Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Suggested
Results for fitter jobs in Jobs in Western Cape
3
SavedSave
EXPERIENCED ALUMINIUM WINDOW AND DOOR FITTER WANTED FOR INTERMITTENT PROJECTS
4h
1
SavedSave
Fitter and Turner.
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Skills and Knowledge Required
Preventative Maintenance Routines.
Welding (Mig Tig & Arc), Milling, and Turning.
Planning - Check that all part complies with procurement register and data pack.(Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
Drilling and/or slotting holes: Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Pneumatics and Hydraulics.
Gearboxes.
Water Systems and Cooling Towers.
Basic Electrical Experience.
Bearing and Shaft Changing.
Fault Finding and Diagnosis.
Lubrication.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Consultant Name: Megan Ockhuis
4h
1
SavedSave
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Skills and Knowledge Required
Preventative Maintenance Routines.
Welding (Mig Tig & Arc), Milling, and Turning.
Planning - Check that all part complies with procurement register and data pack.(Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
Drilling and/or slotting holes: Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Pneumatics and Hydraulics.
Gearboxes.
Water Systems and Cooling Towers.
Basic Electrical Experience.
Bearing and Shaft Changing.
Fault Finding and Diagnosis.
Lubrication.
Please forward your CV to megan@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding y
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004763/MM&source=gumtree
17h
1
SavedSave
Fitter & Turner
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements:
• Grade 12 / National Senior Certificate.
• Section 13 Fitter and Turner Trade Test Certificate.
• 3 - 5 years post trade experience.
• Experience within a manufacturing environment (beneficial).
• Energetic, proactive and able to work under pressure.
• A valid driver’s license with own reliable transport.
Skills and Knowledge Required:
•Preventative Maintenance Routines.
•Welding (Mig Tig & Arc), Milling, and Turning.
•Planning - Check that all part complies with procurement register and data pack. (Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
•Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
•Drilling and/or slotting holes: Proper use of hand drill, Mag base drill, machining machine, etc.
•Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc. (Prep for next phase)
•Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack. (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
•Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
•Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
•Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
•Pneumatics and Hydraulics.
•Gearboxes.
•Water Systems and Cooling Towers.
•Basic Electrical Experience.
•Bearing and Shaft Changing.
•Fault Finding and Diagnosis.
•Lubrication.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
1d
1
Tool & Pump Technician or Millwright / Fitter & Turner – GeorgePump & Tool Technician or Millwright / Fitter & Turner – GeorgeRequirements:•Must have technical / mechanical knowledge of, and be able to service and repair:-Water pumps-Generators-Chainsaws and power tools -Lawnmowers etc•Must be able to do basic welding•Must have a valid driver’s license •Must be of sober habits•Must have contactable referencesResponsibility:Duties:•Servicing and repairing of:-Water pumps-Generators-Chainsaws and power tools -Lawnmowers etc•Sales of equipment and sparesWorking Hours:•08H00 – 17H00 (Monday – Friday)Salary:•R 10 000 – R 12 000 (Nett after deductions)To Start:•ASAPSend CV to info@synergyr.co.za (use the full job title, including the City/Town as a reference)Please send CV as a “Word” or “PDF” attachmentCV’s sent on Google Drive will not be openedIf you have not heard from us within 14 days, your application has been unsuccessfulSalary: R10 000 – R 12 000 (Nett after deductions)Consultant Name: Brandon Barnard
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQyMDgwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1151789&xid=1266_42080
2y
1
SavedSave
Aluminium Installer with minimum 5 years experience of installation of aluminium windows and doors, framed and frameless showers, balustrades and all related aluminium works required with valid drivers licence and good track record. Situated in St Helena Bay. Send cv to christobot@gmail.com.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzM4NDY2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1147405&xid=1266_38466
2y
SavedSave
Recycling factory looking for maintenance electrician for full time position.Requirements for this position is as follows.Key responsibilities include1. Electrical installations, maintenance and repairs2. Troubleshoot of plant breakdowns and repairs to keep production going3. Electrical inspections on all plant equipment4.Using electrical drawings5. Work according to safety standards6. Communication with mechanical fitters7. Electrical record keeping.8. After hours callouts and breakdown.Requirements1. Electrical trade tested2. Minimum 5 years practical done in electrical field3. Three phase and single-phase experience is a must4. Own transport5. Driver's license6. Factory working experience will be an advantage7. Team playerThis is a full-time position.If you are interested, please e-mail C.V to beaconvale@extrupet.comWhattsApp Francois on 0829338998
2d
1
SavedSave
SA STEELWORKS - FITTERS ASSISTANT
AIRPORT INDUSTRIA – CAPE TOWN
The SA Steelworks Fitters Department requires a committed, hardworking and motivated individual to join their team. The successful applicant will be responsible for, but not limited to General functions within the Fitters Department.
