Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Suggested
Results for jobs for forklift operators in Jobs in South Africa
1
SavedSave
We are currently recruiting for qualified Forklift Drivers /General Assistants to join our team in the following areas (surrounding Durban)
basic requirements :
*Matric
Must be in possession of valid forklift license
*Must be able to read ,write & speak fluently in EnglishResponsibility:*To load /off-loading of delivery vehicles
*To packing &stacking of goods securely in the warehouse &storage areas
*To be able to operate the forklift in confined areas
*To be operate the forklift following strict safety procedures
*To take full responsibility to check water,oil &fuel every morning
*To report any irregular operation/fault on the forklift to manager immediatelyJob Reference #: DRIVERConsultant Name: Renel Pillay
3d
1
We are looking for EXPERIIENCED ASSEMBLY WORKERS to employ at our factory in Centurion
Minimum requirements are as follows
Matric
Clear criminal records
Previous experience in assembly
computer literate
excellent time keeping
we are looking for the following people.
GENRERAL WORKERS
FORKLIFT DRIVERS valid license
SHRINKWRAP OPERATORS
DISPATCH CLERK
INVOICING CLERK
WAREHOUSE SUPERVISOR
ADMINISTRATOR
CODE 10 AND 14 DRIVERS WITH VALID PDRP
IF YOU MEET THE ABOVE REQUIREMENTS PLEASE EMAIL CVS TO recruitment1@riseupgroup.co.za
please indicate on the subject line forklift driver or general worker and area eg Centurion if nothing noted on the subject line your CV will not be considered
Responsibility:We are looking for EXPERIIENCED ASSEMBLY WORKERS to employ at our factory in Centurion
Minimum requirements are as follows
Matric
Clear criminal records
Previous experience in assembly
computer literate
excellent time keeping
we are looking for the following people.
GENRERAL WORKERS
FORKLIFT DRIVERS valid licence
SHRINKWRAP OPERATORS
DISPATCH CLERK
INVOICING CLERK
WAREHOUSE SUPERVISOR
ADMINISTRATOR
CODE 10 AND 14 DRIVERS WITH VALID PDRP
IF YOU MEET THE ABOVE REQUIREMENTS PLEASE EMAIL CVS TO recruitment1@riseupgroup.co.za
please indicate on the subject line forklift driver or general worker and area eg Centurion if nothing noted on the subject line your CV will not be considered!
Salary: RNMWJob Reference #: EXPERIENCED ASSEMBLY WORKERS CENTURION PRETORIAConsultant Name: Recruitment Rise Up Management
3d
1
SavedSave
KEY DUTIES AND RESPONSIBILITIES
Mould changes blowing equipment, ensure mould changes are complete in defined time framesBottle blowing start-up and processing in moulds that were used for established products to meet QA approvalMaintain good and continuous communication with Mould Change Over Manager, Maintenance and Shift SupervisorPlan and carry out first and second line servicing on a scheduled basis on machinesPerform diagnosis and problem solving on machinesProvide support in colour changes as neededMaintain good housekeeping within the departmentProvide ongoing support to production activitiesResponsible to report any risks identified for Quality and Food Safety Management where food contact product is produced in the plantEnsure on-going awareness of Quality, Food Safety, Environmental and Health and Safety ManagementEnsure housekeeping and general areas facilitates a tidy, neat environment
REQUIREMENTS
Technical qualification and good experience in plastic processingBasic Toolmaking, Mechanical or Electric/Electronic knowledgeAbility to operate forklifts and craneAbility and willingness to work a flexible scheduleMust be able to lift ±30 kgBasic computer skillsHigh cleanliness standards for the machines and work areaIt would be advantageous will be if he/she previously worked on Sidel, Sipa and ALS blow moulders
This is not an AA/EE appointment but preference will be given to South African Historically Disadvantaged Individuals (HDI) candidates.
