Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Suggested
Results for maintenance fitter in Jobs in Western Cape
1
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements:
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Responsibilities:
Attend to all breakdowns promptly across various production machines.
Monitor and manage stock levels of critical spare parts in the Stores & Maintenance department.
Provide detailed reports to Maintenance & Production regarding repair progress and fault diagnosis.
Record downtime duration on maintenance job cards for analysis.
Maintain comprehensive service history records for all equipment.
Conduct preventative maintenance on Chain CU Jigs, R&D Testing, and Zinc Plating lines.
Utilize breakdown and inspection data to drive improvements across production lines.
Investigate and report unforeseen limitations or stoppages during planned services.
Perform regular weekly, monthly, and yearly services on designated production lines.
Continuously improve maintenance procedures and checklists.
Collaborate with the maintenance department to implement changes and improvements following breakdown investigations.
Monitor and report on the condition of machine components.
Provide feedback to the Design department for improvements and address issues on relevant production lines.
Ensure availability and functionality of necessary tools and equipment.
Report any deviations from original designs and collaborate with Projects Engineer for commissioning of new machinery.
Drive innovation and improvement in machinery and components.
Collaborate with R&D, Design, and contractors during testing phases.
Please forward your CV to craig@personastaff.co.za and indicate your salary expectations.
Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant.
megan@personastaff.co.za
7h
1
SavedSave
The Engineering Department currently has a vacancy for an attentive to detail, self-motivated and dedicated individual to join their team in the Fitters department.
Responsibilities will include, but are not limited to:
Conducting mechanical inspections on all production machinery when requiredCompliance and adherence to the Company in-house maintenance program and proceduresResponsible for conducting routine planned and preventative maintenance
Hydraulic systems (leaks repairs, filter change outs)Conveyor belts, drives, pulleys and replacement of rollersLubrication tasksV-belts replacementsGeneral housekeeping
Attend breakdowns when required on all Production machineryFault finding on hydraulic systemsAssembly and pressure testing of hydraulic cylindersServicing of various hydraulic componentsProvide coaching to semi-skilled staffAdhering to the regulations as set out in the Occupational Health and Safety Act
Qualifying Criteria :
Qualified Fitter Artisan (Red Seal certification)Minimum Grade 12 or equivalentMinimum 5 years’ experience in a heavy industry or similar environmentMust be physical fit and able to work at heights and in confined spacesStrong Hydraulic background will be an advantage
Qualifying Attributes :
Must be able to work with minimum supervisionBasic computer proficiencyEnjoy practical and manual work & be able to work in a pressurized environmentAbility to work independently as well as in a teamSelf-motivated and results orientatedGood communication skillsMust have sober habitsAttention to detailWillingness to work overtime when requiredMust be a team playerSound understanding of an array of tools and technical equipment
Interested applicants are required to forward their CV. We regret that we cannot contact all applicants regarding their status. Should you not be contacted by us within 14 days from the date of your submission, please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMDA2OTgwMzIwP3NvdXJjZT1ndW10cmVl&jid=1728989&xid=1006980320
8h
1
SavedSave
The SA Metal Group currently has a vacancy for a committed, hands-on, attentive to detail, dedicated individual to join the Fitters team.
Responsibilities will include, but are not limited to:
Providing support to the department and Artisans with routine and preventative maintenanceProviding support and assistance with repairs on various equipment and machinesAssist in mechanical assemblyAssist with tools and lubrication of machineryDemonstrate basic mechanical knowledgeHousekeeping of the workshop and various work areasAbide by the regulations as set out in the Occupational Health and Safety ActOther adhoc duties as assign by the Department Supervisor, Team Leader or Engineering Manager
Qualifying Experience:
Grade 12 or equivalentMinimum of N3 or proven interest in obtaining trade test qualification in FittingMinimum of 3 years relevant working experience within the engineering or metal industryKnowledge and use of power toolsStrength to handle materials and tools (physically fit)Good hand-eye coordinationHands on practical approach to the jobSafety awareneness and consciousnessAbility to work under challenging conditionsMust be able to work in confined spaces and at heightsSound communication skills (understand, read and write English)Computer literateMust be prepared to work weekends and overtime when required
Qualifying Attributes:
Hard-working and self-motivatedTime management and organizational skillsDisplay a professional work approachAbility to work independently as well as part of a teamLogical and detail orientatedCommitment to a strong business ethic and integrityExcellent standards in execution
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNTYxMzA5NTk5P3NvdXJjZT1ndW10cmVl&jid=1754474&xid=1561309599
8h
1
The Fitters department currently has a vacancy for a detail orientated, process-driven, dedicated individual to join their team. This position requires someone who is able to work in a fast paced, demanding and pressurized environment. The successful candidate must be able to lead a team effectively and must be skilled in time management, planning, decision making and problem-solving.
