Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for any job in in Engineering & Architecture jobs in South Africa
1
Fitter & Turner (R&D Testing Artisan)
An internationally established Manufacturing company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible for attending all breakdowns on machines.
Monitor, report, and amend all stock and nonstock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to the progress of repairs and diagnosis of faults.
Report on the duration of downtime on the maintenance job card.
Responsible for tracking and upkeep of all service history information.
Preventative Maintenance
:Responsible for all Chain CU Jigs, R&D Testing & Zinc Plating.
Responsible for utilizing breakdown service & inspection data to motivate improvements on all above-mentioned production lines.
Responsible for reporting & investigating unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all responsible production lines.
Responsible for continuous improvement on maintenance procedures and checklists.
Responsible for interacting with the maintenance department relating to any changes, and improvements following investigations on breakdowns, improvements on downtime etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to the Design department relating to improvements & issues on all relevant production lines.
Responsible for ensuring all necessary tools & equipment are available and in working condition.
Responsible for reporting any deviations to original as-built drawings/designs on all responsible machinery and components.
Liaise with the Projects Engineer on the commissioning of all new responsible machinery and components.
Responsible for innovation and improvement of all responsible machinery and components
Responsible for interacting with R&D, Design, and contractors on testing phases of all responsible machinery and components.
Please forward your CV to liza-nelle@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. I
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004790/LN&source=gumtree
2d
1
SavedSave
Senior Fitter & Turner (Maintenance)
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner in their Maintenace division.
Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible to attend all breakdowns on all machines.
Monitor, report, and amend all stock and non / stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of all Induction ovens & temper furnaces service history information.
Liaise with Induction Coil Specialist and Induction Generator Specialist on any breakdowns regarding all Induction ovens & temper furnaces and commissioning thereof.
Preventative Maintenance
:Responsible for all Induction ovens & temper furnaces standardization per production unit.
Responsible to utilize breakdown service & inspection data to motivate improvements on all Induction ovens & temper furnaces lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all Induction ovens & temper furnaces
Responsible for continuous improvement on maintenance procedures and checklists
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all Induction ovens & temper furnaces.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all Induction ovens & temper furnaces.
Liaise with Projects Engineer on commissioning of all new Induction ovens & temper furnaces.
Responsible for innovation and improvement of all Induction ovens & temper furnaces
Responsible to interact with R&D, Design, and contractors on testing phases of all Induction ovens & temper furnaces machines.
Please forward your CV to natasha@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protec
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004784/N&source=gumtree
2d
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post-trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Ensure that all parts comply with the procurement register and data pack (Report any deviations). Check that all tools and equipment are available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to liza-nelle@personastaff.co.za
and indicate your s
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004789/LN&source=gumtree
2d
1
Fitter & Turner (R&D Testing Artisan)
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible to attend all breakdowns on machines.
Monitor, report, and amend all stock and non / stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of all service history information.
Preventative Maintenance
:Responsible for all Chain CU Jigs, R&D Testing & Zinc Plating.
Responsible to utilize breakdown service & inspection data to motivate improvements on all above-mentioned production lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all responsible production lines.
Responsible for continuous improvement on maintenance procedures and checklists.
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all relevant production lines.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all responsible machinery and components.
Liaise with Projects Engineer on commissioning of all new responsible machinery and components.
Responsible for innovation and improvement of all responsible machinery and components
Responsible to interact with R&D, Design, and contractors on testing phases of all responsible machinery and components.
Please forward your CV to natasha@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Person
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004787/N&source=gumtree
2d
1
SavedSave
Senior Fitter & Turner (Maintenance)
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner in their Maintenace division.
Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible to attend all breakdowns on all machines.
Monitor, report, and amend all stock and non / stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of all Induction ovens & temper furnaces service history information.
Liaise with Induction Coil Specialist and Induction Generator Specialist on any breakdowns regarding all Induction ovens & temper furnaces and commissioning thereof.
