Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for Engineering & Architecture jobs in Despatch in Despatch
1
1
1
1
Primary Responsibilities:Health, Safety, Environmental & Quality Compliance:Implement and maintain the companys SHERQ management systems across all depots.Provide guidance and support to appointed 16(2) and 8(2) responsible persons to ensure ongoing legal and operational compliance.Conduct regular site inspections and intervene where unsafe acts or conditions are identified.Audits and Inspections:Plan, conduct and coordinate internal and external SHERQ audits across depots.Audit HSE compliance, driver, vehicle and safety files against legislative and company requirements.Prepare sites, documentation and employees for audits and inspections.Communicate audit findings, agree corrective actions and track close-out.Policies, Procedures and Documentation:Assist the SHEQ Manager with drafting, reviewing and updating SHERQ policies, procedures, risk assessments and safe operating procedures.Ensure documents are reviewed following incidents, audits or changes to operations and aligned to best practice.Incident Management and Investigations:Investigate incidents, near misses and unsafe conditions and identify root causes.Assign, review and submit incident investigations for approval.Assist managers and investigators with corrective actions and Lessons Learnt communications.Training, Communication and Safety Culture:Conduct inductions, toolbox talks and internal safety training.Coordinate and schedule external training for drivers and relevant staff.Promote a positive safety culture through regular engagement with employees and contractors.Chair safety committee meetings and address concerns raised across all depots.Environmental and Regulatory Compliance:Initiate and monitor environmental actions to protect employee health and the environment.Implement preventative measures as per environmental assessments and expert recommendations.Represent the company during Department of Labour visits and inspections, including preparation and staff support.Contractor and Service Provider Management:Draft project-specific health and safety specifications and baseline risk assessments for contractors.Pre-vet, approve and audit contractor safety files.Conduct ongoing contractor audits and ensure corrective actions are implemented.Reporting and Performance Monitoring:Monitor and manage SHERQ key performance indicators (KPIs).Compile and submit required reports to professional and regulatory bodies, including RTMS.Identify non-compliance trends and drive corrective actions.Requirements:National Diploma or Degree in Safety Management, Environmental Management, Occupational Heal
https://www.jobplacements.com/Jobs/H/HSSE-Officer-1269322-Job-Search-03-06-2026-04-35-18-AM.asp?sid=gumtree
21d
Job Placements
1
Key ResponsibilitiesWelding Duties:Perform high-quality MIG and TIG welding on aluminium plate and extrusions.Measure, cut, and prepare materials accurately in line with design specifications.Read and interpret design drawings to ensure precise execution of welding tasks.Work in accordance with production schedules and project deadlines.Apply knowledge of welding procedures specific to 5083 Aluminium.Health and Safety:Adhere strictly to all company health and safety protocols.Consistently wear and maintain required Personal Protective Equipment (PPE).Report any defective welds, tools, or equipment that may pose safety risks.Keep work areas, including welding bays, bathrooms, and eating areas, clean and well-maintained.Ensure all tools, chemicals, and materials are stored safely at the end of each shift.Maintain unobstructed emergency exits at all times.Administration:File design drawings securely after use.Accurately record time and attendance and submit documentation to supervisors as required.Comply with all internal HR and production reporting procedures.Personal AttributesPositive, self-motivated, and health-conscious.Methodical, detail-oriented, and technically minded.Energetic, analytical, and a proactive problem solver.A strong team player with professional work habits.Sober, safety-focused, and dependable.Experience and QualificationsMinimum 2 years of direct experience in MIG and TIG welding.Certification or qualification in MIG/TIG Aluminium Welding (or equivalent).Strong communication skills (verbal and written).Proven ability to work safely and efficiently in a manufacturing environment.Sound knowledge of HSE compliance and manufacturing standards.Physical RequirementsCandidates must be physically capable of meeting the demands of this role, including:Walking moderate distances throughout the workday.Safely climbing ladders when required.Lifting, pulling, and pushing heavy materials or equipment.Working comfortably in confined spaces.Setting up and managing welding equipment and related tools.Adapting to varied physical tasks within a busy production environment.
