Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Home & Garden
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Results for Tanks & Water Storage Tanks in Mbombela / Nelspruit in Mbombela / Nelspruit
1
R 4,874
SavedSave
Please note that shipping and installation is not included.First thing to remember is the DAB nova for salt water 0.2kW a multi-
purpose submersible pump specifically constructed for use in salt
water. Furthermore anti-corrosive and rust-proof materials. As well as
motor casing, shaft, screws and nuts made of stainless steel AISI 316.
The pumps are designed to pump clean water or water containing solids
with a diameter from 5 to 10 mm.
Cable with tin plated conductors. Motor with thermic overload
protection. Wear resistant shaft and impeller. Excellent cooling of the
motor that enables the pump to operate even when it is partially
submersible. Manual and automatic version with start/stop float switch.
Supplied with power cable with plug and self-sealing fitting.
Technical Data of the DAB nova for salt water 0.2kW
Operating range: from 1 to 7.5 m3/h with head up to 6 meters.
Liquid temperature range: from 0 °C to +35 °C for domestic use.
Pumped liquid: dirty water, without fiber, including salt water.
Max. immersion depth: 7 meters.
Power input: 1 x 230 V
Application
The vertical delivery draining submersible pump has been specifically
built for draining applications in salt water installations. It may
also be used as a portable pump in emergency situations. The built-in
float level switch, in the automatic version, allows fixed installation,
ensuring automatic operation.
Construction features of the pump
Hydro resistant techno polymer pump body, cover, and suction grid.
AISI 316 stainless steel motor, rotor shaft, and bolts and screws.
Cable with tin plated conductors.
Construction features of the motorFinally submersible type continuous duty asynchronous motor. Thermal overheating protection.
1mo
Mbombela / Nelspruit
1
R 34,282.99
SavedSave
Please note that shipping and installation is not included.
1mo
Mbombela / Nelspruit
1
R 32,284
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 2.2kW – three phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time) Flanged and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 2.2kW – three phase with shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
1mo
Mbombela / Nelspruit
1
R 32,907
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 1.5kW – three phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time) Flanged and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 1.5kW – three phase ith shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
1mo
Mbombela / Nelspruit
1
R 32,768
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 1.5kW – three phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time) Flanged and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 \ ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 1.5kW – three phase ith shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
1mo
Mbombela / Nelspruit
1
R 29,744
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 1.1kW – three phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time)Flange and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 1.1kW – three phase with shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.
Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
1mo
Mbombela / Nelspruit
1
R 34,823
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 1.5kW – single phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time) Flanged and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 1.5kW – single phase with shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
1mo
Mbombela / Nelspruit
1
R 29,744
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 1.1kW – single phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time)Flange and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 1.1kW – single phase with shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
1mo
Mbombela / Nelspruit
1
R 27,226
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 0.7kW – single phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time) Flanged and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 0.7kW – single phase with shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
1mo
Mbombela / Nelspruit
1
R 1,698
SavedSave
Please note that shipping and installation is not included.Peripheral centrifugal pump with compact dimensions. capable to
generate high heads and suitable for domestic installations, water
supply systems, small gardening applications, draining and filling
cisterns, and for small industrial uses such as feeding pressurized
boilers (anti-condensation).
Operating range: from 5 to 50 l/m with head up to 84 meters.
Brass pump body and motor support for KP 60/6 and KP 60/12. Cast iron
pump body with radial suction for KP and KPS, frontal suction for KPF.
Brass impeller. Carbon/ceramic mechanical seal. IP44.
Liquid temperature range: from 0 °C to +35 °C for domestic use, from -10°C to +50°C for other uses.
Type: Peripheral
Discover the DAB KPF Peripheral centrifugal pump 0.37kW: A powerful
and durable solution for precise irrigation. With a 0.37 kW motor and
230 V voltage, it efficiently delivers water over long distances. Its
corrosion-resistant design ensures longevity, making it suitable for
agricultural, orchard, greenhouse, landscaping, and residential
irrigation. Installation is straightforward, and it’s easy to monitor.
Elevate your irrigation with your reliable partner for optimal water
distribution.
CONSTRUCTION FEATURES OF THE PUMP
Brass pump body and motor support for KP 60/6 and KP 60/12. Pump body
with radial suction for KP and KPS; front suction for KPF. Cast iron
support with brass wear disc for KPS 30/16 and KP 38/18. KPS 30/16 is
available on request with bronze pump body and support. Brass impeller.
Carbon/ceramic mechanical seal
CONSTRUCTION FEATURES OF THE MOTORClosed asynchronous type, external ventilation cooling. Rotor running
on permanently lubricated ball bearings, oversized to ensure low noise
and durability. Standard built-in therm-amperometric protection.
Capacitor permanently fitted on single phase versions. For the
protection of the three-phase motor, we recommend the use of remote
overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
1mo
Mbombela / Nelspruit
1
Contact f/price
SavedSave
Please note that shipping and installation is not included.DAB jet self-priming composite pump 1kW – single phase Technical Data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 1kW – single phase :
Pump body in technocpolymer and motor support in die cast aluminium.Impeller, diffuser, venturi tube and sand guard in technopolymerStainless steel wear ring.Carbon/ceramic mechanical seal.
