Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Suggested
Results for jobs maintenance in Jobs in Port Elizabeth
1
SavedSave
The HSE & Maintenance Supervisor role is to protect the safety of all employees and to ensure effective occupational, health & safety coordination for Vehicle Manufacturers SA (Pty) Ltd in compliance with the Occupational Health & Safety Act. Plan, prioritize, assign, supervise, review, and participate in the work of staff responsible for safety, health and the environment. To ensure effective coordination of the security service provided to Company on a continuous basis to protect them from any loss or criminal activity. To ensure that all security related systems & infrastructure is monitored and maintained continuously. To ensure proper communication regarding all security & safety related matters with all relevant sub-ordinates, peers and management Duties / Responsibilities: Coordinate & monitor security service provider contract;Ensure monthly minute meetings are held with the service provider;Ensure compliance with Site Procedure Manual and Policies & Procedures;Ensure all security are aware and alert;Ensure proper access control is conducted on a daily basis;Ensure record keeping of all persons and property entering or leaving the premises;Ensure daily proper searching is conducted;Review Site Procedure Manual annually or as required depending on operational needs;Ensure regular inspections on CCTV System, gates, locks, fences as well as any other security infrastructure;Compile a monthly report on all and any security issues including cost;Report any and all deviations to the National Security Manager;SAFETY, HEALTH & ENVIRONMENT MATTERSInspecting workplaces to investigate accidents, causes of ill-health and complaints;Inspecting workplaces to enforce safety rules;Initiate ways to improve safety, health & environmental standards;Developing safety, health & environmental management schedules and strategies;Keeping up to date with the legislative and technical knowledgeEnsure and conduct proper administrative compliance in conjunction with the Occupational Health & Safety Act as well as FAW Policies & Procedures;Develop, implement and maintain an effective program and ensure compliance to satisfy the requirements of local legislation e.g. the OHS, COID and Environmental Management Acts;Develop systems to ensure all employees comply with all relevant legal safety requirements;Identify safety training needs, organise and co-ordinate safety training courses and prepare training material where appropriateCo-ordinate monthly safety meetings: Ensure meeting times are set; Agendas are sent out;Minutes are kept and sent out;Ensure that all support documentation in respect of the safety program is received on time and in the correct format from all concerned parties;Assist in appointment of safety representatives for all departments;Coordinate and ensure all other appointments in relation with the occupational, health & safet
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzYwOTMzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1140259&xid=1109_60933
2y
1
SavedSave
Our Port Elizabeth based client, a national manufacturing and installation concern is seeking to employ a qualified Junior Refrigeration Technician. The primary responsibility will be commissioning of plants. Requirements: Refrigeration trade or electrical with refrigeration experience with3-5 years’ experience.Qualified Trade Tested Electrician with refrigeration experience.Valid drivers licence.sound knowledge of refrigeration systems.excellent communication skills are essential.Self-motivated.High work ethic and good discipline Responsibilities: Maintenance and installation.Fault finding abilities.Project management.International travel (into Africa) - dependent on Covid-19 restriction, may become available. This is an awesome opportunity to join a growing and dynamic business! If you are not contacted within two weeks of applying, please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzgyNDQzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1211130&xid=1109_82443
2y
1
SavedSave
Qualifications / Requirements: Qualified Trade Tested ElectricianMinimum of 5 years’ post trade test experience in a manufacturing environmentMust have general electrical experience as well as PLC experienceMust have own reliable transportKey Performance Areas: Conduct breakdown and preventative maintenance on plant machinery and equipmentAssist in installation and commissioning of new equipmentPerform and sign off on allocated job cardsTest and evaluate equipment for irregularitiesReading and interpreting Electrical drawings for faultfinding purposesUse the planned maintenance system with reference to the maintenance schedules and shutdown maintenance schedulesAdhere to both industry quality standards and the requirements of ISO 9001Safety installations and compliance with SANS 10142 is imperative for all installations
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzgyMDAxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1210677&xid=1109_82001
2y
1
SavedSave
*Reference: DBN001899-LP-1*
A global company within the fuel, oil and gas industry is seeking a Senior System Analyst to be responsible for the company’s communications, maintenance, reliability, support, and continuation of operations within the group. This includes the maintenance and security of the company’s computer systems and the ability to identify and anticipate potential issues and report on them. Based in Port Elizabeth.
