Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for scrap in "scrap" in Jobs in Eastern Cape in Eastern Cape
1
Job Responsibilities: Directly oversee the shift leaders, Store staff and clerks, Tooling. Oversee Equipment, tooling and Utilities. Compile weekly reports - Top Downtime and corrective actions, KPIs - PM Adherence etc. Attend daily OPS meeting to provide feedback on equipment status and actions. Attend daily Scrap/Quality meeting and set actions to minimize. Liaise with Planning to incorporate the preventative maintenance plan within the prod. plan. Compile the monthly departmental KPIs report with ICA / PCA Actions. Liaise with suppliers and contractors for the execution of planned projects and/or maintenance and repairs. Obtain quotes based on SOWs and raise PORs within One BPM. Track expenses and budgets to stay within the monthly budget. Recruit (Interviews) and train new members in terms of company procedures. Manage budget for spares and consumables Champion CI activities - Energy savings, Kaizens. Stand in and 2IC to the Technical Manager.Job Requirements: N5/ Engineering Diploma/ / Equivalent Engineering Degree an added advantage. Experienced in Maintenance/ Engineering Practices Experience in a supervisory position will be an added advantage 8-10 years experience in Automotive Maintenance Environment Computer literacy is a must.
https://www.jobplacements.com/Jobs/M/Maintenance-Lead-1261066-Job-Search-02-10-2026-04-36-17-AM.asp?sid=gumtree
11d
Job Placements
1
Key ResponsibilitiesSet and optimise injection moulding machines and all related ancillary equipment.Coordinate and supervise production staff during shifts.Ensure production targets are achieved (scrap %, cycle times, output, etc.).Ensure products are manufactured according to schedule and meet customer quality and delivery requirements.Maximise effective utilisation of machinery and personnel.Ensure compliance with Quality Management Systems (QMS) and Environmental Management Systems (EMS).Maintain high housekeeping and safety standards.Drive continuous quality improvement across products and processes.Review non-conforming products with the Quality Department and implement corrective actions.Ensure production work instructions (Setting Sheets, Inspection Instructions, Packaging & Transport specifications) are followed.Assist the Stores Controller when required.Stand in for absent setters when necessary.Be available for overtime and after-hours production support as required.Minimum RequirementsLevel 4 Plastic Federation Injection Moulding Machine Setting Certificate (NQF 6).Minimum 3 years experience in:Injection moulding machine setting and process optimisation.Shift supervisory responsibility.Plastics manufacturing environment.Key CompetenciesStrong problem-solving skills.Ability to work independently with minimal supervision.Leadership and team coordination ability.High attention to detail.Assertive and confident in enforcing quality standards.Strong planning and resource allocation skills.Ability to train and guide production personnel.
https://www.jobplacements.com/Jobs/I/Injection-Moulding-Machine-Setter-1264250-Job-Search-02-19-2026-10-38-00-AM.asp?sid=gumtree
1d
Job Placements
1
Maintenance Lead required for a reputable automotive company based in East London PurposeDirectly oversee Shift Leaders, Store Staff, Clerks, and the Tooling Department to ensure effective maintenance operations and equipment reliability.Key ResponsibilitiesDirectly oversee Shift Leaders, Store Staff, Clerks, and the Tooling DepartmentOversee equipment, tooling, and utilitiesCompile weekly reports, including top downtime, corrective actions, KPIs, and PM adherenceAttend daily Operations meetings to provide feedback on equipment status and action plansAttend daily Scrap/Quality meetings and implement actions to minimize lossesLiaise with Planning to integrate the preventative maintenance plan into the production planCompile monthly departmental KPI reports with ICA / PCA actionsLiaise with suppliers and contractors for planned projects, maintenance, and repairsObtain quotations based on SOWs and raise PORs within One BPMTrack expenses and manage budgets to remain within monthly limitsRecruit (interviews) and train new team members in line with company proceduresManage budgets for spares and consumablesChampion Continuous Improvement initiatives, including energy savings and Kaizen activitiesAct as stand-in and 2IC to the Technical ManagerRequirementsN5 / Engineering Diploma / Equivalent qualificationEngineering Degree will be an added advantage
https://www.jobplacements.com/Jobs/M/Maintenance-Lead-1260834-Job-Search-02-10-2026-01-00-16-AM.asp?sid=gumtree
11d
Job Placements
Ads in other locations
1
1
