Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Results for code 10 drivers jobs in Engineering & Architecture jobs in Gauteng
1
A national logistics provider (specialising in A-grade warehousing and transport logistics) is looking for an experienced Senior Diesel Mechanic & Fleet controller, a physically fit candidate with excellent attention to lead the maintenance and repair of linehaul and smaller, local vehicles. The primary duties include all servicing and maintenance, performing physical, visual and diagnostic tests to find faults, analysing results and repairing or replacing all vehicles parts including engine, steering, transmission, braking or lighting system components.
The ideal candidate needs to be highly organized and communicate effectively, as they will be expected to maintain detailed records of serviced vehicles and interact with Ops for co-ordination of resources. This position is based in the head office in Pomona, Kempton Park, Gauteng.
* Follow a checklist of inspection procedure
* Running and analysing various tests on vehicles
* Do routine maintenance, such as changing oil, checking batteries, and lubricating equipment and parts
* To carry out routine servicing
* Attending to Breakdowns
* Adjust and align wheels, tighten bolts and screws, and attach system components
* To be able to diagnose and repair faults in Diesel engines and Hydraulic systems.
* Replacing vehicle engines, steering mechanisms, transmissions and braking systems.
* Checking vehicle lighting systems.
* Test driving vehicles to gauge performance.
* Performing preventative maintenance on service trucks.
* Maintaining detailed records of serviced vehicles.
* Adhering to an inspection procedure checklist.
* Maintaining a parts inventory.
* Ensuring the cleanliness of the shop.
* Report into and plan with Management for the co-ordination of resources
* Maintain tools and environment
* Travel to branches as necessary
* Ensure all vehicles on the road meet all necessary Road Traffic Regulations
* Degree or Diploma in Mechanical or Automotive Engineering
* ASE Diesel Certification
* Fitter / Diesel Mechanic Trade Test Certificate
* Experience in 3PL environment
* Knowledge of Road Traffic Act
* Able to work afterhours and weekends as required
* Demonstrate initiative and creative problem-solving skills
* Good fault finding, electronic diagnostic skills
* Valid drivers license- code 10 and 14
* Aptitude for mathematics and science.
* Advanced knowledge of diesel engine components.
* Good IT and diagnostic skills.
* Physically fit and able to lift to 150 pounds.
* Proficiency with maintenance and repair tools
* Microsoft Word and Excel skills
* Attention to detail.
* Good interpersonal skills.
* Excellent verbal communication skills.
* Good organization skills
* Good problem-solving skills
* Own transport is essential
* Reliable
* Hardworking and trustworthy
R240 000 - R360 000 p/a based on candidates’ experience
* Degree or Diploma in Mechanical or Automotive Engineering
* ASE Diesel
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzIzNzczX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1184477&xid=1555_23773
2y
1
The services of a Senior Data Engineer are needed for one of our prestigious clients. Suitable candidates are invited to apply.
Applies advanced knowledge of area
• Managing projects / processes
• Ability to develop within a specific sought-after programming language
• Strong working knowledge with software development tools, techniques and approaches used to build application solutions
• Working knowledge with software development tools, techniques and approaches used to build application solutions
• Cloud computing technologies, Business drivers and emerging computing trends
At least 10-12 years Cloud architecture and reporting technology experience
• Extensive experience in implementing and monitoring solutions
• Experience in testing (manual or automated testing)
• Web and digital project experience advantageous • Agile working experience advantageous
Relevant IT / Business Degree
*Functional Skills:*
Understanding of integration between different technologies
• Coordination between development and support environments
• Assisting with the business case
• Planning and monitoring
• Eliciting requirements
• Requirements organisation
• Translating and simplifying requirements
• Requirements management and communication
• Requirements analysis
• Document requirements in appropriate format depending on methodology followed
• Assist with identification and management of risks
Expertise in ETL optimization, designing, coding, and tuning big data processes using Apache Spark.
• Experience with building data pipelines and applications to stream and process datasets at low latencies.
• Show efficiency in handling data - tracking data lineage, ensuring data quality, and improving discoverability of data.
• Sound knowledge of distributed systems and data architecture (lambda)- design and implement batch and stream data processing pipelines, knows how to optimize the distribution, partitioning of high-level data structures.