Preventative Maintenance
:Responsible for all Induction ovens & temper furnaces standardization per production unit.
Responsible to utilize breakdown service & inspection data to motivate improvements on all Induction ovens & temper furnaces lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all Induction ovens & temper furnaces
Responsible for continuous improvement on maintenance procedures and checklists
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all Induction ovens & temper furnaces.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all Induction ovens & temper furnaces.
Liaise with Projects Engineer on commissioning of all new Induction ovens & temper furnaces.
Responsible for innovation and improvement of all Induction ovens & temper furnaces
Responsible to interact with R&D, Design, and contractors on testing phases of all Induction ovens & temper furnaces machines.
Please forward your CV to megan@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected accor
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004781/MM&source=gumtree
2d
1
Our client, an agricultural steel processing company, is seeking an experienced International Marketing Specialist to drive the launch and promotion of their new product lines in global markets.
In this role, you will be responsible for developing and executing comprehensive marketing strategies to effectively introduce their innovative products to international customers.
Qualifications & Requirements:
Bachelor’s degree in marketing, International Business, or a related field.
10+ years of experience in international marketing (agricultural or manufacturing industry beneficial).
Proven track record of successfully launching new products in global markets.
Exceptional written and verbal communication skills, including the ability to present complex information in a clear and compelling manner.
Proficiency in digital marketing tools and analytics to measure and optimize campaign performance.
Strong cross-cultural awareness and the ability to adapt marketing strategies to local market needs.
Fluency in English and at least one other language relevant to target markets.
Willingness to travel internationally to support marketing initiatives.
Understanding of the agricultural and steel processing industry landscape.
Responsibilities:
Conduct thorough market research to identify potential target markets, customer needs, and competitive landscape for new product lines.
Develop and implement international marketing plans, including go-to-market strategies, pricing, distribution, and promotional activities.
Create localized and culturally relevant marketing content (e.g., website, product collateral, social media) for diverse global audiences.
Manage and optimize digital marketing campaigns across various online channels to generate brand awareness and leads in international markets.
Coordinate with the sales team to align marketing efforts and support lead generation, lead nurturing, and customer engagement activities.
Analyse market data, monitor competitor activity, and track key performance indicators to continuously improve marketing strategies.
Serve as the subject matter expert on new product capabilities, features, and benefits to effectively communicate value proposition to international customers.
Attend and represent the company at relevant industry events, trade shows, and conferences in target markets.
Collaborate cross-functionally
with product development, operations, and customer service teams to ensure seamless new product launches.
Please forward your CV to megan@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona
SECTOR: Engineering & Technical; Marketing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004782/MM&source=gumtree
2d
1
Fitter & Turner (R&D Testing Artisan)
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Responsibilities
Breakdowns:
Responsible to attend all breakdowns on machines.
Monitor, report, and amend all stock and non / stock item levels in the Stores & Maintenance department pertaining to critical spare parts.
Report to Maintenance & Production with relation to progress of repairs and diagnosis of faults.
Report on duration of downtime on maintenance job card.
Responsible for tracking and upkeep of all service history information.
Preventative Maintenance
:Responsible for all Chain CU Jigs, R&D Testing & Zinc Plating.
Responsible to utilize breakdown service & inspection data to motivate improvements on all above-mentioned production lines.
Responsible to report & investigate on unforeseen limitations/stoppages during planned services.
Responsible for weekly/monthly & yearly services on all responsible production lines.
Responsible for continuous improvement on maintenance procedures and checklists.
Responsible to interact with maintenance department relating to any changes, improvements following investigations on breakdowns, improvements on down-time etc.
Monitor and report on machine components.
Projects:
Responsible for frequent feedback to Design department relating to improvements & issues on all relevant production lines.
Responsible to ensure all necessary tools & equipment are available and in working condition.
Responsible to report any deviations to original as-built drawings / designs on all responsible machinery and components.
Liaise with Projects Engineer on commissioning of all new responsible machinery and components.
