Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for no experiance in Engineering & Architecture jobs in Durban
2
SavedSave
I am a turner machinist/toolmaker with 14years of work experience looking for a job asap.I have vast experience in conventional lathe,milling,drilling,radial arm and cylindrical grinding machines.I also have experience in fanuc control cnc lathe machines.I can do manual programming and setting.I can work to fine tolerances(0.01mm) and can work under pressure.If interested please call Mike on 0837292146,thank you.
13h
1
Thekwini TVET College invites suitably qualified and experienced individuals to apply for the following permanent posts based in Durban:
*SENIOR LECTURER: CIVIL ENGINEERING (PL2) X1*
*PERMANENT*
*CAMPUS: MELBOURNE *
* REF: MEL 01/03/2022*
* NOTCH: R353 979.00 PA*
* Matric certificate or equivalent
* A relevant recognized tertiary qualification in Civil Engineering (REQV 13)
* Teaching qualification in secondary/higher school
* Valid SACE registration
* Minimum of three (3) years lecturing experience at a TVET College
* Sound civil engineering subjects knowledge and work-related applications
* Computer literacy (Ms Office)
* Knowledge of examination and assessment policies
* Knowledge of the CAP and Coltech systems
* Leadership and management skills, good communication skills and interpersonal skills, passion for learning and teaching as well as good record keeping and administrative skills
* Ability to plan ahead and apply good time management skills
* Problem solving skills
* Organization skills to ensure effective quality teaching and learning
* Be able to make decisions on operational matters and implementation
* Driver’s licence
* Be a subject advisor
* Facilitate subject allocation and time tabling
* Supervise lecturers in the campus and manage their performance in terms of IQMS
* Coordinate assessment and moderation in the campus
* Develop strategies to enhance student performance and good results
* Monitor and manage student attendance and upload attendance
* Manage and supervise assessment and examination process in the section including timeous marking and moderation of question papers, preparation of ISAT and ICASS activities
* Monitor Lecturer performance
* Conduct classroom visits
* Advise campus management regarding the allocation of work amongst staff
* Maintain a comprehensive and up to date record of staff
* Ensure POA’s and POE’s are done timeously
* Monitor teaching and learning through LMS
* Enhance administration efficiency within the campus and college
* Member of campus management team and relevant committees
* Coordinate Health, Safety and wellness programmes on campus
* Assist with daily running of the campus.
*CLOSING DATE: TUESDAY, 25 March 2022,*
*TO BE INCLUDED IN THE APPLICATION:*
* Applications must be submitted on the prescribed Z83 (obtainable from any Public Service Department or on the internet at ((www.gov.za/document)(http://www.gov.za/document)), which must be completed in full, originally signed and dated by the applicant
* Applications must be accompanied by a covering letter clearly indicating experience in the post applying for, a detailed Curriculum Vitae *indicating subjects and level(s) taught*
* Copies of Qualifications and *Academic Record indicating subjects passed*, Identity Document, Valid SACE Registration and Drivers Licence (where applicable)
* A copy of the SAQA certificate of verification of
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI1NjU2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1190033&xid=1555_25656
2y
1
Thekwini TVET College invites suitably qualified and experienced officials to apply for the following contract post:
*HEAD OF DIVISION: ENGINEERING STUDIES (PL3) X1*
*PERMANENT*
*CAMPUS: SPRINGFIELD *
*REF: SPR 04/03/2022*
*NOTCH: R421 473.00 PA*
* Matric certificate or equivalent
* A recognized tertiary qualification in Mechanical Engineering (REQV 13)
* Teaching qualification in secondary/higher
* Valid SACE registration
* Minimum of three (3) years teaching/lecturing experience at a TVET College
* Minimum two (2) years’ management experience in a TVET College
* Sound engineering subjects knowledge and work-related applications
* Computer literacy (Ms Office)
* Knowledge of examination and assessment policies
* Knowledge of the CAP and Coltech systems
* Leadership and management skills, good communication skills and interpersonal skills, passion for learning and teaching as well as good record keeping and administrative skills
* Ability to plan ahead and apply good time management skills
* Problem solving skills
* Organization skills to ensure effective quality teaching and learning
* Be able to make decisions on operational matters and implementation
* Driver’s licence
* Deputize the Campus Manager in managing the campus and promoting the education of students in a proper manner
* Maintain a total awareness of the administrative procedures across the entire range of campus activities and functions
* Engage in class teaching as per workload of the relevant post and campus needs
* Monitor and advise on curriculum delivery of programmes offered in the Campus
* Review PQM regularly
* Monitor teaching and learning through LMS
* Manage and supervise enrolment , assessment and examination processes
* ISAT and ICASS coordination
* Generate staff and student report of attendance and performance
* Assist the Campus in overseeing student welfare
* Guide and supervise the work and performance of staff
* Compile report to the Campus Manager
* Manage and facilitate student work based experience and lecturer workplace integrated learning.