• Experience designing and supporting large-scale distributed systems in a production environment AWS Solid understanding of Components - VPC | IAM.
Above average experience/understanding of AWS Components:
• Lambda
• DynamoDB
• Param Store
• Secrets Manager
• Athena
• Glue
• CloudWatch
• Step Function
• SNS
• Code Build/Pipeline
• CloudFormation
• S3 Strong experience/understanding of:
• Python 3x
• SQL
• Py Spark
• Boto3
• Terraform
• ETL
• Docker
• Linux / Unix
• Big Data
• Oracle/PostgreSQL
• Powershell / Bash
• Experience working in Agile SDLC methodology.
At least 10-12 years Cloud architecture and reporting technology experience
• Extensive experience in implementing and monitoring solutions
• Experience in testing (manual or automated testing)
• Web and digital project experience advantageous • Agile working experience advantageous
Relevant IT / Business Degree
*Functional Skills:*
Understanding of integration be
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzY3MDM2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1260192&xid=1555_67036
2y
Ads in other locations
1
* We will ONLY consider CV’s that have been emailed to; therecruitmentguy @ outlook .com
* (Use Ref #1559)
*NEW EMPLOYMENT AVAILABLE*
*Title: Forklift Lifting Machine Inspector (LMI Technician)*
*Area: Pietermaritzburg*
*Industry: Industrial*
*Ref No.:* TRG 1559
*Salary:* Market related (Qualification & Experience negotiable)
*Start Date:* Yesterday / ASAP
A *Forklift - Lifting Machine Inspector (LMI Technician)* is required for permanent employment based in *Pietermaritzburg, *to load test and certification of material handling equipment *(Forklifts)* on and off site, in a timely and cost-effective manner, so that customer and company requirements are met. Maintaining of vehicle records.
*(ALL) Required Certificates, Licences, Registrations include:*
* *Trade test certificate, mechanic*
* *LMI certificate*
* *Code 10 drivers licence *
* *Valid forklift operator licence*
*Key Performance Areas: (Essential Duties & Responsibilities):*
To perform this job successfully, the appointed individual must be able to perform each essential duty / key performance area satisfactorily.
* Perform accurate diagnostics / troubleshooting in event of breakdown of equipment; communicate what repairs are needed by advising customer and Field Service Team Leader.
* Maintains vehicle maintenance and operational data / history by updating and timeously communicating information that must go on record.
* Provide complete customer satisfaction in a polite and professional manner.
* Ensure proper communication between self, workshop staff (Field Service Team Leader and controller).
* Ensure OHSACT requirements are met in all actions on company premises; maintains a safe work environment by verifying vehicle safety device operations, following standards and procedures and in general complying with legal regulation.
* Updates job knowledge by participating in educational opportunities
*Required Minimum Knowledge, Skills Education / Training and Experience Requirement(s):*
The requirements listed below are representative of the knowledge, skills, education / training and experience required for this position:
* *Matric, Grade 12 or equivalent qualification*
* *Qualified Diesel and/or Petrol Mechanic, plus experience of maximum of 5 years with forklifts or similar material handling equipment; or Qualified Forklift Mechanic.*
* *Must be a registered Lifting machinery inspector with ECSA (Forklift)*
* *Minimum of 5 years mechanical, hydraulic and electrical experience pertaining to forklifts*
* *General working knowledge of auto electrical systems (ignition, starting, charging, illumination)*
* Excellent work ethic (honest, reliable, hardworking, dedicated and takes pride in work carried out)
* Prioritising and multi-tasking skills; strong sense of urgency; problem solving and decision-making skills
* Dedication to service excellence in every aspect of work carried out; stron
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzE0NTc4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1158903&xid=1555_14578
2y
1
SavedSave
Our client in wastewater systems are looking for a Engineering designer.Designers take a central role in the delivery of projects. Designers are directly responsible for the Quality, Creativity and Delivery of the projects they are overseeing. It is a role that requires attention to detail and a deep understanding of the products and services offered by the Company and its competitors. A Designer is expected to act with the highest moral and ethical standards, in a trustworthy manner whilst also protecting the intellectual property, goodwill and confidentiality of the company’s information and methodologies. Successful execution of the role of a Designer is subject to the roles and responsibilities assigned to this individual, is based on the achievement of performance KPIs, and the diligent and timeous execution of the roles and responsibilities assigned to the Design Lead. Each function assigned to the Designer carries an important contribution to the success of the business and the goal of being market leading in every way