Please note that our Terms of Use and Privacy Notice are applicable.
Filter & refine
Clear All
Results for tooling lathe in All Categories in South Africa
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to natasha@personastaff.co.za
and indicate your salary exp
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004788/N&source=gumtree
7h
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post-trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Ensure that all parts comply with the procurement register and data pack (Report any deviations). Check that all tools and equipment are available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to liza-nelle@personastaff.co.za
and indicate your s
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004789/LN&source=gumtree
7h
1
To ensure that all moulds and tools are processed through the tool room timeously and to a standard that will allow them to be run by production with minimal rejects.
Requirements:
Must be in possession of a Grade 12 School Leaving CertificateMust be a Trade Tested Toolmaker or Fitter/Turner MachinistThe Candidate must have sound knowledge of Pneumatics, welding, turning, milling and preferably CNC experience5 years working experience in an Automotive Manufacturing environment.
Responsibilities:
Ensuring that tools/moulds made in the Toolroom comply with ALL stipulated requirements.Ensure that tooling projects are completed within set timing constraints by clearly defined instructions and monitoring of staff.Planning for resource and material requirements.Staying within set budget parameters for tools/moulds. Tool/Mould MaintenanceMaintain and Repair all Tooling/Moulds used in the group so as to ensure minimal rejects or foam wastage.Develop new tooling or modify existing tooling when requiredDiagnose and repair faults on tooling during the production runManufacture basic tooling and production tooling to drawing or sample partMove, lift, lower and look after tooling Process/Productivity ImprovementsIdentify areas for improvement on Tool/Mould design and manufacture with a reduction in rejects and shortened lead time as the end result. FabricationDevelop and fabricate from complex drawingsMechanically cut, drill and punch fabrication materialsJoin metals using the resistance welding process, Weld work piece (oxy-acetylene welding, shielded metal arc welding, gas metal arc welding, gas tungsten arc welding)Remove metals using oxy-fuel and air-carbon arc gouging processesEnsure all equipment/machine tools are maintained and that tool room housekeeping is of a high standard at all times Maintenance Process (Scheduled)Receive Maintenance Schedules, interpret instructions and plan maintenance and repair workInspect the tooling and determine spares and consumables requirementsGenerate Job Requisitions for scheduled maintenance work (type of repair or maintenance, spares, quantities, time, etc.)Transport tools, equipment and spares to the work siteIsolate equipment, perform lockouts and make the work area safeConduct Preventive Maintenance activitiesPerform change overs in the production environmentPerform routine maintenanceAlign machines and equipmentDiagnose and repair faults on equipment and machinery during production/operationCommission and refurbish machines / equipmentOperate and monitor a drilling machine to produce componentsOperate and monitor a lathe to produce ...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xOTE3MjI3MDkzP3NvdXJjZT1ndW10cmVl&jid=1750638&xid=1917227093
9h
1
SavedSave
Job Description
Reading and interpreting blueprints, design schematics, and CAD drawings.Visualizing and computing metal shapes and tolerances.Designing jigs and templates as work aids in the fabrication of parts.Measuring and marking metal stock for machining.Setting up machine tools such as drills, lathes, grinders, and milling machines.Cutting and shaping blocks to specified dimensions, sheet metal fitting.
Filling, grinding, and shimming metals to ensure a smooth finish.Fitting and assembling tools and die parts.Inspecting finished dies and tools for defects, smoothness, and contour deformities.Conducting test runs with completed tools and dies.
Qualifications:
Matric
Trade Test: Tool, Jig and Die Maker
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMTc4NzUwNzM3P3NvdXJjZT1ndW10cmVl&jid=1209369&xid=3178750737
10h
1
SavedSave
General Information
An exciting opportunity has become available for a Tool Maker at our Client in Silverton Pretoria.
Qualifications
Matric
Trade Test: Tool, Jig and Die Maker
5 - 10 years experience
Requirements
Experience working as a tool and die maker.In-depth knowledge of machine tools and their uses.Ability to read and interpret blueprints and design schematics.Extensive experience with metalworking tools including drills, milling machines, grinders, and lathes.Ability to lift heavy objects and operate large machinery.Experience with quality control analysis.Excellent attention to detail.Advanced troubleshooting skills.
