Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Home & Garden
Pay OnlineSECURELYEASY DELIVERY OR COLLECTION
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Available for meet-up collection
Pay securely, collect from seller
Pay for this item securely on Gumtree. We have multiple easy ways to pay and hold your money safely with us until you've collected your item from seller.
Learn more
Filter & refine
Clear All
Results for Water Purifiers & Geysers in South Africa in South Africa
1
R 4,713.39
SavedSave
Please note that shipping and installation is not included.Technical SpecificationsPower: 80WInjection Range: 30-70m3Ozone Concentration: 15-25g/m3Unit Dimensions: 23cm x 18cm x 46.5cmPackage Dimensions: 32cm x 26cm x 51cmNet Weight: 5.1kgGross Weight: 5.9kgCooling Way: Air CoolingVoltage: 220V/50HzGas Feeding: Air SourceAir Pump Model: Air Pump 16LOuter Flow: 16LChassis Material: Carbon Steel Spray PaintedCooling Fans: 20W/12cm x 12cm x 3.8cm
Functions
Efficiently destroy a variety of bacteria and viruses, but without secondary pollution.Effectively remove residual pesticides from vegetables and fruits.Eliminate mold, smoke, and remove bad odor.Improve the oxygen level for air and water.Purifies the air and expedite human metabolism. Removes skin pore dirt, bacteria, and prevent freckles, acne, and pigmentation
Operating Environment
Ambient Temperature: -10˚C ~37˚CAmbient Humidity: ≤55%There should be no flammable or explosive gas and conductive power dust in the room. It is not permittable to install the unit in a place where alkaline air is easy to leak or with a risk of an explosion that could occur.The ground for equipment installation must be horizontal, and the equipment should be placed on the ground or steady supportsThere must be a draft fan or air conditioner to keep the air dry and the operating environment in good ventilation.
Safety Notes
This series of products use 220V/50Hz AC power source. If the voltage and frequency fluctuation range is heavy, this may cause damage and equipment failure.The power cord plugs should keep in contact with the socket firmly. If not, this may cause abnormal electricity usage, and even cause electrocution.Users should regularly check the power cord, and avoid standing or putting heavy objects on the power cord.Please don’t use the unit in an environment that contains explosive products.In operation, the machine uses high voltage. Don’t open the back door or touch the inside of the unit when its plugged in.Avoid inside contact with water as this will damage the unit.
14d
Mbombela / Nelspruit1
R 1,029.62
SavedSave
Please note that shipping and installation is not included.Motorized Ball Valves 15mm (Ceramic-PVC) 3-wireFirstly Motorized ball valves are a vital piece of equipment in numerous applications. This model opens and closes in 6-8 seconds, and remains in its new position while expending almost no energy. Moreover the key difference between motorized ball valves and many solenoid valves. Most solenoid valves are energized continuously when in a new position, while motorized ball valves expend energy only when changing from open to close, or vice versa.This model is perfect for situations where the valve needs to be closed in case of power loss. The valve can be energized to open, and left hooked up, with negligible energy used once fully opened. To close, simply shutoff power to the valve. This valve is convenient because it can be operated with a simple on off switch. When on, it will remain open, when turned off (or power is lost for some other reason) the valve automatically closes.Overview Specifications:
Ball Pressure: High PressurePower: Electric, Manual and electric switchMaterial: Stainless SteelTemperature of Media: Medium TemperatureMedia: Water, Water/oil/acid/ gas/steamApplication: cement power plantInput signal: 4-20mAOutput signal: 4-20mABall valve connection type: Wafer/ FlangePressure grade: 1.6 / 2.5 MpaVoltage: 220vProtection class: IP65Dynamo working system:50%
What Is A Motorized Ball Valve?Finally the Motorized Ball valve is an automated ball valve that uses a motor to control its mechanism. It is an integrated valve consisting of a ball valve and a motor that automatically opens and closes by energizing the motor after receiving an electric signal. Thus, it is also known as an Actuated ball valve.Motorized Ball Valves Uses. Finally for applications requiring continuous automatic flow control motorized ball valves are the best option. You can use them anywhere in your home where you need automatic water control—for example, home water systems, HVAC, water filters, and other automation projects.