Responsibilities will include, but are not limited to:
Implement and manage the routine, planned and preventative maintenance programs for all machinery and equipmentManaging the mechanical inspections on all production machinery when requiredManaging compliance and adherence to the Company in-house maintenance program and proceduresManage and assist where possible with any breakdowns on all Production machineryAssist employees with fault finding and giving suitable input on diagnosticsManaging the servicing of any mechanical componentsInvestigate breakdowns and provide accurate feedback and forecastingEnsure that any critical parts that are to be kept at stores are updated regularlyLiaising with suitable suppliers and sourcing quality of parts and sparesEstimate costs and time required for repair or maintenance of the machineryEnsuring compliance of timekeeping, productive output, discipline and work programs within the Fitters department with assistance from Engineering management as requiredLead and manage the productivity and efficiency of all workshop activities with assistance from Engineering management as requiredEnsure that the machinery, equipment and tools are regularly checked as per the Safety File for the departmentEnsure compliance to Legal Requirements, Company and Health & Safety rules, policies and regulationsPlanning of department needs with the Engineering Manager and/or Directors as well as the effective execution of the said planningManage attendance and timekeeping by executing all administrative processes required i.e. time sheets of employees, leave, completing of daily attendance registersManage the distribution of overtime between the teamLiaise with HR in terms of any concerns, issues or disciplinary management of staffReview training requirements of the staff and report back to Engineering Manager and/or Directors the needsTake ownership and manage the CWorks processes for the Fitters department with assistance from Engineering management as requiredMonitor quality and efficiency of teams’ work programs and report any issues or possible improvements to Engineering Manager and/or DirectorsManage the manpower utilization and ensure it remains above 75% of work hours allocatedAbide by the regulations as set out in the Occupational Health and Safety ActAny other tasks, ...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNjAxNDg1MzU5P3NvdXJjZT1ndW10cmVl&jid=1754475&xid=1601485359
8h
1
SavedSave
MECHANICAL FITTER – SA STEELWORKS
AIRPORT INDUSTRIA – CAPE TOWN
SA Steelworks has a position for a qualified, committed, hardworking and motivated Mechanical Fitter in the Fitters Department at our SA Steelworks Division in Cape Town. The successful applicant will report to the Fitters Manager.
Responsibilities will include, but are not limited to:
Implementing Company maintenance procedures, including:
Conducting inspections on all plant machineryConducting routine planned and preventative maintenanceWorking through a computerised maintenance management systemAttending to breakdowns when requiredSetup and adjustment of machinery/equipmentGeneral housekeepingAdhering to Occupational Health and Safety Act
Fit and assemble metal parts, tools or sub-assemblies, including welding or brazing partsSet up and/or operate hand and machine tools and welding equipmentExamine detailed drawings or specifications to advice with regard to job, material and equipment requirementsCheck accuracy and quality of finished parts, tools or sub-assemblies.Provide coaching to semi-skilled staff
Machinery responsibilities will include, but are not limited to:
Industrial gearboxes, pinion boxes and flywheelsIndustrial shearsPinch rollersBearing housing assembliesBelt conveyors, drives, pulleys and rollersRoller table conveyersVibration tablesHydraulic and lubrication systemsAutomatic wire tying machinesElevatorsElectric, liquid and gas fuelled furnacesEvaporative coolersMobile and driven machinery
Abilities & technical competencies required:
Ability to work in challenging conditionsAble to work at heightsAble to work in a teamAble to work independentlyGood communication skillsSafety consciousWorking knowledge of OHSAExperience working in the steel industry will be advantageousWorking knowledge of C-Works, SAP, API Pro or similar CMMS
Applicants must have the following qualifying criteria:
Red Seal Trade Test qualification in FittingMinimum 5 years’ post trade test work experience in a manufacturing or production environmentKnowledge of typical power tools used in the tradeStrength to handle materials, tools and machinesGood hand-eye coordinationWillingness to work overtimePerform standby and call out dutiesIn good health, physically fitOwn reliable transport
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNTQ5NDQ1MjQwP3NvdXJjZT1ndW10cmVl&jid=1543475&xid=1549445240
8h
1
SavedSave
MECHANICAL FITTER – SA STEELWORKS
AIRPORT INDUSTRIA – CAPE TOWN
SA Steelworks has a position for a qualified, committed, hardworking and motivated Mechanical Fitter in the Fitters Department at our SA Steelworks Division in Cape Town. The successful applicant will report to the Fitters Manager.