Duties and Responsibilities
Reading and interpreting blueprints, design schematics, and CAD drawings.Visualizing and computing metal shapes and tolerances.Designing jigs and templates as work aids in the fabrication of parts.Measuring and marking metal stock for machining.Setting up machine tools such as drills, lathes, grinders, and milling machines.Cutting and shaping blocks to specified dimensions.Filling, grinding, and shimming metals to ensure a smooth finish.Fitting and assembling tools and die parts.Inspecting finished dies and tools for defects, smoothness, and contour deformities.Conducting test runs with completed tools and dies.
Client Overview
Our client is a mechatronics innovation and development company that specialises in bespoke industrial turnkey solutions, comprising of robotics, machine building, automated guided vehicles, packaging solutions, telemetry smart factory & city systems, aluminium kits building solutions, automated torque tools, and spray painting solutions. Directech has been in operation for the past 26 years.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODAyMzYzMjU1P3NvdXJjZT1ndW10cmVl&jid=1141120&xid=3802363255
10h
1
SavedSave
Fitter and Turner.
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Skills and Knowledge Required
Preventative Maintenance Routines.
Welding (Mig Tig & Arc), Milling, and Turning.
Planning - Check that all part complies with procurement register and data pack.(Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
Drilling and/or slotting holes: Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Pneumatics and Hydraulics.
Gearboxes.
Water Systems and Cooling Towers.
Basic Electrical Experience.
Bearing and Shaft Changing.
Fault Finding and Diagnosis.
Lubrication.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Consultant Name: Megan Ockhuis
10h
1
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Salary: R120 - 150 p/hConsultant Name: Megan Ockhuis
10h
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements:
• Grade 12 / National Senior Certificate.
• Qualified Boilermaker Trade Test Certificate.
• Minimum of 1 -2 years’ post trade experience.
• A valid driver’s license with own reliable transport.
Skills and Knowledge Required:
•Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
•Welding – Mig, Tig and Arc
•Drilling and/or slotting holes. Proper use of hand drill, Mag base drill, machining machine, etc.
•Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc. (Prep for next phase)
•Machining and Fitting - Planning: Check that all part complies with procurement register and data pack. (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
•Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
•Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
•Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
•Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
•Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc. installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
10h
1
SavedSave
Fitter & Turner
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements:
• Grade 12 / National Senior Certificate.
• Section 13 Fitter and Turner Trade Test Certificate.
• 3 - 5 years post trade experience.
• Experience within a manufacturing environment (beneficial).
• Energetic, proactive and able to work under pressure.
• A valid driver’s license with own reliable transport.
Skills and Knowledge Required:
•Preventative Maintenance Routines.
•Welding (Mig Tig & Arc), Milling, and Turning.
•Planning - Check that all part complies with procurement register and data pack. (Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
•Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
•Drilling and/or slotting holes: Proper use of hand drill, Mag base drill, machining machine, etc.
•Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc. (Prep for next phase)
•Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack. (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
•Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
•Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
•Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
•Pneumatics and Hydraulics.
•Gearboxes.
•Water Systems and Cooling Towers.
•Basic Electrical Experience.
•Bearing and Shaft Changing.
•Fault Finding and Diagnosis.
•Lubrication.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
10h
Well established Manufacturing company based on the East Rand has an urgent vacancy for a CNC Lathe Programmer Supervisor with Edgecam experience.The main objective of the CNC Programmer is to fully optimize the functionality of the CNC Machines and to ensure that every product meets the highest quality and efficiency standards. The CNC Programmer, using Edgecam software, must have the ability to perform own set ups - and experience with adjusting the CNC programs whilst utilizing excellent manual programming skills to run the programs which have been created on the applicable CNC machines to produce high quality flanges and fittings.