If you have not received a response within 48 hours of submitting your resume, please consider your application as being unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNzUyNjA1NzU/c291cmNlPWd1bXRyZWU=&jid=374811&xid=275260575
3d
1
SavedSave
NOTE: THE FULL CONTENT OF YUR CV MUST BE ON THE ONLINE DATABASE TO PROCEED WITH YOUR APPLICATION
Raw Material Stores Senior Assistant needed by global chemical manufacturing company, duties and requirements include:
2 years minimum stores /warehousing experienceValid forklift licenseExperience in the chemical industryIssue raw materialsReceive raw materialsControl raw materialsPack and stack raw materialsSample raw materials upon receivingReceive and offload bulk containersWork with batch sheetsConduct required repacksOperate forkliftCarry out scale verificationsAdvise supervisor of any required replenishments timeouslyAssist in preparation for stock take as well as actual countingConduct daily and weekly cycle countsMaintain housekeepingAct as backup for stores supervisor when requiredParticipate in internal auditsAssist in preparation for external quality auditsworking in an ISO 9000 certified company
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNzY2MjY4NTA4P3NvdXJjZT1ndW10cmVl&jid=1285551&xid=1766268508
3d
1
Reach Stacker operator ; Transport large structure; construction; Mining; 45 tons ; Containers; 5 stack rows.
Duties & Responsibilities:Loading and unloading 40 Feet ISO shipping containers.
Stacking containers, 5 row high in allocated areas.- Warehouse / Container Park loading and unloading trucks, shipping containers, general forklifts- Experience operating a Container Forklift- Ability to Load and Unload Full/Empty containers onto company trailers and others- Good Communicator required as dealing with Drivers/Transport/E-logistic staff- Experience Stacking of containers to over height requirements suited to national compliance standards- 3/3 Roster- 12 Hour Shifts- Day & Shifts rotating
We are looking for candidates who have a flexible approach and can undertake a variety of production duties.Candidates will be required to remain focused under pressure, be a team player and have good attention to detail to achieve an accurate, on time service to our customer.Please note, to apply for this position, you must have:
Your own transport;
Valid certificate with 5 years full time experience on Reach stacker and Forklifts.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zNzE1ODIwNjc2P3NvdXJjZT1ndW10cmVl&jid=803436&xid=3715820676
3d
1
SavedSave
Our client is based in Stikland and they are seeking to employ Welders. Do you have a matric certificate and at least one years working experience within a welding or semi-skilled Boiler making position?
·Completed Grade 12 / Matric Certificate (certificate will be requested).
·Welding experience a must (Arc / Mig / Stick).
·Fabrication experience is a MUST.
·Forklift license is beneficial.
·Assistant operating of machinery experience beneficial.
·Must be hardworking and dedicated.
· Ability and willingness to work 12-hour shifts, including nightshifts and weekends.
· Clean criminal record.
AREA: Stikland (Transport will be own responsibility)
APPLY: Send your CV and all documents to megan@personastaff.co.za reception@personastaff.co.za
Persona Staff (Pty) Ltd.
reception@personastaff.co.za
3d
1
Our client is looking for a Forklift Driver with automotive experience and uploading and offloading of fragile equipment in confined spaces such as shipping containers.
RESPONSIBILITIES:
Maneuvering forklifts safely in busy industrial environments;Moving goods from storage areas to loading areas for transport;Unloading fragile equipment and safely relocating the goods to their designated storage areas;Ensuring that forklift driving areas are free from spills or obstructions;Regularly checking forklift equipment for faults or damages;Using industrial plastic wraps and wooden pallets to safely stack and package goods for transport;Keeping up to date on health and safety requirements and forklift operating procedures;Consolidating partial pallets for incoming goods
REQUIREMENTS:
Attention to detail;Sober habits;Special attention for sensitive equipment;Aware of safety standards;
EXPERIENCE:
5 - 8 years Uploading and offloading of fragile equipment in confined spaces such as shipping containers;Offloading fragile equipment from low beds;Experience offloading equipment where more than one forklift is used simultaneously;Stack containers safely;MANUFACTURING OR AUTOMOTIVE PROJECTS OFFLOADING ROBOTS & PANELS OFFLOADING;NO APPLICATIONS TO BE CONSIDERED IF EXPERIENCE ONLY WITHIN RETAIL & WHOLESALE, WE NEED EXPERIENCE WITHIN FRAGILE GOODS & EQUIPMENT;
QUALIFICATIONS: Matric Valid Forklift licence
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zOTg4OTM1MjAwP3NvdXJjZT1ndW10cmVl&jid=394659&xid=3988935200
3d
1
SavedSave
General Worker with Receiving and Dispatch Experience
Position Type: Ad-hoc Basis
Hourly Rate: R34 per hour
Location: North Riding
Job Description:
We are currently seeking a skilled and reliable General Worker with experience in receiving and dispatch operations, along with a valid forklift license. This is an ad-hoc position, and you will be called upon as needed.