*CLOSING DATE: FRIDAY, 25 March 2022,*
*TO BE INCLUDED IN THE APPLICATION:*
* Applications must be submitted on the prescribed Z83 (obtainable from any Public Service Department or on the internet at ((www.gov.za/document)(http://www.gov.za/document)), which must be completed in full, originally signed and dated by the applicant
* Applications must be accompanied by a covering letter clearly indicating experience in the post applying for, a detailed Curriculum Vitae *indicating subjects and level(s) taught*
* Copies of Qualifications and *Academic Record indicating subjects passed*, Identity Document, Valid SACE registration and Drivers Licence (where applicable)
* A copy of the SAQA certificate of verification of qualifications must be attached for all foreign qualifications
* Assist with daily running of the campus
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI1NzMyX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1190076&xid=1555_25732
2y
1
Architect or Architectural Technologist to join our team. The ideal candidate will have a minimum of 2 years of construction site experience, along with proficiency in construction documentation and software, specifically ArchiCAD. This position requires heavy lifting and general work, as well as extensive travel all over South Africa, including overnight stays and long-distance travel. Therefore, candidates must possess their own vehicle.Responsibilities:Must be proficient in ArchiCAD as well as the OFFICE SUITE software.Conduct on-site assessments and provide technical support during the construction phase.Collaborate with project teams to ensure designs meet client requirements and adhere to regulatory standards.Basic project admin work.Project management skills, including scheduling and budgeting not required but will be advantageous.RequirementsMinimum of 2 years of construction site experience.Strong understanding of construction documentation.Must have own vehicle.Registration with SACAP (South African Council for the Architectural Profession) or any other professional body.Excellent communication and teamwork skills. Able to work and collaborate with other built environment professionals. Kindly Send your CV via WhatsApp to the number provided. Only those who qualify will be contacted back.
3d
VERIFIED
SavedSave
STRUCTURAL TECHNOLOGIST REQUIRED
Description: Civil & Structural Consulting Engineering company
based in Durban is looking for a Structural Technologist
Minimum requirements: B-Tech Civil Engineering
5 years’ experience in Reinforced Concrete and Structural
Steel designs of Residence and Commercial Buildings.
Knowledge of AutoCad, Prokon & Revit
Code 8 Drivers license and own reliable transport
Email detailed CV to info@constavia.co.za
3d
1
An exciting opportunity is available with our client in the Pinetown area for a Senior Electroplating Process Engineer, to manage the Quality and Quantity of plated parts per plant according to stock level and customer requirements.
Manage associates reporting to the Plating Process Engineer.Ensure records of equipment daily readiness results are tracked and stored securely.Ensure records of daily additions are recorded and stored securelyEnsure housekeeping of high standard in the lab, plant, stores.Always wear PPE and ensure safety first.