Qualifying Experience:
Matric with MathematicsRelevant tertiary qualification (N3 or higher)Trade Test CertificateIdeally minimum 5 years’ Programming experience in a manufacturing/engineering/ production/turning environment.Be fully competent and able to program with Edgecam (Turning)Be fully competent and able to program with G-CodesCNC Tooling Knowledge inclusive of Speeds and FeedsThorough knowledge of precision measuring equipment and ability to use it.Comprehensive understanding of different material grades and characteristics.Traceable references and minimum 3years working experience in this position.Working knowledge of OHSAProficient computer skills (MS Office)Valid Driver’s license and own reliable transportProgram and setup following machines:
Hyundai Kia CNC Lathe Skt 21 with C/CSeiki Hi Turner 21 CNC Lathe with C/CGeorge Fischer CNC Lathe
RESPONSIBILITIES AND SKILLS:
Review and utilize existing programs and create new CNC programs in Edgecam.Reading and interpreting technical drawings, create program, to set up the CNC machines as per drawings.Analyse job orders, drawings specifications and design data to calculate dimensions, tool selections, machine speeds and feed rates.Creating, optimizing, and troubleshooting machine programs, ensuring that each job runs seamlessly.Designing and manufacturing of Jigs and special tooling.Planning and prioritizing jobs and completing urgent/critical jobs as operational requirements demand.Maintain continuity between workstations by communicating requirements and documenting irregularities as needed.Knowledge of required tooling required to cut particular materials and program machines accordingly with minimal downtime and minimal waste.Running of tool orders and stock control.Setting up machines (, including jaws, tools, jigs, stops, offsets) / adjusting machine settings to the desired product specifications using FANUC
During the Set- Up of Jobs, ensure correct and efficient Job card time capturing for costing.Direct, guide and mentor staff as required, assist machine operators on technical issues and planning of jobs.Monitor quality, accuracy and efficiency of teams work in terms of finished parts and tools and report any issues or possible improvements required.Train on boarding employees to operate CNC machinery and equipment.Work clo
SECTOR: Engineering and Technical
Job Reference #: JHB000349/AH
10h
1
SavedSave
Our client in the Manufacturing industry based in Port Elizabeth is currently looking to employ a CNC Toolmaker/ Programmer.
An awesome career opportunity awaits.
Requirements:
Qualified Tool Jig and Die Maker or relevant Trade essential to positionMinimum N3.Minimum 5 years’ experience in Die Maintenance / Tooling.Thorough knowledge of Tooling in Production Environment.TIG Welding and Conventional Lathe experience, CNC programming, setup, and machining to specification.Knowledge of Quality SpecificationsMinimum 5 years’ experience in CNC set ups and programming – on Milling and Lathe CNC
Responsibilities:
Compile and submit the required Maintenance change-over schedule based on shot count performance, recorded at each Demo to the Foundry Manager daily, schedule replacement moulds as per policy.Complete Trial Proposal or Engineering Change Request documentation illustrating the required changes.Record equipment breakdowns by completing a Maintenance Job Card and submitting this to Maintenance Artisan.Plan Material requirements for machining purposes, ensuring best quality or protocol is maintained.Liaise with Supervisor, to ensure machining programs are correct, settings accurate and tooling allocation appropriate.Assist with basic Machine maintenance and/or problem solving as and when required to assist or provide input.Provide and maintain the foundry with tooling to achieve the production plan.Plan and schedule work for shift artisans when needed.Programming on CNC machines, with DXF, VQC or manual programming.Strictly adhere to the health, safety and Environmental (HSE) policy of the Company.
Other Requirements:
Excellent attendance record and Impeccable disciplinary record.Ability to read and interpret engineering drawings.Computer literacy – Excel and Word.CNC programming, Setups, G- Codes and M-Codes.Good decision making and problem-solving skills and ability to work under pressure.Willing to work over weekends and to assist on shifts as and when required.Good Communication Skills with Strong Problem-Solving Skills.
Please note should you not receive a response within two weeks of applying please consider your application unsuccessful.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNTE3ODU4NDAxP3NvdXJjZT1ndW10cmVl&jid=1474611&xid=2517858401
10h
1
SavedSave
Please note that this position is based in The Middle East, relocation, accommodation and additional benefits apply
CNC Machine Operator
A global leader in the design, manufacturing, and rental of advanced Oil & Gas drilling equipment and cutting-edge downhole tools for vertical, directional, and horizontal drilling applications with a strong commitment to innovation is seeking a skilled and experience CNC Machine Operator.
