Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Home & Garden
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Results for Tanks & Water Storage Tanks in Mbombela / Nelspruit in Mbombela / Nelspruit
1
R 1,029.62
SavedSave
Please note that shipping and installation is not included.Motorized Ball Valves 15mm (Ceramic-PVC) 3-wire
Firstly Motorized ball
valves are a vital piece of equipment in numerous applications. This
model opens and closes in 6-8 seconds, and remains in its new position
while expending almost no energy. Moreover the key difference between
motorized ball valves and many solenoid valves. Most solenoid valves are
energized continuously when in a new position, while motorized ball
valves expend energy only when changing from open to close, or vice
versa.
This model is perfect for situations where the valve needs to be
closed in case of power loss. The valve can be energized to open, and
left hooked up, with negligible energy used once fully opened. To close,
simply shutoff power to the valve. This valve is convenient because it
can be operated with a simple on off switch. When on, it will remain
open, when turned off (or power is lost for some other reason) the valve
automatically closes.
Overview Specifications:
Ball Pressure: High PressurePower: Electric, Manual and electric switchMaterial: Stainless SteelTemperature of Media: Medium TemperatureMedia: Water, Water/oil/acid/ gas/steamApplication: cement power plantInput signal: 4-20mAOutput signal: 4-20mABall valve connection type: Wafer/ FlangePressure grade: 1.6 / 2.5 MpaVoltage: 220vProtection class: IP65Dynamo working system:50%
What Is A Motorized Ball Valve?
Finally the Motorized Ball valve is an automated ball valve that uses
a motor to control its mechanism. It is an integrated valve consisting
of a ball valve and a motor that automatically opens and closes by
energizing the motor after receiving an electric signal. Thus, it is
also known as an Actuated ball valve.
Motorized Ball Valves Uses Finally for applications requiring continuous automatic flow control
motorized ball valves are the best option. You can use them anywhere in
your home where you need automatic water control—for example, home water
systems, HVAC, water filters, and other automation projects.
19d
Mbombela / Nelspruit
1
R 13,257.20
SavedSave
Please note that shipping and installation is not included.The Aquasystem Horizontal
Pressure Tanks 200l Horizontal. Is an element used in hydraulic
applications for sanitary water circuits, such as pressure groups in
combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to pre-charge air pressure stored between the membrane and the internal metal
surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue Epoxy Coated
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre-charge pressure – 2 bar
Connection – 1 1/4″
Aquasystem Horizontal Pressure Tanks 200l Horizontal
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
19d
Mbombela / Nelspruit
1
R 4,135.34
SavedSave
Please note that shipping and installation is not included.
Stainless Steel Solenoid Valve 2″ and electromagnets technically are
not the same thing, but people talk as if they are. A solenoid is just a
coil of wire, but when you run a current through it, you create an
electromagnet. Since this is by far the most useful application of a
coil of wire, it’s not surprising that when you say the word ‘solenoid,’
people tend to assume you mean electromagnet.Electromagnets are
particularly useful because, unlike regular magnets, they can be
switched on and off, and strengthened by increasing the current flowing
through them. It also refers to any device that converts electrical
energy to mechanical energy using a solenoid. The device creates a
magnetic field from an electric current and uses the magnetic field to
create linear motion.
In other words:
When a lazy charge sits on its couch, doing nothing, it is
surrounded by an electric field. This makes sense, because it’s an
electric charge, after all. But once that charge gets some motivation
and goes for a run around the block, suddenly it produces a magnetic
field. This might strike you as odd, and you wouldn’t be alone! As
physicists figured out later, both fields are part of the same force of
nature: electromagnetism. Because of this, we can create a magnet by
simply running a current through a wire. When we run a current through a
solenoid. However, we get a super-strong magnet because the magnetic
field is concentrated inside the coil. This can be incredibly useful in
our everyday lives.
Stainless Steel Solenoid Valve 2″ is used in demanding application
where the materials need to be anti-corrosive. Most of our valves are
fitted with Viton seals as a standard. Some of the Stainless Steel
Valves, like PLA type, are fitted with Stainless Steel Pistons and
Teflon (PTFE) Seals for High Temperature Applications. PLA22 type has a
Stainless Steel 304 (SS304) body and PDS22SH and PLM22 is Stainless
Steel 316 (SS316).