14d
Mbombela / Nelspruit1
R 1,044.52
SavedSave
Please note that shipping and installation is not included.Motorized Ball Valves 20mm (Ceramic-PVC) 3-wireFirstly Motorized ball valves are a vital piece of equipment in numerous applications. This model opens and closes in 6-8 seconds, and remains in its new position while expending almost no energy. Moreover the key difference between motorized ball valves and many solenoid valves. Most solenoid valves are energized continuously when in a new position, while motorized ball valves expend energy only when changing from open to close, or vice versa.This model is perfect for situations where the valve needs to be closed in case of power loss. The valve can be energized to open, and left hooked up, with negligible energy used once fully opened. To close, simply shutoff power to the valve. This valve is convenient because it can be operated with a simple on off switch. When on, it will remain open, when turned off (or power is lost for some other reason) the valve automatically closes.Overview Specifications:
Ball Pressure: High PressurePower: Electric, Manual and electric switchMaterial: Stainless SteelTemperature of Media: Medium TemperatureMedia: Water, Water/oil/acid/ gas/steamApplication: cement power plantInput signal: 4-20mAOutput signal: 4-20mABall valve connection type: Wafer/ FlangePressure grade: 1.6 / 2.5 MpaVoltage: 220vProtection class: IP65 Dynamo working system: 50%What Is A Motorized Ball Valve? Finally the Motorized Ball valve is an automated ball valve that uses a motor to control its mechanism. It is an integrated valve consisting of a ball valve and a motor that automatically opens and closes by energizing the motor after receiving an electric signal. Thus, it is also known as an actuated ball valve.Motorized Ball Valves Uses. Finally for applications requiring continuous automatic flow control motorized ball valves are the best option. You can use them anywhere in your home where you need automatic water control—for example, home water systems, HVAC, water filters, and other automation projects.
14d
Mbombela / Nelspruit1
R 1,391.04
SavedSave
Please note that shipping and installation is not included.Motorized Ball Valves 25mm (Ceramic-PVC) 3-wireFirstly Motorized ball valves are a vital piece of equipment in numerous applications. This model opens and closes in 6-8 seconds, and remains in its new position while expending almost no energy. Moreover the key difference between motorized ball valves and many solenoid valves. Most solenoid valves are energized continuously when in a new position, while motorized ball valves expend energy only when changing from open to close, or vice versa.This model is perfect for situations where the valve needs to be closed in case of power loss. The valve can be energized to open, and left hooked up, with negligible energy used once fully opened. To close, simply shutoff power to the valve. This valve is convenient because it can be operated with a simple on off switch. When on, it will remain open, when turned off (or power is lost for some other reason) the valve automatically closes.Overview Specifications:Ball Pressure: High PressurePower: Electric, Manual and electric switchMaterial: Stainless SteelTemperature of Media: Medium TemperatureMedia: Water, Water/oil/acid/ gas/steamApplication: cement power plantInput signal: 4-20mAOutput signal: 4-20mABall valve connection type: Wafer/ FlangePressure grade: 1.6 / 2.5 MpaVoltage: 220vProtection class: IP65 Dynamo working system: 50%
What Is A Motorized Ball Valve?Finally the Motorized Ball valve is an automated ball valve that uses a motor to control its mechanism. It is an integrated valve consisting of a ball valve and a motor that automatically opens and closes by energizing the motor after receiving an electric signal. Thus, it is also known as an Actuated ball valve.Motorized Ball Valves Uses. Finally for applications requiring continuous automatic flow control motorized ball valves are the best option. You can use them anywhere in your home where you need automatic water control—for example, home water systems, HVAC, water filters, and other automation projects.
