Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for fitter turner jobs in Jobs in South Africa
1
Our client within the manufacturing industry is seeking an experienced Fitter and Turner to join their team in the Northern Suburbs.
Requirements:
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driverâ??s license with own reliable transport.
Responsibilities:
Breakdowns:
Responsible to attend all breakdowns on machines.
Monitor, report, and amend all stock and non / stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of all service history information.
Preventative Maintenance
:Responsible for all Chain CU Jigs, R&D Testing & Zinc Plating.
Responsible to utilize breakdown service & inspection data to motivate improvements on all above-mentioned production lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all responsible production lines.
Responsible for continuous improvement on maintenance procedures and checklists.
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all relevant production lines.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all responsible machinery and components.
Liaise with Projects Engineer on commissioning of all new responsible machinery and components.
Responsible for innovation and improvement of all responsible machinery and components
Responsible to interact with R&D, Design, and contractors on testing phases of all responsible machinery and components.
 To apply, please forward your CV to hannah@personastaff.co.za.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004804/H&source=gumtree
9h
1
SavedSave
Our client, in the manufacturing industry based in the Northern Suburbs is seeking a suitably qualified and experienced Fitter and Turner.
Requirements:
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
A valid driverâ??s license with own reliable transport.
Responsibilities:
Â
Breakdowns:
Responsible to attend all breakdowns on all machines.
Monitor, report, and amend all stock and non / stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of all Induction ovens & temper furnaces service history information.
Liaise with Induction Coil Specialist and Induction Generator Specialist on any breakdowns regarding all Induction ovens & temper furnaces and commissioning thereof.
Preventative Maintenance
:Responsible for all Induction ovens & temper furnaces standardization per production unit.
Responsible to utilize breakdown service & inspection data to motivate improvements on all Induction ovens & temper furnaces lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all Induction ovens & temper furnaces
Responsible for continuous improvement on maintenance procedures and checklists
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all Induction ovens & temper furnaces.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all Induction ovens & temper furnaces.
Liaise with Projects Engineer on commissioning of all new Induction ovens & temper furnaces.
Responsible for innovation and improvement of all Induction ovens & temper furnaces
Responsible to interact with R&D, Design, and contractors on testing phases of all Induction ovens & temper furnaces machines.
To apply, please forward your CV to hannah@personastaff.co.za.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004802/H&source=gumtree
9h
1
A well-established Manufacturing Engineering company is looking for a ‘’Senior Fitter & Turner’’ to join their team on a full-time permanent basis in the Northern Suburbs, Cape Town.Very good salary on offer (subject to background and experiences) plus internal career advancement opportunities. Position Requirements:• Grade 12 / National Senior Certificate• Minimum N3 Engineering Studies Qualification (N6 Qualification in Engineering Studies preferred)• Section 13 Fitter and Turner Trade Test Certificate• At least 3 years of experience as a qualified Fitter and Turner in a manufacturing setting• Energetic, proactive, and capable of working under pressure• Valid driver’s license with own reliable transportationPosition Responsibilities:• Proficiency in Preventative Maintenance Routines• Competence in Welding, Milling, and Turning• Familiarity with Pneumatics and Hydraulics• Experience with Gearboxes, Water Systems, and Cooling Towers• Basic Electrical Skills• Ability to perform Bearing and Shaft Changing• Aptitude in Fault Finding and Diagnosis• Knowledge of Lubrication techniquesApplying for Position:Only open to South African citizens.If you are interested in this great career opportunity, please send your CV to: jane@hrtalentpartner.co.za and jane.hrtalentpartner@gmail.com
14h
Company based in Sunnyrock, Germiston urgently needs a CNC Mill, Lathe - CAD/CAM Trainer & Applications Engineer.
TheÂ
compulsory
 skill set must be:
Â
-Knowledge of CNC Mill & Lathe (Programming & Operating)
-Experience in EDGECAM or Mastercam or Solidworks
-Available for Saturday Training (2 Saturdays a month)
Job Summary:
 As an Applications Engineer & Training Facilitator for CAD CAM (Computer-Aided Design/Computer-Aided Manufacturing) software and Metrology equipment, your primary responsibility will be to provide technical expertise, application support, and training to customers and internal teams. You will play a crucial role in ensuring the successful implementation and utilization of CAD CAM and Metrology equipment & software solutions. This position requires a strong background in engineering, CAD CAM software, and exceptional problem-solving and communication skills.