25d
Mbombela / Nelspruit
1
R 1,204.74
SavedSave
Please note that shipping and installation is not included.
Stainless Steel Solenoid Valve 1/2″ and electromagnets technically
are not the same thing, but people talk as if they are. A solenoid is
just a coil of wire, but when you run a current through it, you create
an electromagnet. Since this is by far the most useful application of a
coil of wire, it’s not surprising that when you say the word ‘solenoid,’
people tend to assume you mean electromagnet. Electromagnets are
particularly useful because, unlike regular magnets, they can be
switched on and off, and strengthened by increasing the current flowing
through them. It also refers to any device that converts electrical
energy to mechanical energy using a solenoid. The device creates a
magnetic field from an electric current and uses the magnetic field to
create linear motion.
In other words:
When a lazy charge sits on its couch, doing nothing, it is
surrounded by an electric field. This makes sense, because it’s an
electric charge, after all. But once that charge gets some motivation
and goes for a run around the block, suddenly it produces a magnetic
field. This might strike you as odd, and you wouldn’t be alone! As
physicists figured out later, both fields are part of the same force of
nature: electromagnetism. Because of this, we can create a magnet by
simply running a current through a wire. When we run a current through a
solenoid, however, we get a super-strong magnet because the magnetic
field is concentrated inside the coil. This can be incredibly useful in
our everyday lives.
STAINLESS STEEL SOLENOID VALVES is used in demanding application
where the materials need to be anti-corrosive. Most of our valves are
fitted with Viton seals as a standard. Some of the Stainless Steel
Valves, like PLA type, are fitted with Stainless Steel Pistons and
Teflon (PTFE) Seals for High Temperature Applications. PLA22 type has
a Stainless Steel 304 (SS304) body and PDS22SH and PLM22 is Stainless
Steel 316 (SS316).
Stainless Steel Solenoid Valve 1/2″ Specs:
Size: 16mm
CV Factor: 12
Operational Pressure differential: AC: 10 / DC: 6
Maximum Fluid Temp: 120
Power Consumption: AC : 220V/DC 24VExternal Dimensions: L – 69 / W – 57 / H – 106
25d
Mbombela / Nelspruit
1
R 1,927.58
SavedSave
Please note that shipping and installation is not included.
Stainless Steel Solenoid Valve 1″ and electromagnets technically are
not the same thing, but people talk as if they are. A solenoid is just a
coil of wire, but when you run a current through it, you create an
electromagnet. Since this is by far the most useful application of a
coil of wire, it’s not surprising that when you say the word ‘solenoid,’
people tend to assume you mean electromagnet. Electromagnets are
particularly useful because, unlike regular magnets, they can be
switched on and off, and strengthened by increasing the current flowing
through them. It also refers to any device that converts electrical
energy to mechanical energy using a solenoid. The device creates a
magnetic field from an electric current and uses the magnetic field to
create linear motion.
In other words:
When a lazy charge sits on its couch, doing nothing, it is
surrounded by an electric field. This makes sense, because it’s an
electric charge, after all. But once that charge gets some motivation
and goes for a run around the block, suddenly it produces a magnetic
field. This might strike you as odd, and you wouldn’t be alone! As
physicists figured out later, both fields are part of the same force of
nature: electromagnetism. Because of this, we can create a magnet by
simply running a current through a wire. When we run a current through a
solenoid, however, we get a super-strong magnet because the magnetic
field is concentrated inside the coil. This can be incredibly useful in
our everyday lives.
Stainless Steel Solenoid Valve 1″ is used in demanding application
where the materials need to be anti-corrosive. Most of our valves are
fitted with Viton seals as a standard. Some of the Stainless Steel
Valves, like PLA type, are fitted with Stainless Steel Pistons and
Teflon (PTFE) Seals for High Temperature Applications. PLA22 type has a
Stainless Steel 304 (SS304) body and PDS22SH and PLM22 is Stainless
Steel 316 (SS316).
