become fully conversant
with the point of sale and C.R.M. Computer software in your storeAssist customers on a
daily basis with their requirements including registrations of customer
details on the Bride & Co sideEnsure all orders are
processed, tracked and accounted for on a daily and weekly basisContinually communicate
with customers using tools made available to youEnsure all filing and
administration is up to date and filed correctlyEnsure all garments are
cleaned and steamed and quality controlled prior to final fittings and
collectionsEnsure all merchandise
in your designated area is cleaned, dresses to be steamed and kept clean
at all timesEnsure there are no
damaged merchandise and if any damages are noted, these need to be
reported to the Brand Manager and removed off the floor with the relevant
paperworkAssist with
merchandising of the store as well as general housekeepingAssist with ensuring all
stock rooms are tidy and organizedKeep all customers’
garments stored in the designated areas and ensure all are labeled and
stored correctlyFollow correct
procedures for restricted period garments and special request ordersAttend stock takes when
required whether during the week or weekends or overtimeAttend wedding shows or
trade exhibitions if/when required during the week or at weekends or
during overtimePlease note that your
duties may vary from time to time and that you shall be required to comply
with any reasonable request made of you during working hours.Your appointments
require flexibility as you may be transferred within branches from time to
time.
Training
If/when required by Management
you will attend training courses which may take place during working
hours, after working hours or on weekends.
General
· Attend stock takes when required whether
during the week or weekends or overtime
· You may be transferred to other stores
within the Company to assist with back logs of working, at Management’s
discretion. The transferred shops will be within the province where you live.
· To accept all other duties as specified by
your Superior. Please note that your duties may vary from time to time and that
you shall be required to comply with any reasonable request made of you during
working hours.
· You are expected to be on time each day and
to make every effort at all times to carry out your duties in a spirit of good
will, co-operation and enthusiasm.
Kindly email your CV to canalbride@brideandco.co.za by
17h00 on Friday 17th May 2024.
8d
2
SavedSave
Our team of experts are looking for passionate, energetic, and confident sales assistants to work in our Cape Gate Mall store, to drive positive energy and excitement around our brand and products. Our stores are situated both in the Southern and Northern Suburbs of Cape Town.Our Sales Assistants are Ambassadors for our brand and offer an amazing Customer experience. They exceed customer expectations by identifying and providing customers with the best possible solutions and world class service.Responsibilities:Ensure a high level of customer satisfaction through world class sales service. Be visible, friendly, and knowledgeableDrive and deliver sales targets and earn sales incentivesMaintain outstanding store conditions, uphold visual merchandising standards to optimize salesAscertain customers’ needs and wants and recommend items for saleProactively meet, greet, and assist customersAssist and resolve customer queriesWork on point-of-sale and ensure accurate processing of paymentsEnsure stock is always packed neat and products merchandisedRemain updated on product information, answer questions and address concernsAccurately describe product features and benefitsInform customer about product promotions and our private label brandCreate an inspiring and positive work environmentRequirements (what you need to do the job)Behavioral requirement:Passion for retailPositive attitudeSelf-motivatedProblem solving capabilitiesConfident, outgoing, and energeticStrong sales flair, engage and persuadeEnjoy dealing with customersStrong work ethic and hands-on attitudePunctual and reliableExcellent communication skills, proficient in English and AfrikaansCapacity to work a flexible schedule (weekends and evening shifts) according to the needs of the businessAbility to carry and pack stock or retrieve products for a customerTrustworthyWell groomed – Neat and take personal pride in appearanceQualifications and Experience:Minimum 1-year Sales or Customer service experience essential at least 6 months with one companyShop Floor and/or experience in retail (advantages)MatricClear Credit and Criminal recordKnowledge of various POS and stock management systems (advantages)What we Offer:We pay competitive, market-related salaries based on the number of hours worked.Sales incentives on sales targets achieved.An environment that builds retail experiences that are inviting, enjoyable and easy for the customer.*Kindly be advised, due to high levels of applications for this position- should you not hear back from us within two weeks you may consider your application unsuccessful.
