Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Results for environmental jobs in General Worker Jobs in Eastern Cape
1
SavedSave
A vacancy exists for a Quality Manager based at Life Beacon Bay Hospital reporting to the Hospital Manager and Regional Manager Exec, Mathews Moavodi. The successful candidate will be the custodian, together with the Hospital Manager/Regional Manager Exec, of the Integrated Quality and Environmental Management system and its effectiveness, and for coordinating quality efforts in support of the hospital management team
· Ensure the hospital quality and environmental sustainability objectives and targets are reviewed annually and aligned to the Group objectives. · Communicate the quality and environmental sustainability targets and focus areas to the hospital management and staff. · Conduct training within the hospital to ensure that management and staff understand the quality and environmental requirements. · Conduct risk assessments on an annual basis, together with HOD’s and Unit managers, in accordance with legal requirements. · Conduct environmental aspect/impact assessment together with the Engineering/Services Manager. · Manage reporting, investigation and close out any quality and environmental incidents and deviations in conjunction with Heads of Departments. · Measure performance against the quality objectives, evaluate the results and take/coordinate corrective action where necessary, together with relevant hospital Heads of Department. · Ensure that quality data is accurately recorded, the statistics analysed and trends and risks identified. · Generate the hospital quality scorecard and monthly quality reports. · Collate presentation and communicate the feedback on quality trends, risks, incidents and corrective action taken at hospital Quality Review Meetings. · Guide the Hospital Manager on safety related issues in order to ensure that the legal requirements are adhered to for staff safety; and that employee injuries and occupational disease are reported. · Coordinate the hospital Health & Safety Committee meetings, and ensure all legal appointments are made and legal requirements adhered to. · Together with the Infection prevention specialist/coordinator ensure that the disposal of waste within the hospital meets quality and environmental regulations and standards. · Manage the hospital Emergency and Disaster Plan and practices. · Monitor and ensure governance of the quality document control process within the hospital. · Participate in the internal and external audit review process, coordinate the corrective action and close out any findings related to quality and environment with the relevant Heads of Department. · Monitor and report on actions taken on trends identified through Patient Experience Management and Customer Relationship management system. · Support and participate in Patient Experience initiatives.
*Competencies:*· Problem-solving, analysis and judgement · Resilience · V
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI2MTQ0X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1191335&xid=1555_26144
2y
1
Job Description and Responsibilities:Design and install new plant concepts by following engineering principles, creating 3D and 2D CAD models, raising enquiry requests, conducting site meetings and selecting preferred suppliers.Running, monitoring and reporting on installation commissioning and report final sign-off to Management.Carry out maintenance on existing plant and equipment by following a preventative maintenance system.Procure the required components and equipment from external suppliers in accordance with the standard company purchasing system.Analyse failed plant and equipment for reasons for failure, and recommend and implement new processes and procedures in order to prevent such failures from reoccurring.Provide input into Financial Planning Rounds for CAPEX expenditure.Comply with and implement the statutory legal, safety and environmental requirements as applicable to the engineering test facility.Review power and water usage of the facility, and provide input into methods, processes and procedures to reduce water and energy consumption.Implement and co-ordinate the annual IS09001 calibration and certification activities for the engineering test facility.Keep the faculties up to current company Group standards.Maintain a detailed record of the facility by means of drawing records, CAD models and equipment documentation.Train fellow engineers in the use and operation of the engineering test facility.Education and Experience:Have a minimum of Bachelor of Science Degree in Mechanical Engineering.At least 5 years’ experience in the development and maintenance of facilities, control systems and equipment.A minimum of 3 years as a Senior Engineer performing design and Test engineering functions.
Skills, Attributes & Other requirements:In-depth knowledge of general mechanical engineering concepts with specific focus on Heating, Ventilation and Air-conditioning systems, mechanical equipment design and fabrication, heat transfer, instrumentation systems, software control and electrical power systems.