This is a highly technical role, and you will be performing duties that align with 1st, 2nd and 3rd Line Support functions and effective end user as well as senior stakeholder communication is essential
*
Qualifications and Experience:*
* Grade 12/Matric.
* Basic Degree or Diploma in IT with relevant IT certifications.
* CompTIA Network+ or CCNA advantageous.
* Minimum 7-10 years’ experience in IT Analyst or Administration field.
* Any type of development and programming is advantageous.
* CMD, powershell or VB scripting added advantageous.
*Knowledge and Skills:*
* Working knowledge of Wintel desktop systems; Windows 10, Office 2016 and Office 365, and EUC.
* Working knowledge of Microsoft server and services such as Active Directory, DNS and DHCP.
* Working knowledge of MS Azure, Azure Active Directory.
* Working knowledge of Cisco firewall/switches, Microsoft Server 2012 and 2016 and HyperV.
* Proactive troubleshooting skills.
* Impeccable verbal and written communication skills.
* Well organised.
* Very good time and priority management skills.
*Duties and responsibilities:*
Ensure all systems are operational, adequately monitored and maintained:
* Provide day to day end-user support
* Troubleshoot any ad hoc IT issues
* Monitor, manage and actively patch servers and workstations
* Periodically review server logs for potential problems
* Patch workstation clients and applications regularly
* Adhere to IT framework and policies in accordance to Group standard
* Manage and monitor fax, print and copier services and facilitate daily operations.
Support internal stakeholders and manage third party vendors:
* Understand the business functions and improve IT processes.
* Conduct staff training when necessary.
* Support users on in-house developed and deployed applications
* Participate and manage project rollouts.
* Manage external vendors, monitoring SLA.
* Ensure outsourced services are in-line with Service Level Agreement.
Perform IT reviews and assessment of procedures and controls:
* Create and maintain documentation on IT manuals and procedures.
* Implement and manage new processes.
* Prepare regular and ad hoc systems reports.
Ensure efficiency in responding to and fixing user problems:
* General desktop support: Printing setups. Office and Application support.
* Creating users, resetting passwords, access levels, file interface validation, etc. across all clients.
* Remotely manage South African office IT operations and support end-users.
* Manage telecommu
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzU3NjQ1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1246143&xid=1555_57645
2y
1
The Role: FTTH Contact Centre Teamleader Based in Port Elizabeth Permanent Position Basic Salary The position of the Team Leader is to lead an inbound FTTH team and to maintain quality of service delivered in conjunction with iSonxperiences customer goals and objectives. The Teamleader is also expected to work within all teams of the Contact Centre to ensure that Customer Experience is delivered all the time. Main Responsibilities will include but will not be limited to: ¨Leading and managing a team of +- 13 agents¨Coaching and developing agents through continuous one-on-one sessions i.e. daily, weekly and monthly¨Attendance and leave management process and updating matrix¨Manage and motivate agents through different formsQuality management/improvement through call evaluations for each agent weekly¨Ensure that all agents meet agent adherence and reach service levels (Basic Metrics i.e. NPS, FCR and AHT).Set key performance indicators for agents and review agent performance according to KPIâ??s in conjunction with Contact Centre Manager on a regular basisAssist in agent career development and identify training needs¨Resolve daily queries and promote service delivery¨Compile reports and report on progress¨Liaise daily with Workforce Management team to ensure effective resource planning.¨Taking correct disciplinary measures where necessaryCompilation, development and maintenance of descriptive and statistical reporting on a daily, weekly and monthly basisStrong internal and external relationship buildingEnsure escalations processes are maintained and implementation of new processes with team buy inSkills and Experience: QUALIFICATIONS AND EXPERIENCE : Previous Team leader experience within a Contact Centre environment (Customer Service /Technical FTTH)Good performance management experienceExperience of website navigation functionalities, technology savvyGrade 12 CertificateIT Background would be an advantageIn possession of an A+, N+, MCSE or CCNA qualification will be advantageousPROFESSIONAL AND INTERPERSONAL SKILLS: Excellent communication both oral and writtenDemonstrate the ability to manage work load and prioritize activitiesHigh level of integrity , professionalism and trustworthinessProblem solving skillsExcellent Attention to detailA successful track record in meeting targets and achieving premium customer servicePositive attitude to work.      Â
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzY0NTI4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1229042&xid=1108_64528
2y
1
SavedSave