RESPONSIBILITIES WILL INCLUDE, BUT ARE NOT LIMITED TO:
Changing water and hydraulic pipingStrip machine parts for cleaningAssemble machine parts after cleaning themPerform routine inspectionsDo greasing on plant equipment as well as vehiclesFilling of grease gunsCleaning of the workshop areas (Housekeeping )Be able to measure equipment, read a tape measureAssisting the Manager / Supervisor with Ad hoc dutiesAdhere to health and safety regulations and instructions and advise the responsible person whenever there are risks identified
Under supervision:
Assist the fitter with bigger maintenance tasksAssist with Operating grinders ,drilling machines safelyAssist with changing drill bits and grinder disksFit bearings and grease before assemblyIdentify different tools /spanners
QUALIFYING REQUIREMENTS
Grade 12 certificateCertificate in Fitting and TurningPrevious experience in a similar environmentA general knowledge off hand tools and electrical toolsWillingness to work overtime as per operational requirements if and when required
QUALIFYING ATTRIBUTES
Ability to work in a team environmentAble to work independentlyAbility to work under challenging physical and climatic conditionsGood communication and interpersonal skillsAbility to function efficiently in pressurized work situationsIn good health and physically fitMust be of sober habits
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNjYwODIzMjUzP3NvdXJjZT1ndW10cmVl&jid=1608100&xid=2660823253
2d
1
SavedSave
MECHANICAL FITTER – SA STEELWORKS
AIRPORT INDUSTRIA – CAPE TOWN
SA Steelworks has a position for a qualified, committed, hardworking and motivated Mechanical Fitter in the Fitters Department at our SA Steelworks Division in Cape Town. The successful applicant will report to the Fitters Manager.
Responsibilities will include, but are not limited to:
Implementing Company maintenance procedures, including:
Conducting inspections on all plant machineryConducting routine planned and preventative maintenanceWorking through a computerised maintenance management systemAttending to breakdowns when requiredSetup and adjustment of machinery/equipmentGeneral housekeepingAdhering to Occupational Health and Safety Act
Fit and assemble metal parts, tools or sub-assemblies, including welding or brazing partsSet up and/or operate hand and machine tools and welding equipmentExamine detailed drawings or specifications to advice with regard to job, material and equipment requirementsCheck accuracy and quality of finished parts, tools or sub-assemblies.Provide coaching to semi-skilled staff
Machinery responsibilities will include, but are not limited to:
Industrial gearboxes, pinion boxes and flywheelsIndustrial shearsPinch rollersBearing housing assembliesBelt conveyors, drives, pulleys and rollersRoller table conveyersVibration tablesHydraulic and lubrication systemsAutomatic wire tying machinesElevatorsElectric, liquid and gas fuelled furnacesEvaporative coolersMobile and driven machinery
Abilities & technical competencies required:
Ability to work in challenging conditionsAble to work at heightsAble to work in a teamAble to work independentlyGood communication skillsSafety consciousWorking knowledge of OHSAExperience working in the steel industry will be advantageousWorking knowledge of C-Works, SAP, API Pro or similar CMMS
Applicants must have the following qualifying criteria:
Red Seal Trade Test qualification in FittingMinimum 5 years’ post trade test work experience in a manufacturing or production environmentKnowledge of typical power tools used in the tradeStrength to handle materials, tools and machinesGood hand-eye coordinationWillingness to work overtimePerform standby and call out dutiesIn good health, physically fitOwn reliable transport
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80MTg5NjI3ODc0P3NvdXJjZT1ndW10cmVl&jid=1690105&xid=4189627874
2d
1
SavedSave
MECHANICAL FITTER – SA STEELWORKS
AIRPORT INDUSTRIA – CAPE TOWN
SA Steelworks has a position for a qualified, committed, hardworking and motivated Mechanical Fitter in the Fitters Department at our SA Steelworks Division in Cape Town. The successful applicant will report to the Fitters Manager.