Insight and knowledge into technical engineering concepts.Specialized computer literacy with specific reference to 3D-CAD competence.Excellent report writing and presentation ability.Human relations (negotiation and patience).Innovation when faced with resource limitations.Knowledge of corporate procurement and Capex approval systems.Ability to solve complex mechanical engineering problems.Ability to plan and execute projects.Ability to identify risks, analyse them and setup planning to minimize risk.Ability to monitor, follow-up the project progress, to identify major project issues, and to escalate when necessary
Please forward CV and ALL supporting docum...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODQyODM0ODg1P3NvdXJjZT1ndW10cmVl&jid=1294690&xid=3842834885
4d
1
Overview:
The incumbent will be responsible for the execution and management of the organisation’s facilities management function in line with strategic mandate.The role focuses on strategy and governance, facilities management, contract management, budget management, customer/stakeholder management, monitoring and reporting, and building a professional team.The incumbent will therefore be responsible for overseeing the organisation’s Facilities Management portfolio which includes driving and managing functions relating to preventative property maintenance; adhoc property maintenance; internal infrastructure operations (water, electricity, etc.); installation and maintenance of fixtures; effective facilities management of organisational environment and immediate external environment and parameters; office premises cleaning, fumigation services and occupational health and safety services; procurement and contract management relating to security services; and interventions relating to emergency action response approval and associated repairs.The work of the incumbent shall thus entail overseeing and driving pre planning which includes assessment of the condition of facilities, determination of required works, costing and recommendations for inclusion of the same in budget processes, preparation of specifications for the required repairs & maintenance, monitoring of the performance of service providers and authorisation of payments.The incumbent will also be expected on annual basis to develop and ensure implementation of maintenance plans as well as reporting to the relevant structures.
Minimum Requirements:
Degree in Civil Engineering, Quantity Surveying , Architecture or Built EnvironmentRelevant post-graduate qualification OR professional registration / Pr Eng / Pr QS / Pr Arch.8+ years relevant experience of which 5 years should be in the built environment or facilities maintenance/management at middle management or senior consultancy level.An in-depth understanding of facilities management, advanced project and maintenance management, sound understanding of Health, Safety and Environmental legislation and its application to the built environment; as well as working with multi-disciplinary teams is a pre-requisite.
Key Performance Areas:
Strategy and Governance
Develop facilities management unit operational plans in line with the legislated requirements, and activities undertaken to ensure deliver...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zNTE2NzU1MzU5P3NvdXJjZT1ndW10cmVl&jid=1716688&xid=3516755359
4d
1
Department: ManufacturingReporting To: Manufacturing Director
Purpose of the Job:
To monitor and manage the energy efficiency of the organization by implementing conservation measures, monitor energy consumption, assess business decisions for sustainability and seek out opportunities for increasing energy efficiency.Develop and monitor improvement processes andperformance within their organization
Energy Management:• Develop and Implement Energy-Saving Strategies.• Implement energy-related cost-saving measures.• Calculate the budget, project energy savings, and identify the goals for each project.• Calculating current energy costs as well as the potential savings of upcoming projects.• Prepare budget reports and cost estimates.• Devise a strategy for reducing energy costs and environmental impact.• Coordinate Sustainability Programmes, including committees, ESG reporting and Sustainable Development Activities.• Ensure achievement and compliance with ISO 50001 certification.• Coordinate Management reviews for Energy Management Systems.• Coordinate energy committee and energy champions.• Develop a programme of energy-saving projects.• Maintain a register of energy-saving opportunities.• Keep abreast of potential energy and water saving products.• Collect and collate demand profile data from electricity suppliers and corresponding data for fuel consumption.• Conduct or arrange energy audits and surveys, performance tests and investigations.• Collate comparative data and yardstick figures for benchmarking purposes.• Participate in energy benchmarking groups.