Qualifications:
Qualified Toolmaker / Fitter and Turner (advantageous)Proven experience as a CNC Machinist with expertise in both milling and lathe operations.Proficiency in programming CNC machines using CAM software and G-code.Experience in using EDGECAM / MASTERCAM / SOLIDWORKS.Strong knowledge of CNC machining principles, tooling, and materials.Excellent communication and presentation skills.Ability to adapt training methods to accommodate diverse learning styles.Patient and approachable demeanor with a passion for educating others.Physical Requirements:
Ability to demonstrate and supervise hands-on training activities.Comfortable working in a machine shop environment.Application Support:
Provide prompt and accurate technical support to customers and internal teams via various channels (e.g., phone, email, chat).Troubleshoot and resolve software-related issues, conducting in-depth investigations when necessary.Collaborate with software development teams to escalate and resolve complex technical issues.Responsibilities:
Training Program Development:
Design and develop comprehensive training programs for CNC milling and lathe operations.Create instructional materials, presentations, and hands-on exercises to facilitate effective learning.Classroom Instruction:
Conduct theoretical classroom training sessions covering CNC & CAD/CAM machining principles, programming, and safety procedures.Use multimedia tools and resources to enhance the learning experience.Assess and adjust instructional methods based on the needs of individual trainees.Hands-On Training:
Coordinate and conduct practical, hands-on training sessions on CNC milling and lathe machines.Guide trainees in machine setup, tooling, programming, and troubleshooting.Provide real-world examples and scenarios to reinforce practical skills.Skill Assessment:
Evaluate trainee performance through practical assessments and written examinations.Provide constructive feedback to help individuals improve their skills.Curriculum Enhancement:
Stay current with industry advancements in CNC machining technology.Update tr
SECTOR: Manufacturing
Job Reference #: JHB000341/AH
1d
1
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements:
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Responsibilities:
Attend to all breakdowns promptly across various production machines.
Monitor and manage stock levels of critical spare parts in the Stores & Maintenance department.
Provide detailed reports to Maintenance & Production regarding repair progress and fault diagnosis.
Record downtime duration on maintenance job cards for analysis.
Maintain comprehensive service history records for all equipment.
Conduct preventative maintenance on Chain CU Jigs, R&D Testing, and Zinc Plating lines.
Utilize breakdown and inspection data to drive improvements across production lines.
Investigate and report unforeseen limitations or stoppages during planned services.
Perform regular weekly, monthly, and yearly services on designated production lines.
Continuously improve maintenance procedures and checklists.
Collaborate with the maintenance department to implement changes and improvements following breakdown investigations.
Monitor and report on the condition of machine components.
Provide feedback to the Design department for improvements and address issues on relevant production lines.
Ensure availability and functionality of necessary tools and equipment.
Report any deviations from original designs and collaborate with Projects Engineer for commissioning of new machinery.
Drive innovation and improvement in machinery and components.
Collaborate with R&D, Design, and contractors during testing phases.
Please forward your CV to craig@personastaff.co.za and indicate your salary expectations.
Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant.
megan@personastaff.co.za
2d
1
To ensure that all moulds and tools are processed through the tool room timeously and to a standard that will allow them to be run by production with minimal rejects.
Requirements:
Must be in possession of a Grade 12 School Leaving CertificateMust be a Trade Tested Toolmaker or Fitter/Turner MachinistThe Candidate must have sound knowledge of Pneumatics, welding, turning, milling and preferably CNC experience5 years working experience in an Automotive Manufacturing environment.