14d
Mbombela / Nelspruit1
R 3,163.37
SavedSave
Please note that shipping and installation is not included.Motorized Ball Valves 40mm (Ceramic-PVC) 3-wireFirstly Motorized ball valves are a vital piece of equipment in numerous applications. This model opens and closes in 6-8 seconds, and remains in its new position while expending almost no energy. Moreover the key difference between motorized ball valves and many solenoid valves. Most solenoid valves are energized continuously when in a new position, while motorized ball valves expend energy only when changing from open to close, or vice versa.This model is perfect for situations where the valve needs to be closed in case of power loss. The valve can be energized to open, and left hooked up, with negligible energy used once fully opened. To close, simply shutoff power to the valve. This valve is convenient because it can be operated with a simple on off switch. When on, it will remain open, when turned off (or power is lost for some other reason) the valve automatically closes.Overview Specifications:
Ball Pressure: High PressurePower: Electric, Manual and electric switchMaterial: Stainless SteelTemperature of Media: Medium TemperatureMedia: Water, Water/oil/acid/ gas/steamApplication: cement power plantInput signal: 4-20mAOutput signal: 4-20mABall valve connection type: Wafer/ FlangePressure grade: 1.6 / 2.5 MpaVoltage: 220vProtection class: IP65 Dynamo working system: 50%What Is A Motorized Ball Valve?Finally the Motorized Ball valve is an automated ball valve that uses a motor to control its mechanism. It is an integrated valve consisting of a ball valve and a motor that automatically opens and closes by energizing the motor after receiving an electric signal. Thus, it is also known as an Actuated ball valve.Motorized Ball Valves Uses. Finally for applications requiring continuous automatic flow control motorized ball valves are the best option. You can use them anywhere in your home where you need automatic water control—for example, home water systems, HVAC, water filters, and other automation projects.
14d
Mbombela / Nelspruit1
R 4,930.74
SavedSave
Please note that shipping and installation is not included.Motorized Ball Valves 50mm (Ceramic-PVC) 3-wire
Firstly Motorized ball valves are a vital piece of equipment in numerous applications. This model opens and closes in 6-8 seconds, and remains in its new position while expending almost no energy. Moreover the key difference between motorized ball valves and many solenoid valves. Most solenoid valves are energized continuously when in a new position, while motorized ball valves expend energy only when changing from open to close, or vice versa.This model is perfect for situations where the valve needs to be closed in case of power loss. The valve can be energized to open, and left hooked up, with negligible energy used once fully opened. To close, simply shutoff power to the valve. This valve is convenient because it can be operated with a simple on off switch. When on, it will remain open, when turned off (or power is lost for some other reason) the valve automatically closes.Overview Specifications:
Ball Pressure: High PressurePower: Electric, Manual and electric switchMaterial: Stainless SteelTemperature of Media: Medium TemperatureMedia: Water, Water/oil/acid/ gas/steamApplication: cement power plantInput signal: 4-20mAOutput signal: 4-20mABall valve connection type: Wafer/ FlangePressure grade: 1.6 / 2.5 MpaVoltage: 220vProtection class: IP65 Dynamo working system: 50%What Is A Motorized Ball Valve?Finally the Motorized Ball valve is an automated ball valve that uses a motor to control its mechanism. It is an integrated valve consisting of a ball valve and a motor that automatically opens and closes by energizing the motor after receiving an electric signal. Thus, it is also known as an Actuated ball valve.Motorized Ball Valves UsesFinally for applications requiring continuous automatic flow control motorized ball valves are the best option. You can use them anywhere in your home where you need automatic water control—for example, home water systems, HVAC, water filters, and other automation projects.