Ensure Plating Plants daily performance is above min requirement of 85%Ensure Plating Plants daily 1st Time Buy-off is above min requirement of 95%Compile stock reports and circulate daily .Review and update PCD’s (FMEA, CP, PFC ) together with the team if and when requiredOversee and contribute to process related corrective actions and G8D’s/ FTR’sDevelop programs and coordinate trials for new projects until production readinessEngage in Kaizen Activities and establish Capex-requirementsKeep all records up to date, update graphs.Maintain good housekeeping in all areas, consistently.Adhere to safety rules and regulations, ensure you wear the required PPE.Engage in Kaizen Activities and establish Capex-requirements
Daily production plans and ensure actual loading is in line with planned loadingPart availability for timeous shipment to customers including correct booking of parts against actual WO’sAvailability of Raw stock/ Chemicals & Auxiliaries in line with production planning, report shortagesCompilation of Quality reports (daily, weekly, monthly) and circulateOversee upkeep of equipment required for plating and inspectionSufficient manpower planning (incl Overtime sheets) for weekly tank maintenanceThickness and step testing is done daily as required, immediately reporting out of control situationsDevelop and maintain a plating jig program, ensuring availability of sufficient number of jigsStrict adherence to approved BudgetMaintain good housekeeping (4S) in all areas, consistently.Perform any reasonable task as required by the manager
Bsc Degree in chemical engineeringChemical/analytical diploma, experience, including chemical maintenance of electrolytes.Minimum Experience: 3-5 Years in the chemical analytical industry.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMTgyOTM1MjI3P3NvdXJjZT1ndW10cmVl&jid=1057585&xid=1182935227
3d
1
SavedSave
Position: Design Engineer
Location: Pinetown, Durban
Reports To: Engineering & Business Development Executive
Purpose of the Role:
Support of production engineering for maximization of efficiency and process uptime.To ensure hand overs of products, processes and documentation to production are conducted adequately communicating all critical characteristics and quality information appropriately.New product development to meet customer specification and comply with both internal and external systems requirements within the agreed upon timeline.
Minimum Qualifications Criteria:
BTech in Mechanical Engineering5 years relevant work experienceKnowledge and experience with IATF Core Tools
Skills
Competent in using Microsoft Office programsCompetent in using 3D CAD Modeling SoftwareBasic manufacturing process knowledge & experience, i.e. CNC Tube & Plate bending, Laser cutting, robotics (welding, plasma cutting, polishing).Basic skills in Project Management is a requirement
Primary Duties
Product EngineeringProcess EngineeringProject ManagementProblem Investigation
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80MTE3NjI0MjQyP3NvdXJjZT1ndW10cmVl&jid=1194900&xid=4117624242
3d
1
SavedSave
*Reference: MP005562-HM-1*
Our client in the gaming industry is looking for a Junior Field Technician based in Durban to join their technical department team.
**Minimum requirements:
**
* Grade 12
* Minimum N3 Electrical / Electronic Engineering
* Valid drivers license
* Minimum 2 years experience in a similar role
* English with a regional language would be advantageous
* The ability to maintain excellent quality standards and service levels
**
** *Consultant: Hazel Mnisi - Dante Personnel Recruitment – Nelspruit Branch*
*Apply via our website *(www.dantesa.co.za)(http://www.dantesa.co.za)* /* *MP005562*
* *
* If you don’t hear from us within the next 5 days, please accept that your application was unsuccessful.*
* *
R 10 800
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzM5MjMxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1231873&xid=1555_39231
2y
1
SavedSave
A self-confident and energetic individual is needed in Durban to expand their client base. They must be sales-driven and have a track record of exceeding targets consistently. The individual needs to be customer-centric and focused on building strong relationships with customers and must possess a technical qualification or background in electrical or mechanical engineering
• Implementation of 80/20 initiatives to drive sustainable growth and margin with key customers.
• Develop clear and effective written proposals/quotations for current and prospective customers.
• Expedite the resolution of customer problems and complaints.
• Coordinate sales effort with marketing, sales management, accounting, logistics and technical service groups.
• Create and manages a customer value plan for existing customers highlighting profile, share and value opportunities.
• Negotiate TCO (Total Cost of Ownership) initiatives & contracts.
• Identify advantages and compare organization’s product/services.
• Plan and organize personal sales strategy by maximizing the return of time investment for the territory/segment
• Minimum Qualification – Matric – Technical and or Mechanical qualification is seen as an added advantage
• Must possess at least 2+Years’ sales / account management experience in the Electrical/Mechanical sector.