Provide training on Energy Saving, Energy Management & Improving the Use of Energy & Resources for all plants.• Perform Energy Audits at various facilities for energy efficiencies.• Create and oversee the implementation of short and long-term projects and strategies that increase energy efficiency, reduce greenhouse gas emissions and minimize unnecessary consumption.• Carbon footprint reduction initiatives.• Help the Energy Team to identify progress and setbacks at each plant.• Provides technical analysis/review for energy projects and project risk assessment.• Identify and establish working relationships with all engineering departments to execute energy recommendations.• Member of Group sustainability working group
Continuous Improvement (CI):• Analyzing company processes and procedures.• Developing process enhancement strategies.• Establishing norms and standards of company performance.• Collaborating with other stakeholders to enhance productivity and staff satisfaction.• Communicating ideas and opinions to other members of management.• Training, m...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMDE5NjAwODMyP3NvdXJjZT1ndW10cmVl&jid=1734294&xid=2019600832
4d
1
SavedSave
Duties and Responsibilities:
Lead and manage the maintenance department, ensuring smooth and efficient operationsDevelop and implement preventative maintenance and continuous improvement programs to minimize downtime and optimize equipment performanceMaintain OEE on all equipment in line with company specificationsCoordinate and supervise maintenance activities, including routine inspections, repairs, and equipment overhaulsProvide technical expertise and guidance to the maintenance team, troubleshooting complex issues as they ariseMonitor and maintain inventory of spare parts, ensuring availability for timely repairs and replacementsManagement of contractorsEnsure that the maintenance function operates in accordance with the relevant legislation, including but not limited to OHS Act and By-Laws. Ensure adherence with all health, safety and environmental policies and procedures to ensure the safety and wellbeing of staff and visitorsKeep maintenance logs and report on daily activitiesInspect building structures to determine the need for repairs or renovations. Oversee building projects and renovationsReview utility consumption and strive to minimize costsEnsuring that facilities meet government regulations, health and security standards and energy efficiency requirements.Identification of training needs for subordinates to aid achieving objectives
Qualification and Experience:
A Matric CertificateDiploma/Degree in Mechanical/Electrical Engineering or equivalent10+ years working experience in plant maintenance, preferably in the Automotive industry, with 3 years in a managerial position
Knowledge, Skills and Abilities:
Experience in planning maintenance operationsStrong knowledge of engineering concepts, including electrical, hydraulics and mechanical systemsStrong knowledge of tooling, equipment, engineering specifications, and cost reduction methods in automotive applications·Working knowledge of the IATF 16949, ISO45001 and ISO14001 standardsSound knowledge of the OHS ActProblem-solving and analytical SkillsPlanning and Organisational SkillsKnowledge of facilities managementProficiency in MS Office applicationsExcellent verbal and written communications skillsKnowledge of ERP systemsAttention to detailfAbility to handle multiple tasks in a fast-paced, team-oriented and multi-cultural environmentGood interpersonal skillsGood presentation skills
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS85NDYxNTA5MDU/c291cmNlPWd1bXRyZWU=&jid=1677164&xid=946150905
4d
1
SavedSave
Our client in the Manufacturing industry based in Port Elizabeth is currently looking to employ a CNC Toolmaker/ Programmer.
An awesome career opportunity awaits.
Requirements:
Qualified Tool Jig and Die Maker or relevant Trade essential to positionMinimum N3.Minimum 5 years’ experience in Die Maintenance / Tooling.Thorough knowledge of Tooling in Production Environment.TIG Welding and Conventional Lathe experience, CNC programming, setup, and machining to specification.Knowledge of Quality SpecificationsMinimum 5 years’ experience in CNC set ups and programming – on Milling and Lathe CNC
Responsibilities:
Compile and submit the required Maintenance change-over schedule based on shot count performance, recorded at each Demo to the Foundry Manager daily, schedule replacement moulds as per policy.Complete Trial Proposal or Engineering Change Request documentation illustrating the required changes.Record equipment breakdowns by completing a Maintenance Job Card and submitting this to Maintenance Artisan.Plan Material requirements for machining purposes, ensuring best quality or protocol is maintained.Liaise with Supervisor, to ensure machining programs are correct, settings accurate and tooling allocation appropriate.Assist with basic Machine maintenance and/or problem solving as and when required to assist or provide input.Provide and maintain the foundry with tooling to achieve the production plan.Plan and schedule work for shift artisans when needed.Programming on CNC machines, with DXF, VQC or manual programming.Strictly adhere to the health, safety and Environmental (HSE) policy of the Company.
Other Requirements:
Excellent attendance record and Impeccable disciplinary record.Ability to read and interpret engineering drawings.Computer literacy – Excel and Word.CNC programming, Setups, G- Codes and M-Codes.Good decision making and problem-solving skills and ability to work under pressure.Willing to work over weekends and to assist on shifts as and when required.Good Communication Skills with Strong Problem-Solving Skills.