Our client based in Port Elizabeth is looking for an experienced Senior Accountant. The role will be to effectively coordinate the day-to-day financial processes of the Company. This will involve planning, monitoring and reporting on Financial functions related to the Company such as: General ledger; Debtors; Creditors; Inventory; Manufacturing (Job costing) / Invoicing; Fixed assets; Trial balance; Income statement; Cash flow forecast; Balance sheet; Petty cash; Payroll; Cash book and Bank. This position will report to the Managing Director. Key Performance Areas Experience and Qualifications 3-5 years relevant experience within a similar position essential.Relevant degree in finance, accounting and administration essential.Ability to roll-up sleeves and work with team members in a hands-on management capacity.Strong financial knowledge in the consolidation of results, financial and management accounting, audit, taxation and corporate financing within a commercial environment.A keen eye for detail and desire to probe further into dataStrong cashbook, creditors, debtors and inventory essentialProven experience in processing journals and accounting processesValid driver’s license and reliable transport Computer LiteracyWorking knowledge of Pastel Partner (Accounting System) - essential.Working Knowledge of Pastel Payroll (Payroll System) - essential.Working Knowledge of Nedbank Business Banking - essential.Advanced knowledge in MS Office Excel – essential.Intermediate knowledge in other MS Office packages (e.g. Word, Power Point etc.)Intermediate knowledge of virtual programmes (e.g. MS Teams, Zoom etc.)Accounting and financial control Responsible for the integrity of the Trial Balance and Pastel sub books. Ensure that all data captured into the system is valid, accurate and complete and in line with financial reporting standards.Responsible for processing up to Trial Balance level (Financial Statements).Processing, reconciliation and balancing of intercompany transactions.Project control, job costings, analysis of job cards and reporting thereon (includes WIP, accruals, etc.).Processing of month end and year end journals (standard and ad hoc).Monthly close off of Pastel sub books.Pastel Control / Maintenance.Monthly reconciliation of balance sheet accounts / Pastel sub ledgers using an electronic template.Prepare, interpret and submit monthly management accounts and annual reports according to timelines using Pastel and Excel.Providing and interpreting financial information when required.Responsible for attending to all audits and ensuring that deadlines are met (Financial, SARS and internal).Maintain Insurance policies and manage claim procedures.Assist management with the annual budgeting process.Provide feedback by using an internal system, as well as using this platform to
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzQxMTYxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1129078&xid=1108_41161
2y
1
SavedSave
Our Port Elizabeth client, a leading player in the IT space, with clients in more than 30 countries around the world; is seeking to employ an experienced Full Stack PHP Developer.The appointed candidate will alternate between working from home and working from the office (hybrid staffing model).The Ideal candidate must be able to work well within a team reporting to the development manager, self-motivated, ambitious and have a burning desire to build a world class application.Proficient understanding of code versioning tools:GitHubAngularJS,PHP,Propel,SQL, andAWS Responsibilities:Implementation of new and the maintenance of the current set of services and APIs to power the web applicationBuilding reusable code and libraries for future useOptimization of the application for maximum speed and scalabilityImplementation of security and data protectionTranslation of UI/UX wireframes and documentation into visual elementsIntegration of the front-end and back-end aspects of the web applicationSkills:Proficient knowledge of our technology stack.Extensive and proven experience with an object orientated programming language.Understanding differences between multiple delivery platforms (such as mobile vs, desktop), and optimizing output to match the specific platformCreate clean, maintainable, and scalable codeCreate REST based web services and APIs for consumption by mobile and web platformsData migration, transformation, and scriptingManagement of hosting environment, including database administration and scaling an application to support load changesAbility to implement automated testing platforms and unit testsShould have knowledge of advanced JavaScript libraries and frameworks such as AngularJSProficient understanding of code versioning tools: GitHub, AngularJS, PHP, Propel, SQL, and AWSQualifications / Requirements:Minimum of 3-5 years relevant work experienceA relevant degree would be advantageous, however, is not a requirement
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzM4MTEzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1123505&xid=1266_38113
2y
1
SavedSave
*Reference: JHB005765-Shadi-1*
Datacentrixs offices in PE are looking for a Senior Support Engineer to provide cloud infrastructure, datacenter software and end user computing support. Must have patch management experience as well as experience in Cloud Services: Azure, AWS, Google cloud, VMware vSphere, MS Hyper-V, Nutanix AHV, Citrix Virtualisation, Backups in Veeam, Backup Exec and Monitoring in N-Central, SCOM, PRTG, WhatsUp, Solarwinds, Nagios, Quest.
