Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Suggested
Results for boilermaker jobs only in Jobs in Western Cape
1
SavedSave
Our client, based in the Northern Suburbs in the manufacturing industry is seeking a qualified and experienced Boilermaker on a 6-month contract position.
Requirements:
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Responsibilities:
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc. installed. Test the safety of the operation/function. Identify and address snags.
To apply, please forward your CV to hannah@personastaff.co.za.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hour
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004803/H&source=gumtree
19h
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to craig@personastaff.co.za
and indicate your salary expec
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004794/CS&source=gumtree
19h
2
Welder Installer required for a manufacturing company based in Bellville South.Candidates to have following requirements:Mig & Tig WeldingMinimum two years experience in same/similar industryValid South African identity documentNo boilermakersSober habitsSuccessful candidate to undergo criminal check.Please send CV with contact details, list of duties at previous work, reasons for leaving previous work and contactable references, to michelle@palmers-iron.co.za
1d
1
You will be required to maintain and have knowledge of
a production facility. Your skills should include, welding (MIG and TIG) experience in
aluminium and stainless, no stick work required. You will be required to carry
out daily repair work to production conveyor systems as well as rebuild
production conveyor systems as well as pipe work. You should hold a red seal as
a Boilermaker with welding experience and a have a minimum of 3 years practical experience.Available ImmediatelyOwn transport
essentialYou will be required to work shiftsReside in Cape TownYou will be based in WoodstockPlease email an updated cv to cv@gulf.co.za with the subject :BOILERMAKER.Please include your trade certificate
1d
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to natasha@personastaff.co.za
and indicate your salary exp
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004788/N&source=gumtree
2d
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post-trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Ensure that all parts comply with the procurement register and data pack (Report any deviations). Check that all tools and equipment are available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to liza-nelle@personastaff.co.za
and indicate your s
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004789/LN&source=gumtree
2d
1
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Salary: R120 - 150 p/hConsultant Name: Megan Ockhuis
2d
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements:
• Grade 12 / National Senior Certificate.
• Qualified Boilermaker Trade Test Certificate.
• Minimum of 1 -2 years’ post trade experience.
• A valid driver’s license with own reliable transport.
Skills and Knowledge Required:
•Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
•Welding – Mig, Tig and Arc
•Drilling and/or slotting holes. Proper use of hand drill, Mag base drill, machining machine, etc.
•Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc. (Prep for next phase)
•Machining and Fitting - Planning: Check that all part complies with procurement register and data pack. (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
•Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
•Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
•Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
•Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
•Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc. installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
2d
1
SavedSave
SA STEELWORKS – QUALIFIED WELDER
Job description:
The Boilershop department currently has a vacancy for a hardworking, dedicated Qualified Welder to join their team. The successful candidate must be able to perform general welding on structures, other equipment and machinery. The successful candidate must repair existing components while working accurately and neatly; this applies to repairs and maintenance performed in the workshop and onsite. The successful candidate works in conjunction with the Boilermakers and must be proficient in all forms of welding. The successful candidate must furthermore ensure that their work space is kept neat and tidy (housekeeping) in the workshop and onsite.
Qualifying Criteria:
Must have a relevant trade test certificate in Welding ( no coding)Minimum 5-8 years’ experience in a similar environment (Steel and or Industrial environment)Must have experience in pipe welding, Copper, Brazing and Silver solder and Cast steelMust be proficient in Mig, Tig Gas and SMAWExtensive knowledge of power toolsEnjoys technical activitiesKnowledge of Health and Safety RulesAbility to work under challenging conditionsExcellent communication skills
Qualifying Attributes
Hard-working and self-motivatedMust be prepared to work overtime and weekends when requiredMust be available to work December and Easter ShutdownsStrength to handle materials & tools (physically fit)Must have sober habitsGood hand-eye coordinationAble to work at heights and in confined spacesAbility to work independently as well as in a teamTime management and organizational skillsExcellent standards in execution
Other Information:
Job title: Qualified Welder
Reporting to: Boilershop Manager & Engineering Manager
Job type: Permanent position
Benefits include:
Provident fundLife cover at 4x annual salaryFuneral cover15 x paid leave days per annumLong service leave after five years of employment
Standard hours
07h30–17h00: Monday – Thursday
07h30–16h00: Friday
May be required to work overtime as per operational requirements
We offer a highly competitive package depending on the extent of the applicant’s qualifications and experience.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS81NDk0MDA4ODU/c291cmNlPWd1bXRyZWU=&jid=1684868&xid=549400885
2d
1
SavedSave
Job description:
The Boilershop department currently has a vacancy for a hardworking, dedicated individual to join their team. The successful candidate must be able to read fabrication drawings, work accurately and neatly when fabricating components. The successful candidate must repair existing components while working accurately and neatly; this applies to repairs performed in the workshop and onsite. The successful candidate is expected to use the correct tools and work methods and not waste time unnecessarily. The successful candidate must furthermore ensure that their work space is kept neat and tidy (housekeeping) in the workshop and onsite.