Responsibilities:
Ensuring that tools/moulds made in the Toolroom comply with ALL stipulated requirements.Ensure that tooling projects are completed within set timing constraints by clearly defined instructions and monitoring of staff.Planning for resource and material requirements.Staying within set budget parameters for tools/moulds. Tool/Mould MaintenanceMaintain and Repair all Tooling/Moulds used in the group so as to ensure minimal rejects or foam wastage.Develop new tooling or modify existing tooling when requiredDiagnose and repair faults on tooling during the production runManufacture basic tooling and production tooling to drawing or sample partMove, lift, lower and look after tooling Process/Productivity ImprovementsIdentify areas for improvement on Tool/Mould design and manufacture with a reduction in rejects and shortened lead time as the end result. FabricationDevelop and fabricate from complex drawingsMechanically cut, drill and punch fabrication materialsJoin metals using the resistance welding process, Weld work piece (oxy-acetylene welding, shielded metal arc welding, gas metal arc welding, gas tungsten arc welding)Remove metals using oxy-fuel and air-carbon arc gouging processesEnsure all equipment/machine tools are maintained and that tool room housekeeping is of a high standard at all times Maintenance Process (Scheduled)Receive Maintenance Schedules, interpret instructions and plan maintenance and repair workInspect the tooling and determine spares and consumables requirementsGenerate Job Requisitions for scheduled maintenance work (type of repair or maintenance, spares, quantities, time, etc.)Transport tools, equipment and spares to the work siteIsolate equipment, perform lockouts and make the work area safeConduct Preventive Maintenance activitiesPerform change overs in the production environmentPerform routine maintenanceAlign machines and equipmentDiagnose and repair faults on equipment and machinery during production/operationCommission and refurbish machines / equipmentOperate and monitor a drilling machine to produce componentsOperate and monitor a lathe to produce ...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xOTE3MjI3MDkzP3NvdXJjZT1ndW10cmVl&jid=1750638&xid=1917227093
2d
1
SavedSave
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Boilermaker with Fabrication Experience.
REQUIREMENTS:
Grade 12 / National Senior Certificate
Fitter and Turner Trade Test Certificate
Minimum of 2 years’ experience as a qualified Fitter and Turner in a manufacturing environment
Energetic, proactive and able to work under pressure
A valid driver’s license with own reliable transport
Skills and Knowledge Required
·Admin: Complete all Fabrication Request feedback paperwork. Complete MJR’s. Compile SOW and BOM for small FR. Complete all TSIS and H&S paperwork.
·Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
·Welding – Mig, Tig and Arc
·Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
·Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
·Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
·Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
·Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
. Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
·Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
·Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
2d
1
SavedSave
Oversee Fitters and Turners, Seamer Technicians, and boiler making and manufacturingEngineering warehouse and procurementEngineering planning (preventative maintenance schedules)Boiler and steam servicesWater reticulation servicesAir reticulation servicesMobile equipment such as forklifts and utility vehiclesProcessing machinery, which includes rotary cookers and retorts as well as aseptic sterilizerLabelling department, which includes palletizing, labelling, packagingOversee Electrical and InstrumentationProduction personnelStudent and apprentice mentoring
Minimum Requirements:
Matric or N3 Technical Certificate in Millwrights/Electrical/MechanicalN6 Technical Certificate and/or Degree in Mechanical Engineering will be added an advantage.3 to 6 Years’ experience in both Electrical and Mechanical FieldProven Track record of leading the TeamFitter and Turner Trade certificate or any related Engineering StudiesComputer Literacy (MS Word, Excel, Outlook)Strong knowledge of Seamers will be added as an advantageLabelling Machine BackgroundSteam Boiler knowledgeFood Processing Equipment experience will be advantageousCan Food Processing Equipment (CFPE) experienceWilling to work in Dzanani- Limpopo
Knowledge and Skills required:
Knowledge of FMCG equipmentGood Leadership SkillsStrong in Electrical Components (PLC)Excellent knowledge of Food Processing EquipmentKnowledge of sterilization equipmentExcellent communication skillsAbility to work under pressureAbility to work as an individual and as a teamTime management skillsNumerical abilitiesPlanning and Organizing skillsGood project management skills
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80MDc0MDMyMzIzP3NvdXJjZT1ndW10cmVl&jid=1312859&xid=4074032323
2d
1
SavedSave