*Requirements:*
* Grade 12 and relevant IT Qualification
* Minimum 10 years’ experience supporting ITC environments
* Certification in MCSE, VCP, CCE, HPE (DC) (end User), DELL (DC) (end user), VMWare, VEAAM
* Server Support experience in the following technologies:
* *Cloud Services: Azure, AWS, Google cloud*
* *Virtualisation: VMware vSphere, MS Hyper-V, Nutanix AHV*
* *Citrix Virtualisation*
* *Application Delivery Controllers: F5, Citrix, FortiADC*
* *Operating Systems: All Microsoft & Linux*
* *MS infrastructure: Active Director, Exchange, SQL, SCCM*
* *Backups: Veeam, Backup Exec*
* *Monitoring: N-Central, SCOM, PRTG, WhatsUp, Solarwinds, Nagios, Quest*
* *Antivirus: McAfee, ESET, Symantec, Kaspersky*
*
Overall Responsibilities:*
* Assist with escalations from 2nd line support engineers
* Provide 3rd line datacentre software support
* Preventative maintenance (Patch management)
* Remediate issues identified by audit and monthly reporting
* Technologies include (but not limited to)
* Cloud Services: Azure, AWS, Google cloud
* Virtualisation: VMware vSphere, MS Hyper-V, Nutanix AHV
* Citrix Virtualisation
* Application Delivery Controllers: F5, Citrix, FortiADC
* Operating Systems: All Microsoft & Linux
* MS infrastructure: Active Director, Exchange, SQL, SCCM
* Backups: Veeam, Backup Exec
* Monitoring: N-Central, SCOM, PRTG, WhatsUp, Solarwinds, Nagios, Quest
* Antivirus: McAfee, ESET, Symantec, Kaspersky
* End User computing
* Storage area network and Networking
R
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzgwMTVfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1136931&xid=1555_8015
2y
1
SavedSave
Our client based in Port Elizabeth is looking for an experienced Senior Accountant. The role will be to effectively coordinate the day-to-day financial processes of the Company. This will involve planning, monitoring and reporting on Financial functions related to the Company such as: General ledger; Debtors; Creditors; Inventory; Manufacturing (Job costing) / Invoicing; Fixed assets; Trial balance; Income statement; Cash flow forecast; Balance sheet; Petty cash; Payroll; Cash book and Bank. This position will report to the Managing Director. Key Performance Areas Experience and Qualifications 3-5 years relevant experience within a similar position essential.Relevant degree in finance, accounting and administration essential.Ability to roll-up sleeves and work with team members in a hands-on management capacity.Strong financial knowledge in the consolidation of results, financial and management accounting, audit, taxation and corporate financing within a commercial environment.A keen eye for detail and desire to probe further into dataStrong cashbook, creditors, debtors and inventory essentialProven experience in processing journals and accounting processesValid driver’s license and reliable transport Computer LiteracyWorking knowledge of Pastel Partner (Accounting System) - essential.Working Knowledge of Pastel Payroll (Payroll System) - essential.Working Knowledge of Nedbank Business Banking - essential.Advanced knowledge in MS Office Excel – essential.Intermediate knowledge in other MS Office packages (e.g. Word, Power Point etc.)Intermediate knowledge of virtual programmes (e.g. MS Teams, Zoom etc.)Accounting and financial control Responsible for the integrity of the Trial Balance and Pastel sub books. Ensure that all data captured into the system is valid, accurate and complete and in line with financial reporting standards.Responsible for processing up to Trial Balance level (Financial Statements).Processing, reconciliation and balancing of intercompany transactions.Project control, job costings, analysis of job cards and reporting thereon (includes WIP, accruals, etc.).Processing of month end and year end journals (standard and ad hoc).Monthly close off of Pastel sub books.Pastel Control / Maintenance.Monthly reconciliation of balance sheet accounts / Pastel sub ledgers using an electronic template.Prepare, interpret and submit monthly management accounts and annual reports according to timelines using Pastel and Excel.Providing and interpreting financial information when required.Responsible for attending to all audits and ensuring that deadlines are met (Financial, SARS and internal).Maintain Insurance policies and manage claim procedures.Assist management with the annual budgeting process.Provide feedback by using an internal system, as well as using this platform to
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzQxMTYxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1129078&xid=1108_41161
2y
1
Overseeing daily operations, conducting regular inspections, devising and implementing site procedures, preparing and filing reports, handling emergencies, supervising and evaluating staff, setting project goals and scheduling and meetings.