Responsibilities will include, but are not limited to:
Implementing Company maintenance procedures, including:
Conducting inspections on all plant machineryConducting routine planned and preventative maintenanceWorking through a computerised maintenance management systemAttending to breakdowns when requiredSetup and adjustment of machinery/equipmentGeneral housekeepingAdhering to Occupational Health and Safety Act
Fit and assemble metal parts, tools or sub-assemblies, including welding or brazing partsSet up and/or operate hand and machine tools and welding equipmentExamine detailed drawings or specifications to advice with regard to job, material and equipment requirementsCheck accuracy and quality of finished parts, tools or sub-assemblies.Provide coaching to semi-skilled staff
Machinery responsibilities will include, but are not limited to:
Industrial gearboxes, pinion boxes and flywheelsIndustrial shearsPinch rollersBearing housing assembliesBelt conveyors, drives, pulleys and rollersRoller table conveyersVibration tablesHydraulic and lubrication systemsAutomatic wire tying machinesElevatorsElectric, liquid and gas fuelled furnacesEvaporative coolersMobile and driven machinery
Abilities & technical competencies required:
Ability to work in challenging conditionsAble to work at heightsAble to work in a teamAble to work independentlyGood communication skillsSafety consciousWorking knowledge of OHSAExperience working in the steel industry will be advantageousWorking knowledge of C-Works, SAP, API Pro or similar CMMS
Applicants must have the following qualifying criteria:
Red Seal Trade Test qualification in FittingMinimum 5 years’ post trade test work experience in a manufacturing or production environmentKnowledge of typical power tools used in the tradeStrength to handle materials, tools and machinesGood hand-eye coordinationWillingness to work overtimePerform standby and call out dutiesIn good health, physically fitOwn reliable transport
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80MTg5NjI3ODc0P3NvdXJjZT1ndW10cmVl&jid=1690105&xid=4189627874
8h
1
SavedSave
SA STEELWORKS - FITTERS ASSISTANT
AIRPORT INDUSTRIA – CAPE TOWN
The SA Steelworks Fitters Department requires a committed, hardworking and motivated individual to join their team. The successful applicant will be responsible for, but not limited to General functions within the Fitters Department.
RESPONSIBILITIES WILL INCLUDE, BUT ARE NOT LIMITED TO:
Changing water and hydraulic pipingStrip machine parts for cleaningAssemble machine parts after cleaning themPerform routine inspectionsDo greasing on plant equipment as well as vehiclesFilling of grease gunsCleaning of the workshop areas (Housekeeping )Be able to measure equipment, read a tape measureAssisting the Manager / Supervisor with Ad hoc dutiesAdhere to health and safety regulations and instructions and advise the responsible person whenever there are risks identified
Under supervision:
Assist the fitter with bigger maintenance tasksAssist with Operating grinders ,drilling machines safelyAssist with changing drill bits and grinder disksFit bearings and grease before assemblyIdentify different tools /spanners
QUALIFYING REQUIREMENTS
Grade 12 certificateCertificate in Fitting and TurningPrevious experience in a similar environmentA general knowledge off hand tools and electrical toolsWillingness to work overtime as per operational requirements if and when required
QUALIFYING ATTRIBUTES
Ability to work in a team environmentAble to work independentlyAbility to work under challenging physical and climatic conditionsGood communication and interpersonal skillsAbility to function efficiently in pressurized work situationsIn good health and physically fitMust be of sober habits
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNjYwODIzMjUzP3NvdXJjZT1ndW10cmVl&jid=1608100&xid=2660823253
8h
1
SavedSave
Fitter & Turner
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements:
• Grade 12 / National Senior Certificate.
• Section 13 Fitter and Turner Trade Test Certificate.
• 3 - 5 years post trade experience.
• Experience within a manufacturing environment (beneficial).
• Energetic, proactive and able to work under pressure.
• A valid driver’s license with own reliable transport.
Skills and Knowledge Required:
•Preventative Maintenance Routines.
•Welding (Mig Tig & Arc), Milling, and Turning.