Key Responsibilities:
Receiving and Dispatch: Efficiently handle the receiving and dispatch of goods, ensuring accuracy and timeliness.
Forklift Operation: Utilize a forklift to move, stack, and organize materials in a safe and organized manner.
Ad-hoc Availability: Be available for work on short notice, responding promptly to calls for assistance.
Team Collaboration: Work collaboratively with team members to achieve daily tasks and goals.
Safety Compliance: Adhere to safety protocols and guidelines while performing duties, ensuring a secure working environment.
Requirements:
Previous experience in receiving and dispatch roles.Valid forklift license.Physical fitness and ability to lift heavy objects.Flexible schedule for ad-hoc availability.Strong attention to detail.Team player with good communication skills.
Hourly Rate:
R34 per hour
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNzIwODY0MzkxP3NvdXJjZT1ndW10cmVl&jid=1750871&xid=1720864391
3d
1
The depot supervisor will manage the Germiston depot. The depot will service the needs of collect, walk-in and cash customers, as well as small truck deliveries to customers surrounding the depot locations. The goal of the depot supervisor is to ensure the site is managed cost effectively and efficiently through the team on site to provide outstanding customer service and experience.
EE Sage Line 500 Manufacturing Warehousing Depot Supervisor (Building Material), Germiston, Pension + Medical + Housing All + 13th Cheque
Requirements:
Education: Diploma (logistics, supply chain, business management, operations management or related field).Work Experience: a minimum of 3-5 years working in a manufacturing environment with logistics or warehousing experience in a similar role. Management experience in a similar role (added advantage)Computer literateSystems experience: Sage Line 500 or any other enterprise resource planning tool, MS Excel, Google slides, transport management system and Google SheetsForklift Licence (added advantage)
Duties:
Customer service
Understand the products and services we offer as a business.Handle all counter sales for collection, walk-in and cash customers.Maintain accurate documentation, record and file all paperwork for customer service activities and discussions.Align with existing customer service procedures, policies and standards.Elicit customer feedback to improve service offering at the depot.Assist to coordinate and manage customer focused activities aimed at promoting the business e.g. promotional days, training days, product launches, customer visit days etc.
Operations
Ensure health and safety regulations are adhered to by everyone on site (customers, employees and transporters).Supervise day-to-day operations of the depot.Develop and manage the approved budget for the depot to ensure costs are lower or in line with the budget.Analyse cost variances to understand cost drivers and implement solutions to prevent cost creep or excessive expenditure.Improve processes to increase efficiency of the depot.Develop an operating framework that will continuously run even if some team members are absent, to ensure daily operations are not affected.Work hand in hand with customer service, planning and logistics teams to ...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS85ODI0MjcyODc/c291cmNlPWd1bXRyZWU=&jid=1722922&xid=982427287
3d
1
The depot supervisor will manage the Germiston or Richard’s Bay depot. The depot will service the needs of collect, walk-in and cash customers, as well as small truck deliveries to customers surrounding the depot locations. The goal of the depot supervisor is to ensure the site is managed cost effectively and efficiently through the team on site to provide outstanding customer service and experience.
EE Sage Line 500 Manufacturing Warehousing Depot Supervisor (Building Material), Richards Bay, Pension + Medical + Housing All + 13th Cheque
Requirements:
Education: Diploma (logistics, supply chain, business management, operations management or related field).Work Experience: a minimum of 3-5 years working in a manufacturing environment with logistics or warehousing experience in a similar role. Management experience in a similar role (added advantage)Computer literateSystems experience: Sage Line 500 or any other enterprise resource planning tool, MS Excel, Google slides, transport management system and Google SheetsForklift Licence (added advantage)
Duties:
Customer service
Understand the products and services we offer as a business.Handle all counter sales for collection, walk-in and cash customers.Maintain accurate documentation, record and file all paperwork for customer service activities and discussions.Align with existing customer service procedures, policies and standards.Elicit customer feedback to improve service offering at the depot.Assist to coordinate and manage customer focused activities aimed at promoting the business e.g. promotional days, training days, product launches, customer visit days etc.