Responsible for innovation and improvement of all responsible machinery and components
Responsible to interact with R&D, Design, and contractors on testing phases of all responsible machinery and components.
Please forward your CV to megan@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Inform
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004763/MM&source=gumtree
2d
1
SavedSave
Our client in the agricultural sector is seeking an Automation Technician to join their team. This role will report directly to the Technical Manager.
Requirements:
Matric certificate.
3+ years in a similar role.
Must have good communication skills in English and Afrikaans.
National diploma or degree in electronics/mechatronics.
Drivers license.
ELV electrical systems and VSD/PLC.
An understanding of hydraulics
AutoCAD knowledge.
Problem-solving and organizational skills.
Duties & Responsibilities:
Development of AutoCAD drawings and design.
Assist with technical projects and Beta Sites as and when needed.
Assist with assembly.
Automation of irrigation dosing units.
Assist with controllers in cabinets with protection devices.
Assist with assembly of radio units.
Testing software and hardware.
Wiring of cabinets and panels
Troubleshooting of controller hardware and software.
Assist with telephonic support to dealers and end users.
On-Site support to dealers and end users – South Africa and SADC Countries.
Training on DF products, training dealers and end users on the correct usage of the automation equipment.
Assist with the servicing of filter banks and back flush controllers.
To apply, please send your CV to liza-nelle@personastaff.co.zaPlease note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. By applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request our POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004756/LN&source=gumtree
2d
1
SavedSave
JOB PURPOSE
Responsible for the laboratory day to day functioning and operations.To meet the needs and expectations of Management and customers by producing high quality and efficient work, in line with the Quality Assurance Policies.Improves the commercial viability of the laboratory and manage and maintain a cost-effective operation.Direct all project related activities to ensure time schedules achieved and quality standards implemented.Train and obtain competence of all the testing activities in the laboratory to the ISO 17025 National Accreditation System.Maintain the Company QMS requirements & procedures.
RESPONSIBILITIES
Maintenance and implementation of ISO 17025 (South African national Standard) Quality Management System as committed to by the LaboratoryManaging Branch PersonnelClient LiaisonHighly focused, attention to detailAble to work under pressure & maintain composurePrepared to work overtime, if so requiredHonest and trustworthyResults orientatedResponsible and resourcefulService driven & client committedAssertive
KEY PERFORMANCE AREAS
Branch Commercial performanceClient footprint growthEmployee managementRelevant technical competencies
PREREQUISITES
Educational level or equivalent:
Diploma / Degree (Civils/Materials) or related experience
Professional experience:
Ten years’ experience in Civil Engineering Laboratory practices & working knowledge of ISO 17025 Quality Management SystemsThorough knowledge of Civil Engineering Materials Testing ActivitiesFive years management experienceComputer/MS office literateDeadline drivenAble to lead and motivate Employees to high standards of excellence
Specific training or accreditations:
Sound knowledge theoretical & practical of related test methods as used in Laboratory SANS 3001 series TMH/COLTO etcExisting technical signatory – SANS 3000 series test methods – would be preferredProficient at Mathematics and ScienceComputer literacy (Excel intermediate)Ability to train and impart knowledgeGood knowledge of Health and Safety Procedures and
NON-NEGOTIABLE REQUIREMENTS
Must have at least 5 years laboratory experienceTechnical signatory on test methods
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zNDQ3MTQxOTY2P3NvdXJjZT1ndW10cmVl&jid=1621423&xid=3447141966
2d
1
The requirements needed for the storeman position.