Matric plus N4 (Mechanical Engineering)Completed an apprenticeship in Mechanical Fitting / Fitter & Turner.A recognized Trade Test certificate, Mechanical Fitting / Fitter & Turner.At least 5 to 8 years heavy industrial fitting experience.A good knowledge of hydraulics and pneumatics.A specific knowledge of Front-End Equipment (dewatering mills & carriers).Good fault-finding / problem solving skills.Ability to read and understand drawings and diagrams.A good understanding of the principles and techniques associated with condition based monitoring and modern alignment.Computer literate & conversant with planned maintenance system will be an added advantage.Sugar Mill experience will be an added advantage.Rigging experience.Turning/Welding
Key Focus Area:
Carry out plant inspections and schedules as per scheduled maintenance manualCarry out maintenance, overhauls gearboxes, pumps, centrifugals, fans, repairs on hydraulic etc.Perform Project work, such as installation of conveyors when required.Carry out fault finding on pneumatic systems.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMzIwMzYzNDY4P3NvdXJjZT1ndW10cmVl&jid=1250263&xid=1320363468
2d
1
SavedSave
Oversee Fitters and Turners, Seamer Technicians, and boiler making and manufacturingEngineering warehouse and procurementEngineering planning (preventative maintenance schedules)Boiler and steam servicesWater reticulation servicesAir reticulation servicesMobile equipment such as forklifts and utility vehiclesProcessing machinery, which includes rotary cookers and retorts as well as aseptic sterilizerLabelling department, which includes palletizing, labelling, packagingOversee Electrical and InstrumentationProduction personnelStudent and apprentice mentoring
Minimum Requirements:
Matric or N3 Technical Certificate in Millwrights/Electrical/MechanicalN6 Technical Certificate and/or Degree in Mechanical Engineering will be added an advantage.3 to 6 Years’ experience in both Electrical and Mechanical FieldProven Track record of leading the TeamFitter and Turner Trade certificate or any related Engineering StudiesComputer Literacy (MS Word, Excel, Outlook)Strong knowledge of Seamers will be added as an advantageLabelling Machine BackgroundSteam Boiler knowledgeFood Processing Equipment experience will be advantageousCan Food Processing Equipment (CFPE) experienceWilling to work in Dzanani- Limpopo
Knowledge and Skills required:
Knowledge of FMCG equipmentGood Leadership SkillsStrong in Electrical Components (PLC)Excellent knowledge of Food Processing EquipmentKnowledge of sterilization equipmentExcellent communication skillsAbility to work under pressureAbility to work as an individual and as a teamTime management skillsNumerical abilitiesPlanning and Organizing skillsGood project management skills
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yOTgwMDAyNjEwP3NvdXJjZT1ndW10cmVl&jid=1312858&xid=2980002610
2d
1
SavedSave
Fitter & Turner
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements:
• Grade 12 / National Senior Certificate.
• Section 13 Fitter and Turner Trade Test Certificate.
• 3 - 5 years post trade experience.
• Experience within a manufacturing environment (beneficial).
• Energetic, proactive and able to work under pressure.
• A valid driver’s license with own reliable transport.
Skills and Knowledge Required:
•Preventative Maintenance Routines.
•Welding (Mig Tig & Arc), Milling, and Turning.
•Planning - Check that all part complies with procurement register and data pack. (Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
•Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
•Drilling and/or slotting holes: Proper use of hand drill, Mag base drill, machining machine, etc.
•Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc. (Prep for next phase)
•Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack. (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
•Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
•Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
•Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
•Pneumatics and Hydraulics.
•Gearboxes.
•Water Systems and Cooling Towers.
•Basic Electrical Experience.
•Bearing and Shaft Changing.
•Fault Finding and Diagnosis.
•Lubrication.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
2d
1
SavedSave
Fitter and Turner.
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Skills and Knowledge Required
Preventative Maintenance Routines.
Welding (Mig Tig & Arc), Milling, and Turning.
Planning - Check that all part complies with procurement register and data pack.(Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
Drilling and/or slotting holes: Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Pneumatics and Hydraulics.
Gearboxes.
Water Systems and Cooling Towers.
Basic Electrical Experience.
Bearing and Shaft Changing.
Fault Finding and Diagnosis.
Lubrication.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Consultant Name: Megan Ockhuis
2d
1
Fitter & Turner (R&D Testing Artisan)
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible to attend all breakdowns on machines.
Monitor, report, and amend all stock and non / stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of all service history information.
Preventative Maintenance
:Responsible for all Chain CU Jigs, R&D Testing & Zinc Plating.