• Minimum Qualification – Matric – Technical and or Mechanical qualification is seen as an added advantage
• Must possess at least 2+Years’ sales / account management experience in the Electrical/Mechanical sector.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzM3NDk4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1231421&xid=1555_37498
2y
1
*Well established Engineering company situated in Umboginitwini, south of Durban seeks a Mechanical Fitter with at least 5 years experience as a qualified Mechanical Fitter/Millwright.*
*Automotive industry is an advantage*
*Experience on mechanical presses and rotating equipment and PLC experience is essential*
* Fault finding and problem solving during equipment breakdowns.
* Preventative maintenance on machinery.
* Install and repair various types of mechanical equipment.
* Complete job cards and time sheets.
* Manage critical spares.
* Matric Certificate.
* Trade Tested fitter/millwright.
* At least 5 years as a qualified Mechanical Fitter/Millwright (in the automotive industry would be an added advantage).
* *Experience on mechanical presses and rotating equipment is essential*
* Millwright with PLC experience will be an added advantage.
* Strong technical skills.
* Good communication skills.
* Problem-solving skills.
* Understanding production equipment and processes.
Competitive salary plus benefits
Please note that only suitably qualified candidates will be contacted.
If you have had no response within 2 weeks your application was unsuccessful
* Matric Certificate.
* Trade Tested fitter/millwright.
* At least 5 years as a qualified Mechanical Fitter/Millwright (in the automotive industry would be an added advantage).
* *Experience on mechanical presses and rotating equipment is essential*
* Millwright with PLC experience will be an added advantage.
* Strong technical skills.
* Good communication skills.
* Problem-solving skills.
* Understanding production equipment and processes.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI0NzUwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1185927&xid=1555_24750
2y
SavedSave
Position
available for a Candidate Quantity Surveyor for a one year contract to be based
in Pinetown, Durban.
Minimum
requirements:
- B tech
or B Sc QS
- Must
have valid drivers licence and own transport
- 2 years
consulting experience
Please
forward CV to reception@rovert.co.za
9d
SavedSave
A well established casket manufacturing company based in Industrial Park , Phoenix seeks to employ a qualified, experienced Turning & Milling General Worker with extensive experience in metal fabrication and knowledge andoperating of power tools.Educational & Job RequirementsMatricTurning & Milling qualificationAttention to detailAbility to work without supervisionGood communication skills(Verbal & Written)Good decision making skillsExcellent timekeeping & ability to meet deadlinesFast learnerTeam player.Should you meet the above job requirements please forward your cv to : recruitmenhr508@gmail.com
10d
1
Our client in Durban is looking for an Electronic Workshop Technician for a 1 year Intern programme.
Candidates must have completed P2 training and looking for experience. Must have Electronics N6 or clinical engineering qualification.
repairs and servicing of equipment.
Full Electrical/electronics training.
Matric
Clinical engineering OR N6 electrical/electronic qualification
Must have completed P2 Training
R8-10K CTC
Matric
Clinical engineering OR N6 electrical/electronic qualification
Must have completed P2 Training
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzIyNzI5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1179510&xid=1555_22729
2y
1
SavedSave
Valvemech’s core business is the reconditioning, manufacturing, modification and testing of industrial-purpose valve fittings
The main responsibilities of the position are to:
* Manage production workflow
* Manage production and resources
* Manage equipment and vehicles
* Manage production department
* Liaise with customers
*Qualifications:*
* Matric
* Degree or National Diploma in Production or Engineering
*Experience*
* At least 5 years of relevant technical experience
* Experience working in an engineering environment, including a machine shop
* Experience with manufacturing, modifying, maintaining and repairing of valves
* At least 5 years Management experience
*Technical Skills*
* Computer Literacy (MS Office)
*Knowledge*
* Good understanding of production best practices especially turning, machining and fitting
* Knowledge of valve repair and fabrication beneficial
* ISO 9002
* In depth understanding of the Occupational Health and Safety Act
* Good understanding of the Basic Conditions of Employment Act
*Behavioural Attributes:*
* Excellent communication and interpersonal skills
* Customer Focus including the ability to build relationships
* Initiative
* Integrity
* Planning and organising
* A cost-to-company package that includes company contribution to provident fund and medical aid.