Responsibilities will include, but are not limited to:
Implementing Company maintenance procedures, including:
Conducting inspections on all plant machineryConducting routine planned and preventative maintenanceWorking through a computerised maintenance management systemAttending to breakdowns when requiredSetup and adjustment of machinery/equipmentGeneral housekeepingAdhering to Occupational Health and Safety Act
Fit and assemble metal parts, tools or sub-assemblies, including welding or brazing partsSet up and/or operate hand and machine tools and welding equipmentExamine detailed drawings or specifications to advice with regard to job, material and equipment requirementsCheck accuracy and quality of finished parts, tools or sub-assemblies.Provide coaching to semi-skilled staff
Machinery responsibilities will include, but are not limited to:
Industrial gearboxes, pinion boxes and flywheelsIndustrial shearsPinch rollersBearing housing assembliesBelt conveyors, drives, pulleys and rollersRoller table conveyersVibration tablesHydraulic and lubrication systemsAutomatic wire tying machinesElevatorsElectric, liquid and gas fuelled furnacesEvaporative coolersMobile and driven machinery
Abilities & technical competencies required:
Ability to work in challenging conditionsAble to work at heightsAble to work in a teamAble to work independentlyGood communication skillsSafety consciousWorking knowledge of OHSAExperience working in the steel industry will be advantageousWorking knowledge of C-Works, SAP, API Pro or similar CMMS
Applicants must have the following qualifying criteria:
Red Seal Trade Test qualification in FittingMinimum 5 years’ post trade test work experience in a manufacturing or production environmentKnowledge of typical power tools used in the tradeStrength to handle materials, tools and machinesGood hand-eye coordinationWillingness to work overtimePerform standby and call out dutiesIn good health, physically fitOwn reliable transport
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNTQ5NDQ1MjQwP3NvdXJjZT1ndW10cmVl&jid=1543475&xid=1549445240
2d
1
The Fitters department currently has a vacancy for a detail orientated, process-driven, dedicated individual to join their team. This position requires someone who is able to work in a fast paced, demanding and pressurized environment. The successful candidate must be able to lead a team effectively and must be skilled in time management, planning, decision making and problem-solving.
Responsibilities will include, but are not limited to:
Implement and manage the routine, planned and preventative maintenance programs for all machinery and equipmentManaging the mechanical inspections on all production machinery when requiredManaging compliance and adherence to the Company in-house maintenance program and proceduresManage and assist where possible with any breakdowns on all Production machineryAssist employees with fault finding and giving suitable input on diagnosticsManaging the servicing of any mechanical componentsInvestigate breakdowns and provide accurate feedback and forecastingEnsure that any critical parts that are to be kept at stores are updated regularlyLiaising with suitable suppliers and sourcing quality of parts and sparesEstimate costs and time required for repair or maintenance of the machineryEnsuring compliance of timekeeping, productive output, discipline and work programs within the Fitters department with assistance from Engineering management as requiredLead and manage the productivity and efficiency of all workshop activities with assistance from Engineering management as requiredEnsure that the machinery, equipment and tools are regularly checked as per the Safety File for the departmentEnsure compliance to Legal Requirements, Company and Health & Safety rules, policies and regulationsPlanning of department needs with the Engineering Manager and/or Directors as well as the effective execution of the said planningManage attendance and timekeeping by executing all administrative processes required i.e. time sheets of employees, leave, completing of daily attendance registersManage the distribution of overtime between the teamLiaise with HR in terms of any concerns, issues or disciplinary management of staffReview training requirements of the staff and report back to Engineering Manager and/or Directors the needsTake ownership and manage the CWorks processes for the Fitters department with assistance from Engineering management as requiredMonitor quality and efficiency of teams’ work programs and report any issues or possible improvements to Engineering Manager and/or DirectorsManage the manpower utilization and ensure it remains above 75% of work hours allocatedAbide by the regulations as set out in the Occupational Health and Safety ActAny other tasks, ...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNjAxNDg1MzU5P3NvdXJjZT1ndW10cmVl&jid=1754475&xid=1601485359
2d
1
SavedSave
The Engineering Department currently has a vacancy for an attentive to detail, self-motivated and dedicated individual to join their team in the Fitters department.