Management of day to day project delivery within a geographical area, including delivery to Virgin Media requirements, safety, quality, street works, supplier performance and improvement.
Drive a Safety First and Right First Time culture across the field operations backed up through plans and engagement with suppliers.
Ensure accidents, incidents and near misses, quality failures and service deterioration trends are investigated competently and corrective action is taken where and when appropriate.
All direct reports to have clear performance objectives and regular 1:1 meetings used to drive engagement.
Manage staff, oversee work schedules and assign specific duties accordingly.
Deliver quality service to the client ensuring that performance standards & contractual KPIs and SLAs are met ensuring that performance standards & contractual KPIs and SLAs are
To ensure the performance standards of project staff by holding regular reviews and reporting back to the Project Manager
Communicate closely and provide timely and accurate periodical reports to Project Manager
Installing, Tracing, repairing & maintenance on the network lines
Network splicing, ensure correct splicing
Network updates
Ensure splicing are according to spec
Ensure the splice diagram is correct
Fault finding of the network
Building network lines MDU’s,
Test faulty lines, power reading
Provide and receive in-house training once a month for overall improvement in work improvement in work performance and productivity.
Splicing, ONT activations and configurations,
Civils and Customer Liaison
Minimum of 3 years supervisory and with the telecommunications industry.
FTTH Optic Fibre experience
Proven track record of successfully managing teams, including contractor partners
Openserve or Telkom Experience
Good commercial acumen
Ability to understand, manage and deliver KPI s
Ability to lead, motivate and manage field teams.
Ability to contribute technical knowledge to proposals and reports
Excellent literacy, numeric and IT skills including proficiency in Microsoft Office
Excellent interpersonal and communication skills
Innovative, creative and proactive with a solution oriented approach
Flexibility in line with business requirements
Ability to represent the company in a professional manner at all times
Commercially focused and aware
Full, clean driving licence
Market Related
Minimum of 3 years supervisory and with the telecommunications industry.
FTTH Optic Fibre experience
Proven track record of successfully managing teams, including contractor partners
Openserve or Telkom Experience
Good commercial acumen
Ability to understand, manage and deliver KPI s
Ability to lead, motivate and mana
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzQzMF9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1133392&xid=1555_430
2y
1
SavedSave
* Responsible for ensuring the smooth operation of our machinery and equipment
* Perform preventative and predictive maintenance, repairs, inspections (assessing the functionality of production
* Perform and complete maintenance work order requests
* Give detailed feedback of work orders, spare parts consumed, and time spent on specific work orders in SAP-EAM daily
* Performs Daily Plant Critical Checks and records results in Inspection Lots in SAP-EAM
* Fabricate items required during maintenance or set-up of equipment
* Read blueprints, diagrams, and schematic drawings to determine work procedures
* Attend to breakdowns in such a manner that there is minimum lost time
* Respond to after hour call-out when required
* Control of spare parts used
* Maintain a clean and orderly work environment (Production plant, equipment and workshop).
* Provides support for a variety of projects by assisting with site preparation, on-site clean up, and evaluation
* Trade test certificate: Millwright
* At least 18 months Mechanical/Electrical/Mechatronics Engineering qualification or PLC; SCADA & Batch Management Software’s certification training program
* Project management training certificates
* 5 years’ experience as a Millwright/Technician maintenance or project environment (preferably in the manufacturing Chemical Industry)
* Computer literacy with working knowledge on Microsoft packages and SAP is essential
* Good verbal communication skills and basic report writing skills are essential
* Strong organizational skills and efficient time management skills are essential
* A sense of urgency (does things quickly and methodically), self-driven and resilient, work with minimal supervision and exercise independent judgment
* In-depth knowledge of mechanical and electrical systems maintenance
* In-depth knowledge in instrumentation and able to do calibrations and verifications
* Ability to interpret PLC software and fault find in PLC software
* Ability to interpret SCADA & Batch Management software and use as a fault-finding tool
* Ability to diagnose, determine cause and effect, and repair equipment malfunctions
* An analytical approach to problem solving and ability to pay high attention to detail as well as handle complexity (multiple challenges simultaneously)
* Shows an open attitude towards change and is willing to adapt to changing priorities, process conditions, and circumstances
* Ability to read and interpreting blueprints, diagrams, schematics, drawings, manuals, and specifications