Qualifying Criteria:
Qualified with a relevant trade test certificate in BoilermakingMinimum 8 years’ experience in a similar environment (Steel and or Industrial environment)Ability to read and interpret blueprintsExtensive knowledge of power toolsKnowledge of Health and Safety RulesAbility to work under challenging conditionsNo fear of heights or working in confined spacesExcellent communication skills (understand, read and write in English)
Qualifying Attributes
Hard-working and self-motivatedMust be prepared to work overtime when requiredStrength to handle materials & tools (physically fit)Good hand-eye coordinationAbility to work independently as well as in a teamTime management and organizational skillsExcellent standards in execution
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMjg3NTQ0Mzg5P3NvdXJjZT1ndW10cmVl&jid=1608683&xid=3287544389
2d
1
Urgent Boiler Makers needed:
-Must have a certified Red Seal Trade certificate
-Location of work: Belville, Stikland
-40 hour work week
-Clear criminal record
-Must reside in Cape Town
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS82MjUzMzA4MTc/c291cmNlPWd1bXRyZWU=&jid=1749176&xid=625330817
2d
1
SA STEELWORKS
GENERAL TECHNICAL ASSISTANT (BOILERSHOP)
AIRPORT INDUSTRIA - CAPE TOWN
The SA Steelworks Boilershop department requires committed, hardworking and motivated individuals to join their team. The successful applicants will be responsible for, but not limited to General Assistant functions.
RESPONSIBILITIES WILL INCLUDE, BUT ARE NOT LIMITED TO:
Housekeeping: Ensuring the cleanliness of all work stations and areas surrounding themAssisting the Manager / Supervisor with Ad hoc dutiesAssist Boilermakers with general work tasks and upkeep of structural machinesAdhere to health and safety regulations and instructions and advise the responsible person whenever there are risks identifiedAny other work tasks as operationally required
QUALIFYING REQUIREMENTS
A minimum Grade 12 certificateExposure to a Boilershop environment (advantageous)
QUALIFYING ATTRIBUTES
Ability to cut various thickness of steel with gas cutting equipmentExperience in operating grinding and drilling portable tools accuratelyAbility to work in a team environmentAble to work independentlyWillingness to work overtime and weekends as per operational requirements if and when requiredAbility to work under challenging physical and climatic conditionsGood communication and interpersonal skillsAbility to function efficiently in pressurized work situationsIn good health and physically fitMust be of sober habitsAbility to work at Heights and in confined spaces
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMjc1NDYxODI1P3NvdXJjZT1ndW10cmVl&jid=1542803&xid=2275461825
2d
1
SavedSave
Job description:
The Boilershop department currently has a vacancy for a hardworking, dedicated individual to join their team. The successful candidate must be able to read fabrication drawings, work accurately and neatly when fabricating components. The successful candidate must repair existing components while working accurately and neatly; this applies to repairs performed in the workshop and onsite. The successful candidate is expected to use the correct tools and work methods and not waste time unnecessarily. The successful candidate must furthermore ensure that their work space is kept neat and tidy (housekeeping) in the workshop and onsite.
Qualifying Criteria:
Qualified with a relevant trade test certificate in BoilermakingMinimum 8 years’ experience in a similar environment (Steel and or Industrial environment)Ability to read and interpret blueprintsExtensive knowledge of power toolsKnowledge of Health and Safety RulesAbility to work under challenging conditionsNo fear of heights or working in confined spacesExcellent communication skills (understand, read and write in English)
Qualifying Attributes
Hard-working and self-motivatedMust be prepared to work overtime when requiredStrength to handle materials & tools (physically fit)Good hand-eye coordinationAbility to work independently as well as in a teamTime management and organizational skillsExcellent standards in execution
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yODMyMTg4NzQ3P3NvdXJjZT1ndW10cmVl&jid=1746087&xid=2832188747
2d
1
SavedSave
SA STEELWORKS - QUALIFIED BOILERMAKER
The Group has a Qualified Boilermaker position available at SA Steelworks. The successful candidate will provide support to the Boilershop Department and will be situated at our Branch in the Airport Industria, Cape Town. The successful candidates will report to the Boilershop Manager.
POSITION REQUIREMENTS:
Must be a qualified boilermaker with minimum 5 - 8 years working experienceMust have own transport and a valid unendorsed licenseMust be able to work overtime, public holidays and weekends if requiredMust be available for callouts when neededMust be available for December and Easter shutdownsPrevious working experience in a steel environment (Meltshop)will be an advantageMust have extensive knowledge of structural steel with the ability to read drawings and build equipment with minimum supervisionMust be able to work well within a team environmentMust be able to work independently when requiredAbility to work under challenging conditionsMust have basic knowledge of Health & Safety RulesGood communication skillsKnowledge of various hand and workshop tools is an advantageMust not have a fear of heights or confined spacesMust have experience with Automated Maintenance systemsMust have good fitness levels and mobility
RESPONSIBILITIES:
Responsible for manufacture/fabrication/assembly and or erection of workResponsible for day to day maintenance of machinery in and around the plantResponsible for attending to breakdowns of machinery in and around the plantWill perform daily inspection of the plant (RCM: Reliable Centralized Maintenance system)General housekeeping in and around the boilermaker workshop
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS81NDA1OTA3Mzc/c291cmNlPWd1bXRyZWU=&jid=1684866&xid=540590737
2d
1
SavedSave
SA STEELWORKS - QUALIFIED BOILERMAKER
The Group has a Qualified Boilermaker position available at SA Steelworks. The successful candidate will provide support to the Boilershop Department and will be situated at our Branch in the Airport Industria, Cape Town. The successful candidates will report to the Boilershop Manager.