Responsibilities will include, but are not limited to:
Conducting mechanical inspections on all production machinery when requiredCompliance and adherence to the Company in-house maintenance program and proceduresResponsible for conducting routine planned and preventative maintenance
Hydraulic systems (leaks repairs, filter change outs)Conveyor belts, drives, pulleys and replacement of rollersLubrication tasksV-belts replacementsGeneral housekeeping
Attend breakdowns when required on all Production machineryFault finding on hydraulic systemsAssembly and pressure testing of hydraulic cylindersServicing of various hydraulic componentsProvide coaching to semi-skilled staffAdhering to the regulations as set out in the Occupational Health and Safety Act
Qualifying Criteria :
Qualified Fitter Artisan (Red Seal certification)Minimum Grade 12 or equivalentMinimum 5 years’ experience in a heavy industry or similar environmentMust be physical fit and able to work at heights and in confined spacesStrong Hydraulic background will be an advantage
Qualifying Attributes :
Must be able to work with minimum supervisionBasic computer proficiencyEnjoy practical and manual work & be able to work in a pressurized environmentAbility to work independently as well as in a teamSelf-motivated and results orientatedGood communication skillsMust have sober habitsAttention to detailWillingness to work overtime when requiredMust be a team playerSound understanding of an array of tools and technical equipment
Interested applicants are required to forward their CV. We regret that we cannot contact all applicants regarding their status. Should you not be contacted by us within 14 days from the date of your submission, please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMDA2OTgwMzIwP3NvdXJjZT1ndW10cmVl&jid=1728989&xid=1006980320
2d
1
SavedSave
The SA Metal Group currently has a vacancy for a committed, hands-on, attentive to detail, dedicated individual to join the Fitters team.
Responsibilities will include, but are not limited to:
Providing support to the department and Artisans with routine and preventative maintenanceProviding support and assistance with repairs on various equipment and machinesAssist in mechanical assemblyAssist with tools and lubrication of machineryDemonstrate basic mechanical knowledgeHousekeeping of the workshop and various work areasAbide by the regulations as set out in the Occupational Health and Safety ActOther adhoc duties as assign by the Department Supervisor, Team Leader or Engineering Manager
Qualifying Experience:
Grade 12 or equivalentMinimum of N3 or proven interest in obtaining trade test qualification in FittingMinimum of 3 years relevant working experience within the engineering or metal industryKnowledge and use of power toolsStrength to handle materials and tools (physically fit)Good hand-eye coordinationHands on practical approach to the jobSafety awareneness and consciousnessAbility to work under challenging conditionsMust be able to work in confined spaces and at heightsSound communication skills (understand, read and write English)Computer literateMust be prepared to work weekends and overtime when required
Qualifying Attributes:
Hard-working and self-motivatedTime management and organizational skillsDisplay a professional work approachAbility to work independently as well as part of a teamLogical and detail orientatedCommitment to a strong business ethic and integrityExcellent standards in execution
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xNTYxMzA5NTk5P3NvdXJjZT1ndW10cmVl&jid=1754474&xid=1561309599
2d
1
Job description:
The Fitters department requires a committed, hardworking and reliable General Technical Assistant to join their team. The General Technical Assistant will be responsible for the following tasks, amongst others:
Housekeeping on a daily basisGeneral workshop duties i.e. maintaining the cleanliness of the workshop and tool storeCleaning of toolsIdentify and able to select appropriate hand toolsAble to use basic power toolsAble to do to minor/ basic technical tasksDemonstrate appropriate knowledge of workshop safetyAssisting Artisans with various tasks as and when required
Qualifying Criteria:
Grade 12Basic knowledge of Health and Safety rulesAbility to handle tools i.e. cutting machinesPrevious experience in the same or similar role advantageousAdhere to Health and Safety rules and regulations
Qualifying Attributes
Hard-working and self-motivatedPrepared to work overtime and weekends when requiredPhysically fit (Strength to handle materials, tools and machines)Sober habitsAble to work in a team as well as independentlyHonest and reliableMust be willing and eager to learnAbility to multi-task and manage a demanding workload in a pressurised environmentMust be comfortable working in confined spaces and at heightsPhysically mobile and energeticAbility to follow rulesBe organised and keep their work area neat and tidy
Other Information:
Job type: Permanent position
Benefits include
· Provident fund
· Life cover at 4x annual salary
· Funeral cover
· 15 x paid leave days per annum
· Long service leave after five years of employment
Standard hours
07h30–17h00: Monday – Thursday
07h30–16h00: Friday
May be required to work overtime as per operational requirements
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMTc0Mzc1NjI2P3NvdXJjZT1ndW10cmVl&jid=1754473&xid=1174375626
2d
1
SavedSave
Tyre fitter with experience. Must be reliable.
