Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Results for millwright job in Engineering & Architecture jobs in KwaZulu-Natal
1
*Well established Engineering company situated in Umboginitwini, south of Durban seeks a Mechanical Fitter with at least 5 years experience as a qualified Mechanical Fitter/Millwright.*
*Automotive industry is an advantage*
*Experience on mechanical presses and rotating equipment and PLC experience is essential*
* Fault finding and problem solving during equipment breakdowns.
* Preventative maintenance on machinery.
* Install and repair various types of mechanical equipment.
* Complete job cards and time sheets.
* Manage critical spares.
* Matric Certificate.
* Trade Tested fitter/millwright.
* At least 5 years as a qualified Mechanical Fitter/Millwright (in the automotive industry would be an added advantage).
* *Experience on mechanical presses and rotating equipment is essential*
* Millwright with PLC experience will be an added advantage.
* Strong technical skills.
* Good communication skills.
* Problem-solving skills.
* Understanding production equipment and processes.
Competitive salary plus benefits
Please note that only suitably qualified candidates will be contacted.
If you have had no response within 2 weeks your application was unsuccessful
* Matric Certificate.
* Trade Tested fitter/millwright.
* At least 5 years as a qualified Mechanical Fitter/Millwright (in the automotive industry would be an added advantage).
* *Experience on mechanical presses and rotating equipment is essential*
* Millwright with PLC experience will be an added advantage.
* Strong technical skills.
* Good communication skills.
* Problem-solving skills.
* Understanding production equipment and processes.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI0NzUwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1185927&xid=1555_24750
2y
- Permanent position available for a skilled Millwright with proven track record- Skills required to cover CNC Machines (All with Fanuc Controls), Conventional Machines, Hydraulics, Pneumatics, Electrical and Electronic- Assembling and installing machines then testing them to make sure they are working correctly- Must work in full compliance with the approved safety regulations- Managing the layout and placement of equipment and machinery in factory settings to ensure minimum downtime- Identifying and repairing problematic parts of a machine by running tests, making repairs, or installing new parts- Dismantling older machines and replacing them with new ones- Overseeing preventive maintenance by identifying and correcting potential issues, removing worn out pieces and lubricating mechanical partsPlease email detailed CV to rachael@rotacon.co.za, with traceable employment history and qualification records
7d
1
Engineering company are looking for a qualified millwright who has completed his apprenticeship and has 3-5 years’ experience, is able to read technical drawings, has advanced electrical knowledge, and has good mentorship and communication skill.
* What is your name?
* What is your telephone number?
* What is your highest level of education?
* How many years experience do you have as a maintenance millwright?
* Are you able to read drawings?
* What area do you live in?
* What was your last hourly rate/ salary?
* What hourly rate are you looking for?
* Have you ever attended an interview with RESOURCE recruitment before?
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzEyMzU0X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1149591&xid=1555_12354
2y
Ads in other locations
SavedSave
Client based on the East Rand has a vacancy for a Machine Tool Technician with Millwright Trade Test - MUST
come from Machine Tool industry
Trade Tested MillwrightMore than 4 years experience as Technician within the Machine Tool industrySolid Mechanical and Electrical experienceValid drivers licenseOwn vehicleExperience on various machinery i.e. Hand Held Lasers, XS Fiber Laser & Tube & Sheet Cutting Machines, CNC Plasma Cutting Machines, Milling Machines, CNC Milling Machines etc.Prepared to do field service duties and repairs on client sitesONLY apply if you meet ALL of the above requirements
Please consider your application unsuccessful if you do not hear from us within 2 weeks.
SECTOR: Engineering and Technical
Job Reference #: JHB000347/AH
3d
1
SavedSave
My moulding client is looking for a CNC Technician with Millwright experience
Must have 5 years of working experience in CNC MachinesPreferably with Okuma, Doosan, Fanuc and Mazak ControlsMust be willing to work late on breakdowns if needed, respond to callouts and work over weekendsKnowledge of high voltage switching will be an advantage
NB Applicants - Please Note:
We use Ditto to track and manage applications and can only accept online applications. If you are unable to apply through the link provided, please upload your CV to our website www.cfsrecruitment.co.za under VACANCIES. If the vacancy doesnt appear on the website, the position is no longer available.