PURPOSE OF JOB:To manage and ensure stock availability of stock locally/branches and consignment branches at any given time and to ensure technician tools/PPE are fully operating at all timesRESPONSIBILITIESMonitor stock levels monthly in all branches through history reports and usage.Ensure Min/Max is replenished beforehand.Consumables to be up to date and Min/Max adhered to.0% stock losses.Stock adjustments to be done with final necessary Manager approval.POD scanning as per company procedure (POD Department).ALL invoicing ie scrap tyres/PPE/Tools/Consumables.ArchivingEnsure customer tyre queries are actioned and resolved.Grow consignment base with Breakdown Division team.Assist with new breakdown technician on-boarding in conjunction with breakdown team.Find solutions to re-occurring problems.Ensure feedback to line Manager.Breakdown technician weekly vehicle stock checks.Tool maintenance monthly.Monthly all branches stock take deadlines to be met.Be present at once monthly stock take and report to Team Leader and finalize reports on day of stock take.Completed finals to be handed to Manager one week after stock take date for final sign off.Weekly in-house branch 030 local stock takes done and Manager/2IC to sign off (Variances to be actioned)Work hand in hand with client breakdown controllers.Follow company IBT and receiving system between all branches.Stock queries to be escalated immediately for resolve within 72 hours.Stock numbers to be added to all stock tyres.Work alongside Breakdown Division Admin Department for stock needs and or corrections.Ensuring Breakdown Division night store is always clean and neat.Systems to be checked weekly: refer night store/POD/IBT file.Scrap tyre casing book to be done correctly & kept updated.ALL scrap tyres to be moved within a 2-week window from arrival at clients yard date.Scraps: Dumped/Tyres to factory/Tyre back to customer.Tools (new and repairs) invoiced on tool account.Repairs/replacement: 3 quotes and Manager to approve repair or replacement.Tool numbers to be on all tools.Monthly tool stock take to be done.Tool room/Consumable room to be kept neat and in order.Technician PPE to be kept in good order and replaced when necessary to ensure safety and uphold companies good name.Create a daily learning culture when handling queries, issues, and challenges.Ensure a clean work environment and surroundings.Adhoc projects.MINIMUM REQUIREMENTS / QUALIFICATIONS AND/OR EXPERIENCE1. Grade 122. Experience in similar role3. Excellent communication and interpersonal skill
https://www.jobplacements.com/Jobs/B/Breakdown-Division-Stock-Controller-1263504-Job-Search-02-17-2026-23-00-16-PM.asp?sid=gumtree
3d
Job Placements
1
ExperienceMinimum 5 years experience in a manufacturing or mechanical production environmentExperience within high volume or repetitive production environments preferredProven exposure to supervision, shop floor coordination and production controlStrong understanding of Health and Safety legislationFormal schooling / degreeQualification in Operations Management or Production Management - EssentialMechanical Engineering or related technical qualification preferredResponsibilities Execute daily production plans to achieve takt time, throughput, and on-time delivery targets.Supervise operators to maintain continuous flow, balance lines, and minimise stoppages.Monitor performance, cycle times, and bottlenecks, implementing immediate corrective and recovery actions.Drive adherence to standard operating procedures and ensure specialised processes meet specification.Promote Right First Time manufacturing to reduce rework and scrap.Record and analyse production metrics including output, downtime, waste, and labour efficiency.Use data to identify trends, root causes, and support measurable improvements.Maintain accurate system and production records.Enforce quality standards, process discipline, traceability, and labelling requirements.Contain and resolve defects quickly while supporting root cause and corrective actions.Promote a zero-defect culture.Ensure completion of autonomous maintenance checks and support TPM and preventative maintenance.Monitor equipment condition, log breakdowns promptly, and drive improved uptime and OEE.Lead, coach, and develop teams to meet operational standards.Allocate daily tasks, manage attendance and utilisation, and address misconduct or poor performance fairly.Maintain training coverage, competency, and accountability.Ensure material availability and adherence to ERP and works order controls.Manage WIP, scrap, rejects, and stock accuracy to minimise losses.Implement Lean principles, sustain 5S, apply visual management, and eliminate waste.Lead continuous improvement initiatives to raise productivity and reduce cost.Enforce safe working practices, PPE compliance, and legal requirements.Act immediately on hazards and promote a proactive safety culture.Control departmental costs including labour, consumables, scrap, and downtime while maintaining quality standards.