https://www.jobplacements.com/Jobs/A/Aluminium-Welders-1269347-Job-Search-03-06-2026-04-39-52-AM.asp?sid=gumtree
21d
Job Placements
1
1
Key Responsibilities:Flatting and maskingPrepping cabs for paintStrip and assemblyPolishingAssisting with panel beating workGeneral spray painting preparationRequirements:Experience in any of the above areasPractical knowledge of panel shop processesAbility to work independently and as part of a teamStrong attention to detailGood work ethic and reliabilityNo formal qualifications required experience and skill are what matter most!If you have hands-on experience and take pride in quality workmanship, wed love to hear from you.
https://www.jobplacements.com/Jobs/A/Assistant-PanelbeaterSpray-Painter-1268132-Job-Search-03-03-2026-10-36-57-AM.asp?sid=gumtree
23d
Job Placements
1
The purpose of this Position:To maintain, service, and repair all electric and internal combustion (IC) powered material handling equipment, including reach stackers, empty container handlers, and forklifts ranging from 2-ton to 32-ton capacity. Perform fault finding and repairs, either on-site or in-house, promptly and cost-effectively to meet customer and company requirements. Maintain vehicle repair records and complete all associated tasks.Key Performance Areas:Service material handling equipment: Maintain forklift servicing to specified standards and procedures, delivering high-quality service and maintenance.Diagnose and troubleshoot equipment breakdowns: Accurately identify issues, communicate necessary repairs to the designated workshop foremen, and provide repair quotations/cost estimates.Maintain vehicle/component records: Keep accurate maintenance and repair data/history, ensuring timely updates and communication for record-keeping purposes.Facilitate effective communication: Ensure clear communication between yourself, the manager, and other staff members.Comply with safety standards: Meet OHSACT and ASEC requirements in all actions on company premises, maintaining a safe work environment by verifying safety device operations and adhering to standards, procedures, and legal regulations.Update job knowledge: Participate in educational opportunities to stay current in the field.Perform critical checks: Monitor FMX reports, speed settings, MSWL, and ensure servicing is completed as per agreements.Must have requirements:Qualified Diesel and/or Petrol Mechanic: With experience in forklifts or similar material handling equipment; or Qualified Forklift Mechanic with expertise in heavy lift equipment.Minimum of 5 years experience in Heavy lift Equipment.Comprehensive understanding of auto electrical systems: Including ignition, starting, charging, and illumination.Strong work ethic: Demonstrates honesty, reliability, hard work, dedication, and takes pride in their work.Effective prioritization and multitasking: Shows a strong sense of urgency, with excellent problem-solving and decision-making abilities.Code 08 Drivers LicenseValid forklift operator licenseSuperior communication skills: Capable of communicating effectively with individuals at all levels within the organization.
https://www.jobplacements.com/Jobs/H/Heavylift-Technician-1267017-Job-Search-2-28-2026-8-42-33-AM.asp?sid=gumtree
1mo
Job Placements
1
1
1
1
Basic Requirements:Formal Tertiary education National Qualification Mechanical Eng./Mechatronics/Electrical Eng.Drivers Licence Code 8- requiredLanguages English read, write & speakAfrikaans read, write & speak (optional)German read, write & speak (optional) Experience:Sales & Marketing experienceProject management experience (advantageous)Experience in automation field, PLC & control systemsConcept preparation (electrical, software, mechanical)Interpretation of mechanical & electrical drawingsCosting & estimation experiencePrevious experience in turnkey projects (advantageous) Job Objectives:Develop innovative solutions & quotations based on customer requirementsConverting quotations to orders based on technical & commercial negotiations with potential customers Main Tasks and Responsibilities:Translating customer requirements into highly specified project briefsIdentifying options for potential solutions & assessing them for both technical & business suitabilityCreating logical & innovative solutions to complex problemsPresenting proposals to clientsWorking closely with engineers & programmers & a variety of suppliers to ensure technical compatibility of solutionsInterpret & develop machine/assembly processes based on customer requirementsGenerating costing spreadsheets & calculating final selling price of solutionsPresent solutions to internal departments including the handing over of all documentation & informationServe as point of contact for non-routine technical issues for major customersMaintain & improve customer relations Preference will be given to employees from the designated groups in line with the provisions of the Employment Equity Act, No. 55 of 1998Jendamark Automation reserves the right not to make an appointment. Applications will not qualify the applicant to an interview or appointment, as only shortlisted candidates will be contacted for interviews. Please kindly consider your application unsuccessful if not contacted three weeks after submission/closing date.