14d
Mbombela / Nelspruit1
R 2,164.81
SavedSave
Please note that shipping and installation is not included.Motorized ball valve 1/2″ stainless steel with manual override
Firstly Motorized ball valves are a vital piece of equipment in numerous applications. This model opens and closes in 6-8 seconds, and remains in its new position while expending almost no energy. This is a key difference between motorized ball valves and many solenoid valves. Most solenoid valves are energized continuously when in a new position, while motorized ball valves expend energy only when changing from open to close, or vice
versa.This model is perfect for situations where the valve needs to be closed in case of power loss. The valve can be energized to open, and left hooked up, with negligible energy used once fully opened. To close, simply shutoff power to the valve. This valve is convenient because it can be operated with a simple on off switch. When on, it will remain open, when turned off (or power is lost for some other reason) the valve automatically closes.
Overview Specifications:
Ball Pressure: High PressurePower: Electric, Manual and electric switchMaterial: Stainless SteelTemperature of Media: Medium TemperatureMedia: Water, Water/oil/acid/ gas/steamApplication: cement power plantInput signal: 4-20mAOutput signal: 4-20mABall valve connection type: Wafer/ FlangePressure grade: 1.6 / 2.5 MpaVoltage: 220vProtection class: IP65Dynamo working system:50%
What Is A Motorized Ball Valve?Finally the Motorized Ball valve is an automated ball valve that uses a motor to control its mechanism. As a matter of fact it is an integrated valve consisting of a ball valve and a motor that automatically opens and closes by energizing the motor after receiving an electric signal. Thus, it is also known as an actuated ball valve.
15d
Mbombela / Nelspruit1
R 2,207.03
SavedSave
Please note that shipping and installation is not included.Motorized ball valve 3/4″ stainless steel with manual overrideFirstly Motorized ball valves are a vital piece of equipment in numerous applications. This model opens and closes in 6-8 seconds, and remains in its new position while expending almost no energy. This is a key difference between motorized ball valves and many solenoid valves. Most solenoid valves are energized continuously when in a new position, while motorized ball valves expend energy only when changing from open to close, or vice versa.This model is perfect for situations where the valve needs to be closed in case of power loss. The valve can be energized to open, and left hooked up, with negligible energy used once fully opened. To close, simply shutoff power to the valve. This valve is convenient because it can be operated with a simple on off switch. When on, it will remain open, when turned off (or power is lost for some other reason) the valve automatically closes.Overview Specifications:
Ball Pressure: High PressurePower: Electric, Manual and electric switchMaterial: Stainless SteelTemperature of Media: Medium TemperatureMedia: Water, Water/oil/acid/ gas/steamApplication: cement power plantInput signal: 4-20mAOutput signal: 4-20mABall valve connection type: Wafer/ FlangePressure grade: 1.6 / 2.5 MpaVoltage: 220vProtection class: IP65 Dynamo working system:50%
What Is A Motorized Ball Valve?Finally the Motorized Ball valve is an automated ball valve that uses a motor to control its mechanism. As a matter of fact it is an integrated valve consisting of a ball valve and a motor that automatically opens and closes by energizing the motor after receiving an electric signal. Thus, it is also known as an Actuated ball valve.
15d
Mbombela / Nelspruit1
R 158.70
SavedSave
Please note that shipping and installation is not included.
Type
1812 Reverse Osmosis Membrane Housing
Cap Color
White
Housing Color
White
Inlet and Outlet
1/4″
Threaded
NPT
Operating pressure
Max. 125 PSI
Operating temperature
4 ~ 38℃(40 ~ 100℉)
1812 100 GPD Super flow – The Reverse Osmosis Membrane element is designed for the treatment of low-salinity water resources such as tap water, well water, etc. Working under extra-low pressure, it is applicable to water purifying devices for residence, hospitals, and laboratories.Notes: Permeate of a single element may vary within [-20%] ~ [+20%]Dimensions: 1.0 inch = 25.4 mm
TESTING CONDITIONS:
Testing Pressure ………………………………… 60 psi (0.41MPa)(0.41MPa)The temperature of Testing Solution ……………….. 25℃The concentration of Testing Solution (NaCl) ……… 250 ppmthe pH of Testing Solution ………………………….. 6.5~8.5Recovery of Single Element……………………. 15%
Reverse osmosis (RO) membrane elements for home drinking water are the industry’s most reliable. Advanced membrane technology and automated fabrication allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers, and residential customers can rely on. Membrane elements are shipped dry for convenient handling and long shelf-life. These elements are NSF/ANSI Standard 58 listed.Equipment suppliers can take advantage of the membrane’s Standard 58 listing and participation in the NSF Data Transfer Protocol to reduce costs for reduction claims for their systems. Reverse Osmosis home drinking water elements are rated a 50 psi and will purify about 20% more water than competitive elements rated at 60 psi (please see reference charts on page two for more information).