Operations
Ensure health and safety regulations are adhered to by everyone on site (customers, employees and transporters).Supervise day-to-day operations of the depot.Develop and manage the approved budget for the depot to ensure costs are lower or in line with the budget.Analyse cost variances to understand cost drivers and implement solutions to prevent cost creep or excessive expenditure.Improve processes to increase efficiency of the depot.Develop an operating framework that will continuously run even if some team members are absent, to ensure daily operations are not affected.Work hand in hand with customer service, planning and logistics teams to ensure activities run smoothly at the depot.
Stock manag...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80Mjc1MzgyOTUwP3NvdXJjZT1ndW10cmVl&jid=1722921&xid=4275382950
3d
1
SavedSave
Job Summary: As a Warehouse All-Rounder, you will play a crucial role in our warehouse operations by performing a wide range of tasks, including stock control, dispatching orders, and supervising a small team of warehouse staff. You will ensure the smooth flow of products through the warehouse and maintain a high level of organization and efficiency.
Key Responsibilities:
Stock Control:
Receive, inspect, and accurately record incoming shipments.Organize and store inventory in designated locations.Maintain accurate and up-to-date records of stock levels.Perform routine inventory counts and reconcile with system data.Identify and report any discrepancies or issues with stock.
Dispatch:
Prepare and package customer orders for shipping.Ensure all outgoing shipments are accurate and properly labeled.Coordinate with shipping carriers to schedule pickups and deliveries.Maintain shipping records and track the status of shipments.Handle returns, exchanges, and warranty claims efficiently.
Supervisory Skills:
Supervise a small team of warehouse personnel.Assign tasks, provide guidance, and monitor performance.Ensure that all safety protocols and procedures are followed.Train new team members and address any performance issues.Collaborate with the warehouse manager to optimize workflow.
General Warehouse Duties:
Keep the warehouse clean and organized.Operate forklifts and other equipment (if certified).Support receiving, picking, and packing operations as needed.Adhere to safety guidelines and promote a safe working environment.
Qualifications and Requirements:
High school diploma or equivalent; further education or certifications are a plus.Previous experience in a warehouse environment, including stock control and dispatch.Knowledge of inventory management software and computer proficiency.Strong organizational and time management skills.Excellent communication and interpersonal skills.Ability to lift and move heavy objects, as required.Forklift certification (if applicable).Leadership and supervisory experience is a plus.Commitment to safety and compliance with warehouse policies.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNDAwMTM3OTAwP3NvdXJjZT1ndW10cmVl&jid=1740251&xid=1400137900
3d
1
SavedSave
Our client, a Stikland-based company, is looking to hire Assistant Operators for a current project (contract position).
Apply today if you are willing to work 12-hour shifts, including nights and weekends, and you have a Matric certificate with at least one-year of work experience.
STRICT REQUIREMENTS:
• Completed Grade 12 / Matric Certificate (certificate will be requested).
• Machine operating experience.
• Welding experience (Advantageous)
• Forklift license is beneficial.
• Must be hardworking and dedicated.
• Ability and willingness to work 12-hour shifts, including night shifts and weekends.
• Clean criminal record.
