Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Suggested
Results for maintenance fitter and turner in Jobs in South Africa
SavedSave
Experienced Conventional Machinist to be based in Randburg, Gauteng.
Minimum Requirements:
Relevant Technical Qualification (Fitter & Turner / Turner)Minimum 5+ years experience as a Conventional MachinistValid drivers licenseMust be able to operate a forkliftExperience operating the Turret Mill, Blocking Mill, Lathe, CNC Profile Cutter and CNC MillExperience with Quality Assurance / Control ManagementDuties / Responsibilities:
Operational efficiency:
Assist with welding, machining and other duties as required by management with regard to manufacturing.Maintain company housekeeping standards during daily factory operations.Attend monthly training as per training schedule. Maintain good timekeeping practices.Arrive for shift on time.Timely tea and lunch breaks.Good leave management.Operating the turret mill, blocking mill, Lathe, CNC profile cutter, CNC mill.Manufacturing of Spitzer clamps and enclosures.Operating the forklift. Quality Assurance and Control Management:
Complete all company required documentation timely, correctly including inspections, forms and records. Communication:
Report all irregularities, near-misses and incidents to management within the shift when it happens.Report required maintenance and irregular equipment functions to management immediately. Continuous improvement:
Assist with decreasing the number of reoccurring non-conformances.Assist and support with incident investigations.ONLY apply if you meet ALL the requirements
Kindly consider your application unsuccessful if you have not heard from us within 2 weeks
SECTOR: Engineering and Technical
Job Reference #: JHB000363/AH
3d
1
To ensure that all moulds and tools are processed through the tool room timeously and to a standard that will allow them to be run by production with minimal rejects.
Requirements:
Must be in possession of a Grade 12 School Leaving CertificateMust be a Trade Tested Toolmaker or Fitter/Turner MachinistThe Candidate must have sound knowledge of Pneumatics, welding, turning, milling and preferably CNC experience5 years working experience in an Automotive Manufacturing environment.
Responsibilities:
Ensuring that tools/moulds made in the Toolroom comply with ALL stipulated requirements.Ensure that tooling projects are completed within set timing constraints by clearly defined instructions and monitoring of staff.Planning for resource and material requirements.Staying within set budget parameters for tools/moulds. Tool/Mould MaintenanceMaintain and Repair all Tooling/Moulds used in the group so as to ensure minimal rejects or foam wastage.Develop new tooling or modify existing tooling when requiredDiagnose and repair faults on tooling during the production runManufacture basic tooling and production tooling to drawing or sample partMove, lift, lower and look after tooling Process/Productivity ImprovementsIdentify areas for improvement on Tool/Mould design and manufacture with a reduction in rejects and shortened lead time as the end result. FabricationDevelop and fabricate from complex drawingsMechanically cut, drill and punch fabrication materialsJoin metals using the resistance welding process, Weld work piece (oxy-acetylene welding, shielded metal arc welding, gas metal arc welding, gas tungsten arc welding)Remove metals using oxy-fuel and air-carbon arc gouging processesEnsure all equipment/machine tools are maintained and that tool room housekeeping is of a high standard at all times Maintenance Process (Scheduled)Receive Maintenance Schedules, interpret instructions and plan maintenance and repair workInspect the tooling and determine spares and consumables requirementsGenerate Job Requisitions for scheduled maintenance work (type of repair or maintenance, spares, quantities, time, etc.)Transport tools, equipment and spares to the work siteIsolate equipment, perform lockouts and make the work area safeConduct Preventive Maintenance activitiesPerform change overs in the production environmentPerform routine maintenanceAlign machines and equipmentDiagnose and repair faults on equipment and machinery during production/operationCommission and refurbish machines / equipmentOperate and monitor a drilling machine to produce componentsOperate and monitor a lathe to produce ...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xOTE3MjI3MDkzP3NvdXJjZT1ndW10cmVl&jid=1750638&xid=1917227093
3d
1
SavedSave
Matric plus N4 (Mechanical Engineering)Completed an apprenticeship in Mechanical Fitting / Fitter & Turner.A recognized Trade Test certificate, Mechanical Fitting / Fitter & Turner.At least 5 to 8 years heavy industrial fitting experience.A good knowledge of hydraulics and pneumatics.A specific knowledge of Front-End Equipment (dewatering mills & carriers).Good fault-finding / problem solving skills.Ability to read and understand drawings and diagrams.A good understanding of the principles and techniques associated with condition based monitoring and modern alignment.Computer literate & conversant with planned maintenance system will be an added advantage.Sugar Mill experience will be an added advantage.Rigging experience.Turning/Welding
Key Focus Area:
Carry out plant inspections and schedules as per scheduled maintenance manualCarry out maintenance, overhauls gearboxes, pumps, centrifugals, fans, repairs on hydraulic etc.Perform Project work, such as installation of conveyors when required.Carry out fault finding on pneumatic systems.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMzIwMzYzNDY4P3NvdXJjZT1ndW10cmVl&jid=1250263&xid=1320363468
3d
1
SavedSave
Fitter & Turner
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements:
• Grade 12 / National Senior Certificate.