Operating Limits
Membrane Type Polyamide: Thin-Film CompositeMaximum Operating Temperature: 113°F (45°C)Maximum Operating Pressure: 300 PSIG (21 bar)Maximum Feed Flow Rate: 2.0 GPM (7.6 lpm)pH Range, Continuous Operation: 2 – 11pH Range, Short-Term Cleaning: (30 min.)b 1 – 13Maximum Feed Silt Density Index (SDI): 5Free Chlorine Tolerance: < 0.1 ppm
The maximum temperature for continuous operation above pH 10 is 95°F (35°C).Refer to Cleaning Guidelines in specification sheet 609-23010.Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure.Since oxidation damage is not covered under warranty, Film Tech recommends removing residual free chlorine by pretreatment prior to membrane exposure. Please refer to technical bulletin 609-22010 for more information.
15d
Mbombela / Nelspruit1
R 303.60
SavedSave
Please note that shipping and installation is not included.Membrane Housing 3012
Type
3012 Reverse Osmosis Membrane Housing
Cap Color
White
Housing Color:
White
Operating pressure
Max. 125 PSI
Operating temperature
4 ~ 38℃(40 ~ 100℉)
Membrane Housing 3013
Model Number:
3013 model
Color:
White/grey
Usage:
filter housing for loading membrane
Product name:
3013 membrane housing
Size:
3.0 inch & 13 inch
Material:
Food-grade Plastic PP
Capacity:
400-600 GPD membrane available
Function:
work with flow restrictor +one way valve
Item name:
pressure vessel 3013 400 RO membrane housing
Use:
Household Pre-Filtration
Certification:
ce
Type:
Reverse Osmosis
Membrane housing 3012/3013
Our membrane housings are designed and manufactured to accept spiral/hollow fiber/ceramic and tuber membranes. They are used in commercial water treatment and industrial liquid treatment worldwide.
Commercial Water TreatmentPharmaceutical water treatmentDialysis water treatmentDairy ProductsFood and BeverageMining wastewater treatmentSpecial separationThis reverse osmosis membrane element equips direct-process domestic reverse osmosis equipment to provide consistent performance with long service life. It is compatible with all 3013 membrane holders.This membrane is intended to operate in an osmosis system with a direct flow, without a tank.Notes: Permeate of a single element may vary within [-20%] ~ [+20%] Dimensions: 1.0 inch = 25.4 mm
15d
Mbombela / Nelspruit1
R 1,612.12
SavedSave
Please note that shipping and installation is not included.
PRODUCT DESCRIPTION
First thing to remember is that he membrane housing 4040 FRP – end port is designed for continuous, long-term use in reverse osmosis and ultra filtration applications. In industrial and commercial water treatment systems at a pressure of 300 PSI.
The permissible working range is -7 ℃ to 49℃.
The pressure of the membrane housing penetration test is 1.5 times the standard pressure.
PRODUCT BENEFIT
100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultra filtration, & Nano filtration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″4040 FRP 300psi ro membrane housing end entry and side entry4″ FRP membrane housingMaterial: FRPEnd cap material: ABSMax. working pressure: 300psi, 450psi, 600psi, 800psi,1000psiInlet port: 3/4″Outlet port: 1/2″So , the membrane housing 4040 FRP is a pressure vessel. In effect which is used for loading membrane elements in a RO water treatment system. The material of the membrane housing is divided into three types, such as FRP, stainless steel, and PVC.Membrane housing is relatively standard across the industry, it is made with high-quality components and o-rings, which is the perfect option for building your RO/DI system or replacing worn-out membrane housing.The membrane pressure vessels or membrane housings of Ro Aqua can achieve a variety of sizes, cover styles, pressure levels, and side or end inlet designs.