* Use of a company vehicle
* Fuel allowance
*Qualifications:*
* Matric
* Degree or National Diploma in Production or Engineering
*Experience*
* At least 5 years of relevant technical experience
* Experience working in an engineering environment, including a machine shop
* Experience with manufacturing, modifying, maintaining and repairing of valves
* At least 5 years Management experience
*Technical Skills*
* Computer Literacy (MS Office)
*Knowledge*
* Good understanding of production best practices especially turning, machining and fitting
* Knowledge of valve repair and fabrication beneficial
* ISO 9002
* In depth understanding of the Occupational Health and Safety Act
* Good understanding of the Basic Conditions of Employment Act
*Behavioural Attributes:*
* Excellent communication and interpersonal skills
* Customer Focus including the ability to build relationships
* Initiative
* Integrity
* Planning and organising
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzMxNzA5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1206805&xid=1555_31709
2y
1
Responsible for business development, driving sales and profitability in the waste / waste water / water treatment sectors
Develop a strategy focused on financial gain and customer satisfaction
Lead and coordinate meetings with prospective clients
Promote the company’s products / services
Handle client objectives / challenges
Build long-term relationships with customers
Build strong relationships with route to market partners
Define and manage a sales pipeline that meets / exceeds target
Responsible for sales orders and order related margins
Grow existing customer base
Liaise with the Tendering Team to ensure that proposals are profitable, sustainable, and competitive
Negotiate with the customers
Presentation of Tenders to the customer
Manage all commercial / contractual matters at tender, bid clarification, and negotiation stages
Gather information on future projects
Conduct plant surveys with the technical team
Attend sales and budget meetings
Manage all clients, sales, and leads on the CRM system
Develop sales and marketing strategies
National Diploma / Degree in Engineering or equivalent
7 – 10 years sales experience in the water / waste water treatment industry
Water treatment product knowledge
National Diploma / Degree in Engineering or equivalent
7 – 10 years sales experience in the water / waste water treatment industry
Water treatment product knowledge
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzIxNzE3X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1176775&xid=1555_21717
2y
1
SavedSave
Architectural Draftsman - DurbanAdvert Ref: VC0220Job Title: Architectural DraftsmanArea: Engineering DepartmentPosition Type: Full-TimeWeekly Hours: 40 HoursTime Conditions: Day ShiftSalary: R21,000 - R34,000Closing Date: 28 March 2022Architectural Draftsman Job PurposeWe are looking for a detail-oriented architectural draftsman to join our architectural design team. You will be creating technical drawings for homes, commercial buildings, and other structures from architects sketches, incorporating exact measurements and codes, and entering data to generate 3-D design models.To be successful as an architectural draftsman you should possess solid knowledge of computer-aided design (CAD) software, and the ability to apply the fundamentals of sketching and design. A top-notch architectural draftsman will be someone whose drafting expertise contributes to structurally sound and aesthetically pleasing architectural designs.Architectural Draftsman Responsibilities:• Analyzing building specifications, codes, and sites.• Creating technical drawings from architects sketches and specifications.• Using CAD software to create drawings that incorporate exact measurements, calculations, building codes, and other construction details.• Printing CAD drawing schematics for use by architects, construction managers, and structural and maintenance engineers.• Entering CAD data into building information modeling (BIM) systems to create 3-D models and renderings.• Preparing drawings, charts, and records with CAD equipment and conventional drafting techniques.• Visiting construction sites to perform measurements and calculate dimensions as needed.• Collaborating with architects and construction engineers to ensure adherence to building specifications and industry regulations.• Keeping abreast of the latest developments and technologies in architectural design.Architectural Draftsman Requirements:• An Associate’s degree or certification program in architectural drafting, or similar.• American Design Drafting Association (ADDA) certification preferred.• Prior experience as an architectural draftsman will be advantageous.• Advanced proficiency in computer-aided design (CAD) software.• In-depth knowledge of building design, specifications, codes, and structural analysis.• Ability to apply the fundamentals of sketching and design.• Mathematical aptitude and attention to detail.• Strong organizational and time management abilities.• Great analytical, problem-solving, and communication skills.Interested Applicants who meet the requirements may apply here or on our website. Applicants will be inducted shortly, Should you not be contacted in 14 days of your application, Please consider your application unsuccessful and thank you for your interest in our construction company.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzUzMDAxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1199153&xid=1266_53001
2y
1
SavedSave
*Reference: KZN000204-Teags-1*
Company based in Pinetown is looking for an Internal Sales Representative to join their team.