Specs:CV Factor: 12
Operational Pressure differential: AC: 10 / DC: 6
Maximum Fluid Temp: 120
Power Consumption: AC : 220V/DC 24V
External Dimensions: L – 99 / W – 77 / H – 121
25d
Mbombela / Nelspruit
1
R 3,598.07
SavedSave
Please note that shipping and installation is not included.
Stainless Steel Solenoid Valve 1.5″ and electromagnets technically
are not the same thing, but people talk as if they are. A solenoid is
just a coil of wire, but when you run a current through it, you create
an electromagnet. Since this is by far the most useful application of a
coil of wire, it’s not surprising that when you say the word ‘solenoid,’
people tend to assume you mean electromagnet. Electromagnets are
particularly useful because, unlike regular magnets, they can be
switched on and off, and strengthened by increasing the current flowing
through them. It also refers to any device that converts electrical
energy to mechanical energy using a solenoid. The device creates a
magnetic field from an electric current and uses the magnetic field to
create linear motion.
In other words:
When a lazy charge sits on its couch, doing nothing, it is
surrounded by an electric field. This makes sense, because it’s an
electric charge, after all. But once that charge gets some motivation
and goes for a run around the block, suddenly it produces a magnetic
field. This might strike you as odd, and you wouldn’t be alone! As
physicists figured out later, both fields are part of the same force of
nature: electromagnetism. Because of this, we can create a magnet by
simply running a current through a wire. When we run a current through a
solenoid. However, we get a super-strong magnet because the magnetic
field is concentrated inside the coil. This can be incredibly useful in
our everyday lives.
Stainless Steel Solenoid Valve 1.5″ is used in demanding
application where the materials need to be anti-corrosive. Most of our
valves are fitted with Viton seals as a standard. Some of the Stainless
Steel Valves, like PLA type, are fitted with Stainless Steel Pistons and
Teflon (PTFE) Seals for High Temperature Applications. PLA22 type has a
Stainless Steel 304 (SS304) body and PDS22SH and PLM22 is Stainless
Steel 316 (SS316).
25d
Mbombela / Nelspruit
1
R 3,222.99
SavedSave
Please note that shipping and installation is not included.Multi-Jet brass water meter with tails & reed switches – 32mm
Characteristics:– Firstly all the Materials in contact with water, consciously selected by the known resistance to corrosion
– Can be used safely in water temperature up to 50℃(T50)
– The indicator register is of 5 Rollers (Dn40/Dn50 with 6 Rollers) and 4 Pointers
– The Impeller is the only moving part in contact with water
– The extra inlet filter at the inlet of the meter body permits cleaning it without breaking the metro logical seal
– They come with Magnetic Protection against the external influences
Finally the Pulse Emitter Device
consists of a plastic housing with Reed Switch, and 1,5 m cable with 2
cores in Red and Black. Option with 2 reed switches and 1,5 m cable with
3 cores in Red, Black
Blue Electric Data: Vmax=24AC/DC; I max=0,01A Capacity of the Pulse Emitter:
Magnet Position Liter/Pulse
x0,001 10
Brass Flow Meter with 1:1 pulse output for use with a Seko APG603 dosing pump or similar
Multi-Jet brass water meter with tails & reed switches – 32mm Installation Requirements:
Straight away must be installed on a horizontal pipeline only.The pipeline must be flushed before installation.The meters should be constantly full of water during operation.
25d
Mbombela / Nelspruit
1
R 1,851.82
SavedSave
Please note that shipping and installation is not included. Multi-Jet brass water meter with tails & reed switches – 32mm
Characteristics:– Firstly all the Materials in contact with water, consciously selected by the known resistance to corrosion
– Can be used safely in water temperature up to 50℃(T50)
– The indicator register is of 5 Rollers (Dn40/Dn50 with 6 Rollers) and 4 Pointers
– The Impeller is the only moving part in contact with water
– The extra inlet filter at the inlet of the meter body permits cleaning it without breaking the metrological seal
– They come with Magnetic Protection against the external influences
Finally the Pulse Emitter Device
consists of a plastic housing with Reed Switch, and 1,5 m cable with 2
cores in Red and Black. Option with 2 reed switches and 1,5 m cable with
3 cores in Red, Black
Blue Electric Data: Vmax=24AC/DC; I max=0,01A Capacity of the Pulse Emitter:
Magnet Position Liter/Pulse
x0,001 10
Brass Flow Meter with 1:1 pulse output for use with a Seko APG603 dosing pump or similar
Multi-Jet brass water meter with tails & reed switches – 32mm Installation Requirements:
Straightaway must be installed on a horizontal pipeline only.The pipeline must be flushed before installation.The meters should be constantly full of water during operation.