Responsible to utilize breakdown service & inspection data to motivate improvements on all above-mentioned production lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all responsible production lines.
Responsible for continuous improvement on maintenance procedures and checklists.
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all relevant production lines.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all responsible machinery and components.
Liaise with Projects Engineer on commissioning of all new responsible machinery and components.
Responsible for innovation and improvement of all responsible machinery and components
Responsible to interact with R&D, Design, and contractors on testing phases of all responsible machinery and components.
Please forward your CV to megan@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Inform
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004763/MM&source=gumtree
2d
1
SavedSave
Senior Fitter & Turner (Maintenance)
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner in their Maintenace division.
Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible to attend all breakdowns on all machines.
Monitor, report, and amend all stock and non / stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of all Induction ovens & temper furnaces service history information.
Liaise with Induction Coil Specialist and Induction Generator Specialist on any breakdowns regarding all Induction ovens & temper furnaces and commissioning thereof.
Preventative Maintenance
:Responsible for all Induction ovens & temper furnaces standardization per production unit.
Responsible to utilize breakdown service & inspection data to motivate improvements on all Induction ovens & temper furnaces lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all Induction ovens & temper furnaces
Responsible for continuous improvement on maintenance procedures and checklists
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all Induction ovens & temper furnaces.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all Induction ovens & temper furnaces.
Liaise with Projects Engineer on commissioning of all new Induction ovens & temper furnaces.
Responsible for innovation and improvement of all Induction ovens & temper furnaces
Responsible to interact with R&D, Design, and contractors on testing phases of all Induction ovens & temper furnaces machines.
Please forward your CV to megan@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected accor
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004781/MM&source=gumtree
2d
1
Fitter & Turner (R&D Testing Artisan)
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible to attend all breakdowns on machines.
Monitor, report, and amend all stock and non / stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of all service history information.
Preventative Maintenance
:Responsible for all Chain CU Jigs, R&D Testing & Zinc Plating.
Responsible to utilize breakdown service & inspection data to motivate improvements on all above-mentioned production lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all responsible production lines.
Responsible for continuous improvement on maintenance procedures and checklists.
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all relevant production lines.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all responsible machinery and components.
Liaise with Projects Engineer on commissioning of all new responsible machinery and components.
Responsible for innovation and improvement of all responsible machinery and components
Responsible to interact with R&D, Design, and contractors on testing phases of all responsible machinery and components.
Please forward your CV to natasha@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Person
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004787/N&source=gumtree
2d
1
SavedSave
Senior Fitter & Turner (Maintenance)
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner in their Maintenace division.
Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible to attend all breakdowns on all machines.
Monitor, report, and amend all stock and non / stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of all Induction ovens & temper furnaces service history information.
Liaise with Induction Coil Specialist and Induction Generator Specialist on any breakdowns regarding all Induction ovens & temper furnaces and commissioning thereof.
Preventative Maintenance
:Responsible for all Induction ovens & temper furnaces standardization per production unit.
Responsible to utilize breakdown service & inspection data to motivate improvements on all Induction ovens & temper furnaces lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all Induction ovens & temper furnaces
Responsible for continuous improvement on maintenance procedures and checklists
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all Induction ovens & temper furnaces.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all Induction ovens & temper furnaces.
Liaise with Projects Engineer on commissioning of all new Induction ovens & temper furnaces.
Responsible for innovation and improvement of all Induction ovens & temper furnaces
Responsible to interact with R&D, Design, and contractors on testing phases of all Induction ovens & temper furnaces machines.
Please forward your CV to natasha@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protec
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004784/N&source=gumtree
2d
1
Fitter & Turner (R&D Testing Artisan)
An internationally established Manufacturing company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible for attending all breakdowns on machines.
Monitor, report, and amend all stock and nonstock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to the progress of repairs and diagnosis of faults.
Report on the duration of downtime on the maintenance job card.
Responsible for tracking and upkeep of all service history information.
Preventative Maintenance
:Responsible for all Chain CU Jigs, R&D Testing & Zinc Plating.
Responsible for utilizing breakdown service & inspection data to motivate improvements on all above-mentioned production lines.
Responsible for reporting & investigating unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all responsible production lines.
Responsible for continuous improvement on maintenance procedures and checklists.