POSITION REQUIREMENTS:
Must be a qualified boilermaker with minimum 5 - 8 years working experienceMust have own transport and a valid unendorsed licenseMust be able to work overtime, public holidays and weekends if requiredMust be available for callouts when neededMust be available for December and Easter shutdownsPrevious working experience in a steel environment (Meltshop)will be an advantageMust have extensive knowledge of structural steel with the ability to read drawings and build equipment with minimum supervisionMust be able to work well within a team environmentMust be able to work independently when requiredAbility to work under challenging conditionsMust have basic knowledge of Health & Safety RulesGood communication skillsKnowledge of various hand and workshop tools is an advantageMust not have a fear of heights or confined spacesMust have experience with Automated Maintenance systemsMust have good fitness levels and mobility
RESPONSIBILITIES:
Responsible for manufacture/fabrication/assembly and or erection of workResponsible for day to day maintenance of machinery in and around the plantResponsible for attending to breakdowns of machinery in and around the plantWill perform daily inspection of the plant (RCM: Reliable Centralized Maintenance system)General housekeeping in and around the boilermaker workshop
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNDM1ODIwMjE4P3NvdXJjZT1ndW10cmVl&jid=1724161&xid=1435820218
2d
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za
and indicate your salary expec
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004764/MM&source=gumtree
2d
1
SavedSave
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Boilermaker with Fabrication Experience.
REQUIREMENTS:
Grade 12 / National Senior Certificate
Fitter and Turner Trade Test Certificate
Minimum of 2 years’ experience as a qualified Fitter and Turner in a manufacturing environment
Energetic, proactive and able to work under pressure
A valid driver’s license with own reliable transport
Skills and Knowledge Required
·Admin: Complete all Fabrication Request feedback paperwork. Complete MJR’s. Compile SOW and BOM for small FR. Complete all TSIS and H&S paperwork.
·Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
·Welding – Mig, Tig and Arc
·Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
·Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
·Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
·Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
·Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
. Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
·Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
·Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
2d
1
SavedSave
A client based in Northern Suburbs, Cape Town is seeking to employ Semi-Skilled candidates with experience in:
- Assembling / Carpentry work (Cupboards, steel, tables, and chairs etc)
- Welding and/or boiler making skills.
All candidates must have basic experience with at least one of the mentioned skills.
REQUIRMENTS:
. Must have Matric.
. Any welding / Boilermaking or carpentry / woodwork certificates is beneficial.
. Must have at least 1 year experience.
. Must be available immediately.
To apply, please send your CV to reception@personastaff.co.za
Please note that only shortlisted candidates that meet the requirements will be contacted.
Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy
reception@personastaff.co.za
2d
4
SavedSave
Welder Installer required for a Gate & Fence company situated in Bellville South. The successful candidate to meet the following criteria:-Minimum 4 years experience in same/similar industry-No boilermakers-Be of sober habits-Mig & Tig welding-Valid code 08 drivers license -Gate & fence installation experience-Valid South African idSuccessful candidate will have to undergo Police clearance & medical check up.Send CV with all contactable references, list of duties & reason for leaving plus all your contact details to: michelle@palmers-iron.co.za If you are not contacted within two weeks, consider your application as unsuccessful.
6d
1
SavedSave
Job description:The Boilershop department currently has a vacancy for a hardworking, dedicated individual to join their team. The successful candidate must be able to read fabrication drawings, work accurately and neatly when fabricating components. The successful candidate must repair existing components while working accurately and neatly; this applies to repairs performed in the workshop and onsite. The successful candidate is expected to use the correct tools and work methods and not waste time unnecessarily. The successful candidate must furthermore ensure that their work space is kept neat and tidy (housekeeping) in the workshop and onsite.Qualifying Criteria: Qualified with a relevant trade test certificate in BoilermakingMinimum 8 years’ experience in a similar environment (Steel and or Industrial environment)Ability to read and interpret blueprintsExtensive knowledge of power toolsKnowledge of Health and Safety RulesAbility to work under challenging conditionsNo fear of heights or working in confined spacesExcellent communication skills (understand, read and write in English) Qualifying AttributesHard-working and self-motivatedMust be prepared to work overtime when requiredStrength to handle materials & tools (physically fit)Good hand-eye coordinationAbility to work independently as well as in a teamTime management and organizational skillsExcellent standards in execution
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzE4NDI0OF9fNDk3P3V0bV9zb3VyY2U9Z3VtdHJlZSZ1dG1fbWVkaXVtPWZlZWQma2V5d29yZD0=&jid=1779867&xid=1109_184248
3mo
Save this search and get notified
when new items are posted!