https://www.jobplacements.com/Jobs/P/Production-Supervisor-1262794-Job-Search-02-16-2026-00-00-00-AM.asp?sid=gumtree
3d
Job Placements
1
Location:Cape Town, Western CapeRequirements:Qualifications:Qualification in Operations Management or Production Management EssentialMechanical Engineering or related technical qualification PreferredExperience & Technical Requirements:Minimum 5 years experience in a manufacturing or mechanical production environmentExperience in high-volume or repetitive production environmentsProven experience in production supervision, shop floor coordination, and production controlStrong knowledge of Lean Manufacturing, 5S, TPM (Total Productive Maintenance), and continuous improvement methodologiesExperience with line balancing, capacity planning, and throughput optimisationWorking knowledge of OEE (Overall Equipment Effectiveness) and production performance metricsExperience using ERP systems, works orders, and shop floor systemsStrong understanding of Health and Safety legislation and regulatory complianceKnowledge of inventory management, WIP control, and material flowLanguages:English and AfrikaansKey Responsibilities:Production & Throughput ManagementExecute daily production plans to achieve takt time, output targets, and On-Time Delivery (OTD)Supervise and coordinate operators to ensure continuous production flowPerform line balancing and optimise labour utilisationMonitor cycle times, downtime, bottlenecks, and implement corrective actionsEnsure adherence to Standard Operating Procedures (SOPs)Drive Right First-Time production to minimise scrap and reworkProduction Control & ReportingRecord and analyse production data including output, downtime, scrap, rework, labour efficiencyConduct root cause analysis and implement corrective actionsMaintain accurate production and ERP recordsEscalate deviations and implement recovery plansQuality Assurance & ComplianceEnsure compliance with quality systems and internal proceduresPromote a zero-defect mindsetManage traceability, labelling, and component identificationContain and resolve quality issues promptlyEquipment & Maintenance Co
https://www.jobplacements.com/Jobs/P/Production-Supervisor-1264730-Job-Search-02-20-2026-10-41-00-AM.asp?sid=gumtree
12h
Job Placements
1
Experience RequirementsMinimum of 5 years experience working within a high-volume manufacturing or production environment, demonstrating hands-on involvement in day-to-day operations.At least 2 years experience in a supervisory or leadership role, managing production teams, operators, or artisans.Proven ability to manage and achieve production targets, including output, efficiency, quality, and delivery deadlines.Experience in labour management, including shift planning, workforce allocation, performance monitoring, and discipline where required.Demonstrated capability in managing production workflows, coordinating resources, and ensuring smooth operations across multiple processes or departments.Strong exposure to problem-solving, root cause analysis, and implementation of corrective and preventative actions within a production setting.Formal Education / QualificationsA recognised qualification in Operations Management, Production Management, Manufacturing Management, or Industrial Engineering is essential.Advantageous Qualifications and ExperienceA technical or trade qualification (e.g., mechanical, electrical, or manufacturing-related) will be a strong advantage.Previous experience in press operations, plating processes, or automated manufacturing environments will be highly beneficial.Responsibilities Lead a hands-on shopfloor team to achieve production targets while maintaining safety, quality, cost, and performance standards.Execute daily production plans and ensure required hourly, daily, and weekly outputs are met.Maximize labour and equipment efficiency, remove bottlenecks, and implement recovery