14d
SavedSave
MAIN DUTIES AND RESPONSIBILITIES
Become fully conversant
with the point of sale and C.R.M. Computer software in your storeAssist customers on a
daily basis with their requirements including registrations of customer
details on the Bride & Co sideEnsure all orders are
processed, tracked and accounted for on a daily and weekly basisContinually communicate
with customers using tools made available to youEnsure all filing and
administration is up to date and filed correctlyEnsure all garments are
cleaned and steamed and quality controlled prior to final fittings and
collectionsEnsure all merchandise
in your designated area is cleaned, dresses to be steamed and kept clean
at all timesEnsure there are no
damaged merchandise and if any damages are noted, these need to be
reported to the Brand Manager and removed off the floor with the relevant
paperworkAssist with
merchandising of the store as well as general housekeepingAssist with ensuring all
stock rooms are tidy and organizedKeep all customers’
garments stored in the designated areas and ensure all are labeled and
stored correctlyFollow correct
procedures for restricted period garments and special request ordersAttend stock takes when
required whether during the week or weekends or overtimeAttend wedding shows or
trade exhibitions if/when required during the week or at weekends or
during overtimePlease note that your
duties may vary from time to time and that you shall be required to comply
with any reasonable request made of you during working hours.Your appointments
require flexibility as you may be transferred within branches from time to
time.
Training
If/when required by
Management you will attend training courses which may take place during
working hours, after working hours or on weekends.
General
· Attend stock takes when required whether during
the week or weekends or overtime
· You may be transferred to other stores
within the Company to assist with back logs of working, at Management’s
discretion. The transferred shops will be within the province where you live.
· To accept all other duties as specified by
your Superior. Please note that your duties may vary from time to time and that
you shall be required to comply with any reasonable request made of you during
working hours.
· You are expected to be on time each day and
to make every effort at all times to carry out your duties in a spirit of good
will, co-operation and enthusiasm.
Kindly email your CV to canalwalk@eurosuit.co.za by
17h00 on Sunday 5th May 2024.
19d
SavedSave
Experienced fitters needed for vinyl,laminate,carpet,epoxy and tile flooring.
Only day rate openings available.
No subcontractors.
Only apply if you have experience working at Flooring company with references.
Must stay near pick up points of Bellville and Brackenfell, Cape Town.
No emails.
Contact only by Call or WhatsApp
0824836161
25d
SavedSave
Hello my name is Wayne I'm Malawian male.looking for theJob as guesthouses housekeeper and house cleaner with good experience my job duties through cleaning apartment Washing, linen, ironing, cleaning bathroom's, cleaning windows, furnitures, vuccuming, mopping floor, making coffee and tea, Washing dishes, and any kitchen work. I'm also responsible for the general maintenance jobs plumbing, garden, painting plumbing, And more. please feel free to contact me 0813182193 work more than seven years experiences reference number is also available.
1mo
SavedSave
CONCRETE FLOOR
SUPERVISOR
MUST
PREFERABLY HAVE PREVIOUS CONCRETE FLOOR EXPERIENCE
MUST
BE ABLE TO WORK WITH ±16 EMPLOYEESMUST PREFERABLY RESIDE IN KUILS
RIVER/BLACKHEATH/BRACKENFELL AREASEND CV TO: jolenevanschalkwyk@gmail.com
1mo
1
Are You The One? Our company is looking for a sales person to join our dynamic team. Are you self motivated, go -getter attitude, take initiative, handle responsibility, Multi Task, Be a team member. Duties but not limited; Deliver excellent customer serviceAssist customers enquiries on floor and via telephoneHandle phonesMerchandisingWhat we looking for;MerchandisingTime Management skills Own Transport or live in proximity (Advantages)Take instructionsBe able to be a team playerTake initiative Go-Getter Personality Please list 2-3 contactable references- And Salary Expectations.Email your cv witbooi10@gmail.com
3mo
1
SavedSave
I'm very proud of my tiling work if need your floor tilling and bathroom remodeling don't hesitate to contact me on 0838856673 traceable references available
4mo
Save this search and get notified
when new items are posted!