The advertised salary range is merely a guideline in terms of the level of candidates required and it remains the prerogative of our client to offer a candidate any market-related salary in line with qualifications, skills, and level of experience.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMDEyMDc0NjE1P3NvdXJjZT1ndW10cmVl&jid=1298965&xid=1012074615
3d
1
SavedSave
My Engineering client in Germiston is looking for a Qualified Millwright
Minimum Requirements:
Qualified Millwright with trade test papers5 years of experience with CNC machines preferable with Okuma, Doosan, Fanuc and Mazak controlsKnowledge of high voltage switching will be an advantageWilling to work late on breakdowns if needed, respond to callouts and work over weekends.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODAwOTQyMDYyP3NvdXJjZT1ndW10cmVl&jid=1260942&xid=3800942062
3d
1
SavedSave
Our client based in the Northern Suburbs is seeking a Millwright to join their team.
Requirements:
Grade 12 or equivalent.
N2 â?? N3 Engineering qualification.
Trade test certificate.
+3 years experience in a production environment.
Ability to do physical labour and work at heights.
A valid driverâ??s licence.
Own reliable vehicle.
Willing to work overtime. (Shifts)
Responsibilities:
Read and interpret machine drawings to identify any problems.
Repairing of machinery as and when required (inclusive of breakdowns).
Service of machinery as per service guides.
Lubricate machinery as and when required.
Fitment of parts.
Ordering spares required to ensure machinery is maintained at an optimal condition.
Conduct preventative and routine maintenance as per machine guides.
Ensure that company tools and equipment are kept in a good condition.
Assist with production maintenance.
Assist with the training of Millwright Apprentices.
Ensure that machines are stopped if they are operating in an unsafe manner.
Ensure that the companyâ??s quality standards are met and maintained in terms of the efficiency of the companyâ??s machinery.
Adhere to the companyâ??s Health and Safety policies and procedures as well as relevant Health and Safety legislation.
Maintain general housekeeping.
Any other tasks and duties as assigned.
 To apply, please send your CV with your salary expectations to natasha@personastaff.co.za
 Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful. Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004610/N&source=gumtree
3d
1
SavedSave
Our client based in the Northern Suburbs is seeking a Millwright to join their team.
Requirements:
Grade 12 or equivalent.
N2 â?? N3 Engineering qualification.
Trade test certificate.
+3 years experience in a production environment.
Ability to do physical labour and work at heights.
A valid driverâ??s licence.
Own reliable vehicle.
Willing to work overtime. (Shifts)
Responsibilities:
Read and interpret machine drawings to identify any problems.
Repairing of machinery as and when required (inclusive of breakdowns).
Service of machinery as per service guides.
Lubricate machinery as and when required.
Fitment of parts.
Ordering spares required to ensure machinery is maintained at an optimal condition.
Conduct preventative and routine maintenance as per machine guides.
Ensure that company tools and equipment are kept in a good condition.
Assist with production maintenance.
Assist with the training of Millwright Apprentices.
Ensure that machines are stopped if they are operating in an unsafe manner.
Ensure that the companyâ??s quality standards are met and maintained in terms of the efficiency of the companyâ??s machinery.
Adhere to the companyâ??s Health and Safety policies and procedures as well as relevant Health and Safety legislation.
Maintain general housekeeping.
Any other tasks and duties as assigned.
 To apply, please send your CV with your salary expectations to hannah@personastaff.co.za
 Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful. Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004609/H&source=gumtree
3d
1
SavedSave
Our client based in the Northern Suburbs is seeking a Millwright to join their team.
Requirements:
Grade 12 or equivalent.
N2 – N3 Engineering qualification.
Trade test certificate.
+3 years experience in a production environment.
Ability to do physical labor and work at heights.
A valid driver’s license.
Own reliable vehicle.
Willing to work overtime. (Shifts)
Responsibilities:
Read and interpret machine drawings to identify any problems.
Repairing of machinery as and when required (inclusive of breakdowns).
Service of machinery as per service guides.
Lubricate machinery as and when required.
Fitment of parts.
Ordering spares required to ensure machinery is maintained at an optimal condition.
Conduct preventative and routine maintenance as per machine guides.
Ensure that company tools and equipment are kept in a good condition.
Assist with production maintenance.
Assist with the training of Millwright Apprentices.
Ensure that machines are stopped if they are operating in an unsafe manner.
Ensure that the company’s quality standards are met and maintained in terms of the efficiency of the company’s machinery.
Adhere to the company’s Health and Safety policies and procedures as well as relevant Health and Safety legislation.
Maintain general housekeeping.
Any other tasks and duties as assigned.
To apply, please send your CV with your salary expectations to hannah@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
hannah@personastaff.co.za
3d
1
SavedSave
Our client based in the Northern Suburbs is seeking a Millwright to join their team.
Requirements:
Grade 12 or equivalent.