* Establish and maintain effective work relationships within the department and the company. (Includes ability to handle stress and to interact with others from diverse backgrounds and points of view to establish and maintain a positive and productive work environment and minimize personal conflicts)
* Works in a goal-, result-, and customer-oriented manner. Considers economic aspects (quality, quantity, tim
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzM4OTVfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1135177&xid=1555_3895
2y
1
SavedSave
Assistant Auto ElectricianWell Established Transport company in Port Elizabeth, Deal Party has a vacancy for an assistant Auto ElectricianRequirements:Grade 10 with minimum 6 months experience in auto electrical Only candidates residing in Port Elizabeth, with own reliable transport, and a valid Code 8 license need to applyA stable person with a strong personality and good communication skills A meticulous and disciplined person, able to prioritize tasks and work methodically A healthy individual with sober habitsMust be able to work within the framework as set out by your manager Responsibility:Duties include but not limited to:Diagnosis of electrical errors and repairsIn our building program your will be responsible for the installation and wiring of all electrical equipmentPreventative Maintenance and CampaignsTesting of and early notification to replace faulty batteries on our fleetOur building program has a tight schedule and you must be able to meet the deadlinesYou will participate in a standby schedule to assist drivers on after hours breakdownsComplete the jobcard comprehensively and update the systemWorking hours Mon to Fri 8:00 - 17:00, after hour support Alternating weekends and Public Holidays as per operational requirementsPlease do not send your CV if you dont meet the above criteriaEmail CVs to: vacancies@toanywhere.co.za MUST use REF: ELECTRICAL 1006Job Reference #: ELECTRICAL 1006Consultant Name: Cindy Coetzer
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzM5MDU3X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1126826&xid=1266_39057
2y
1
SavedSave
Our Port Elizabeth client, a leading player in the IT space, with clients in more than 30 countries around the world; is seeking to employ an experienced Full Stack PHP Developer.The appointed candidate will alternate between working from home and working from the office (hybrid staffing model).The Ideal candidate must be able to work well within a team reporting to the development manager, self-motivated, ambitious and have a burning desire to build a world class application.Proficient understanding of code versioning tools:GitHubAngularJS,PHP,Propel,SQL, andAWS Responsibilities:Implementation of new and the maintenance of the current set of services and APIs to power the web applicationBuilding reusable code and libraries for future useOptimization of the application for maximum speed and scalabilityImplementation of security and data protectionTranslation of UI/UX wireframes and documentation into visual elementsIntegration of the front-end and back-end aspects of the web applicationSkills:Proficient knowledge of our technology stack.Extensive and proven experience with an object orientated programming language.Understanding differences between multiple delivery platforms (such as mobile vs, desktop), and optimizing output to match the specific platformCreate clean, maintainable, and scalable codeCreate REST based web services and APIs for consumption by mobile and web platformsData migration, transformation, and scriptingManagement of hosting environment, including database administration and scaling an application to support load changesAbility to implement automated testing platforms and unit testsShould have knowledge of advanced JavaScript libraries and frameworks such as AngularJSProficient understanding of code versioning tools: GitHub, AngularJS, PHP, Propel, SQL, and AWSQualifications / Requirements:Minimum of 3-5 years relevant work experienceA relevant degree would be advantageous, however, is not a requirement
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzM4MTEzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1123505&xid=1266_38113
2y
1
SavedSave
Port Elizabeth - Our client, one of the largest citrus exporters is looking for a qualified and experienced individual to join their team and managing/oversee warehouse operations.Requirements:MatricRelevant Warehouse Management qualification would be advantageousMin 3yrs warehouse management experience is essential in the FMCG/Fresh Food industryValid Drivers Licence with Own CarMS Office literateResponsibilities:Oversee and manage the entire warehouse operationTrain, motivate and supervise a teamFleet maintenance (forklift and pallet jack servicing, repairs and maintenance)Waste removal - Arrange collection of waste and ensure correct documentation is completedSorting and sizing of fruit - oversee the process and ensure it is done correctlyLoads receiving and sending - manage the processHousekeeping of yard and warehouseOversee and assist with Health and Safety and adhere to protocolStrong leadership skillsTeam PlayerAbility to work in a pressurized environmentGood communication skills
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzM1Njc5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1103660&xid=1266_35679
2y
1
SavedSave