25d
Mbombela / Nelspruit
1
R 1,439.48
SavedSave
Please note that shipping and installation is not included.
Multi-Jet brass water meter with tails & reed switches – 25mm
Characteristics:– Firstly all the Materials in contact with water, consciously selected by the known resistance to corrosion
– Can be used safely in water temperature up to 50℃(T50)
– The indicator register is of 5 Rollers (Dn40/Dn50 with 6 Rollers) and 4 Pointers
– The Impeller is the only moving part in contact with water
– The extra inlet filter at the inlet of the meter body permits cleaning it without breaking the metro logical seal
– They come with Magnetic Protection against the external influences
Surprisingly the Pulse Emitter Device consists of a plastic housing
with Reed Switch, and 1,5 m cable with 2 cores in Red and Black. Option
with 2 reed switches and 1,5 m cable with 3 cores in Red, Black
Blue Electric Data: V max=24AC/DC; I max=0,01A Capacity of the Pulse Emitter:
Magnet Position Liter/Pulse
x0,001 10
Multi-Jet brass water meter with tails & reed switches – 25mm Installation Requirements:
Straightaway must be installed on a horizontal pipeline only.The pipeline must be flushed before installation.The meters should be constantly full of water during operation.
25d
Mbombela / Nelspruit
1
R 989.87
SavedSave
Please note that shipping and installation is not included.Multi-Jet brass water meter with tails & reed switches – 20mm
Characteristics:
– Firstly all the Materials in contact with water, consciously selected by the known resistance to corrosion
– Can be used safely in water temperature up to 50℃(T50)
– The indicator register is of 5 Rollers (Dn40/Dn50 with 6 Rollers) and 4 Pointers
– The Impeller is the only moving part in contact with water
– The extra inlet filter at the inlet of the meter body permits cleaning it without breaking the metrological seal
– They come with Magnetic Protection against the external influences
Finally the Pulse Emitter Device consists of a plastic housing with
Reed Switch, and 1,5 m cable with 2 cores in Red and Black. Option with 2
reed switches and 1,5 m cable with 3 cores in Red, Black
Blue Electric Data: Vmax=24AC/DC; I max=0,01A Capacity of the Pulse Emitter:
Magnet Position Litre/Pulse
x0,001 10
Multi-Jet brass water meter with tails & reed switches – 20mm Installation Requirements:
Straightaway must be installed on a horizontal pipeline only.The pipeline must be flushed before installation.The meters should be constantly full of water during operation.
25d
Mbombela / Nelspruit
1
R 10,308.60
SavedSave
Please note that shipping and installation is not included.
Firstly the Multi-Jet brass hot water meter – 50mm. Measurement of
volume of cold or hot potable water consumption. Suitable for both
domestic and small business applications.
FEATURES
Approved to SANS1529 -1: 2019 Class B specifications. (SA 1566).For Horizontal installation.Clear, easily read, dry dial counter. Reads to 0.0002m3.Cold water meter working temperature ≤ 50°C.Hot water meter working temperature ≤ 90°C.The strainer is removable for maintenance in the eld.Working pressure 1600 kPa.Suitable for measuring potable water.Inlet and Outlet threads are compatible with ISO metric sizes.Dezincication Resistant Brass body (DZR).Less susceptible to damage caused by suspended solids.Pulse prepared – different settings available. (To be specified).Recalibrated possible in a SANAS-accredited verification laboratory.
Installation Instructions
Thank you for choosing The Water Company’s Multi-Jet brass hot water meter – 50mm.
This device has undergone thorough testing and verification at
Precision Meters’ SANAS Accredited Verification Laboratory, conducted by
a certified Verification Officer, to ensure it meets SANS 1529-1:2019
Class B specifications. It is supplied in full working order.