actions when performance falls short.Ensure products are manufactured to specification by enforcing the Quality Management System.Prevent defects at source while reducing scrap, rework, and maintaining full traceability.Coordinate closely with Maintenance to reduce downtime, support preventative maintenance, and promote operator care of equipment.Direct, coach, and develop employees while setting clear expectations and performance standards.Manage attendance, discipline, and ensure adequate skills coverage through training and cross-skilling.Maintain accurate control of systems and stock, including work orders, WIP, and ERP data integrity.Drive Lean manufacturing practices through strong housekeeping, 5S, visual management, and elimination of waste.Promote a culture of continuous daily improvement to enhance productivity and reduce cost.Take ownership of key performance outcomes including on-time delivery, output vs plan, OEE, labour productivity, downtime, scrap levels, safety, a
https://www.jobplacements.com/Jobs/P/Production-Line-Supervisor-1262793-Job-Search-02-16-2026-04-19-04-AM.asp?sid=gumtree
5d
Job Placements
1
Monitor, analyse, and control material, labour, and overhead costsMaintain and update Bills of Material (BOMs) and standard costing modelsPrepare cost estimates for new products, projects, and prototypesPerform variance analysis and investigate cost deviationsTrack waste, scrap, and rework costs and support efficiency initiativesAssist with budgeting, pricing support, and contract cost accuracyProvide management with accurate cost reports and actionable insights Skills & Experience: Minimum 5 years experience in a manufacturing cost accounting roleStrong understanding of BOMs and production costingAdvanced MS Excel skillsExperience working with ERP systemsStrong analytical, problem-solving, and communication skillsAbility to work independently and collaboratively in a fast-paced environmentQualification:Degree in Cost Accounting, Management Accounting, OR related qualification. Only South African Residents or individuals with a relevant South African work permit will be considered. Contact Joshua Lawrence on
https://www.jobplacements.com/Jobs/C/Cost-Accountant-1263172-Job-Search-02-17-2026-04-12-04-AM.asp?sid=gumtree
4d
Job Placements
1
1
1
We require Assistant Branch Managers at our various Cape Town Branches:Bofors Circle [Epping]BlackheathMontague GardensPhilippiWettonJob DescriptionThe Assistant Branch Manager focuses on assisting and supporting the Branch Manager with the planning and managing of the branch’s operations and staff.The Assistant Branch Manager, with the guidance of the Branch Manager, is responsible for leading a team to ensure that operational requirements are met. Compliance with the Second-Hand Goods Act, maintaining good customer relations, and acting with integrity are crucial for this role. The Assistant Branch Manager must be able to manage the branch on his / her own if necessary.Responsibilities will include, but are not limited to:Ensuring all operational processes and procedures are strictly followedMaintain good customer relations and ensuring customer satisfactionEnsuring that the scrap metal is purchased at the correct gradeEnsuring records are updated and reconciled accurately for all items purchased and dispatchedEnsuring Company policies and procedures, and health & safety regulations are adhered toLead and supervise a team in order to achieve operational requirementsMotivating staff on a continuous basis.Ensuring that assistants thoroughly inspect scrap to be purchasedEnsuring that the requirements of the Second-hand Goods Act are complied with when buying scrap by accurately recording all information required under the ActFollowing clear and reasonable instructions from managersApplicants must have the following qualifying criteria:Minimum Grade 12 or equivalentComputer proficiency in