HOW TO APPLY: Send your CV and all documents to liza-nelle@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Salary: R59 p/hJob Reference #: AMOConsultant Name: Liza-Nelle Swanepoel
3d
1
Required Minimum Knowledge, Skills Education / Experience Requirement(s):
Matric, Grade 12 or equivalent qualificationQualified Diesel and/or Petrol Mechanic, plus experience with forklifts or similar material handling equipment; or Qualified Forklift MechanicMinimum of 3-5 years’ mechanical, hydraulic and electrical experience pertaining to forkliftsGeneral working knowledge of auto electrical systems (ignition, starting, charging, illumination)Excellent work ethic – honest, reliable, hardworking, dedicated and takes pride in work carried outHighly developed prioritising and multi-tasking skills; strong sense of urgency; problem solving and decision-making skillsExcellent communication skills with people at all levels in an organisationDedication to service excellence in every aspect of work carried out; strong focus on attention to detail and accuracyExcellent communication skills with people at all levels in an organisation – must be able to converse fluently and comfortably in English; must be able to read and write EnglishAbility to work with little or no supervision and still complete tasks timeously; enthusiastic, self-motivated and can use own initiativeAbility to work under pressureAbility to understand and follow safety measures and precautionsAbility to interpret and apply technical informationAbility to read and interpret schematics, diagrams, operations manuals and manufacturer’s specificationsAbility to identify and correctly utilise relevant diagnostic equipment and specialised toolsWillingness and capability to continue learning and growing with new technology and modelsAbility to receive constructive criticismMaintain work area in clean and orderly conditionAbility to understand and follow safety measures and precautionsAbility to function effectively in a group and add value to the team / environmentAbility to work under extreme pressureAbility to manage own time – to work according to a schedule and complete set tasks in timeMust be of sober habits, have high energy levels and general good health – must be declared fit for physical performance requirements of these tasks - physically able to carry, lift, and move heavy objects; must be able to stand and sit for long periods of time; must be able to bend, stretch, twist and reach with body, arms and/or legs.As this position is part of a team that service a specialised industry and client requirements are paramount to the success of their businesses and the partnership between our company and theirs – candidates applying for this position must be able to do standby and work overtime as and when requested.
Required Certificates, Licences, Registrations:
Trade test certificate,...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNTQyNTQzMTAyP3NvdXJjZT1ndW10cmVl&jid=1616164&xid=2542543102
3d
1
Required Minimum Knowledge, Skills Education / Training and Experience Requirement(s):
Matric, Grade 12 or equivalent qualificationAccredited Forklift Lifting Machine InspectorMinimum of 3 years mechanical, hydraulic and electrical experience pertaining to forkliftsExcellent work ethic – honest, reliable, hardworking, dedicated and takes pride in work carried outHighly developed prioritising and multi-tasking skills; strong sense of urgency; problem solving and decision-making skillsExcellent communication skills with people at all levels in an organisationDedication to service excellence in every aspect of work carried out; strong focus on attention to detail and accuracyExcellent communication skills with people at all levels in an organisation – must be able to converse fluently and comfortably in English; must be able to read and write EnglishAbility to work with little or no supervision and still complete tasks timeously; enthusiastic, self-motivated and can use own initiativeAbility to work under pressureAbility to understand and follow safety measures and precautionsAbility to interpret and apply technical informationAbility to read and interpret schematics, diagrams, operations manuals and manufacturer’s specificationsAbility to identify and correctly utilise relevant diagnostic equipment and specialised toolsWillingness and capability to continue learning and growing with new technology and modelsAbility to receive constructive criticismMaintain work area in clean and orderly conditionAbility to understand and follow safety measures and precautionsAbility to function effectively in a group and add value to the team / environmentAbility to work under extreme pressureAbility to manage own time – to work according to a schedule and complete set tasks in timeMust be of sober habits, have high energy levels and general good health – must be declared fit for physical performance requirements of these tasks - physically able to carry, lift, and move heavy objects; must be able to stand and sit for long periods of time; must be able to bend, stretch, twist and reach with body, arms and/or legs.
Required Certificates, Licences, Registrations:
Recognised Forklift Lifting Machine Inspector qualificationCode 8 drivers licenceValid forklift operator licenceECSA Certificate/Registration Number
Key Performance Areas:
Perform load tests as per OHSACT requirements.Maintains vehicle maintenance and operational data / history by updating and timeously communication information that must go on record.Provide complete customer satisfaction in a polite and professional manner....
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMjcwOTA4OTA3P3NvdXJjZT1ndW10cmVl&jid=1612266&xid=2270908907
3d
1
SavedSave
One of our candidates in the food industry that is based in the Randburg area is looking for a Forklift Operator that has experience in dispatch and receiving that is willing to work on an ad-hoc basis.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yOTM1NjEzMjMzP3NvdXJjZT1ndW10cmVl&jid=1752853&xid=2935613233
3d
1
SavedSave
Our national client in the Materials Handling space, based in Cape Town (Joostenberg), is looking to employ an experienced Sales Representative; preferably with 2 – 3 years proven sales experience in the forklift industry.
Overview of role:
Rendering a high quality of customer service.Building new customer relationships and maintaining existing customer relationships.Meet monthly sales targets.