As a precision instrument, the water meter features exacting
tolerances between its moving parts and is designed exclusively for
measuring potable water. Exposure to grit, sand, or other suspended
solids can cause permanent damage to the meter. Such damage incurred
during installation is not covered by The Water Company warranty.To ensure proper installation, it is imperative that the installer
maintains cleanliness throughout the process. Thoroughly flush the
pipeline before installing the meter.
1mo
Mbombela / Nelspruit
1
R 5,666.63
SavedSave
Please note that shipping and installation is not included.
Firstly the Multi-Jet brass hot water meter – 40mm. Measurement of
volume of cold or hot potable water consumption. Suitable for both
domestic and small business applications.
FEATURES
Approved to SANS1529 -1: 2019 Class B specifications. (SA 1566).For Horizontal installation.Clear, easily read, dry dial counter. Reads to 0.0002m3.Cold water meter working temperature ≤ 50°C.Hot water meter working temperature ≤ 90°C.The strainer is removable for maintenance in the eld.Working pressure 1600 kPa.Suitable for measuring potable water.Inlet and Outlet threads are compatible with ISO metric sizes.Dezincication Resistant Brass body (DZR).Less susceptible to damage caused by suspended solids.Pulse prepared – different settings available. (To be specified).Recalibrated possible in a SANAS-accredited verification laboratory.
Installation Instructions
Thank you for choosing The Water Company’s Multi-Jet brass hot water meter – 40mm.
This device has undergone thorough testing and verification at
Precision Meters’ SANAS Accredited Verification Laboratory, conducted by
a certified Verification Officer, to ensure it meets SANS 1529-1:2019
Class B specifications. It is supplied in full working order.
As a precision instrument, the water meter features exacting
tolerances between its moving parts and is designed exclusively for
measuring potable water. Exposure to grit, sand, or other suspended
solids can cause permanent damage to the meter. Such damage incurred
during installation is not covered by The Water Company warranty.To ensure proper installation, it is imperative that the installer
maintains cleanliness throughout the process. Thoroughly flush the
pipeline before installing the meter.
1mo
Mbombela / Nelspruit
1
R 2,848.84
SavedSave
Please note that shipping and installation is not included.
Firstly the Multi-Jet brass hot water meter – 25mm. Measurement of
volume of cold or hot potable water consumption. Suitable for both
domestic and small business applications.
FEATURES
Approved to SANS1529 -1: 2019 Class B specifications. (SA 1566).For Horizontal installation.Clear, easily read, dry dial counter. Reads to 0.0002m3.Cold water meter working temperature ≤ 50°C.Hot water meter working temperature ≤ 90°C.The strainer is removable for maintenance in the eld.Working pressure 1600 kPa.Suitable for measuring potable water.Inlet and Outlet threads are compatible with ISO metric sizes.Dezincication Resistant Brass body (DZR).Less susceptible to damage caused by suspended solids.Pulse prepared – different settings available. (To be specified).Recalibrated possible in a SANAS-accredited verification laboratory.
Installation Instructions
Thank you for choosing The Water Company’s Multi-Jet brass hot water meter – 25mm.
This device has undergone thorough testing and verification at
Precision Meters’ SANAS Accredited Verification Laboratory, conducted by
a certified Verification Officer, to ensure it meets SANS 1529-1:2019
Class B specifications. It is supplied in full working order.
As a precision instrument, the water meter features exacting
tolerances between its moving parts and is designed exclusively for
measuring potable water. Exposure to grit, sand, or other suspended
solids can cause permanent damage to the meter. Such damage incurred
during installation is not covered by The Water Company warranty.To ensure proper installation, it is imperative that the installer
maintains cleanliness throughout the process. Thoroughly flush the
pipeline before installing the meter.
1mo
Mbombela / Nelspruit
1
R 1,738.80
SavedSave
Please note that shipping and installation is not included.
Firstly the
Multi-Jet brass hot water meter – 20mm. Measurement of volume of cold or
hot potable water consumption. Suitable for both domestic and small
business applications.