MatricMust have at least 5 years of experience experience in goods receiving and issuing of material to the shop floorMust have a Forklift LicenseMust be computer literate preferably familiar with the SAP system.Administer all paperwork and delivery notes as per the defined procedure
Execute the receiving and dispatching of stock
Raise delivery notes against the relevant accountsPrepare stock requirements timeouslyMaintain effective stock control at all timesAdminister all paperwork and delivery notes as per defined proceduresEnsure Minimum and Maximum stock thresholds are maintained at all timesInitiate, participate and oversee stock take
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80MTU3MzQxMTM2P3NvdXJjZT1ndW10cmVl&jid=1358961&xid=4157341136
2d
1
SavedSave
My Engineering client in Germiston is looking for a Qualified Millwright
Minimum Requirements:
Qualified Millwright with trade test papers5 years of experience with CNC machines preferable with Okuma, Doosan, Fanuc and Mazak controlsKnowledge of high voltage switching will be an advantageWilling to work late on breakdowns if needed, respond to callouts and work over weekends.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODAwOTQyMDYyP3NvdXJjZT1ndW10cmVl&jid=1260942&xid=3800942062
2d
1
SavedSave
My moulding client is looking for a CNC Technician with Millwright experience
Must have 5 years of working experience in CNC MachinesPreferably with Okuma, Doosan, Fanuc and Mazak ControlsMust be willing to work late on breakdowns if needed, respond to callouts and work over weekendsKnowledge of high voltage switching will be an advantage
NB Applicants - Please Note:
We use Ditto to track and manage applications and can only accept online applications. If you are unable to apply through the link provided, please upload your CV to our website www.cfsrecruitment.co.za under VACANCIES. If the vacancy doesnt appear on the website, the position is no longer available.
The advertised salary range is merely a guideline in terms of the level of candidates required and it remains the prerogative of our client to offer a candidate any market-related salary in line with qualifications, skills, and level of experience.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMDEyMDc0NjE1P3NvdXJjZT1ndW10cmVl&jid=1298965&xid=1012074615
2d
1
Main Purpose of Job
Manage customer support and service and assume overall responsilbity for the success of the branch, including budgets and revenue targets as assigned.
Responsibilities:
Management of all the DAF retail branch activities ( inventory, parts sales, workshop and customer satisfaction)Develop and maintain customer relationships.Report on non-compliances and implement remedial actions.Implementation of policies and procedures.Jointly develop and train branch staff for future growth.Ensure profitability with monthly targets are achieved.Compile monthly branch reports and forecasts.Ensure compliance to strategic plans.Financial targets are achievedAchievement of regional sales targetsImplementation of effective control measuresCompliance to minimum CSI targets set for divisions on sales, workshop and parts.Health, Safety, Environment and Quality targets are achieved and enforced.
Key Competencies/Skills
Good leadership to drive a team towards achieving set targets.Good interpersonal skillsMust be competent to lead a diverse team of technical and sales staff.Staff motivation.Team development.Innovation in organisation, business and opportunity developmentCustomer-focused service orientated individual with a solid trucking background.Must have knowledge of DAF systems.Communication – Ability to work with people at different levels within the organization.Problem solving – Ability to solve problems independently.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS85NjAwMTU1MTY/c291cmNlPWd1bXRyZWU=&jid=1319517&xid=960015516
2d
1
SavedSave
Main purpose of the job
Identify, establish, and grow all potential truck sales within the assigned region, with the main sales focus, but not limited to the Extra Heavy Truck market segment, requiring focused sales effort for the DAF Truck range of products.