Maintenance Technician required for a leading automotive company based in Kariega Applications are invited from suitably qualified & experienced applicants to fill the above vacancy in Production – Body Shop Education & Experience Must have worked extensively within the automotive industry within the past 5 yearsA National Nated Diploma/ National Diploma/ B Tech/B Eng./ B Sc. Degree in Electrical Engineering/ Mechatronics.At least 5 years in vehicle manufacturing maintenance and/or technical environment.Skills, Attributes & Other requirements ESSENTIAL Siemens PLC and robot training would be a distinct advantage.Able to read E-Plan Electrical and Pneumatic drawingsHave a strong analytical, diagnostic capabilities and problem-solving ability.Prepared to undergo and successfully pass an appropriate assessmentWillingness to work shifts, overtime, weekends, public holidays, Plant shut down, whenever necessary and/or required.Willingness to be on Standby rosterWillingness to complete and pass compulsory VASSHave a good attendance record.PREFERRED:German language proficiency advantageous.Job Description and ResponsibilitiesRepair faulty equipment and parts i.e. welding guns, servo-pneumatic valves, transmission modules, tucker guns, sealer equipment to ensure availability of spare parts and equipment (spare part management).Resolve robotic electronic communication faults by adjusting the robotic program to prevent re-occurring robot communication faults and ensure uninterrupted production process.Analyse, fault find, repair and optimise sealer, toxing, welding, laser, bolting and rivet joining technology equipment failure to ensure achievement of quality requirements and efficient production process.Analyse PLC programs to resolve errors and determine root causes of Interbus or Profinet network errors, determine corrective actions to continue with the Production process and ensure uninterrupted Production run.Fault find, set up and program SEW drives by using the appropriate diagnostics software/tools such as Movitools, Motion Studio to ensure uninterrupted Production run.Modify, update and improve diagnostic software on HMI to identify the faulty equipment to facilitate speedy resolution to Production stoppages.Analyse and investigate severe or reoccurring Production stoppages to determine the real root cause of the stoppage and determine the appropriate preventative action and counter measure to ensure that the reoccurring of the fault are eliminated and/or prevented.Contact equipment suppliers and technology experts within Company to enquire regarding solutions to complex equipment problems and failures to ensure pending or reoccurring faults are eliminated or prevented.Document Production stoppages, severe breakdowns, problem sheet, Knowledge Management System, TPM Sheets and PM schedules to ensure all maintenance activities are documented, distributed and knowledge is retained, made available and utilised to prevent future stoppages or breakdowns.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzE4NDU4NV9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1781013&xid=1109_184585
2d
1
SavedSave
We are seeking a Trade Tested Fitter with injection moulding experience within the automotive sector.Requirements: Minimum 3 to 5 years’ experience within plastic injection mouldingInjection or blow moulding experience is a mustMust have experience within automotive sectorSound experience in fault finding and preventative maintenanceTurning and Milling experienceMust be able to work under pressureAbility to work without direct supervisionReliable transport
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5Xzg1OTY1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1216919&xid=1109_85965
2y
1
SavedSave
Job Position: Qualified ElectricianRef: 3936Location: Port Elizabeth Salary: R23 000 to R29 000 per month commensurate with experience and qualification Email your updated CV to recruit@onlinepersonnel.co.zaQualifications / Requirements:• Qualified Trade Tested Electrician• Minimum of 5 years’ post trade test experience in a manufacturing environment• Must have general electrical experience as well as PLC experience• Must have own reliable transportKey Performance Areas:• Conduct breakdown and preventative maintenance on plant machinery and equipment • Assist in installation and commissioning of new equipment• Perform and sign off on allocated job cards• Test and evaluate equipment for irregularities• Reading and interpreting Electrical drawings for faultfinding purposes• Use the planned maintenance system with reference to the maintenance schedules and shutdown maintenance schedules• Adhere to both industry quality standards and the requirements of ISO 9001• Safety installations and compliance with SANS 10142 is imperative for all installationsResponsibility:Email your updated CV to recruit@onlinepersonnel.co.zaQualifications / Requirements:• Qualified Trade Tested Electrician• Minimum of 5 years’ post trade test experience in a manufacturing environment• Must have general electrical experience as well as PLC experience• Must have own reliable transportKey Performance Areas:• Conduct breakdown and preventative maintenance on plant machinery and equipment • Assist in installation and commissioning of new equipment• Perform and sign off on allocated job cards• Test and evaluate equipment for irregularities• Reading and interpreting Electrical drawings for faultfinding purposes• Use the planned maintenance system with reference to the maintenance schedules and shutdown maintenance schedules• Adhere to both industry quality standards and the requirements of ISO 9001• Safety installations and compliance with SANS 10142 is imperative for all installationsSalary: R23000 to 29000Job Reference #: Qualified Electrician