FEATURES
Approved to SANS1529 -1: 2019 Class B specifications. (SA 1566).For Horizontal installation.Clear, easily read, dry dial counter. Reads to 0.0002m3.Cold water meter working temperature ≤ 50°C.Hot water meter working temperature ≤ 90°C.The strainer is removable for maintenance in the eld.Working pressure 1600 kPa.Suitable for measuring potable water.Inlet and Outlet threads are compatible with ISO metric sizes.Dezincication Resistant Brass body (DZR).Less susceptible to damage caused by suspended solids.Pulse prepared – different settings available. (To be specified).Recalibrated possible in a SANAS-accredited verification laboratory.
Installation Instructions
Thank you for choosing The Water Company’s Multi-Jet brass hot water meter – 20mm.
This device has undergone thorough testing and verification at
Precision Meters’ SANAS Accredited Verification Laboratory, conducted by
a certified Verification Officer, to ensure it meets SANS 1529-1:2019
Class B specifications. It is supplied in full working order.
As a precision instrument, the water meter features exacting
tolerances between its moving parts and is designed exclusively for
measuring potable water. Exposure to grit, sand, or other suspended
solids can cause permanent damage to the meter. Such damage incurred
during installation is not covered by The Water Company warranty.To ensure proper installation, it is imperative that the installer
maintains cleanliness throughout the process. Thoroughly flush the
pipeline before installing the meter.
1mo
Mbombela / Nelspruit
1
R 1,498.16
SavedSave
Please note that shipping and installation is not included.Firstly the ground level box – 20mm plastic meter – strainer – SABS
20mm valve . Suitable for both domestic and small business applications.
Pre-plumbed meter installation in a surface/ground level meter box.
Meter Box Features:
Base Plate.UV stabilised lockable lid.2 Way SABS approved plastic ball valve.20mm Polymer male inlet/outlet fittings.Additional servicable fine mesh strainer.
Meter Specifications:
20mm Polymer volumetric piston meter.165mm long with sealed wet dial, non-return valve and pulse output.Meter approved by NRCS to Class C specifications.(SANS 1529-1:2019)
It is essential that the Ground level box – 20mm plastic meter –
strainer – SABS 20mm valve installer works cleanly during the
installation process. The pipeline must be flushed thoroughly prior to
the installation of this water meter. The meter assembly fitted inside
this meter box has been fully pressure tested at the factory. Prior to
dispatch and it is leak free at time of supply.
The water meter fitted in this meter box has been fully Tested and
Verified in Precision Meters SANAS Accredited Verification Laboratory by
a registered Verification Officer prior to it being supplied. This
water meter is verified to SANS 1529-1: 2019 Class C specifications and
it is supplied in a fully functional condition.
As noticed water meter is a precision measuring device which has fine
tolerances between its moving parts. It is designed for the measurement
of potable water only. Grit, sand, or other suspended solids passing
through this water meter will cause the piston to jam and cause
irreparable scouring damage to both piston and chamber. Damage of this
type caused during the installation process is not covered under the
Precision Meters warranty.The meter assembly fitted inside this meter box has been fully
pressure tested at the factory prior to dispatch and it is leak free at
time of supply. The soil directly under the meter box must be well
compacted before the installation of the meter box and the meter box
must be placed on a foundation of two bricks or a small concrete slab to
ensure stability.
1mo
Mbombela / Nelspruit
1
R 1,009.13
SavedSave
Please note that shipping and installation is not included.Firstly the ground level box – 20mm plastic meter – SABS 20mm valve
male in/out. Suitable for both domestic and small business applications.
Pre-plumbed meter installation in a surface/ground level meter box.
Meter Box Features:
Base Plate.UV stabilised polymer lockable lid.2 Way SABS approved plastic ball valve.20mm Polymer male inlet/outlet fittings.Tamper resistant locking mechanism operated with special key.
Meter Specifications:
20mm Polymer volumetric piston meter.165mm long with sealed wet dial, non-return valve and pulse output.Meter approved by NRCS to Class C specifications.(SANS 1529-1:2019)Working pressure 1600 kPa.
It is essential that the Ground level box – 15mm plastic meter – SABS
20mm valve installer works cleanly during the installation process.