Requirements (qualifications, experience & skills)
Grade 12 or equivalentBeneficial but not essential – Marketing and Sales management DiplomaBeneficial but not essential – Diploma in Transport ManagementMinimum of 3 years Sales experience with focus on fleets with Extra Heavy Commercial VehiclesExcellent Communication and negotiation skillsComputer literateSound Commercial and Financial awarenessNegotiation skills
Role responsibilities
Work directly with the Sales Manager and/or Sales Director to develop product strategy and growth plans for company’s Transport SolutionsResponsible for the achievement of agreed sales targets and business plans.Grow and develop the Truck sales business through the identified market segments, including but not limited to direct selling through identified channels.Assist in the selection and specification of Trucks to meet customer specifications. Work alongside the technical manager to ensure the proposals prepared with quotation and tender documents are in line with customer requirements.Continue to develop Trucks sales application knowledge to help foster long-term relationships with key decision makers in the Truck market.Track and report sales as well as financial performance for truck salesLiaise with the financial institutions to facilitate the requirements that are needed to apply for customer finance packages.Negotiate with Body builders, Hydraulic suppliers and trailer manufactures to ensure we obtain the correct specification and commercial proposal.Once the truck is sold ensure the correct paperwork is issued to the various departments to prepare the vehicles for customer delivery. On delivery to the customer ensure that the Hand-Over is done in accordance with DAF Trucks N.V standard.Keep abreast with DAF E-Campus online training system ensuring each module is completed within the agreed time frame
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMjg0NjU1MTEyP3NvdXJjZT1ndW10cmVl&jid=1406466&xid=3284655112
2d
1
SavedSave
Our clients in the Petroleum Oil and Gas sector is looking for a Fleet Controller to join their team based in Empangeni KZN.
Qualifications and Requirements:
Matric
Preferably newly acquired diploma in logistics
Ability to work under pressure to meet deadlines
Knowledge and Skills:
Advanced knowledge of all Microsoft Office applications (Word / Excel / PowerPoint), in particular
Excel
Must be computer literate
Excellent communication skills
Must be able to think on your feet
Goal-driven, no time wasters
Team-player
Able to work and thrive under pressure
To go the extra mile, whether expected of you or not.
Duties:
Preparing drivers paperwork with stops, load release etc.
Overseeing and managing all drivers and assistants
General fleet management
Briefing of drivers
Scanning in drivers paperwork to the de briefing hub every morning.
Vehicle monitoring and checking for suspicious stops
Tracker and trip sheet analysis
Maintain driver discipline .
Maintain truck turnaround time
Capture all drivers log sheets with overtime and night-outs
Keep record of all inhouse training and arrange for days for in-house training
Issuing of warnings
Preparing of cases for hearings
Assist with filling up trucks to get urgent orders out.
Assist with getting rid of preloads and checking in with customers if they are satisfied or if they need product
Processing of drivers leave and managing fleet to ensure there are enough drivers to trucks
Assist with planning and scheduling
Managing drivers’ hours worked
Liaising with gantries on renewing safeloads and driver inductions
Accident investigations
Communicate with customers late deliveries.
Daily speeding and tracking reports
Ensuring that drivers and customers calls are answered in a timeous manner-after hours included
Assist with HSSE – Safety manager to guide you.
Spot checks (HSE)
Near miss (HSE)
PPE Issue
Updating files (hard and soft copy)
Loading of trucks (safeloads, Hazchem’s, DGP and medicals. So, they can update on their side)
Maintaining of driver files
Maintaining of medicals Hazchem’s and DGP
Capturing all incidents and accidents on (QM) quality manager
Ensure toolbox talks are done on a weekly Basis
KPA on a monthly basis
Harbour permits(yearly) assist
Fire permits (yearly) assist
Liaising with the mechanics on trucks that need to be serviced and breakdowns and planning to get
defects sorted out
Alternating standby
Retrieve footage
Communication with Tracker and Truck assist
SECTOR: Petroleum, Oil and Gas
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93ZWJhcHAucGxhY2VtZW50cGFydG5lci5jb20vd2kvYXBwbGljYXRpb25fZm9ybS5waHA/aWQ9c3RhZmZzb2xzJnZhY2FuY3lfcmVmPVBFMDA1ODkxL0tC&jid=1805339&xid=PE005891/KB
2d
1
SavedSave
Tailings– Senior Engineer:
Gauteng (JHB)5 – 10 years relevant experienceProfessional registration advantageous