Please note should you not receive a response within two weeks of applying please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNTE3ODU4NDAxP3NvdXJjZT1ndW10cmVl&jid=1474611&xid=2517858401
4d
1
SavedSave
Our client in the Automotive Industry based in Port Elizabeth is currently looking to employ a Safety Officer.
An awesome career opportunity awaits!
Requirements:
Grade 12 Certificate.National Diploma in Safety Management (preferable) or equivalent and / or at least SAMTRAC.OHS Act – knowledge of requirements.Knowledge of safety systems (DIFR, IOD reporting etc.)A minimum of 3 years’ work related experience in a manufacturing environment.The successful candidate will be computer literate especially in MS Office Suite (specifically MS Word and MS Excel), and have business presentation and reporting skills.
Responsibilities:
Ensure that the provisions of the OSH Act and its regulations, pertinent to the site and its processes are complied with in the workplace.Ensure that the provisions of environmental legislation, pertinent to the site and its activities and processes are complied with.Provide a comprehensive HSE consulting service and advice to the manufacturing plants in consultation with the SHEEQ Manager.Investigate and report on incidents in the workplace and devise and implement strategies for preventative measures.Conduct regular HIRA as well as environmental aspects and impact assessments and update SWP’s and SOP’s.Assist with annual HSE induction on all employees and do incidental HSE Induction throughout the year as well as training of employees.Conduct monthly housekeeping assessments.Assist with scheduled internal audits on activities and processes of the site and report on findings of such audits.Devise action plans to deal with non- compliances.Assist in preparing plants for external HSE audits.Attend daily production meetings.Attend weekly meetings with the SHEEQ Manager.Attend monthly HSE meetings.Supervise the HSE representatives.Any other HSE related matters as instructed by the Site Compliance manager or manufacturing Director of the site.Execute daily audits (Safety, ergonomics, environmental).Document Control.Investigation of IOD’s, accidents and injuries.Conduct job hazard analysis.Assist with daily administration functions.Perform any other duties that are commensurate with the position.
Please note should you not receive a response within two weeks of applying please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNzA4NjUxNjEzP3NvdXJjZT1ndW10cmVl&jid=1470655&xid=1708651613
4d
1
SavedSave
Our client in the Agriculture industry based in Kirkwood is currently looking to employ an Artisan.
An awesome career opportunity awaits.
Requirements:
Must have Supervisory Experience.Must N3 in Mechanical.Qualified Artisan.Must have own tools.Must demonstrate technical ability.Knowledge of occupational health and safety requirements.Must have a driver’s licence.Own reliable transport.
Responsibilities:
Ensure equipment uptime.Execute maintenance tasks.Mentor and assist other artisans.Ensure compliance to the OHS Act, Quality and Environmental Standards.Water Treatment.Boiler Operator.Able to weld.Able to Read Drawings.Refrigerator Skills.Problem Solving Contribution.
Please note should you not receive a response within two weeks of applying please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNDUxODI0OD9zb3VyY2U9Z3VtdHJlZQ==&jid=1474609&xid=24518248
4d
1
SavedSave
Our client in the Logistics Sector based in Port Elizabeth, is looking to employ a Diesel Mechanic.
An awesome career opportunity awaits.
Requirements:
Grade 12.Trade tested.2-3 years’ experience in workshop environment maintaining and repairing truck.Able to complete forms related to own working area.Can complete administrative procedures with necessary directions and systems at disposal.Able to apply business knowledge applicable town work processes / functions executed under direct supervision / guidance.Able to apply computer knowledge relevant to own job functions under general supervision.Able to enter and access work related information via PC or terminal for own work responsibilities / functions.Able to utilize different PC functions with general guidance / direction in place.Able to apply basic environmental procedures relevant to own work function under direct supervision.Able to identify environmental hazards and deal with it with direct guidance and instructions in place.Able to apply health and safety procedures in own work area with general guidance / supervision in place.Able to take corrective action when required with general guidance in place.Able to identify and select relevant material and equipment needed.