•Planning - Check that all part complies with procurement register and data pack. (Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
•Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
•Drilling and/or slotting holes: Proper use of hand drill, Mag base drill, machining machine, etc.
•Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc. (Prep for next phase)
•Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack. (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
•Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
•Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
•Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
•Pneumatics and Hydraulics.
•Gearboxes.
•Water Systems and Cooling Towers.
•Basic Electrical Experience.
•Bearing and Shaft Changing.
•Fault Finding and Diagnosis.
•Lubrication.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
8h
1
SavedSave
Fitter and Turner.
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Skills and Knowledge Required
Preventative Maintenance Routines.
Welding (Mig Tig & Arc), Milling, and Turning.
Planning - Check that all part complies with procurement register and data pack.(Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
Drilling and/or slotting holes: Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Pneumatics and Hydraulics.
Gearboxes.
Water Systems and Cooling Towers.
Basic Electrical Experience.
Bearing and Shaft Changing.
Fault Finding and Diagnosis.
Lubrication.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Consultant Name: Megan Ockhuis
8h
1
Fitter & Turner (R&D Testing Artisan)
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible to attend all breakdowns on machines.
Monitor, report, and amend all stock and non / stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of all service history information.
Preventative Maintenance
:Responsible for all Chain CU Jigs, R&D Testing & Zinc Plating.
Responsible to utilize breakdown service & inspection data to motivate improvements on all above-mentioned production lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all responsible production lines.
Responsible for continuous improvement on maintenance procedures and checklists.
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all relevant production lines.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all responsible machinery and components.
Liaise with Projects Engineer on commissioning of all new responsible machinery and components.
Responsible for innovation and improvement of all responsible machinery and components
Responsible to interact with R&D, Design, and contractors on testing phases of all responsible machinery and components.
Please forward your CV to megan@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Inform
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004763/MM&source=gumtree
9h
1
SavedSave
Senior Fitter & Turner (Maintenance)
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner in their Maintenace division.
Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible to attend all breakdowns on all machines.
Monitor, report, and amend all stock and non / stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of all Induction ovens & temper furnaces service history information.
Liaise with Induction Coil Specialist and Induction Generator Specialist on any breakdowns regarding all Induction ovens & temper furnaces and commissioning thereof.
Preventative Maintenance
:Responsible for all Induction ovens & temper furnaces standardization per production unit.
Responsible to utilize breakdown service & inspection data to motivate improvements on all Induction ovens & temper furnaces lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all Induction ovens & temper furnaces
Responsible for continuous improvement on maintenance procedures and checklists
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all Induction ovens & temper furnaces.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all Induction ovens & temper furnaces.
Liaise with Projects Engineer on commissioning of all new Induction ovens & temper furnaces.
Responsible for innovation and improvement of all Induction ovens & temper furnaces
Responsible to interact with R&D, Design, and contractors on testing phases of all Induction ovens & temper furnaces machines.
Please forward your CV to megan@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected accor
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004781/MM&source=gumtree
9h
1
Fitter & Turner (R&D Testing Artisan)
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible to attend all breakdowns on machines.
Monitor, report, and amend all stock and non / stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of all service history information.
Preventative Maintenance
:Responsible for all Chain CU Jigs, R&D Testing & Zinc Plating.
Responsible to utilize breakdown service & inspection data to motivate improvements on all above-mentioned production lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all responsible production lines.
Responsible for continuous improvement on maintenance procedures and checklists.
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all relevant production lines.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all responsible machinery and components.
Liaise with Projects Engineer on commissioning of all new responsible machinery and components.
Responsible for innovation and improvement of all responsible machinery and components
Responsible to interact with R&D, Design, and contractors on testing phases of all responsible machinery and components.
Please forward your CV to natasha@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Person
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004787/N&source=gumtree
9h
1
SavedSave
Senior Fitter & Turner (Maintenance)
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner in their Maintenace division.
Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible to attend all breakdowns on all machines.
Monitor, report, and amend all stock and non / stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of all Induction ovens & temper furnaces service history information.
Liaise with Induction Coil Specialist and Induction Generator Specialist on any breakdowns regarding all Induction ovens & temper furnaces and commissioning thereof.
Preventative Maintenance
:Responsible for all Induction ovens & temper furnaces standardization per production unit.
Responsible to utilize breakdown service & inspection data to motivate improvements on all Induction ovens & temper furnaces lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all Induction ovens & temper furnaces
Responsible for continuous improvement on maintenance procedures and checklists
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all Induction ovens & temper furnaces.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all Induction ovens & temper furnaces.