N2 – N3 Engineering qualification.
Trade test certificate.
+3 years experience in a production environment.
Ability to do physical labour and work at heights.
A valid driver’s licence.
Own reliable vehicle.
Willing to work overtime. (Shifts)
Responsibilities:
Read and interpret machine drawings to identify any problems.
Repairing of machinery as and when required (inclusive of breakdowns).
Service of machinery as per service guides.
Lubricate machinery as and when required.
Fitment of parts.
Ordering spares required to ensure machinery is maintained at an optimal condition.
Conduct preventative and routine maintenance as per machine guides.
Ensure that company tools and equipment are kept in a good condition.
Assist with production maintenance.
Assist with the training of Millwright Apprentices.
Ensure that machines are stopped if they are operating in an unsafe manner.
Ensure that the company’s quality standards are met and maintained in terms of the efficiency of the company’s machinery.
Adhere to the company’s Health and Safety policies and procedures as well as relevant Health and Safety legislation.
Maintain general housekeeping.
Any other tasks and duties as assigned.
To apply, please send your CV with your salary expectations to julia@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful. Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004621/JH&source=gumtree
3d
1
SavedSave
Our client, award-winning specialists within their sector, located in the Northern Suburbs is looking to add an experienced Millwright to their team.
Requirements:
Grade 12 or equivalent.
N2 â?? N3 Engineering qualification.
Trade test certificate.
+3 years experience in a production environment.
Ability to do physical labour and work at heights.
A valid driverâ??s license.
Own a reliable vehicle.
Willing to work overtime. (Shifts)
Responsibilities:
Read and interpret machine drawings to identify any problems.
Repairing of machinery as and when required (inclusive of breakdowns).
Service of machinery as per service guides.
Lubricate machinery as and when required.
Fitment of parts.
Ordering spares required to ensure machinery is maintained at an optimal condition.
Conduct preventative and routine maintenance as per machine guides.
Ensure that company tools and equipment are kept in a good condition.
Assist with production maintenance.
Assist with the training of Millwright Apprentices.
Ensure that machines are stopped if they are operating in an unsafe manner.
Ensure that the companyâ??s quality standards are met and maintained in terms of the efficiency of the companyâ??s machinery.
Adhere to the companyâ??s Health and Safety policies and procedures as well as relevant Health and Safety legislation.
Maintain general housekeeping.
Any other tasks and duties as assigned.
To apply, please send your CV with your salary expectations to liza-nelle@personastaff.co.za
 Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful. Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004611/LN&source=gumtree
3d
1
SavedSave
*Reference: CT003808-DA-1*
This is preferably an employment equity role for our client in the mining equipment industry. They are currently seeking a Field Service Technician for the Rustenburg area.
* *
*Requirements:*
* Qualified Auto Electrician/Electrician/Millwright/Diesel Mechanic/Fitter (Section 26B/13).
* Technical background with 3 years’ experience as a Field Service Technician.
* Experience in underground mining Industry equipment.
* Previous experience installing, repairing, assembling and servicing underground mining equipment and components of electrical systems
*Visit our website to view all of our current vacancies: (www.mprtc.co.za)(http://www.mprtc.co.za/)*
* *
*By submitting any Personal Information to MPRTC in any form you acknowledge that such conduct constitutes a reasonable unconditional, specific and voluntary consent to the processing and storing of such Personal Information by MPRTC and/or MPRTC’s clients and/or verification information suppliers. You voluntarily consent that for the purposes of potentially gaining future employment opportunities, thorough background screening which may include but will not be limited to criminal, fraud, ITC and employment reference checks may be conducted. Should you have not been contacted within 14 days, please consider your application unsuccessful. You have the right to “Opt-Out” of electronic communications from us at any time and you also have the right to request us to delete your personal information by contacting us.*
R
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzUyMTY1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1239692&xid=1555_52165
2y
1
SavedSave
*Reference: JHB000553-J-1*
Our Client in the Automotive Industry recruit 10 x Instrumentation Technicians, this position require the service of an individual to do maintenance installations on hydraulic presses , Industrial Robots ,CNC Machines , Spot Welding guns as well as project Installations
*MUST PREPARED TO WORK SHIFTS -ROTATING 3 SHIFT SYSTEM *
*Knowledge Required*
* PLC Programming -Siemens S5.S7,Festo
* Robotics -Kuka ,ABB
* AC/DC -Drives and Servo Applications and drives experience
* SCADA-WinCC ,WinFlex /HMI -Siemens , EBELT ,BTxxx, Suetron -Programming
* SEW Motors
* Profi Bus
* TIA
* Profi Net
* Hanging Spot Guns Step 7
* Root Cause Analysis
Skills Requires
* Ability to read and understand Electrical Drawings
* Electrical & PLC Fault Finding
* Ability to read and understand Hydraulic/Pneumatic drawings
* Able to work on Phase 380V
Qualifications
* 2-3 years exp in Automotive and instrumentation
* OR Qualified Millwright or Electrician with applicable experience