Responsibilities:
To carry out services, maintenance, and repairs on all vehicles as per job card.To make sure the hourly rates on repairs and services are adhered to.To attend to breakdowns during office or after hours and do fault finding on vehicles.To visually inspect available vehicles in the depot before they leave and attend to any identified repairs.To sign off job cards, tick of service schedules, book all spares used on job card i.e.: engine oils.Manage and report on WIP.Identify and report any abuse in the prescribed format to management.To ensure parts stock holding are maintained in order to prevent vehicle down time due to part shortages.To make sure vehicles are out of gear before starting, trestles to be used when required.Regular feedback to management as required.Conduct tyre maintenance, tyre surveys and tyre breakdowns as required.To ensure a safe and clean work area and PPE to be worn at all times.
Please note should you not receive a response within two weeks of applying please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMjU0NzIxNzYyP3NvdXJjZT1ndW10cmVl&jid=1482456&xid=2254721762
4d
1
SavedSave
TOP JOB ALERT - MANUFACTURING
Our client in the Automotive Sector, based in Port Elizabeth is currently looking to employ a experienced QSHER Manager.
An awesome career opportunity awaits.
Job Purpose:
To ensure that the quality, environmental and Health and safety management systems are maintained by making use of available resources. The role has responsibility for Quality, Safety, Health, Environment and Risk management.
Requirements:
Grade 12 with a recognized Qsher systems related and tertiary technical qualification.Important that the person has TS16949 and Ford Q1-2002 experience.Quality and Mechanical Engineering qualifications preferred.Senior management experience in a similar position in the automotive industry.Computer literate with extensive to MS-Office and Lotus Notes.
Responsibilities:
Manufacturing Inspection.Bought-out Material and components.Quality Assurance system.Control in using the S.P.C toolWarranty Claims.QSHER Budget.Management of the Employees.Safety, Health, Environment and Risk Management.
Please note should you not receive a response within two weeks of applying please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS82MTc3ODY3NjY/c291cmNlPWd1bXRyZWU=&jid=1417156&xid=617786766
4d
1
Successful incumbent will be responsible for ensuring effective and efficient Administration support is provided with regards to the Fleet and Maintenance activities within the Zone.
**Key Perfomance Areas**
* Fleet Administration
* Maintenance Administration
* Financial Management
* Customer Relations
* Quality Management and Operational Requirements
**Competencies Required**
* Analytical Thinking and Attention to Detail
* Change Management
* Customer Service Orientation
* Motivating People
* Ethical behaviour
* Technical Skills/ Competence:
* Problem Solving
* Excellent Orientation
* Teamwork
* Assertiveness
* Personal Development
* Flexibility/Adaptability
* Drive and belief in the cause
* Administrative Skills
* Technical Competence: SAP Skills
* Relationship Building
* Systems Competence
* Planning, Organising and Monitoring
* Communication
**Equity Statement:**
*
** 1. All applications will be considered with reference to SANBS Employment Equity Plan
2. Please consider your application unsuccessful should you not be contacted within three weeks after the closing date
*
*Furthermore note that no advertisement may in any way make reference to /or exclude anybody based on race, gender etc.*
*Education:* *
*
* Qualification in Facilities Management and Fleet Administration or any related qualification.
* Drivers License EB/B
*Experience:*
* 3 years’ experience in Facilities and Fleet Administration environment.
* SAP & SRM Literate.
* Computer Literacy (Office Suite).
*Other (knowledge and skills)*
* OHS Act
* Building & Construction Regulation
* Environmental Management Act
* Road Traffic Act
*Education:* *
*
* Qualification in Facilities Management and Fleet Administration or any related qualification.
* Drivers License EB/B
*Experience:*
* 3 years’ experience in Facilities and Fleet Administration environment.
* SAP & SRM Literate.
* Computer Literacy (Office Suite).