The pipeline must be flushed thoroughly prior to the installation of
this water meter. The meter assembly fitted inside this meter box has
been fully pressure tested at the factory prior to dispatch and it is
leak free at time of supply.
The water meter fitted in this meter box has been fully Tested and
Verified in Precision Meters SANAS Accredited Verification Laboratory by
a registered Verification Officer prior to it being supplied. This
water meter is verified to SANS 1529-1: 2019 Class C specifications and
it is supplied in a fully functional condition.
As noticed water meter is a precision measuring device which has fine
tolerances between its moving parts. It is designed for the measurement
of potable water only. Grit, sand, or other suspended solids passing
through this water meter will cause the piston to jam and cause
irreparable scouring damage to both piston and chamber. Damage of this
type caused during the installation process is not covered under the
Precision Meters warranty.The meter assembly fitted inside this meter box has been fully
pressure tested at the factory prior to dispatch and it is leak free at
time of supply.
1mo
Mbombela / Nelspruit
1
R 1,614.60
SavedSave
Please note that shipping and installation is not included.Firstly the ground level box – 20mm brass meter – SABS 20mm valve
male in/out. Suitable for both domestic and small business applications.
Pre-plumbed meter installation in a surface/ground level meter box.
Meter Box Features:
Base Plate.UV stabilised polymer lockable lid.2 Way SABS approved plastic ball valve.20mm Polymer male inlet/outlet fittings.Tamper resistant locking mechanism operated with special key.
Meter Specifications:
20mm brass volumetric piston meter.165mm long with sealed wet dial, non-return valve and pulse output.Meter approved by NRCS to Class C specifications.(SANS 1529-1:2019)Working pressure 1600 kPa.
It is essential that the Ground level box – 15mm brass meter – SABS
20mm valve installer works cleanly during the installation process. The
pipeline must be flushed thoroughly prior to the installation of this
water meter. The meter assembly fitted inside this meter box has been
fully pressure tested at the factory prior to dispatch and it is leak
free at time of supply.
The water meter fitted in this meter box has been fully Tested and
Verified in Precision Meters SANAS Accredited Verification Laboratory by
a registered Verification Officer prior to it being supplied. This
water meter is verified to SANS 1529-1: 2019 Class C specifications and
it is supplied in a fully functional condition.
As noticed water meter is a precision measuring device which has fine
tolerances between its moving parts. It is designed for the measurement
of potable water only. Grit, sand, or other suspended solids passing
through this water meter will cause the piston to jam and cause
irreparable scouring damage to both piston and chamber. Damage of this
type caused during the installation process is not covered under the
Precision Meters warranty.The meter assembly fitted inside this meter box has been fully
pressure tested at the factory prior to dispatch and it is leak free at
time of supply.
1mo
Mbombela / Nelspruit
1
R 1,258.44
SavedSave
Please note that shipping and installation is not included.Firstly the ground level box – 15mm plastic meter – strainer – SABS
20mm valve . Suitable for both domestic and small business applications.
Pre-plumbed meter installation in a surface/ground level meter box.
Meter Box Features:
Base Plate.UV stabilised lockable lid.2 Way SABS approved plastic ball valve.20mm Polymer male inlet/outlet fittings.Additional servicable fine mesh strainer.
Meter Specifications:
15mm Polymer volumetric piston meter.114mm long with sealed wet dial, non-return valve and pulse output.Meter approved by NRCS to Class C specifications.(SANS 1529-1:2019)
It is essential that the Ground level box – 15mm plastic meter –
strainer – SABS 20mm valve installer works cleanly during the
installation process. The pipeline must be flushed thoroughly prior to
the installation of this water meter. The meter assembly fitted inside
this meter box has been fully pressure tested at the factory. Prior to
dispatch and it is leak free at time of supply.
The water meter fitted in this meter box has been fully Tested and
Verified in Precision Meters SANAS Accredited Verification Laboratory by
a registered Verification Officer prior to it being supplied. This
water meter is verified to SANS 1529-1: 2019 Class C specifications and
it is supplied in a fully functional condition.