The CNC Machine Operator will be responsible for setting up, operating, and maintaining CNC machines to produce precision components that meet exacting standards. The ideal candidate will hold an N6 or equivalent qualification in relevant fields and possess a minimum of 3 years of hands-on experience in CNC machining, preferably within a machine shop or Oil & Gas drilling equipment environment, with a machining background under API standards.
Key Responsibilities:
Set up and prepare CNC machines for operation, ensuring all necessary tools, materials, and programs are in place to facilitate efficient and accurate production.Operate CNC machinery, including lathes, mills, and other equipment, following established procedures and safety guidelines. Monitor machine operations, making necessary adjustments to machining parameters to achieve optimal results and maintain quality standards. Perform routine maintenance tasks on CNC machines, such as cleaning, lubricating, and replacing worn or damaged parts, to ensure optimal machine performance.Collaborate with the manufacturing and quality control teams to troubleshoot issues, identify root causes of defects, and implement corrective actions.Read and interpret technical drawings, blueprints, and work orders to understand machining requirements and specifications. Maintain accurate records of production activities, including machine settings, tool changes, and production quantities.Contribute to the continuous improvement of machining processes and procedures, suggesting enhancements to increase efficiency and reduce waste.
Qualifications and Experience:
N6 or equivalent education in a relevant field.Minimum of 3 years of hands-on experience as a CNC Machine Operator.Proficiency in operating and setting up CNC machinery, with a machining background under API standards being highly desirable. Strong understanding of machining principles, tooling, and materials.Prior experience in a machine shop or Oil & Gas drilling equipment environment is preferred.
If you are a dedicated and skilled CNC Machine Operator looking for a rewarding opportunity within a global leader in the Oil & Gas industry, we encourage you to apply.
Location: This position is located in Saudi Arabia
Please note that by submitting your personal information to Deka Minas you free-willin...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMjY5NDA2OTgwP3NvdXJjZT1ndW10cmVl&jid=1682764&xid=2269406980
11h
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za
and indicate your salary expec
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004764/MM&source=gumtree
11h
1
SavedSave
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Boilermaker with Fabrication Experience.
REQUIREMENTS:
Grade 12 / National Senior Certificate
Fitter and Turner Trade Test Certificate
Minimum of 2 years’ experience as a qualified Fitter and Turner in a manufacturing environment
Energetic, proactive and able to work under pressure
A valid driver’s license with own reliable transport
Skills and Knowledge Required
·Admin: Complete all Fabrication Request feedback paperwork. Complete MJR’s. Compile SOW and BOM for small FR. Complete all TSIS and H&S paperwork.
·Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
·Welding – Mig, Tig and Arc
·Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
·Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
·Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
·Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
·Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
. Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
·Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
·Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
11h
4
R 4,500
SavedSave
Wood lathe, model MC1100
850w speed • 500 - 2000.
Good working condition.
Including all the necessary chisels.
R4500.
Contact 0820641866
11h
3
R 110,000
SavedSave
kolie bezuidenhoutd 0814446738kolie.bez.cncpme@gmail.comDescription: PS – 1318Working area: 1300 x 1800mmMax engraving speed: 20000mm/minReposition accuracy: Spindle: 3.0KWSpindle speed: 600 – 2400rpm 6Tool Diameter: F3.175, F6, F12.7Dust collector power: 3.0KWProduct DetailsScope of Application:Apply to process the dimensional wave plate, cabinet doors, solidwood doors, craft wood doors, paint door, screen, craft fan window,shoe polisher, game machine cabinet, mahjong table and panelfurniture products.Features:1. The whole machine bed with steel structures welded, agingtreatment of vibration to ensure that can use without deformation.2. Y-axis adopts double motors to keep stable moving.3. High accuracy, Rack Rail drive method with high speed.4. Imported Square Liner Rail, high accuracy, heavy burthen.5. Advanced international technology vacuum with double cavity, extremely strong suction of the vacuum pump.6. Intelligent protecting working table. Humanization Design of lathe bed vacuum and T-slot with clamps as well and easy working.7. Vacuum System and lubrication system, just push the button and easy to complete regular maintenance.APPLICATIONSIndustries and usesIncludes: Extra toolbox with full set of bits - 3 of eachExtra ColletFree softwareFree trainingFREE LIFETIME TECHNICAL SUPPORT, THIS WILL SAVE YOU THOUSANDS IN THE FUTURE.Call Me Today for a free demo and no obligation quote.Items Available: 1Stock ID: kolie 81/171 YEAR WARRANTY ON ALL MACHINES Free training (Ts and Cs Apply)Free Installation (Ts and Cs Apply)
14d
3
R 1,300
SavedSave
(Brand New) Quick Change Tool Post, 250-300.16mm. With two Holders.For more info and viewing please contact us on 082 677 4168 or visit us at 20 Robertson Street, Knights, Germiston. Price Excluding VAT.