*Other (knowledge and skills)*
* OHS Act
* Building & Construction Regulation
* Environmental Management Act
* Road Traffic Act
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzUzMTgyX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1241029&xid=1555_53182
2y
1
SavedSave
Duties: Production PlanningCo-coordinating all activities of the department including shiftsOrdering and ensuring raw materials conform to process requirementsEnsure machines are utilized efficiently in order to meet set targetsCheck quality and record and report deviations (ISO TS 16949)Ensure all health, safety and environmental standards are maintainedPlan machine maintenance downtime in consultation with MaintenanceConduct training and appraising of employeesEnsure all departmental budgets are metControl material utilization and minimize wasteProvide good customer service and communicationPromote good employee relationsComplete daily reports accurately and on timeDeal with daily industrial relation problemsEnsure all manufacturing systems are maintainedEnsure the factory is opened and closed dailyCarry out monthly stock takesApply & enforce principlesRequirements: National Diploma or other relevant qualificationMinimum 3 years experience in manufacturing environmentGood technical product and process knowledgeStrong communication skills in the English languageAbility to plan, organize and controlAbility to motivate a workforceAbility to work as a team playerAbility to work with minimal supervisionSelf-disciplinedGood communicatorHonest, punctual and reliable
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzkzNzE4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1239209&xid=1109_93718
2y
1
Our client has a position available in their company for a Business Unit Manager, within the Utilities and Energy department. This position is based in Middelburg, Mpumalanga. Requirements: This role demands a bachelor’s degree with a minimum of 12 – 14 years as an Engineer and 10 years’ experience in people management.Must have extensive knowledge in OSHACT, LRA (1995), BCEA, Environmental legislation.Self-motivated with a good work ethic, strong leadership qualities and excellent analytical skills.Strategic, analytical, and decisive thinker to thrive and work across disciplines.Ability to work under pressure and manage complexity.Experience in setting and managing teams’ key performance indicators.Experience in managing budgets (personnel and operational budgets).Excellent negotiation and report writing skills with ability to manage relations with internal and external suppliers.Ability to coach and lead professional, skilled and resourceful teams.Strive to continuously improve processes, people, and oneself. Responsibilities: Ensure low cost of production of Utilities and Service Department with specific focus on energy, and Utility costs.Ensure compliance to all legislation (OSHACT, LRA (1995), BCEA, Environmental legislation, ISO 9001, etc.Effectively managing and leading a team of diverse employees; ensuring competence, adherence to company values, relevant policies, and procedures.Facilitating improvement projects relating to Utilities processes and provide suitable technical advice to teams and conducting investigations and promptly rectifies problems and deviations.Managing systems data integrity, monthly budget and daily costs for the section, availability and utilisation of consumables, and cost saving projects.Develop the condition monitoring department function to apply predictive maintenance principles.Proactively manage the reliability and efficiency of the Utilities and Service Department: Water and Effluent treatment, boilers, compressors and able piping reticulation, vehicles, high tension reticulation and buildings.Initiate and drive the Sustainability projects for the Company. If you are not contacted within two weeks of applying, please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzY0OTE5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1237177&xid=1108_64919
2y
1
SavedSave
Our client is seeking a Project Manager responsible for the implementation of investment projects throughout the plant while considering key aspects such as plant performance, quality, safety, scope time and cost. Need to have leadership skills, strategic thinking, be customer orientated with good communication skills. General business orientation and financial comprehension of department and plant costs. Open position : Project ManagerLocation : Port ElizabethSalary : Market relatedType : Contract positionReporting to : Engineering Manager Job requirements :Degree/Diploma in Electrical/Mechanical Engineering5 years machine commissioning experience if possible in manufacturing industryHas lead several machine improvement, refurbishment, upgrade or installation project2 of 3 years experience in managing a small group of individualsGovernment regulations (OHS, environmental, building regulations, SABS, ISO)Technical pneumatic, hydraulic and mechanical knowledgeAdvanced Auto CADTechnical Controls & Drives knowledgeAdvanced MS-Office software and Lotus notesAssertiveness with external suppliersGeneral knowledge about utilities & civil construction Duties :Develop and standardise procedures and methods to improve the efficiency and effectiveness of the implementation and realisation of projects.Continuous improvement on project KPIs such as on time delivery, budget cost and spend forecasting.Ensures all plant investment projects are