and achieving the highest standards of quality and service.The key areas of focus and a detailed understanding of the role include, but is not limited to CAD Design, Manufacturing and Business Development.Duties:1. Preparation of design related material for Proposals and Costings;2. Engineering Interaction;3. Design planning based on project/system requirements;4. Creating, implementing and maintaining the Design and Development ISO document system;5. Ensuring designs are executed according to information issued and quality standards;6. Provides detailed engineering information by answering questions and requests;7. Provides cost effective innovative solutions;8. Completes projects in an efficient and timely manner;9. Contributes to team effort by accomplishing related results as needed;10. Ensuring the dedicated design server & software subscriptions are maintained accordingly;11. Creating accurate detailed designs for manufacturing by the Company and/or contractor;MINIMUM REQUIREMENTSQUALIFICATIONS :National Senior Certificate (NSC),Mechanical Engineering Qualification or equivalentEXPERIENCE :3-5 Years’ Experience in the Water Treatment Products and Services offered by the Company;Understanding of Water Treatment Products and Services offered by the Company;Understanding of Water Treatment Products and Services and ancillary technologies, products and methodologies;Computer literate and intermediate with Microsoft Suite and Computer Aided Design (CAD) Software;Appropriate training and certifications with respect to Computer Aided Design (CAD) software;Appropriate understanding of the manufacturing processes required by the Company;REQUIREMENTS & SKILLS :Code B Drivers’ License, CAD Software, Concept Development, Problem Solving, Project Management, Focus, Planning, Creativity , Attention to Detail, Innovation, Time Management, Working under pressure and Leadership.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzM1ODc4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1121648&xid=1266_35878
2y
1
SavedSave
Our client in wastewater systems are looking for a Engineering designer.Designers take a central role in the delivery of projects. Designers are directly responsible for the Quality, Creativity and Delivery of the projects they are overseeing. It is a role that requires attention to detail and a deep understanding of the products and services offered by the Company and its competitors. A Designer is expected to act with the highest moral and ethical standards, in a trustworthy manner whilst also protecting the intellectual property, goodwill and confidentiality of the company’s information and methodologies. Successful execution of the role of a Designer is subject to the roles and responsibilities assigned to this individual, is based on the achievement of performance KPIs, and the diligent and timeous execution of the roles and responsibilities assigned to the Design Lead. Each function assigned to the Designer carries an important contribution to the success of the business and the goal of being market leading in every way and achieving the highest standards of quality and service.The key areas of focus and a detailed understanding of the role include, but is not limited to CAD Design, Manufacturing and Business Development.Duties:1. Preparation of design related material for Proposals and Costings;2. Engineering Interaction;3. Design planning based on project/system requirements;4. Creating, implementing and maintaining the Design and Development ISO document system;5. Ensuring designs are executed according to information issued and quality standards;6. Provides detailed engineering information by answering questions and requests;7. Provides cost effective innovative solutions;8. Completes projects in an efficient and timely manner;9. Contributes to team effort by accomplishing related results as needed;10. Ensuring the dedicated design server & software subscriptions are maintained accordingly;11. Creating accurate detailed designs for manufacturing by the Company and/or contractor;MINIMUM REQUIREMENTSQUALIFICATIONS :National Senior Certificate (NSC),Mechanical Engineering Qualification or equivalentEXPERIENCE :3-5 Years’ Experience in the Water Treatment Products and Services offered by the Company;Understanding of Water Treatment Products and Services offered by the Company;Understanding of Water Treatment Products and Services and ancillary technologies, products and methodologies;Computer literate and intermediate with Microsoft Suite and Computer Aided Design (CAD) Software;Appropriate training and certifications with respect to Computer Aided Design (CAD) software;Appropriate understanding of the manufacturing processes required by the Company;REQUIREMENTS & SKILLS :Code B Drivers’ License, CAD Software, Concept Development, Problem Solving, Project Management, Focus, Planning, Creativity , Attention to Detail, Innovation, Time Management, Working under pressure and Leadership.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzM1ODc4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1121648&xid=1266_35878
2y
Save this search and get notified
when new items are posted!