• Section 13 Fitter and Turner Trade Test Certificate.
• 3 - 5 years post trade experience.
• Experience within a manufacturing environment (beneficial).
• Energetic, proactive and able to work under pressure.
• A valid driver’s license with own reliable transport.
Skills and Knowledge Required:
•Preventative Maintenance Routines.
•Welding (Mig Tig & Arc), Milling, and Turning.
•Planning - Check that all part complies with procurement register and data pack. (Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
•Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
•Drilling and/or slotting holes: Proper use of hand drill, Mag base drill, machining machine, etc.
•Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc. (Prep for next phase)
•Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack. (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
•Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
•Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
•Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
•Pneumatics and Hydraulics.
•Gearboxes.
•Water Systems and Cooling Towers.
•Basic Electrical Experience.
•Bearing and Shaft Changing.
•Fault Finding and Diagnosis.
•Lubrication.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
3d
1
SavedSave
Oversee Fitters and Turners, Seamer Technicians, and boiler making and manufacturingEngineering warehouse and procurementEngineering planning (preventative maintenance schedules)Boiler and steam servicesWater reticulation servicesAir reticulation servicesMobile equipment such as forklifts and utility vehiclesProcessing machinery, which includes rotary cookers and retorts as well as aseptic sterilizerLabelling department, which includes palletizing, labelling, packagingOversee Electrical and InstrumentationProduction personnelStudent and apprentice mentoring
Minimum Requirements:
Matric or N3 Technical Certificate in Millwrights/Electrical/MechanicalN6 Technical Certificate and/or Degree in Mechanical Engineering will be added an advantage.3 to 6 Years’ experience in both Electrical and Mechanical FieldProven Track record of leading the TeamFitter and Turner Trade certificate or any related Engineering StudiesComputer Literacy (MS Word, Excel, Outlook)Strong knowledge of Seamers will be added as an advantageLabelling Machine BackgroundSteam Boiler knowledgeFood Processing Equipment experience will be advantageousCan Food Processing Equipment (CFPE) experienceWilling to work in Dzanani- Limpopo
Knowledge and Skills required:
Knowledge of FMCG equipmentGood Leadership SkillsStrong in Electrical Components (PLC)Excellent knowledge of Food Processing EquipmentKnowledge of sterilization equipmentExcellent communication skillsAbility to work under pressureAbility to work as an individual and as a teamTime management skillsNumerical abilitiesPlanning and Organizing skillsGood project management skills
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yOTgwMDAyNjEwP3NvdXJjZT1ndW10cmVl&jid=1312858&xid=2980002610
3d
1
Fitter & Turner (R&D Testing Artisan)
An internationally established Manufacturing company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible for attending all breakdowns on machines.
Monitor, report, and amend all stock and nonstock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to the progress of repairs and diagnosis of faults.
Report on the duration of downtime on the maintenance job card.
Responsible for tracking and upkeep of all service history information.
Preventative Maintenance
:Responsible for all Chain CU Jigs, R&D Testing & Zinc Plating.
Responsible for utilizing breakdown service & inspection data to motivate improvements on all above-mentioned production lines.
Responsible for reporting & investigating unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all responsible production lines.
Responsible for continuous improvement on maintenance procedures and checklists.
Responsible for interacting with the maintenance department relating to any changes, and improvements following investigations on breakdowns, improvements on downtime etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to the Design department relating to improvements & issues on all relevant production lines.
Responsible for ensuring all necessary tools & equipment are available and in working condition.
Responsible for reporting any deviations to original as-built drawings/designs on all responsible machinery and components.
Liaise with the Projects Engineer on the commissioning of all new responsible machinery and components.
Responsible for innovation and improvement of all responsible machinery and components
Responsible for interacting with R&D, Design, and contractors on testing phases of all responsible machinery and components.
Please forward your CV to liza-nelle@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. I
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004790/LN&source=gumtree
3d
1
SavedSave
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements:
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Skills and Knowledge Required:
. Preventative Maintenance Routines.
. Welding (Mig Tig & Arc), Milling, and Turning.
. Planning - Check that all part complies with procurement register and data pack. .... (Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
. Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
. Drilling and/or slotting holes: Proper use of hand drill, Mag base drill, machining machine, etc.
. Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc. (Prep for next phase)
. Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack. (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
. Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
. Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
. Pneumatics and Hydraulics.
. Gearboxes.
. Water Systems and Cooling Towers.
. Basic Electrical Experience.
. Bearing and Shaft Changing.
. Fault Finding and Diagnosis.
. Lubrication.
Please forward your CV to reception@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
reception@personastaff.co.za
3d
1
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements:
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Responsibilities:
Attend to all breakdowns promptly across various production machines.
Monitor and manage stock levels of critical spare parts in the Stores & Maintenance department.
Provide detailed reports to Maintenance & Production regarding repair progress and fault diagnosis.
Record downtime duration on maintenance job cards for analysis.
Maintain comprehensive service history records for all equipment.
Conduct preventative maintenance on Chain CU Jigs, R&D Testing, and Zinc Plating lines.
Utilize breakdown and inspection data to drive improvements across production lines.
Investigate and report unforeseen limitations or stoppages during planned services.