*Duties & Responsibilities :*
* Cold Calling and New Business acquisition
* Maintenance and growth of existing client base
* Finding of non stock items to service client base
* Full account monitoring and servicing from enquiry to delivery to account payment
* Following Market trends, pricing and movement
* Meeting targets and growing portfolio
*Desired Experience, Qualification, Skills & Knowledge:*
* Sales
* Construction & Heavy Engineering Industry
* Sales Ability & Information probing
* Strong Personality and people skills
* Friendly, Humble & Approachable
* Syspro or similar experience beneficial
* Draughting experience beneficial
R Monthly
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzIzMjk0X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1181885&xid=1555_23294
2y
1
SavedSave
*Our Marine Services Client in Durban is looking for an experienced Safety Equipment Technician.*
*Responsible for:*
* Being proactive with recommendations regarding service techniques and HSE issues
* Ensuring your training certification is up to date
* Maintaining equipment in the service station
* Travel both locally in South Africa as well as internationally to attend services and training courses.
* Completing service reports and assisting the service coordinators by providing necessary information on spares and repairs required.
* Servicing and testing of marine lifesaving equipment including firefighting equipment/liferafts/lifeboats and davit systems and general lifesaving appliances.
*Experience Required*
* Working knowledge of Microsoft Excel and Word
* Command of the English language
* Valid passport (Advantage)
* Valid South African drivers’ licence
* SAQCC Fire training will be an advantage
* Hydraulic experience will be beneficial
* Technical training on marine crane systems will be an advantage
*NB: *
Training will be provided by the company both internally and through 3rd party training providers. The position will suit a person who is confident in their abilities to carry out their workload and has good communication skills
*Experience Required*
* Working knowledge of Microsoft Excel and Word
* Command of the English language
* Valid passport (Advantage)
* Valid South African drivers’ licence
* SAQCC Fire training will be an advantage
* Hydraulic experience will be beneficial
* Technical training on marine crane systems will be an advantage
*NB: *
Training will be provided by the company both internally and through 3rd party training providers. The position will suit a person who is confident in their abilities to carry out their workload and has good communication skills
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI4NjA5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1198034&xid=1555_28609
2y
1
Say goodbye to unemployment with Tumaini Consulting!
My client is a mechanical, electrical, fire and wet services consulting engineering firm. They provide innovative (HVAC/Fire/Wet/Energy Efficiency/Water Efficiency) designs and sustainable solutions that meet or exceed the expectations of their clients at the lowest life cycle cost within the agreed time, quality and budget constraints.
Duties & Responsibilities
* Produce concept, tender and technical mechanical engineering drawing for commercial buildings, hospitals, data centres etc.
* Building service experience will be an advantage.
* Revit MEP Certification required
Benefits include:
* Pension
* Group Life
* Performance Bonus
* Package Structuring
Should you meet the minimum requirements for this position, please email your updated CV attached to (Email Address Removed) , alternatively contact the team on (Phone Number Removed); or visit our website, (URL Removed)
Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful.
*Desired Skills: *
* Technical Drawing
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU0XzgzMDVfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1175271&xid=1554_8305
2y
1
SavedSave
Are you an Electronic Engineer looking for the next step in your career?
Our client is looking for an Electronic Engineer to join their team in Durban as soon as possible. You will be required to design, develop, and test components, devices, systems, or equipment that use electricity as part of their source of power. The successful candidate must have a systematic and analytical approach to problem solving and contribute to good development standards and principles.
Requirements:
- Bachelors in Electronic Engineering OR Computer Engineering
- 0-3 Years’ experience in Firmware and Hardware
- Very strong academic record
- Dean’s list, Golden Key member, or have graduated with distinctions will be advantageous
- Good C programming experience
- Experience in, or be passionate about AI, Angular etc.
If you are interested in this role or any other roles, please send your CV and your academic records to (bvanheerden@lwri.co.za)()
We are looking forward to assisting you with your next opportunity!
See Description
See Description
See Description
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI1NzI4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1190072&xid=1555_25728
2y
Save this search and get notified
when new items are posted!