https://www.jobplacements.com/Jobs/P/Project-Sales-Engineer-1266477-Job-Search-2-26-2026-8-51-49-AM.asp?sid=gumtree
1mo
Job Placements
1
REQUIREMENTS:Trade tested Millwright with at least 3 years after trade test experienceCompleted Robot programming courseExperience in Electrical and Pneumatic and Hydraulics with PLC experience and programmingPLC fault finding and ability to read and understand Electrical and Hydraulic drawingsRESPONSIBILITIES:Main purpose of the role is to work within and maintain the electrical and mechanical functional areasAssist with projects.Identify problems on Machines/ Robots (Electrical & Hydraulic & Pneumatic)Provide repair or improvement suggestions to the Maintenance Manager/ SupervisorObtain go-ahead from the Maintenance Manager/Supervisor for improvements and the implement improvementsConduct daily preventative maintenance inspections and checks as per routineConduct repairs according to planned schedule and machine availabilityMonitor machines and equipment for preventative maintenanceIdentify cause of the breakdown & fil in breakdown log sheetRepair breakdownsFull report documented,(job card, plant status board, breakdown history)Perform line QRCI on breakdowns and support UAP QRCIPerform services according to scheduled service plan (3/4 level maintenance)Adhere to FES requirements and standardsEnsure HSE are at all times adhered to
https://www.jobplacements.com/Jobs/M/Millwright-1266294-Job-Search-02-26-2026-03-00-19-AM.asp?sid=gumtree
1mo
Job Placements
1
As a Documentation Assistant, you will play a crucial role in supporting our Repair Project Managers (PPCs) to ensure the successful execution of repair projects. You will assist in tracking parts, maintaining documentation, and coordinating communication with vendors and internal teams. Key Responsibilities:Track parts required for repair Works orders, ensuring that due dates are known to enhance project scheduling accuracy.Create purchase requisitionAssist with compiling Project Parts ListsPrint drawings, procedures and compile work pack as needed.Update and revise routers in the ERP System based on WO requirements.Enter and update BOM (Bill of Materials) in ERP system.Support communication with vendors, suppliers and Certifying Authority (CA) as required.Monitor status of production and OSV work scopes. Identify any issues that may impact our ability to deliver on time and/or on budget.Assist with creating Databook Compilation within a DMS.Coordinate work scopes / Quality Plans with all applicable parties.QUALIFICATIONS: Senior certificate. National Diploma in Electrical or Mechanical EngineeringEXPERIENCE: Experience in Manufacturing/Repair environment preferred.Skills and Competencies:Proficiency in Microsoft Office Suite, especially Excel (intermediate to advanced level preferred).Knowledge of relevant systems (e.g., Tracker, RigOffice, Team Centre, ERP).Ability to interpret schematics, drawings, and Bills of Materials.Excellent administrative skills, with a strong attention to detail.Goal-driven with good interpersonal skills and the ability to work independently.Print drawingsCompile routers via ERPCompile Production PackagesÂ
https://www.jobplacements.com/Jobs/D/Documentation-Assistant-Engineering-1266201-Job-Search-02-25-2026-10-40-26-AM.asp?sid=gumtree
1mo
Job Placements
1
Basic Requirements:Formal Schooling/Degree:Mechanical Engineering / Electrical Engineering / MechatronicsQualified ArtisanProject Management degree advantageousLanguages:English (speak, read, write)Afrikaans (speak, read, write)German (Advantageous)Drivers License: Code 08 required Skills:Computer Literate (MS Office)Good communicationOrganizational skills Experience in Project Management Environment: Project lifecycle planning Resource allocation and management Control and analysis reporting Financially literate with a proven track record in: Budget Monitoring Control and Analysis Job Objectives:To work within the Projects department team, as a Project Manager:To successfully manage and co-ordinate the process of operations from when the orders are received from customers, to obtaining full project sign-off and payment by the customer for such orders. Managing risks, ensuring project as well as payment milestones are met, while maintaining a good customer relationship. Main Tasks and Responsibilities: Technical / Project Risk:o Liaise with project sales department in establishing cost and time effective concepts for customer beneficial use.o Establish full understanding of the scope of work on project inception.o Obtain all the customers requirements for the order received.o Assess the feasibility of requirement for the order received.o Continually liaise with customer ensuring project requirements e.g., technical specifications, drawings, etc. are made available timeously, as well as supplying updated project status reports. Project Milestones:o Establish a project plan, accommodating the financial and timing constraints supporting order requirements.o Determine resource requirements for the established project plan.o Liaise with customers to consolidate and finalise the project timing and delivery arrangements.o Through the duration of the project, any date changes on the project schedule, are to be managed and effected by the Project Manager.o With the support of a structured Project management team (Hods), the Project Manager is to ensure the successful completion of the project, as established and determined by received order.o Chair weekly scope of work meetings, to consolidate project status with project management team. Quality:o Support JQS (Jendamark Quality System).o General Management, supporting the company Code of Conduct and all company policies.o To supporting the wellbeing and the best interests of the company.
https://www.jobplacements.com/Jobs/P/Project-Manager-1265797-Job-Search-2-25-2026-1-08-05-AM.asp?sid=gumtree
1mo
Job Placements
1
Basic Requirements:Formal Tertiary education: Project Management DegreeMechanical / Electrical Engineering / MechatronicsIndustrial Engineering w/t Automotive background. Languages: English (speak, read, write)Afrikaans (speak, read, write)German (Advantageous) Experience: Application experience in the Project Management field (Advantageous)Drivers Licence: Code 8- (required) Job Objectives:To work within the Projects department team, as a Project Graduate Intern:To successfully support assigned Project managers, individually manage and co-ordinate the process of operations from when the orders are received from customers, to obtaining full project sign-off and payment by the customer for such orders. Managing risks, ensuring project as well as payment milestones are met, while maintaining a good customer relationship. Preforming all administrative tasks assigned, in support of meeting Department KPIs. Main Tasks and Responsibilities: Technical/Project Risk:o Liaise with project sales department in establishing cost and time effective concepts for customer beneficial useo Establish full understanding of the scope of work on project inceptiono Obtain all the customers requirements for the order receivedo Assess the feasibility of requirement for the order receivedo Continually liaise with customer ensuring project requirements e.g., technical specifications, drawings, etc. are made available timeously, as well as supplying updated project status reports. Project Milestones:o Establish a project plan, accommodating the financial and timing constraints supporting order requirementso Determine resource requirements for the established project plano Liaise with customers to consolidate and finalise the project timing and delivery arrangementso Through the duration of the project, any date changes on the project schedule, are to be managed and effected by the Project Managero With the support of a structured Project management team (Hods), the Project Manager is to ensure the successful completion of the project, as established and determined by received ordero Chair weekly scope of work meetings, to consolidate project status with project management team. Quality:o Support JQS (Jendamark Quality System)o General Management, supporting the company Code of Conduct and all company policieso To supporting the wellbeing and the best interests of the company. Preference will be given to employees from the designated groups in line with the provisions of the Employment Equity Act, No. 55 of 1998Jendamark Automa
https://www.jobplacements.com/Jobs/G/Graduate-Intern-Project-Management-1205695-Job-Search-7-23-2025-7-36-55-AM.asp?sid=gumtree
8mo
Job Placements
Save this search and get notified
when new items are posted!