Requirements:
Grade 12.2 – 3 years proven sales experience in the forklift industry.Technical knowledge of the product.Computer literate including experience working on a CRM system.Proven track record related to sales achieved for the last 12 months.Must be always professional.
Responsibilities:
Maintaining existing customer relationships and sales, within a given sales territory.Build new customer relationships and sales, within a given sales territory.Resolve customer complaints by investigating problems, developing solutions, preparing reports and keeping management informed by submitting activity and results reports such as daily call reports, weekly work schedule and monthly/annually analysis reports.Generate own leads by cold calling and/or working on referrals.Close new business deals.Meet monthly sales targets.Know the opposition in your area.Monitor competition by gathering current marketplace information on pricing, products, new products, etc.Maintain professional and technical product knowledge.Perform site surveys before quoting on any equipment.Complete quotes and proposals for submissions to clients.Prospecting customers, add value to every call and ensure you know what you want to gain out of each visit.Ensure service supplied is relevant to current customer requirements.Ensure all sales administration is always correct and submitted on time.Conduct demonstrations of forklifts.Teamwork, support and assist each other.Adhere and enforce company policies and procedures.Facilitate with the handover on site.Assist in relevant operations/operational functions and sales administration as required.Maintain professional conduct.Ensure dress code is in accordance with company Standard Operating Procedures.
Skills required:
Customer serviceMeeting sales goalsClosing skillsTerritory managementProspecting skillsNegotiation skillsSelf confidencePresentation skillsCustomer relationshipsMotivation for salesTime managementPlanning appointments and diary keepinghttps://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMjg0MjIzOTg/c291cmNlPWd1bXRyZWU=&jid=1482457&xid=328422398
3d
1
SavedSave
Position: Production Planning Supervisor
Location: KZN - Westmead
Category: Manufacturing
Purpose:
The candidate should be detail-oriented and an experienced Production Supervisor to create, modify, and manage production schedules and to oversee the Sheet Metal Fabrication process. The production planner’s responsibilities include monitoring inventory levels, regularly providing production status updates to management, and facilitating the timely delivery of products to customers. You should also be able to closely monitor the production process to ensure that production orders are completed on time and within budget
Minimum Requirements:
Diploma in Production Management or Industrial Engineering5 years Planning and Supervising experience in a fabrication/ manufacturing environment.Expertise in manufacturing and or steel fabrication – preferableProficiency in MS Excel, Word, Outlook, PowerPointStrong analytical and critical thinking skill set with a strong technical aptitudeValid forklift license -preferable
Roles and Responsibilities:
Review order intake to determine customer requirements
Coordinate delivery of parts to expedite flow of material to meet production scheduleSupport purchasing in communicating demand for raw materials daily Expedite suppliers purchase orders if required:Release work orders to production for manufacturingCoordinate between warehouse and purchasing on material shortagesNotify Management of any schedule impacts to customersCoordinate/expedite manufacturing builds to ensure schedules are achievedCompletes status reports, such as production progress, customer information and materials inventory
Maintain lead-times as per sales requirements:
Exercises judgment within defined procedures and practices to determine appropriate action.Performs other duties as required
Key Performance Areas:
Estimating the amount of material, equipment, and labor required for production.Promptly addressing and resolving production issues to minimize delays in production.Coordinating production operations in accordance with material, labor, and equipment availability.Recommending viable solutions to reduce production costs as well as improve production processes and product quality.Effecting changes to production schedules to ensure that production deadlines are met.Compiling status and performa...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMjc0NDk2MzE0P3NvdXJjZT1ndW10cmVl&jid=1183371&xid=3274496314
3d
1
SavedSave
ASSISTANT OPERATOR / GENERAL WORKER:
Our client is based in Stikland and they are seeking to employ Assistant Operators / General Workers. Do you have a matric certificate and at least one years working experience? Are you willing and able to work 12-hour shifts that include nightshifts and weekends?
STRICT REQUIREMENTS:
• Completed Grade 12 / Matric Certificate (certificate will be requested).
• Milling and lathing experience will be an advantage.
• Forklift license is beneficial.
• Any assistant operating of machinery experience will be an advantage.
• Must be hardworking and dedicated.
• Ability and willingness to work 12-hour shifts, including night shifts and
weekends.
• Clean criminal record.