Liaise with Projects Engineer on commissioning of all new Induction ovens & temper furnaces.
Responsible for innovation and improvement of all Induction ovens & temper furnaces
Responsible to interact with R&D, Design, and contractors on testing phases of all Induction ovens & temper furnaces machines.
Please forward your CV to natasha@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protec
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004784/N&source=gumtree
9h
1
Fitter & Turner (R&D Testing Artisan)
An internationally established Manufacturing company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible for attending all breakdowns on machines.
Monitor, report, and amend all stock and nonstock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to the progress of repairs and diagnosis of faults.
Report on the duration of downtime on the maintenance job card.
Responsible for tracking and upkeep of all service history information.
Preventative Maintenance
:Responsible for all Chain CU Jigs, R&D Testing & Zinc Plating.
Responsible for utilizing breakdown service & inspection data to motivate improvements on all above-mentioned production lines.
Responsible for reporting & investigating unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all responsible production lines.
Responsible for continuous improvement on maintenance procedures and checklists.
Responsible for interacting with the maintenance department relating to any changes, and improvements following investigations on breakdowns, improvements on downtime etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to the Design department relating to improvements & issues on all relevant production lines.
Responsible for ensuring all necessary tools & equipment are available and in working condition.
Responsible for reporting any deviations to original as-built drawings/designs on all responsible machinery and components.
Liaise with the Projects Engineer on the commissioning of all new responsible machinery and components.
Responsible for innovation and improvement of all responsible machinery and components
Responsible for interacting with R&D, Design, and contractors on testing phases of all responsible machinery and components.
Please forward your CV to liza-nelle@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. I
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004790/LN&source=gumtree
9h
1
SavedSave
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements:
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Skills and Knowledge Required:
. Preventative Maintenance Routines.
. Welding (Mig Tig & Arc), Milling, and Turning.
. Planning - Check that all part complies with procurement register and data pack. .... (Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
. Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
. Drilling and/or slotting holes: Proper use of hand drill, Mag base drill, machining machine, etc.
. Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc. (Prep for next phase)
. Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack. (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
. Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
. Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
. Pneumatics and Hydraulics.
. Gearboxes.
. Water Systems and Cooling Towers.
. Basic Electrical Experience.
. Bearing and Shaft Changing.
. Fault Finding and Diagnosis.
. Lubrication.
Please forward your CV to reception@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
reception@personastaff.co.za
9h
1
SavedSave
Senior Fitter & Turner (Maintenance)
An internationally established manufacturing company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner in their maintenance division.
Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible to attend all breakdowns on all machines.
Monitor, report, and amend all stock and non / or stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to the progress of repairs and diagnosis of faults.
Report on the duration of downtime on the maintenance job card.
Responsible for tracking and upkeep of all Induction ovens & temper furnaces service history information.
Liaise with Induction Coil Specialist and Induction Generator Specialist on any breakdowns regarding all Induction ovens & temper furnaces and commissioning thereof.
Preventative Maintenance
:Responsible for all Induction ovens & temper furnaces standardization per production unit.
Responsible to utilize breakdown service & inspection data to motivate improvements on all Induction ovens & temper furnace lines.
Responsible for reporting & investigating unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all Induction ovens & temper furnaces
Responsible for continuous improvement of maintenance procedures and checklists
Responsible for interacting with the maintenance department relating to any changes, and improvements following investigations on breakdowns, improvements on downtime etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to the Design department relating to improvements & issues on all Induction ovens & temper furnaces.
Responsible for ensuring all necessary tools & equipment are available and in working condition.
Responsible for reporting any deviations to original as-built drawings/designs on all Induction ovens & temper furnaces.
Liaise with the Projects Engineer on the commissioning of all new Induction ovens & temper furnaces.
Responsible for innovation and improvement of all Induction ovens & temper furnaces
Responsible for interacting with R&D, Design, and contractors on testing phases of all Induction ovens & temper furnaces machines.
Please forward your CV to liza-nelle@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004796/LN&source=gumtree
9h
1
SavedSave
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner in their maintenance division.
Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
A valid driver’s license with own reliable transport.
Responsibilities
Attend to breakdowns promptly across all machines, ensuring minimal downtime.
Monitor and manage stock levels of critical spare parts in the Stores & Maintenance department.
Provide regular reports to Maintenance & Production on repair progress and fault diagnosis.