* T3/S4 Diploma will be an advantage
* 2-3 years as a Technician in the Electrical field ,especially in automotive -hydraulic,maintenance /robotics /projects
R 37000 - 38000 - Monthly
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzQ5MDI2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1235727&xid=1555_49026
2y
1
SavedSave
Astral a leading Southern African integrated poultry producer
*The ideal candidate would be responsible for:*
· Mechanical maintenance and project work within the Farms Division· Attend to breakdowns
*The successful candidate must meet the following requirements:*
· Minimum N3 qualification· Be in possession of a trade certificate as a Millwright · Have at least 3 to 5 years experience as an Artisan· An ability to cope under pressure· Experience in a Poultry Plant will be an added advantage · Must be able to work overtime, weekends and public holidays when required· Must be prepared to work standby· Must be in possession of valid drivers licence
*The successful candidate must meet the following requirements:*
· Minimum N3 qualification· Be in possession of a trade certificate as a Millwright · Have at least 3 to 5 years experience as an Artisan· An ability to cope under pressure· Experience in a Poultry Plant will be an added advantage · Must be able to work overtime, weekends and public holidays when required· Must be prepared to work standby· Must be in possession of valid drivers licence
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzQ0MzM5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1234007&xid=1555_44339
2y
1
SavedSave
West Rand - Our client is a multinational market leader in innovative packaging solutions. 21600 colleagues over 178 production facilities in 45 countries. Your role will help to shape the next generation of packaging solutions as you head up the newly created apprenticeship program for Sub-Saharan AfricaWe need someone who is a qualified Artisan (electrical / electronic / millwright), with at least 5 years in management of learning and training programs, specific to trades, from a packaging or similar environment. Experience with PLCs, electronics, instrumentation, hydraulics, electro-pneumatics. Strong effective communication and change management skills essential to lead your teamYour strong coaching abilities and passion to develop teams for the future will open the door to a rewarding career with this pioneer. Be part of a professional working environment with global exposure
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ5NTMwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1187103&xid=1266_49530
2y
1
SavedSave
SJ04
*Key Performance Areas would include, but are not limited to:*
* Repairs and maintenance to machinery and equipment in line with prescribed regulations and standards;
* Regular inspections, fault finding and preventative maintenance jobs;
* Innovation and business improvements in support of operational and segment goals;
* Implemented initiatives of business plans;
* Turning, milling, welding and fitting for fabrication of components;
* Participate in the mini-business activities (E²);
* Adhering to relevant health, risk & safety regulations and quality standards.
*The successful candidate must preferably have the following experience/skills:*
* N3 equivalent Mechanical qualification (NQF 4), Mechanical Trade (Fitter/ Turner/ Millwright)
* 2 years experience in a Manufacturing environment
* N4 – N6 Technical qualification will be advantageous
* Experience in an FMCG environment will be advantageous
* Working experience with high speed bottling machinery a distinct advantage
* Labelling experience advantageous
* Ability to work accurately and according to precise measurements and specifications
* Competent in turning, milling, argon and arc welding
* Competent in pneumatics and hydraulics
* Reflect good leadership behaviour - towards colleagues, superior and company values
* Able to do in depth problem solving and fault finding
* Able to cope with the inherent physical demands of the position
* Able to work shifts, on weekends and flexible hours
* Have reliable transport to and from work
*Qualification required:*
* N3 equivalent Mechanical qualification (NQF 4), Mechanical Trade (Fitter/ Turner/ Millwright)
Market Related
*The successful candidate must preferably have the following experience/skills:*
* N3 equivalent Mechanical qualification (NQF 4), Mechanical Trade (Fitter/ Turner/ Millwright)
* 2 years experience in a Manufacturing environment
* N4 – N6 Technical qualification will be advantageous
* Experience in an FMCG environment will be advantageous
* Working experience with high speed bottling machinery a distinct advantage
* Labelling experience advantageous
* Ability to work accurately and according to precise measurements and specifications
* Competent in turning, milling, argon and arc welding
* Competent in pneumatics and hydraulics
* Reflect good leadership behaviour - towards colleagues, superior and company values
* Able to do in depth problem solving and fault finding
* Able to cope with the inherent physical demands of the position
* Able to work shifts, on weekends and flexible hours
* Have reliable transport to and from work
*Qualification required:*
* N3 equivalent Mechanical qualification (NQF 4), Mechanical Trade (Fitter/ Turner/ Millwright)
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI0NzI2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1185916&xid=1555_24726
2y
1
SavedSave
*Reference: JHB002191-RD-1*
Our client is looking for a Millwright who will contribute towards the business success by ensuring that machinery and equipment are installed and maintain according to the required standard.