15d
Mbombela / Nelspruit1
R 1
NEGOTIABLE
SavedSave
When water security matters, you need a tank that’s engineered to perform — not just store water.
Our Steel Tanks offer:
✔ Large capacities (50,000L – 5,000,000L+)
✔ Engineered for agricultural & industrial use
✔ Fire protection compliant options
✔ Durable steel construction
✔ Fast, professional installation
✔ Long-term reliability you can trust
Whether it’s for irrigation, mining operations, processing plants, or fire protection — we design storage solutions that are built to last.
Inbox me to order.
15d
Sandton1
R 1,726.38
SavedSave
Please note that shipping and installation is not included.
PRODUCT DESCRIPTION
First thing to remember is that the membrane housing First Line 4040 FRP – end port is designed for continuous, long-term use in reverse osmosis and ultra filtration applications. In industrial and commercial water treatment systems at a pressure of 300 PSI.The permissible working range is 10 ℃ to 49℃. The pressure of the membrane housing penetration test is 1.5 times the standard pressure.PRODUCT BENEFIT100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultra filtration, & Nano filtration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″
4040 FRP 300psi RO membrane housing end entry and side entry4″ FRP membrane housingMaterial: FRPEnd cap material: ABSMax. working pressure: 300psi, 450psi, 600psi, 800psi,1000psiInlet port: 3/4″Outlet port: 1/2″So, the membrane housing First Line 4040 FRP – end port is a pressure vessel. In effect which is used for loading membrane elements in a RO water treatment system. The material of the membrane housing is divided into three types, such as FRP, stainless steel, and PVC.Membrane housing is relatively standard across the industry, it is made with high-quality components and o-rings, which is the perfect option for building your RO/DI system or replacing worn-out membrane housing.The membrane pressure vessels or membrane housings of RO Aqua can achieve a variety of sizes, cover styles, pressure levels, and side or end inlet designs.
15d
Mbombela / Nelspruit1
R 2,681.48
SavedSave
Please note that shipping and installation is not included.
PRODUCT DESCRIPTION
First thing to remember is that the membrane housing First Line 4040 FRP – opposite side port is designed for continuous, long-term use in reverse osmosis and ultra filtration applications. In industrial and commercial water treatment systems at a pressure of 300 PSI.The permissible working range is 10 ℃ to 49℃. The pressure of the membrane housing penetration test is 1.5 times the standard pressure.PRODUCT BENEFIT
100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultrafiltration, & Nanofiltration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″
Membrane housing First Line 4040 FRP – opposite side port
4″ FRP membrane housingMaterial: FRPEnd cap material: ABSMax. working pressure: 300psi, 450psi, 600psi, 800psi,1000psiInlet port: 3/4″Outlet port: 1/2″So, the membrane housing 4040 FRP is a pressure vessel. In effect which is used for loading membrane elements in a RO water treatment system. The material of the membrane housing is divided into three types, such as FRP, stainless steel, and PVC.Membrane housing is relatively standard across the industry, it is made with high-quality components and o-rings, which is the perfect option for building your RO/DI system or replacing worn-out membrane housing.The membrane pressure vessels or membrane housings of Ro Aqua can achieve a variety of sizes, cover styles, pressure levels, and side or end inlet designs.
15d
Mbombela / Nelspruit1
R 2,334.96
SavedSave
Please note that shipping and installation is not included.