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations.Suitable for small farms and gardening, small scale industrial services and where self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated thermo-amperometric protection and
permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41)
1mo
Mbombela / Nelspruit
1
R 5,089
SavedSave
Please note that shipping and installation is not included.DAB jet self-priming composite pump 0.75kW – single phase Technical Data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 0.75kW – single phase:
Pump body in technocpolymer and motor support in die cast aluminium.Impeller, diffuser, venturi tube and sand guard in technopolymerStainless steel wear ring.Carbon/ceramic mechanical seal.
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations. Suitable for
small farms and gardening, small scale industrial services and where
self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated thermo-amperometric protection and
permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41)
1mo
Mbombela / Nelspruit
1
R 3,128
SavedSave
Please note that shipping and installation is not included.DAB jet self-priming composite pump 0.75kW – single phase Technical Data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 0.75kW – single phase:
Pump body in technocpolymer and motor support in die cast aluminium.Impeller, diffuser, venturi tube and sand guard in technopolymerStainless steel wear ring.Carbon/ceramic mechanical seal.Inlet: 1″Outlet: 1″
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations. Suitable for
small farms and gardening, small scale industrial services and where
self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated thermo-amperometric protection and
permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41)
1mo
Mbombela / Nelspruit
1
R 4,456
SavedSave
Please note that shipping and installation is not included.DAB jet self-priming composite pump 0.44kW – single phase Technical Data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 0.44kW – single phase:
Pump body in technocpolymer and motor support in die cast aluminium.Impeller, diffuser, venturi tube and sand guard in technopolymerStainless steel wear ring.Carbon/ceramic mechanical seal.
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations. Suitable for
small farms and gardening, small scale industrial services and where
self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated thermo-amperometric protection and
permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41)
1mo
Mbombela / Nelspruit
1
R 3,524
SavedSave
Please note that shipping and installation is not included.Technical data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallized and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 0,6kW– single phase:
Pump body in techno polymer and motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical seal.
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations. Suitable for
small farms and gardening, small scale industrial services and where
self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated therno ampero metric protection
and permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41)
1mo
Mbombela / Nelspruit
1
R 5,778
SavedSave
Please note that shipping and installation is not included.DAB jet self-priming composite pump 0.75kW – three phase Technical Data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 0.75kW – three phase:
Pump body in technocpolymer and motor support in die cast aluminium.Impeller, diffuser, venturi tube and sand guard in technopolymerStainless steel wear ring.Carbon/ceramic mechanical seal.Inlet: 1″Outlet: 1″
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations. Suitable for
small farms and gardening, small scale industrial services and where
self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated thermo-amperometric protection and
permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41)
1mo
Mbombela / Nelspruit
1
R 12,332
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 2.2kW – three phase
with excellent suction capacity even in the presence of air bubbles.
Important to realize it is suitable for pumping water with low levels of
sandy impurities. Especially used in domestic water supply
installations.
Afterwards it is suitable for small farms and gardening, small scale
industrial services and where self priming is necessary. For the purpose
of complete of ejector and diffuser for high priming capability.
Suitable for sucking from well up to 9 meter, provided in 3 different
material pump body: cast-iron, stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 2.2kW – three phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical sealInlet: 1″Outlet: 1″
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
1mo
Mbombela / Nelspruit
1
R 6,583
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 1kW – three phase
with excellent suction capacity even in the presence of air bubbles.
Suitable for pumping water with low levels of sandy impurities.
Especially used in domestic water supply installations.
Suitable for small farms and gardening, small scale industrial
services and where self priming is necessary. Complete of ejector and
diffuser for high priming capability. Suitable for sucking from well up
to 9 meter, provided in 3 different material pump body: cast-iron,
stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 1kW – three phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical seal
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
1mo
Mbombela / Nelspruit
1
R 12,060
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 1.1kW – single phase
with excellent suction capacity even in the presence of air bubbles.
Important to realize it is suitable for pumping water with low levels of
sandy impurities. Especially used in domestic water supply
installations.
Afterwards it is suitable for small farms and gardening, small scale
industrial services and where self priming is necessary. For the purpose
of complete of ejector and diffuser for high priming capability.
Suitable for sucking from well up to 9 meter, provided in 3 different
material pump body: cast-iron, stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 1.1kW – single phase:
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical sealInlet: 1″Outlet: 1″
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 V
Three phase 230/400 V
1mo
Mbombela / Nelspruit
1
R 4,713
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 0.6kW – three phase
with excellent suction capacity even in the presence of air bubbles.
Suitable for pumping water with low levels of sandy impurities.
Especially used in domestic water supply installations.
Suitable for small farms and gardening, small scale industrial
services and where self priming is necessary. Complete of ejector and
diffuser for high priming capability. Suitable for sucking from well up
to 9 meter, provided in 3 different material pump body: cast-iron,
stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 0.6kW – three phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical seal
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 V
Three phase 230/400 V
1mo
Mbombela / NelspruitSave this search and get notified
when new items are posted!