performed according to technical, timing and financial requirements with consideration of company rules & guidelines.Steers the team and controls the project regarding the results for development, quality, dates and costs.Responsible for the project budget.Represents the project internally and externally regarding all aspects (customer, supplier).Manages project changes and issues and prevents project risks by defining and implementing appropriate countermeasures in agreement with the steering team.Ensure equipment standardization and compliance with Central EngineeringInitiate Engineering support request documents for Central Engineering support on Capital improvement projectsManage department fixed costsResponsible for Management and Control of Capital improvement project Budgets and CosMonitor and control change management requests on capital improvement projectsAdvise and assist project technicians and Engineers on various implementation itemsEnsure clear and accurate investment reports for all business units for plant operations reviewed, internal and external reviews.Ensure clear reports for all capital improvement projects for quarterly plant efficiency reviews.General reports on cost, time spending and deliverables of all investment projectsMonitor and control change management requests for all business units for plant operations review, internal and external reviews.Ensure clear reports for all capital improvement projects for quarterly plant efficiency reviews.General reports on cost, time, spending and del
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzUwODI0X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1192215&xid=1266_50824
2y
1
Our client in the Steel Manufacturing industry is looking for a Business Unit Manager - Utilities & Energy to join their team in Middelburg, Mpumalanga.Minimum requirements:Bachelor’s Degree with a minimum of 12 – 14 years as an Engineer and 10 years’ experience in people managementMust have extensive knowledge in OSHACT, LRA(1995), BCEA, Environmental legislationSelf-motivated with a good work ethic, strong leadership qualities and excellent analytical skillsStrategic, analytical and decisive thinker to thrive and work across disciplinesAbility to work under pressure and manage complexity.Experience in setting and managing teams key performance indicatorsExperience in managing budgets (personnel and operational budgets)Excellent negotiation and report writing skills with ability to manage relations with internal and external suppliersAbility to coach and lead professional, skilled and resourceful teamsStrive to continuously improve processes, people and oneself
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ2OTM2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1176272&xid=1266_46936
2y
1
SavedSave
Location: Port ElizabethSalary: commensurate with experience and qualificationQualifications / Requirements:Relevant Engineering Diploma / Degree with two years relevant experience in an Automotive Manufacturing environment orA relevant trade tested qualification with five years relevant experience in an Automotive Manufacturing EnvironmentPLC, Robotics, HVAC Clean Room Systems, Injection Moulding, BMC technologyJig design for technical services, paint processes and new projectsVacuum plating technology experience and knowledgeAutoCAD and project management experience is advantageousKey Performance Areas:Ensure continuous process improvement in cost, quality and productionGood knowledge base in automotive Process Failure Mode Effect Analysis (FMEA) and Control Plans, provide necessary technical input and problem-solving using 8D process for potential and actual process failuresGood knowledge base of IATF, ISO, quality and environmental systems, energy management systems and TPM standardsControl process engineering projects and resolves engineering problems with internal departments and OEMsProvide input to strategic decisions that affect the functional processes areas and new projectsDevelop Annual Capex budgetResolve problems arising from internal operations, OEM’s and requiring coordination Shift Process Engineers with other departments
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzUzMTkzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1200993&xid=1266_53193
2y
1
Our client in the Steel Manufacturing industry is looking for a Business Unit Manager - Utilities & Energy to join their team in Middelburg, Mpumalanga.Minimum requirements:Bachelor’s Degree with a minimum of 12 – 14 years as an Engineer and 10 years’ experience in people managementMust have extensive knowledge in OSHACT, LRA(1995), BCEA, Environmental legislationSelf-motivated with a good work ethic, strong leadership qualities and excellent analytical skillsStrategic, analytical and decisive thinker to thrive and work across disciplinesAbility to work under pressure and manage complexity.Experience in setting and managing teams key performance indicatorsExperience in managing budgets (personnel and operational budgets)Excellent negotiation and report writing skills with ability to manage relations with internal and external suppliersAbility to coach and lead professional, skilled and resourceful teamsStrive to continuously improve processes, people and oneself
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ5MTExX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1185588&xid=1266_49111
2y
1
SavedSave