14h
2
R 1,000
SavedSave
(Brand New) Quick Change Tool Post, 200-250.16mm. With two Holders.For more info and viewing please contact us on 082 677 4168 or visit us at 20 Robertson Street, Knights, Germiston. Price Excluding VAT
14h
2
R 268,000
SavedSave
(Brand New) Bochi-Baoji Precision Center Lathe. Model: CS6266C. Distance Between Centers: 1500mm, Swing over the Bed: 660mm, Swing in the Gap: 870mm, Spindle Bore: 105mm. Complete with all standard accessories including QUICK CHANGE TOOL POST. For more info and viewing, please contact us on 082 928 1327 / 011 867 6321. Add: 20 Robertson Street, Knights, Germiston. Direct email: amtscc@icon.co.za Price Exc Vat
19h
10
R 190,000
SavedSave
kolie bezuidenhout 0814446738Description: PS-2030Working Area: 2000 x 3000mmMax engraving speed: 20000mm/minReposition accuracy: Spindle: 6KWSpindle speed: 6000 – 24000rpmTool Diameter: F3.175, F6, F12.7Dust collector power: 3.0KWVacuum power (Only for Vacuum Model):7.5KW6KW Air Cooling Spindle / Stepper /Clamp Table / Dust Collector6KW Air Cooling Spindle / Stepper /Vacuum Table / Dust Collector6KW Air Cooling Spindle / Servo /Vacuum Table / Dust CollectorPS 2030 RouterProduct DetailsScope of Application:Apply to process the dimensional wave plate, cabinet doors, solidwood doors, craft wood doors, paint door, screen, craft fanwindow, shoe polisher, game machine cabinet, mahjong table,computer table and panel furniture products.Materials:Wood, perspex, abs, forex, polystyrene, foam, rubber, leather,copper, bras, aluminium and more.Features:1. The whole machine bed with steel structures welded, agingtreatment of vibration to ensure that can use without deformation.2. Y axis adopts double motors to keep stable moving.3. High accuracy, rack rail drive method with high speed.4. Imported square liner rail, high accuracy, heavy burthen.5. Advanced international technology vacuum with double cavity,extremely, strong suction of the vacuum pump.6. Intelligent protecting working table. Humanization design oflathe bed vacuum and T-slot with clamps as well and eaxy working.7. Vacuum system and lubrication system, just push the buttonand easy to complete regular maintenance(For Vacuum Model Only).APPLICATIONSINCLUDES:Dust CollectorDust Collector BootToolbox with Extra bits and toolsExtra ColletUcanCam SoftwareClamp Table : Extra ClampsVacuum Table: Vacuum pump & rubbers to sealPhone today for a free demo and assistanNC Professional your one stop CNC Manufacturetoday for a free demo and assistance in your langCNC Professional your one stop CNC ManufactureYEAR GUARANTEE LIFETIME AFTER SALES SUPPORTCALL KOLIE BEZUIDENHOUDT0814446738email;kolie.bez.cncpme@gmail.comItems Available: 1Stock ID: kolie 81/151 YEAR WARRANTY ON ALL MACHINES Free training (Ts and Cs Apply)Free Installation (Ts and Cs Apply)
14d
Save this search and get notified
when new items are posted!