Record downtime duration on maintenance job cards for analysis.
Maintain service history records for all Induction ovens & temper furnaces.
Collaborate with specialists for breakdowns and commissioning of equipment.
Standardize and improve maintenance procedures for production units.
Utilize breakdown data for continuous improvement of equipment performance.
Conduct weekly, monthly, and yearly services on equipment.
Enhance maintenance procedures and checklists through continuous improvement.
Provide feedback to the Design department for equipment improvements.
Ensure availability and functionality of necessary tools and equipment.
Report any deviations from original designs and liaise with Projects Engineer for commissioning of new equipment.
Drive innovation and improvement in equipment performance.
Collaborate with R&D, Design, and contractors during testing phases
Please forward your CV to craig@personastaff.co.za
and indicate your salary expectations.Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004793/CS&source=gumtree
9h
1
Fitter & Turner (R&D Testing Artisan)
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Responsibilities
Attend to all breakdowns promptly across various production machines.
Monitor and manage stock levels of critical spare parts in the Stores & Maintenance department.
Provide detailed reports to Maintenance & Production regarding repair progress and fault diagnosis.
Record downtime duration on maintenance job cards for analysis.
Maintain comprehensive service history records for all equipment.
Conduct preventative maintenance on Chain CU Jigs, R&D Testing, and Zinc Plating lines.
Utilize breakdown and inspection data to drive improvements across production lines.
Investigate and report unforeseen limitations or stoppages during planned services.
Perform regular weekly, monthly, and yearly services on designated production lines.
Continuously improve maintenance procedures and checklists.
Collaborate with the maintenance department to implement changes and improvements following breakdown investigations.
Monitor and report on the condition of machine components.
Provide feedback to the Design department for improvements and address issues on relevant production lines.
Ensure availability and functionality of necessary tools and equipment.
Report any deviations from original designs and collaborate with Projects Engineer for commissioning of new machinery.
Drive innovation and improvement in machinery and components.
Collaborate with R&D, Design, and contractors during testing phases.
Please forward your CV to craig@personastaff.co.za
and indicate your salary expectations.Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004795/CS&source=gumtree
9h
1
SavedSave
Our client, in the manufacturing industry based in the Northern Suburbs is seeking a suitably qualified and experienced Fitter and Turner.
Requirements:
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
A valid driver’s license with own reliable transport.
Responsibilities:
Breakdowns:
Responsible to attend all breakdowns on all machines.
Monitor, report, and amend all stock and non / stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of all Induction ovens & temper furnaces service history information.
Liaise with Induction Coil Specialist and Induction Generator Specialist on any breakdowns regarding all Induction ovens & temper furnaces and commissioning thereof.
Preventative Maintenance
:Responsible for all Induction ovens & temper furnaces standardization per production unit.
Responsible to utilize breakdown service & inspection data to motivate improvements on all Induction ovens & temper furnaces lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all Induction ovens & temper furnaces
Responsible for continuous improvement on maintenance procedures and checklists
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all Induction ovens & temper furnaces.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all Induction ovens & temper furnaces.
Liaise with Projects Engineer on commissioning of all new Induction ovens & temper furnaces.
Responsible for innovation and improvement of all Induction ovens & temper furnaces
Responsible to interact with R&D, Design, and contractors on testing phases of all Induction ovens & temper furnaces machines.
To apply, please forward your CV to hannah@personastaff.co.za.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004802/H&source=gumtree
9h
1
Our client within the manufacturing industry is seeking an experienced Fitter and Turner to join their team in the Northern Suburbs.
Requirements:
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Responsibilities:
Breakdowns:
Responsible to attend all breakdowns on machines.
Monitor, report, and amend all stock and non / stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of all service history information.
Preventative Maintenance
:Responsible for all Chain CU Jigs, R&D Testing & Zinc Plating.
Responsible to utilize breakdown service & inspection data to motivate improvements on all above-mentioned production lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all responsible production lines.
Responsible for continuous improvement on maintenance procedures and checklists.
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all relevant production lines.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all responsible machinery and components.
Liaise with Projects Engineer on commissioning of all new responsible machinery and components.
Responsible for innovation and improvement of all responsible machinery and components
Responsible to interact with R&D, Design, and contractors on testing phases of all responsible machinery and components.
To apply, please forward your CV to hannah@personastaff.co.za.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004804/H&source=gumtree
9h
Save this search and get notified
when new items are posted!