PRODUCT DESCRIPTION
First thing to remember is that the membrane housing First Line 4040 FRP – same side port is designed for continuous, long-term use in reverse osmosis and ultra filtration applications. In industrial and commercial water treatment systems at a pressure of 300 PSI.The permissible working range is 10 ℃ to 49℃. The pressure of the membrane housing penetration test is 1.5 times the standard pressure.PRODUCT BENEFIT
100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultra filtration, & Nano filtration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″
4040 FRP 300psi ro membrane housing end entry and side entry
4″ FRP membrane housingMaterial: FRPEnd cap material: ABSMax. working pressure: 300psi, 450psi, 600psi, 800psi,1000psiInlet port: 3/4″Outlet port: 1/2″So Membrane housing 4040 FRP is a pressure vessel. In effect which is used for loading membrane elements in a RO water treatment system. The material of the membrane housing is divided into three types, such as FRP, stainless steel, and PVC.
Membrane housing is relatively standard across the industry, it is made with high-quality components and o-rings, which is the perfect option for building your RO/DI system or replacing worn-out membrane housing.The membrane pressure vessels or membrane housings of Ro Aqua can achieve a variety of sizes, cover styles, pressure levels, and side or end inlet designs.
15d
Mbombela / Nelspruit1
R 2,883.92
SavedSave
Please note that shipping and installation is not included.
PRODUCT DESCRIPTION
First thing to remember is that the membrane housing First Line 4040 x 2 elements FRP – end port is designed for continuous, long-term use in reverse osmosis and ultra filtration applications. In industrial and commercial water treatment systems at a pressure of 300 PSI.The permissible working range is 10 ℃ to 49℃. The pressure of the membrane housing penetration test is 1.5 times the standard pressure.PRODUCT BENEFIT100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultrafiltration, & Nanofiltration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″Membrane housing First Line 4040 x 2 elements FRP – end port
4″ FRP membrane housingMaterial: FRPEnd cap material: ABSMax. working pressure: 300psi, 450psi, 600psi, 800psi,1000psiInlet port: 3/4″Outlet port: 1/2″So, the membrane housing 4040 FRP is a pressure vessel. In effect which is used for loading membrane elements in a RO water treatment system. The material of the membrane housing is divided into three types, such as FRP, stainless steel, and PVC.
Membrane housing is relatively standard across the industry, it is made with high-quality components and o-rings, which is the perfect option for building your RO/DI system or replacing worn-out membrane housing.The membrane pressure vessels or membrane housings of Ro Aqua can
achieve a variety of sizes, cover styles, pressure levels, and side or
end inlet designs.
15d
Mbombela / Nelspruit1
R 3,467.66
SavedSave
Please note that shipping and installation is not included.
PRODUCT DESCRIPTION
First thing to remember is that the membrane housing First Line 4040 x 2 elements FRP – opposite side port is designed for continuous, long-term use in reverse osmosis and ultra filtration applications. In industrial and commercial water treatment systems at a pressure of 300 PSI.The permissible working range is 10 ℃ to 49℃. The pressure of the membrane housing penetration test is 1.5 times the standard pressure.PRODUCT BENEFIT
100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultrafiltration, & Nano filtration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″Membrane housing First Line 4040 x 2 elements FRP – opposite side port
4″ FRP membrane housingMaterial: FRPEnd cap material: ABSMax. working pressure: 300psi, 450psi, 600psi, 800psi,1000psiInlet port: 3/4″Outlet port: 1/2″
So, the membrane housing 4040 FRP is a pressure vessel. In effect which is used for loading membrane elements in a RO water treatment system. The material of the membrane housing is divided into three types, such as FRP, stainless steel, and PVC.
Membrane housing is relatively standard across the industry, it is made with high-quality components and o-rings, which is the perfect option for building your RO/DI system or replacing worn-out membrane housing.The membrane pressure vessels or membrane housings of Ro Aqua can achieve a variety of sizes, cover styles, pressure levels, and side or end inlet designs.