Microsoft Word, Excel and OutlookGood numeracy skillsGood communication skillsFluent in EnglishAbility to work quickly and under pressureAt least 3-5 years applicable managerial experienceValid driver’s license and own reliable transport Qualifying Attributes:Self-motivated, accurate, goal orientated and attention to detail.Eager to learn and develop.Able to analyse and implement verbal and written instructions.Ability to multi-task and manage a demanding workload in a pressurised environment.Ability to work independently and within a team.Ability to meet deadlines and deliver results (time management).Strong sense of integrity.Job title: Assistant Branch ManagerReporting to: Operations Manager & Branch ManagerJob type: Permanent positionBenefits include:Provident fundMedical aidLife cover at 4 x annual salaryFuneral cover15 x paid leave
https://www.jobplacements.com/Jobs/A/Assistant-Production-Branch-Manager-Cape-Town-1257893-Job-Search-02-02-2026-01-00-15-AM.asp?sid=gumtree
19d
Job Placements
1
Minimum Requirements: Matric CertificateExperience in the manufacturing industry is advantageousPlanning and organizing abilityDuties and Tasks:Assembling components and electrical and electronic systems and positioning, aligning and fastening units to assemblies, sub-assemblies, or frames using hand or power tools, soldering and micro spot-welding equipmentReviewing work orders to determine materials needed and assembly instructions.Recording production and operational data on specified formsOperating wire-coiling machines to wind wire coils used in electrical equipment and components such as registers, transformers, armature wires, electric motors and generators.Inspecting and testing completed components and assemblies to relevant Work Instructions.Other Duties & Responsibilities: Select components as per drawings, job cards and BOM, accompanied by stores staff Assemble components using soldering, hand tools, or resin/ glue/adhesive tapes according to drawings, job cards and BOM. Report discrepancies and scrapped components to the supervisor Properly dispose of waste and material off-cuts Operate machines: coil winders, spot welders and label printers Maintain clean and organized work areas Accurately complete and submit production documents on time Report delays, issues, malfunctions or breakages to the supervisor. https://www.jobplacements.com/Jobs/E/Electrical-Assembly-Worker-1260594-Job-Search-02-09-2026-00-00-00-AM.asp?sid=gumtree
10d
Job Placements
1
Job functions –Primary Responsibilities (May include but not limited to the below) Refurbishing, servicing and cleaning copiers and printers for re-sale.Repairing, servicing and cleaning devices booked into workshop for repairs.Setting up of devices for installations as per requirements.Refurbishing device second hand units to be re-used as AR parts in the service department.At least 10 Refurbs a week subject to availability and business requirements.Stripping and scrapping of returned devices as per technical manager.Online product training and courses as per the technical manager.Ensuring the workshop is neat and clean on a daily basis.
https://www.jobplacements.com/Jobs/W/Workshop-Technician-1257931-Job-Search-02-02-2026-03-00-16-AM.asp?sid=gumtree
19d
Job Placements
1
Requirements:Matric; technical qualification an advantage.13 years manufacturing experience (wire/steel preferred).Basic mechanical understanding.Strong leadership, communication, and reporting skills.Able to work shifts and overtime.Key Responsibilities:Support daily and weekly production planning.Supervise operators and allocate manpower per shift.Monitor machine performance and coordinate basic maintenance.Ensure product quality meets SANS specifications.Maintain safety compliance (guards, PPE, housekeeping).Capture production data (tons, scrap, downtime, efficiency).Drive continuous improvement and assist with problem-solving.