Quality EngineerLarge global automotive company requires Quality Engineer to be based in their East London plant.Your role will include but not limited too:Safety, health, environment, and quality (SHEQ) responsible for ensuring compliance with health and safety regulations, environmental regulations, and quality controlTo be considered for this role, you will haveAt least 5 years’ successful experience in a similar quality management positionAuditing (internal and layered)Core tools (HIRA, FMEA, APQP, PPAP, Control Plans)Related Diploma or DegreeKnowledge of IATF, IRCA, SABS ISO, SHEQ ManagementGrade 12Attractive package on offer.Should you wish to apply please email your CV through to recruiter2@profilepersonnel.co.zaOnly shortlisted candidates will be contacted.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ1ODYxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1168948&xid=1266_45861
2y
FOR THE AUTOMOTIVE INDUSTRY
Purpose:
Audit & report on quality management system & to verify that the products are manufactured to specification of the customer
Personal Specifications:
· Excellent Communication skills &
interpersonal skills
· Ability to work any shift as well as rotating
shifts & weekends
· Strong organizational & administrative
skills
· Ability to multi-task
· Strong problem solving & conflict
management skills
· Have interactive skills & be able to
perform well under pressure
· Accuracy of work with attention to detail &
neatness
· Team Player
· Must willing to work shifts & overtime
where required
· Good command of English language
Qualifications &
Experience:
· Matric Certificate
or equivalent qualification
· MINIMUM 3 years Press Shop
Supervisor / Team Leader experience
Duties &
Responsibilities:
· 12 Months production
exp in a component manufacturing plant for the automotive industry
· Conduct internal
product audits & help with customer product audit
· Ensure corrective
actions are closed off within the required time & monitor daily, plan ahead
weekly
· Ensure that
operators manufacture parts to targets set & OEE requirements
· Notifies
the Shift Manager of any Jig/Machine malfunction immediately. Has authority to
stop production in this regard
· Checks product
visually or with checking fixture & notifies Manager of any
non-conformance
· Assist with PSW to
customers if & when required
· Ensure the last off
is left in welding jig for inspection
· Ensure correct
parts get packed into correct containers
· Conducts audit on
quality management systems
· Obey company safety
rules & report anything that seems unsafe to your Manager, or Safety
Representative
· Ensure compliance
to all Environmental rules, other requirements, regulations & legal
requirements as applicable to the company
· Comply with all
Safety regulations
· Ensure housekeeping
at the end of production & at the end of the shift is done
· Keeps machine &
working area clear of unnecessary equipment
· Makes sure that bin
cards are on the Containers/Stillages
· The incumbent will
be supervised daily, must be a self-starter & have a good self-management
skill to work independently with minimum of supervision
· Some errors may be
discovered before reaching the customer & other errors may only be
discovered by the customer
· Wear safety
equipment when working in designated areas
· Maintains quality
documentation systems
· Assist to generate
work-instruction & product specification documents
· Analyses &
maintains Statistical Process Control. (S.P.C)
· Maintains audit
schedules
· Assists with
solving quality related problems & customer plants
· Assists with quality development issues
· Assist quality staff in solving quality
problems online
· Assist with compilation & maintenance of
customer product files
· Assist with FMEA &
Capability Studies
· Authorised to
prevent non-conforming products from being shipped to the customer
EMAIL CV: scorocca@gmail.com
9d
1
SavedSave
Our prestigeous client has a position available in their company for a Safety Manager, based in Middelburg, Mpumalanga. Requirements: The successful incumbent will have a Tertiary (Diploma or Degree) qualification in Occupational Health and Safety with a minimum of 6 year SHE management experience.ISO14001 qualifications and 45001.In-depth knowledge of Behaviour Based Safety will be an added advantage.Strong SHE in-depth knowledge and skills are essential.Fully computer literate.Excellent organizing and planning skills.Interpersonal skills.Assertive and Attention to detail.Strong judgement and problem-solving skills.Strong interpersonal and communication skills.Engineering background will be an added advantage. Responsibilities: Ensure compliance with the OHSACT and Environmental Acts and Regulations.Advise management on applicable legal changes and the possible impact on the company.Implementation of Safety systems, ISO 45001, policies, procedures and standards and Behaviour based Safety programmes.Conducting and coordinating internal and external Safety management audits.Liaise with internal, external customers and relevant statutory bodies.Managing incident and accident investigations.Co-ordinate Safety Risk Assessments.Creating Safety awareness programmes.Developing, implementing, and reviewing all emergency plans.Manage Safety officers.SHE management reports. If you are not contacted within two weeks of applying, please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA4XzQ4OTM3X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1174627&xid=1108_48937
2y
Save this search and get notified
when new items are posted!