Our Client seeks to employ a self-motivated engineer to join our Tailings department and contribute to existing and new projects. The successful candidate will join a dynamic team in an intermediate level position within a well-established consulting firm
The requirements associated with the position are as follows:
BEng or BSc (Eng) required5-10 years of relevant experienceBEng in Civil Engineering or similarProfessional registration (PrEng) will be advantageousExperience in the design of tailings storage facilities, return water dams and associated infrastructureExperience in carrying out annual audit inspections on tailings storage facilities and return water damsExperience in surveillance of tailings and/or return water damsExperience in tender and contract documentationExperience in CPTu testing and interpretation preferredExperience in geotechnical investigations considered advantageousGood fundamental understanding and knowledge of geotechnicsExposure to associated civil engineering activities such as hydrology, structural design, dam breach assessments, water balancesCandidate should be proficient in MS Word, MS Excel, MS Outlook and MS PowerPointProficiency in MS Project considered advantageousCandidate should be proficient in slope stability, seepage analysis and FEM software, such as Geostudio.Candidate should be proficient in AutoCad Civil 3D or modelmakerProject management experience advantageous
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNzg1MzY3MDYzP3NvdXJjZT1ndW10cmVl&jid=1124461&xid=2785367063
2d
1
SavedSave
Mining Infrastructure Department – Civil Design Engineer
Mining infrastructure design (roads, earthworks, water management, etc.)5 – 7 years’ experienceGauteng (Centurion)
Our client seeks to employ a Civil Design Engineer in the Mining Infrastructure Department, based in the Centurion office. The Mining Infrastructure Department specialises in, amongst other, the design of roads, haul roads, bulk earthworks, terraces, stormwater management, dams, stream diversions, mine waste (tailings) disposal facilities and mining infrastructure areas.
The requirements associated with the position are as follows (mandatory):
BEng / BSc Eng or higher qualificationMinimum of 5 years’ relevant experienceAbove average academic results
Preference to candidates with the following skills and attributes:
Relevant experience in the design of mining related infrastructureExperience with Autodesk Civil 3DProfessional registrationGood critical thinking and problem-solving skillsGood communication skillsDynamic, self-motivated, takes responsibility and ownership of tasksWorks independentlyAttention to detail
The main duties associated with the position include the following:
Concept, preliminary and detailed designs of mining infrastructureTender documentation i.e., BoQ and works information
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80MTQyMzAyNjA4P3NvdXJjZT1ndW10cmVl&jid=1124462&xid=4142302608
2d
1
SavedSave
Permanent position based in Somerset West for an Energy Specialist.
Requirements:
An Electrical Engineering Degree (BEng) (NQF 8)Strong track record with at least 10 years of experience in the Energy Sector
Functional expertise in the following areas:
Renewable Energy strategiesMarket entry assessments related to the Energy SectorEngineering, Procurement and Commercial Management of Energy Projects, Products and ServicesRenewable Energy Strategic options analysis, and financial modelsCommercial offers and Business Case CompilationSouth African Citizen
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMjc4MjY4NTk5P3NvdXJjZT1ndW10cmVl&jid=908463&xid=1278268599
2d
1
SavedSave
Project Administrator:
Assist with project planning, and budgetingCertified Associate in Project Management (as a minimum)Gauteng (Centurion)
Project administrator to provide assistance to the project engineer with the project planning, budgeting. The position forms part of the Environmental Engineering Department
The requirements associated with the position are as follows:
Minimum required qualification in project management: Certified Associate in Project Management (CAPM)co-ordination with resources and progress reporting on various projects to clients of those particular projects.The position is for a permanent appointment based in our Centurion offices.The candidate should have an inclination for project management and be a good team player
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNzAxNTMyNTI0P3NvdXJjZT1ndW10cmVl&jid=1124463&xid=1701532524
2d
1
SavedSave
Permanent position based in Somerset West, Cape Town for an Office Manager in the Project Management Department.
Minimum Requirements:
South African CitizenProject Management Qualification (NQF 7 or Higher)8 years experience in Project Management 5 years of direct planning projects with a proven track recordPMP Certification
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMDIwNTQ4NTU3P3NvdXJjZT1ndW10cmVl&jid=456750&xid=3020548557
2d
Save this search and get notified
when new items are posted!