AREA: Stikland (Transport will be own responsibility)
PAY RATE: R49.56 per hour
APPLY: Send your CV and all documents to melanie@personastaff.co.za or phone 079 081 9385 for more information.
Only shortlisted candidates will be contacted, if you have not received any feedback within 48 hours your application has been unsuccessful.
melanie@personastaff.co.za
3d
1
SavedSave
Our national client in the Materials Handling space, based in Port Elizabeth, is looking to employ an experienced Sales Representative; preferably with 2 – 3 years proven sales experience in the forklift industry.
Overview of role:
Rendering a high quality of customer service.Building new customer relationships and maintaining existing customer relationships.Meet monthly sales targets.
Requirements:
Grade 12.2 – 3 years proven sales experience in the forklift industry.Technical knowledge of the product.Computer literate including experience working on a CRM system.Proven track record related to sales achieved for the last 12 months.Must be always professional.
Responsibilities:
Maintaining existing customer relationships and sales, within a given sales territory.Build new customer relationships and sales, within a given sales territory.Resolve customer complaints by investigating problems, developing solutions, preparing reports and keeping management informed by submitting activity and results reports such as daily call reports, weekly work schedule and monthly/annually analysis reports.Generate own leads by cold calling and/or working on referrals.Close new business deals.Meet monthly sales targets.Know the opposition in your area.Monitor competition by gathering current marketplace information on pricing, products, new products, etc.Maintain professional and technical product knowledge.Perform site surveys before quoting on any equipment.Complete quotes and proposals for submissions to clients.Prospecting customers, add value to every call and ensure you know what you want to gain out of each visit.Ensure service supplied is relevant to current customer requirements.Ensure all sales administration is always correct and submitted on time.Conduct demonstrations of forklifts.Teamwork, support and assist each other.Adhere and enforce company policies and procedures.Facilitate with the handover on site.Assist in relevant operations/operational functions and sales administration as required.Maintain professional conduct.Ensure dress code is in accordance with company Standard Operating Procedures.
Skills required:
Customer serviceMeeting sales goalsClosing skillsTerritory managementProspecting skillsNegotiation skillsSelf confidencePresentation skillsCustomer relationshipsMotivation for salesTime managementPlanning appointments and diary keepingAble to...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODgzMDUwNzkxP3NvdXJjZT1ndW10cmVl&jid=1482458&xid=3883050791
3d
1
SavedSave
SENIOR OPERATOR (MELT SHOP)
AIRPORT INDUSTRIA – CAPE TOWN
SA Steelworks has Senior Operator positions available. The successful candidates will provide support to SA Steelworks Meltshop Department. Applicants will be required to complete a skills test, only candidates with an average of 70% can successfully apply for the vacancy. (SHIFT POSITION)
Responsibilities will include but are not limited to:
Must be able to do basic mathematical calculations to ensure correct process parametersAccurate setup, adjustments, operation and maintenance of machinery/stands/ mechanism in the production line processConduct daily inspection of relevant work area and report possible failures or unsafe working conditionsMaintain standard machine operating procedures when operating machineryGeneral maintenance and cleaning of the work area/workstation you are responsible for
Must enforce and practice housekeeping policies
Effectively monitor production processAbility to analyze potential failures and communicate accordingly with possible solutions in a timeous manner
Ensure shift handover is conducted thoroughly and that all issues are reported clearly on a daily basis
Abiding by the regulations as set out in Occupational Health and Safety Act and
Company policies
Quality control according to set standardsAdhere to standard operating procedures (SOPs) as per tasks assigned
Applicants must have the following qualifying criteria:
Matric (Maths Compulsory)Diploma or studying towards a qualification in EngineeringComputer LiterateStrong knowledge of machineryAbility to detect machine discrepanciesPrevious experience operating FEL / Forklift / Grab advantageousExperience working in the steel industry advantageousAbility to work under pressure in a demanding environmentWillingness to work overtime and SHIFTSMust consistently be conscious of and compliant with Health & Safety rules and regulationsGood communication skillsIn good health, physically fit
Attributes:
Team playerConcentration & PrecisionAttentive to detailAbility to work independently
Excellent standards in execution
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS81MjM5NTc0NDU/c291cmNlPWd1bXRyZWU=&jid=1579070&xid=523957445
3d
Save this search and get notified
when new items are posted!