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzUxMzY5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1193385&xid=1266_51369
2y
1
SavedSave
Job Position: Qualified ElectricianRef: 3936Location: Port Elizabeth Salary: R23 000 to R29 000 per month commensurate with experience and qualification Email your updated CV to recruit@onlinepersonnel.co.zaQualifications / Requirements:• Qualified Trade Tested Electrician• Minimum of 5 years’ post trade test experience in a manufacturing environment• Must have general electrical experience as well as PLC experience• Must have own reliable transportKey Performance Areas:• Conduct breakdown and preventative maintenance on plant machinery and equipment • Assist in installation and commissioning of new equipment• Perform and sign off on allocated job cards• Test and evaluate equipment for irregularities• Reading and interpreting Electrical drawings for faultfinding purposes• Use the planned maintenance system with reference to the maintenance schedules and shutdown maintenance schedules• Adhere to both industry quality standards and the requirements of ISO 9001• Safety installations and compliance with SANS 10142 is imperative for all installationsResponsibility:Email your updated CV to recruit@onlinepersonnel.co.zaQualifications / Requirements:• Qualified Trade Tested Electrician• Minimum of 5 years’ post trade test experience in a manufacturing environment• Must have general electrical experience as well as PLC experience• Must have own reliable transportKey Performance Areas:• Conduct breakdown and preventative maintenance on plant machinery and equipment • Assist in installation and commissioning of new equipment• Perform and sign off on allocated job cards• Test and evaluate equipment for irregularities• Reading and interpreting Electrical drawings for faultfinding purposes• Use the planned maintenance system with reference to the maintenance schedules and shutdown maintenance schedules• Adhere to both industry quality standards and the requirements of ISO 9001• Safety installations and compliance with SANS 10142 is imperative for all installationsSalary: R23000 to 29000Job Reference #: Qualified Electrician
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzUxMzE4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1193342&xid=1266_51318
2y
1
SavedSave
Our US client seeks a Senior Software Tester to join their team on a long term contract basis. This is a work from home role (no office time). Payment in US$. Main purpose of the position: The Senior Software Tester is responsible for a number of key testing aspects within the Development Team. This will be contract employment and a work from home position.Qualifications/ Experience: BSc or equivalent Degree.SYSPRO ERP Experience preferred.WMS Experience preferred.Crystal Report Experience preferred.Software Testing Experience.Key Skills: C# Development experience.Microsoft SQL Server Experience.Excellent communication skills.Structured problem solving skills.Confident and Self Motivated.Responsibilities: Daily Ticket Testing on the Azure DevOps portal.Monitoring of daily Automated Testing cycles with updates as needed.Writing of coded UI tests for Regression Testing.Direct communication with the developers on Defects and Tickets.Maintenance of the automated Test Environment and Software.Software Release Notes compilation and management.The successful candidate will report to the CEO. If you are not contacted within two weeks of applying, please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzU3NTQ2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1210984&xid=1108_57546
2y
1
Maintenance Engineer (Temporary Position) required for a large Automotive company based in Gqeberha, Eastern Cape General Overview: Plan & execute maintenance activities for all Paint shop facilities and equipment.Essential Requirements Degree / National Diploma / NN Diploma in Mechanical engineering and Mechatronics (Dual trade will be advantage)Understanding of Paint Shop technical processes in order to support and drive creation and implementation of new initiatives.Minimum 5 -7 years’ relevant experience in an industrial/automotive environment (Paint plant will be an advantage)Analytical and problem-solving skills combined with sound knowledge of project management principles and practices.Sound technical knowledge of PLC controlled systems, instrumentation, pneumatics & hydraulics, conveyors, pumps, LPG burners, boilers and experience in prevention and predictive maintenance.Excellent presentation and communication skills with all levels in the Company (written or verbal)Computer literate in MS Office (Excel, PowerPoint, Word, SAP, MS projects)Ability to take initiative, be a self-starter; work independently and within a team environmentHave a good attendance record.Be prepared weekends and unplanned overtime.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzU3MzMwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1210473&xid=1108_57330
2y
Save this search and get notified
when new items are posted!