Perform regular weekly, monthly, and yearly services on designated production lines.
Continuously improve maintenance procedures and checklists.
Collaborate with the maintenance department to implement changes and improvements following breakdown investigations.
Monitor and report on the condition of machine components.
Provide feedback to the Design department for improvements and address issues on relevant production lines.
Ensure availability and functionality of necessary tools and equipment.
Report any deviations from original designs and collaborate with Projects Engineer for commissioning of new machinery.
Drive innovation and improvement in machinery and components.
Collaborate with R&D, Design, and contractors during testing phases.
Please forward your CV to craig@personastaff.co.za and indicate your salary expectations.
Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant.
megan@personastaff.co.za
3d
1
SavedSave
Oversee Fitters and Turners, Seamer Technicians, and boiler making and manufacturingEngineering warehouse and procurementEngineering planning (preventative maintenance schedules)Boiler and steam servicesWater reticulation servicesAir reticulation servicesMobile equipment such as forklifts and utility vehiclesProcessing machinery, which includes rotary cookers and retorts as well as aseptic sterilizerLabelling department, which includes palletizing, labelling, packagingOversee Electrical and InstrumentationProduction personnelStudent and apprentice mentoring
Minimum Requirements:
Matric or N3 Technical Certificate in Millwrights/Electrical/MechanicalN6 Technical Certificate and/or Degree in Mechanical Engineering will be added an advantage.3 to 6 Years’ experience in both Electrical and Mechanical FieldProven Track record of leading the TeamFitter and Turner Trade certificate or any related Engineering StudiesComputer Literacy (MS Word, Excel, Outlook)Strong knowledge of Seamers will be added as an advantageLabelling Machine BackgroundSteam Boiler knowledgeFood Processing Equipment experience will be advantageousCan Food Processing Equipment (CFPE) experienceWilling to work in Dzanani- Limpopo
Knowledge and Skills required:
Knowledge of FMCG equipmentGood Leadership SkillsStrong in Electrical Components (PLC)Excellent knowledge of Food Processing EquipmentKnowledge of sterilization equipmentExcellent communication skillsAbility to work under pressureAbility to work as an individual and as a teamTime management skillsNumerical abilitiesPlanning and Organizing skillsGood project management skills
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80MDc0MDMyMzIzP3NvdXJjZT1ndW10cmVl&jid=1312859&xid=4074032323
3d
1
Fitter & Turner (6 – Month Contract)
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified Fitter and Turner in their Projects Department.
Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
1-2 years post trade experience.
Experience within a manufacturing environment (beneficial)
Responsibilities
Breakdowns:
Responsible to attend breakdowns on all machines.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of Induction ovens & temper furnaces service history information.
Liaise with Induction Coil Specialist and Induction Generator Specialist on any breakdowns regarding all Induction ovens & temper furnaces and commissioning thereof.
Preventative Maintenance
:Responsible for Induction ovens & temper furnaces standardization per production unit.
Responsible to utilize breakdown service & inspection data to motivate improvements on all Induction ovens & temper furnaces lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly services on all Induction ovens & temper furnaces
Responsible for continuous improvement on maintenance procedures and checklists
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all Induction ovens & temper furnaces.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all Induction ovens & temper furnaces.
Liaise with Projects Engineer on commissioning of all new Induction ovens & temper furnaces.
Responsible for innovation and improvement of all Induction ovens & temper furnaces
Responsible to interact with R&D, Design, and contractors on testing phases of all Induction ovens & temper furnaces machines.
Please forward your CV to megan@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal In
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004864/MM&source=gumtree
3d
1
Good day I'm unemployed and is in need of a job im a maintenance fitter and turner with more than 20 years experience reside in the cape town area please contact me via 0634084013 whatsapp or call thank you.
6d
SavedSave
Good day I'm looking for employment I'm in the engineering and maintenance sector as a fitter and Turner from the Western Cape please be so kind if there is anything available call or WhatsApp 0634084013 thank you.
11d
SavedSave
Qualified Toolmaker/ Fitter & Turner required for a well-established Lanseria based manufacturing
company.
Minimum 5-7
years post qualification experience in a production environment.
Responsibilities:Notable
experience in tool and die making, including designing and fabricating new
tools and dies.Proficiency
in operating tool-room equipmentMaintaining
and repairing existing tooling and attend to machine breakdowns and ensure that
all machines are serviced and maintained.Strong
attention to detail and problem-solving skills whilst ensuring quality control
standards are met with a passion for quality. Roll
Former and Tubing making machine experience and setting of machines
(Advantageous)Knowledge
and ability to work on a range of CNC type machinery (Advantageous)Conduct
and co-ordinate all maintenance on machinery and equipment in the departments.Optimize
tooling processes whilst Assist production to achieve optimum efficiencies and
implement continuous improvement opportunities.Ensure
that adequate training and safety protocols are maintained.Candidate
needs to Self-motivated and Able to work independently and in a team
environment with a results-driven mindset.
If you wish
to apply, please send your CV to gary@kingbrands.co.za
Should you
not hear from us in the next two weeks, please consider your application
unsuccessful.
10d