2d
1
SavedSave
We are a reputable company seeking to employ an Aluminium fitter / Installer. please note you must have a valid drivers license in order to apply. Please DO NOT APPLY if you do not meet the requirements. Please email cv to: admin@tableviewglass.co.za If you do not hear from us it means you were unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQxMDM2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1147626&xid=1266_41036
2y
1
SavedSave
Requirements:Trade tested artisan (preferably a Fitter & Turner)Solid knowledge and experience on seamersPractical experience with lathe work (turning), welding and cutting.Knowledge of maintenance management systems e.g. Pragma or DMS NDC Personnel & Contractors adheres to the requirements of the POPI Act. If you have not heard from us within 14 days of applying, please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMTA5XzYxNTUzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1143151&xid=1109_61553
2y
1
SavedSave
CNC Milling OperatorCNC Milling Operator R18 000 + 13th Check George, WC Leading precision engineering company based in the Garden Route is currentlylooking for an experienced CNC Milling Operator to join their team. Industrieswill include mining and drilling, agriculture, transport and food production DutiesSetupMachine & ToolingHaveKnowledge of G-code (Fanuc Controls)Write basic CNCProgramsMust be ableto read and interpret technical drawings Requirements MatricCertification Own reliabletransport and valid drivers Fitter andTurner or Tool Maker Trade TestMinimum 3years’ experience after tradeMinimum 3years’ experience in a precision engineering environment Pleaseforward your CV to sheena@proteaplacements.co.za
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzUxNzAyX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1195444&xid=1266_51702
2y
Requirements for Boiler Maker/Fitter/ Carpentry / Electrician and plumber Position:1. Candidate must have gr12 certificate and relevant qualification for trade (Must have matric and trade qualifications certificates submitted with cv)2. Previous experience is a requirement3. No criminal record, this will be checked.4. Sober habits - Alcohol testing will be done daily5. Looking for a Boiler Maker, Fitter, plumber, electician and carpenter to fill in positions at our clients in the Bellville south, Somerset and Khaylitsha area. Please submit full cv with certificates and ID attached to application:Mark for attention : Boiler Maker and Fitter, Capentry, Electrician and Plumber positionsemail full cv to : recruitementct@raptosecholdings.co.za
6d
1
SavedSave
*Reference: JHB001827-DT-2*
Junior Accountant - George- Western Cape
Our client is looking for an* Junior Accountant* to join their team in George.*
*
The ideal candidate will apply principles of accounting to analyze financial information and prepare financial reports. Responsible for maintaining the general ledger and financial reporting.
*Duties:*
* Compiling & Maintenance of Fixed Asset Registers in MS Excel
* Processing/Compilation of Debtors Invoices, Statements & Reconciliations
* Processing/Compilation of Creditors Invoices & Reconciliations
* Capturing & Reconciliation of multiple Bank Accounts
* Compilation & Processing of Monthly & Adjusting Journals
* Monthly Loan Account Reconciliations
* Monthly Intercompany Transactions & Reconciliations
* Monthly Credit Card Account Capturing & Reconciliations
* Stock Management & Stock Counts
* Monthly Project Profit & Loss Statements
* Income Statement & Balance Sheet Management
* General Ledger Reconciliations
* Monthly Salaries & Wages Journals & Reconciliation
* Monthly Management Accounts
* Compilation & Submission of Statutory Returns (VAT, PAYE, UIF, etc) & Reconciliations
* Setup & Management of Annual & Monthly Budgets
* Cashflow Management
* Preparation of Audit File
*Requirements*
* Matric Certificate
* Degree or Diploma in Accounting
* 5-10 years prior experience in Books to Trial Balance Accounting
* MS Office experience
* Prior experience on Pivot Tables, Vlookups, Conditional Formatting, Custom Fitters, IF Functions, Consolidation of Work Sheets and Macros will be beneficial
* Prior experience on Pastel Partner, Pastel Evolution, Sage and Quickbooks.
*About you*
* Good communication and influence skills
* Good interpersonal skills and customer building skills
* Strong numerical skills
* Financial decision-making skills
* Problem-solving skills
* Team player
* Take initiative and quick thinker
* Ability to work under pressure
* Exceptional planning and organizational skills
*APPLY NOW!
*
Visit our website for more opportunities:* (www.sydsenrecruit.com)(http://www.sydsenrecruit.com)
*
*FOLLOW US ON INSTAGRAM, FACEBOOK AND LINKEDIN*
R 15 000 - 20 000
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1Xzg2OTdfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1137257&xid=1555_8697
2y
Save this search and get notified
when new items are posted!