As noticed water meter is a precision measuring device which has fine
tolerances between its moving parts. It is designed for the measurement
of potable water only. Grit, sand, or other suspended solids passing
through this water meter will cause the piston to jam and cause
irreparable scouring damage to both piston and chamber. Damage of this
type caused during the installation process is not covered under the
Precision Meters warranty.The meter assembly fitted inside this meter box has been fully
pressure tested at the factory prior to dispatch and it is leak free at
time of supply. The soil directly under the meter box must be well
compacted before the installation of the meter box and the meter box
must be placed on a foundation of two bricks or a small concrete slab to
ensure stability.
1mo
Mbombela / Nelspruit
1
R 900.45
SavedSave
Please note that shipping and installation is not included.Firstly
the ground level box – 15mm plastic meter – SABS 20mm valve male
in/out. Suitable for both domestic and small business applications.
Pre-plumbed meter installation in a surface/ground level meter box.
Meter Box Features:
Base Plate.UV stabilised polymer lockable lid.Way SABS approved plastic ball valve.20mm Polymer male inlet/outlet fittings.Tamper resistant locking mechanism operated with special key.
Meter Specifications:
15mm Polymer volumetric piston meter.114mm long with sealed wet dial, non-return.Valve and pulse output.Meter approved by NRCS to Class C specifications.SANS 1529-1:2019Working pressure 1600 kPa.
It is essential that the Ground level box – 15mm plastic meter – SABS
20mm valve installer works cleanly during the installation process.
The pipeline must be flushed thoroughly prior to the installation of
this water meter. The meter assembly fitted inside this meter box has
been fully pressure tested at the factory prior to dispatch and it is
leak free at time of supply.
The water meter fitted in this meter box has been fully Tested and
Verified in Precision Meters SANAS Accredited Verification Laboratory by
a registered Verification Officer prior to it being supplied. This
water meter is verified to SANS 1529-1: 2019 Class C specifications and
it is supplied in a fully functional condition.
As noticed water meter is a precision measuring device which has fine
tolerances between its moving parts. It is designed for the measurement
of potable water only. Grit, sand, or other suspended solids passing
through this water meter will cause the piston to jam and cause
irreparable scouring damage to both piston and chamber. Damage of this
type caused during the installation process is not covered under the
Precision Meters warranty.
The meter assembly fitted inside this meter box has been fully
pressure tested at the factory prior to dispatch and it is leak free at
time of supply
1mo
Mbombela / Nelspruit
1
R 1,405.01
SavedSave
Please note that shipping and installation is not included.Firstly the ground level box – 15mm brass meter – SABS 20mm valve
male in/out. Suitable for both domestic and small business applications.
Pre-plumbed meter installation in a surface/ground level meter box.
Meter Box Features:
Base Plate.UV stabilised polymer lockable lid.2 Way SABS approved plastic ball valve.20mm Polymer male inlet/outlet fittings.Tamper resistant locking mechanism operated with special key.
Meter Specifications:
15mm brass volumetric piston meter.165mm long with sealed wet dial, non-return valve and pulse output.Meter approved by NRCS to Class C specifications.(SANS 1529-1:2019)Working pressure 1600 kPa.
It is essential that the Ground level box – 15mm brass meter – SABS
20mm valve installer works cleanly during the installation process. The
pipeline must be flushed thoroughly prior to the installation of this
water meter. The meter assembly fitted inside this meter box has been
fully pressure tested at the factory prior to dispatch and it is leak
free at time of supply.
The water meter fitted in this meter box has been fully Tested and
Verified in Precision Meters SANAS Accredited Verification Laboratory by
a registered Verification Officer prior to it being supplied. This
water meter is verified to SANS 1529-1: 2019 Class C specifications and
it is supplied in a fully functional condition.
As noticed water meter is a precision measuring device which has fine
tolerances between its moving parts. It is designed for the measurement
of potable water only. Grit, sand, or other suspended solids passing
through this water meter will cause the piston to jam and cause
irreparable scouring damage to both piston and chamber. Damage of this
type caused during the installation process is not covered under the
Precision Meters warranty.The meter assembly fitted inside this meter box has been fully
pressure tested at the factory prior to dispatch and it is leak free at
time of supply.
1mo
Mbombela / NelspruitSave this search and get notified
when new items are posted!