Responsible for interacting with the maintenance department relating to any changes, and improvements following investigations on breakdowns, improvements on downtime etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to the Design department relating to improvements & issues on all relevant production lines.
Responsible for ensuring all necessary tools & equipment are available and in working condition.
Responsible for reporting any deviations to original as-built drawings/designs on all responsible machinery and components.
Liaise with the Projects Engineer on the commissioning of all new responsible machinery and components.
Responsible for innovation and improvement of all responsible machinery and components
Responsible for interacting with R&D, Design, and contractors on testing phases of all responsible machinery and components.
Please forward your CV to liza-nelle@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. I
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004790/LN&source=gumtree
2d
1
SavedSave
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements:
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Skills and Knowledge Required:
. Preventative Maintenance Routines.
. Welding (Mig Tig & Arc), Milling, and Turning.
. Planning - Check that all part complies with procurement register and data pack. .... (Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
. Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
. Drilling and/or slotting holes: Proper use of hand drill, Mag base drill, machining machine, etc.
. Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc. (Prep for next phase)
. Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack. (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
. Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
. Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
. Pneumatics and Hydraulics.
. Gearboxes.
. Water Systems and Cooling Towers.
. Basic Electrical Experience.
. Bearing and Shaft Changing.
. Fault Finding and Diagnosis.
. Lubrication.
Please forward your CV to reception@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
reception@personastaff.co.za
2d
1
SavedSave
Senior Fitter & Turner (Maintenance)
An internationally established manufacturing company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner in their maintenance division.
Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible to attend all breakdowns on all machines.
Monitor, report, and amend all stock and non / or stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to the progress of repairs and diagnosis of faults.
Report on the duration of downtime on the maintenance job card.
Responsible for tracking and upkeep of all Induction ovens & temper furnaces service history information.
Liaise with Induction Coil Specialist and Induction Generator Specialist on any breakdowns regarding all Induction ovens & temper furnaces and commissioning thereof.
Preventative Maintenance
:Responsible for all Induction ovens & temper furnaces standardization per production unit.
Responsible to utilize breakdown service & inspection data to motivate improvements on all Induction ovens & temper furnace lines.
Responsible for reporting & investigating unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all Induction ovens & temper furnaces
Responsible for continuous improvement of maintenance procedures and checklists
Responsible for interacting with the maintenance department relating to any changes, and improvements following investigations on breakdowns, improvements on downtime etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to the Design department relating to improvements & issues on all Induction ovens & temper furnaces.
Responsible for ensuring all necessary tools & equipment are available and in working condition.
Responsible for reporting any deviations to original as-built drawings/designs on all Induction ovens & temper furnaces.
Liaise with the Projects Engineer on the commissioning of all new Induction ovens & temper furnaces.
Responsible for innovation and improvement of all Induction ovens & temper furnaces
Responsible for interacting with R&D, Design, and contractors on testing phases of all Induction ovens & temper furnaces machines.
Please forward your CV to liza-nelle@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004796/LN&source=gumtree
2d
1
SavedSave
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner in their maintenance division.
Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
A valid driver’s license with own reliable transport.
Responsibilities
Attend to breakdowns promptly across all machines, ensuring minimal downtime.
Monitor and manage stock levels of critical spare parts in the Stores & Maintenance department.
Provide regular reports to Maintenance & Production on repair progress and fault diagnosis.
Record downtime duration on maintenance job cards for analysis.
Maintain service history records for all Induction ovens & temper furnaces.
Collaborate with specialists for breakdowns and commissioning of equipment.
Standardize and improve maintenance procedures for production units.
Utilize breakdown data for continuous improvement of equipment performance.
Conduct weekly, monthly, and yearly services on equipment.
Enhance maintenance procedures and checklists through continuous improvement.
Provide feedback to the Design department for equipment improvements.
Ensure availability and functionality of necessary tools and equipment.
Report any deviations from original designs and liaise with Projects Engineer for commissioning of new equipment.
Drive innovation and improvement in equipment performance.
Collaborate with R&D, Design, and contractors during testing phases
Please forward your CV to craig@personastaff.co.za
and indicate your salary expectations.Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004793/CS&source=gumtree
2d
Save this search and get notified
when new items are posted!