15d
Mbombela / Nelspruit1
R 3,195.67
SavedSave
Please note that shipping and installation is not included.PRODUCT DESCRIPTION
First thing to remember is that the Membrane housing First Line 4040 x 2 elements FRP – same side port is designed for continuous, long-term use in reverse osmosis and ultra filtration applications. In industrial and commercial water treatment systems at a pressure of 300 PSI.
The permissible working range is 10 ℃ to 49℃.
The pressure of the membrane housing penetration test is 1.5 times the standard pressure.PRODUCT BENEFIT
100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultrafiltration, & Nanofiltration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″Membrane housing First Line 4040 x 2 elements FRP – same side port
4″ FRP membrane housingMaterial: FRPEnd cap material: ABSMax. working pressure: 300psi, 450psi, 600psi, 800psi,1000psiInlet port: 3/4″Outlet port: 1/2″
So, the membrane housing 4040 FRP is a pressure vessel. In effect which is used for loading membrane elements in a RO water treatment system. The material of the membrane housing is divided into three types, such as FRP, stainless steel, and PVC.
Membrane housing is relatively standard across the industry, it is made with high-quality components and o-rings, which is the perfect option for building your RO/DI system or replacing worn-out membrane housing.
The membrane pressure vessels or membrane housings of Ro Aqua can achieve a variety of sizes, cover styles, pressure levels, and side or end inlet designs.
15d
Mbombela / Nelspruit1
R 4,828.90
SavedSave
Please note that shipping and installation is not included.First thing to remember is that the membrane housing First Line 4040 x 3 elements FRP – 3 side port is designed for continuous, long-term use in reverse osmosis and ultra filtration applications. In industrial and commercial water treatment systems at a pressure of 300 PSI.The permissible working range is 10 ℃ to 49℃. The pressure of the membrane housing penetration test is 1.5 times the standard pressure.
PRODUCT BENEFIT
100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultra filtration, & Nano filtration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″Membrane housing First Line 4040 x 3 elements FRP – 3 side port
4″ FRP membrane housingMaterial: FRPEnd cap material: ABSMax. working pressure: 300psi, 450psi, 600psi, 800psi,1000psiInlet port: 3/4″Outlet port: 1/2″So, the membrane housing 4040 FRP is a pressure vessel. In effect which is used for loading membrane elements in a RO water treatment system. The material of the membrane housing is divided into three types, such as FRP, stainless steel, and PVC.Membrane housing is relatively standard across the industry, it is made with high-quality components and o-rings, which is the perfect option for building your RO/DI system or replacing worn-out membrane housing. The membrane pressure vessels or membrane housings of RO Aqua can achieve a variety of sizes, cover styles, pressure levels, and side or end inlet designs.
15d
Mbombela / Nelspruit1
R 4,467.47
SavedSave
Please note that shipping and installation is not included.First thing to remember is that the membrane housing First Line 4040 x 2 elements FRP – opposite side port is designed for continuous, long-term use in reverse osmosis and ultra filtration applications. In industrial and commercial water treatment systems at a pressure of 300 PSI.The permissible working range is 10 ℃ to 49℃. The pressure of the membrane housing penetration test is 1.5 times the standard pressure.
PRODUCT BENEFIT
100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultra filtration, & Nano filtration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″Membrane housing First Line 4040 x 3 elements FRP – opposite side port
4″ FRP membrane housing
Material: FRPEnd cap material: ABSMax. working pressure: 300psi, 450psi, 600psi, 800psi,1000psiInlet port: 3/4″Outlet port: 1/2″So, the membrane housing 4040 FRP is a pressure vessel. In effect which is used for loading membrane elements in a RO water treatment system. The material of the membrane housing is divided into three types, such as FRP, stainless steel, and PVC.Membrane housing is relatively standard across the industry, it is made with high-quality components and o-rings, which is the perfect option for building your RO/DI system or replacing worn-out membrane housing. The membrane pressure vessels or membrane housings of Ro Aqua can
achieve a variety of sizes, cover styles, pressure levels, and side or
end inlet designs.
15d
Mbombela / NelspruitSave this search and get notified
when new items are posted!