https://www.jobplacements.com/Jobs/J/Junior-Production-Manager-1258278-Job-Search-02-02-2026-10-25-31-AM.asp?sid=gumtree
18d
Job Placements
1
1
Location:Cape Town, Western CapeRequirements:Qualifications:Qualification in Operations Management, Production Management, Manufacturing, or Industrial Engineering EssentialExperience:Minimum 5 years experience in high volume manufacturingMinimum 2 years experience supervising production teamsProven experience managing production targets, labour planning, and workflow controlTechnical or trade qualification - AdvantageousExperience in press, plating, or automated manufacturing environments - AdvantageousTechnical Knowledge & Skills:Strong understanding of production planning, workflow control, and throughput optimisationKnowledge of OEE (Overall Equipment Effectiveness) and efficiency improvementExperience working with ERP systems and production reporting systemsUnderstanding of ISO 9001 (Quality Management) and ISO 45001 (Occupational Health & Safety) complianceSound knowledge of Lean Manufacturing principles, 5S, and waste reductionStrong understanding of health and safety regulationsKey Responsibilities:Production Performance & Target AchievementExecute daily production plans to meet hourly, daily, and weekly output targetsMonitor line performance and implement immediate corrective actionIdentify bottlenecks and optimise labour and equipment utilisationDrive recovery plans when production targets are missedEnsure correct staffing levels and shift coverageRecord and report accurate production dataQuality Assurance & ISO ComplianceEnsure components are produced to specification first timeEnforce compliance with the Quality Management SystemStop defects at source and drive root cause analysisManage scrap reduction and rework controlEnsure proper identification, labelling, and traceabilityMaintenance & Equipment ReliabilityEnsure operator care and basic machine maintenance is completedReport breakdowns immediately and coordinate with MaintenanceSupport TPM (Total Productive Maintenance) and preventative maintenance activitiesMinimise downtime and improve equipment efficiencyStaff Supervision & DisciplineLead, direct, and supervise operators and team membersSet daily performance standards and expectationsCoach, train
https://www.jobplacements.com/Jobs/P/Production-Line-Supervisor-1264731-Job-Search-02-20-2026-10-41-00-AM.asp?sid=gumtree
12h
Job Placements
1
1
The Ductshop Supervisor is responsible for overseeing the daily operations of the ducting manufacturing facility to ensure production targets are achieved efficiently, safely, and in accordance with quality standards. The role provides hands-on leadership on the production floor, co-ordinates workflow and production schedules, ensures equipment functionality, enforces quality and safety standards, and drives productivity while minimizing operational costs and material waste.Minimum requirements:Minimum 510 years experience in sheet metal or steel fabrication.Proven supervisory or team leadership experience in a workshop environment.Strong knowledge of MIG/TIG welding and fabrication processes.Experience operating CNC machinery (plasma cutter, press brake, guillotine).Ability to read and interpret engineering drawings and CAD designs.Grade 12 (Matric) required.Red Seal Boilermaker or Technical Diploma (advantageous).Salary offer: R25K R35KGeneral competencies:Strong leadership and team management capability.Effective problem-solving and decision-making skills.Excellent verbal and written communication skills.High attention to detail and commitment to quality standards.Ability to work under pressure and meet production deadlines.Key responsibilities:Production & Operations Management:Supervise daily sheet metal fabrication activities to ensure production targets are met.Plan and co-ordinate workflow, allocating tasks to artisans and machine operators.Interpret technical drawings, blueprints, and CAD designs accurately.Oversee fabrication processes including CNC plasma cutting, press brake bending, guillotining, and welding.Monitor production output and resolve operational bottlenecks.Quality Control & Compliance:Ensure all work meets required quality standards and project specifications.Implement and enforce ISO quality control procedures.Conduct routine inspections and quality checks on finished products.Maintain compliance with Occupational Health and Safety (OHS) regulations.Team Leadership & Performance Management:Lead, train, and mentor workshop staff to improve productivity and technical competence.Manage employee performance, discipline, and team development.Foster a safe, disciplined, and high-performance workshop culture.Materials & Cost Control:Estimate material requirements for projects and ensure material availability.Monitor material usage and control scrap levels to minimize waste.Contribute to cost reduction and process improvement initiatives.Equipment & Maintenance:Oversee preventative maintenance schedules.Ensure proper use, care, an
https://www.jobplacements.com/Jobs/D/Ductshop-Supervisor--HVAC-Industry--Kempton-Park-1263917-Job-Search-2-19-2026-2-42-46-AM.asp?sid=gumtree
2d
Job Placements
Save this search and get notified
when new items are posted!