*Area*: Harrismith
* *
*Main Duties*
* Repair, install and manufacture equipment according to standard.
* Maintain plant mechanical equipment to reduce downtime and increase plant availability.
* Conduct regular inspection to identify and report all defective equipment.
* Attend planned and abnormal standby duties and respond to breakdowns.
* Prepare cables and electrical cables for maintenance or connection.
* Maintain and repair electrical equipment according to the required standard.
* Maintain and repair plant instrumentation and control system.
* Perform general housekeeping according to the required standard.
* Complete job cards and determine job requirements on the job cards.
* **Work Experience*
* Must have Grade 12 /N3 with mathematics and science.
* Have relevant trade test
* Have a valid driver’s license with own transport.
* Have 3 years’ experience (preferably in a Paper Mill environment)
*Core Competencies*
* Pay attention to detail.
* Be able to perform jobs on his/her own and as a team.
* Results orientated Work Conditions
* Overtime as required.
* Work rotational shifts.
R MR - MR - Monthly
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzMxMjMzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1206244&xid=1555_31233
2y
1
SavedSave
*Reference: NES013496-MVDB-1*
Experienced Workshop Manager wanted!
*Job & Company Description:*
This position will be based in Secunda. This well-known organisation specialises in the supply of valves to large industries like mining, FMCG, pulp and paper industry. With of experience in the industry has made them one of Southern Africa’s top suppliers. They pride themselves on being technical specialists who fully understand TCO principles. They have an opportunity available for an experienced Workshop Manager. The successful candidate will have experience within the Valves Industry.
*Education:*
* Qualified Artisan Fitter And Turner or Millwright.
*Job Experience & Skills Required:*
* Minimum of 10 years management experience.
* You will be responsible for job allocation.
* Manage a team of artisans and assistance to deliver an excellent service.
* Travel from time to time to customers with Sales Representatives.
*Apply now! *
For more engineering jobs, please visit (www.networkrecruitment.co.za)(http://www.networkrecruitment.co.za)
If you have not had any response in two weeks, please consider the vacancy application unsuccessful. Your profile will be kept on our database for any other suitable roles / positions.
For more information contact:
Marzaan van der Bank
Specialist Mechanical and Production Consultant
087 379 8831
R 530 000 - 540 000 Annually
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI0MjY5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1184755&xid=1555_24269
2y
1
SavedSave
Well established company cased in the South of Gauteng requires a Trade Tested Millwright with;
* Trade Tested Millwright
* PLC experience
* Required to be more electrical
* Manage and oversee staff.
* Have strong leadership abilities
* Stable track record and required to work shifts
* Trade Tested Millwright
* PLC experience
Rneg (depending on experience)
* Trade Tested Millwright
* PLC experience
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI2OTA5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1192628&xid=1555_26909
2y
1
SavedSave
*Reference: NES013586-MVDB-1*
Seeking an experienced Plant Foreman with experience in the Packaging industry.
*Job & Company Description:*
This opportunity is available with a very popular manufacturing company. They have clients across sub-Sahara Africa. With over 100 years of experience they have become a leading brand in the construction industry. The ideal candidate will come from a packaging environment. You will have led a team of over 22 people.
*Education:*
* Millwright Trade Certificate / Electrical Qualification
*Job Experience & Skills Required:*
* 5 years’ experience as a foreman.
* Supervise and lead a team of 22 operators.
* Manage plant operations including plant maintenance, eliminate non-conformance, production overview and report writing.
* Liaise with internal and external stakeholders.
*Apply now! *
For more engineering jobs, please visit (www.networkrecruitment.co.za)(http://www.networkrecruitment.co.za)
If you have not had any response in two weeks, please consider the vacancy application unsuccessful. Your profile will be kept on our database for any other suitable roles / positions.
For more information contact:
Marzaan van der Bank
Specialist Mechanical and Production Consultant
087 379 8831
R (360 000)(tel:0360000) - 480 000 Annually
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI4NjY4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1198060&xid=1555_28668
2y
Save this search and get notified
when new items are posted!
