Please note that our Terms & Conditions and Privacy Notice are applicable.
Filter & refine
Clear All
Results for mppt charge controller in "mppt charge controller" in South Africa in South Africa
1
2
5
4
1
6
5KW
Solar Inverter M5000H-48BP - WiFi compatible- 5kVA / 5kW Pure Sine Wave 48V Inverter / 100A High
Voltage MPPT /Parallel
IP
Rating:
▪ IP20
▪ Not recommended for installation location with high humidity
▪ If the inverter needs to be installed close to the ocean
please make use of a dehumidifier
Built-in:
▪ 100A MPPT high voltage charge controller (from PV)
▪ Inverter charger (grid to battery, solar to battery)
▪ Bypass for grid to usage
Max
Watt Output:
▪ Continuous: 5kW / 5kVA
▪ Surge (5 seconds): 10kW
Charging
Source Settings:
▪ Can be set: Solar first, grid first, solar & grid, solar
only
▪ Solar only: 100A (maximum)
▪ Grid only: up to 80A
▪ Combination solar & grid: up to 140A
Solar
Input Specifications:
▪ PV Maximum input current: 18A
▪ MPPT Voltage range: 120 to 430Vdc
▪ PV Panels maximum: 6000W
Output
(discharge) Source:
▪ Solar first - Can be set
▪ Utility first (bypass) - Can be set
▪ Prioritized solar/battery/utility - Can be set
▪ Solar and utility joint
Dimensions:
▪ Boxed : 60cm L x 43cm W x 24cm H at 14kg
▪ Unit : 54.5cm L x 40.5cm W x 22cm H at 12kg
Monitoring
& Setting:
▪ Computer Connection: Serial port
▪ LCD screen
▪ WiFi
/ GPRS remote monitoring (Optional)
▪ CAN & RS485 port for BMS
communication
Expansion: Single Inverter
▪ Batteries minimum: 4 x 100Ah 12V
or
1 x 48V LiFePO4
▪ Peak Efficiency: 93%
▪ No Load Power Consumption: <50W
Expansion: More Inverters
▪ Single-phase: Up to 6 units = 30kVA
▪ Three-phase: Up to 6 units in total.
Different configurations, maximum 2 units per phase (2 + 2 + 2).
Unbranded: Same as Growatt SPF5000 ES and SACOLAR 5KW Inverter Made by Voltronicpower Last Stock only a few left.
20d
4
1
2
7
9
12
20247,000km
20247,000km
5mo
VERIFIED
12
ATLANTIC PARADISE POWER GENERATORS / PETROL / DIESEL / INVERTORS1) Mecer 2kVA 2kW Lithium Battery Inverter Trolley with 100Ah Lithium-ion Battery and 820W MPPT ControllerFeatures:Pure sine wave output2000 cycles lifePO4 batteryMains supply mode, Battery mode5VDC USB 2.0 ports12VDC output portsMPPT solar charge controllerOver charge protection as well as over discharge protectionIntelligent exhaust fanTechnical SpecificationRated Power: 2 000VA / 2 000W2) 6.5 kVA Silent Petrol Generator. 6500W output, ideal for load shedding, construction site, or last resort backup to your solar system.Maximum 6.5kVA, 230v, 3000RPM28 litre built in tankOpen Frame with wheels and handleElectric and Recoil Pull StartSingle Phase OutputIdeal for work-sites and buildersCompact robust design, Solid Wheels2 x 230v Sockets Output12v Battery Charging outputCircuit Breaker (2P)3) 5 kVA Diesel Generator - Digital ControllerMaximum 5.0kVA Standby, 230V, 3000 RPM16 litre tank : 8 Hours runtime @ 75% loadBuilt-in AVR delivers non fluctuating power12v Electric StarterSingle cylinder: vertical, direct injection Powerful Diesel EngineSingle Phase Output4.5kVA Prime Silent Diesel GeneratorWarranty: 12 Months or 500 Hours4) 6.5kVA Diesel Generator - Single PhaseMaximum 6.5kVA Standby, 230V, 3000 RPM16 litre tank : 7 Hours runtime @ 75% loadBuilt-in AVR delivers non fluctuating power12v Electric StarterSingle cylinder: vertical, direct injection Powerful Diesel EngineSingle Phase Output6.0kVA Prime Silent Diesel GeneratorWarranty: 12 Months or 500 Hours5) 11kVA Silent Diesel Generator. 11000W output, ideal to run most items in your home during load shedding. Run the whole house.Maximum 11kVA Standby, 230V, 3000 RPM60 litre tank : 15 Hours runtime @ 75% loadBuilt-in AVR delivers non fluctuating power12V Electric StarterIn-Line 2-cylinder 4-stroke Powerful Diesel EngineSingle Phase Output10kVA Prime Silent Diesel Generator6)20 kVA Silent Diesel Generator - 3 Phase. Ideal to run your whole home or office during load shedding. Run the whole house or office whenever there is a power outage.1500 RPM, ideal for backing up your Solar System for those unforeseen events such as storms, bad weather, cable theft and transformer failures. Maximum 22 kVA Standby, 380V, 1500 RPM40 litre tank : 11 Hours runtime @ 75% loadBuilt-in AVR delivers non fluctuating powerElectric Starter4-cylinder, 4-stroke Powerful Diesel EngineThree Phase Output20kVA Prime Silent Diesel GeneratorAll prices are subject to stock availability and subject to change without notice. CALL US NOW FOR A FREE QUOTE ON ANY GENERATOR OR SPECSTel: 011 6801491 MARK: 084 817 2205ARTHUR: 076 393 7930 Email: Atlantic@info@telkomsa.net
7mo
VERIFIED
1
The product applies to diversified loads because its digital design, pure sine wave output and excellent overcurrent protection can withstand the loads with a large starting current; the product is provided with independent solar three-stage charge management to improve charge efficiency of its battery and realize a longer life; the product provides universal 5VDC USB output port and 12VDC output to be widely applied to small solar power generation occasions including families, schools, street monitoring, forest monitoring, industrial and mining enterprises, frontier defense, sea islands, pasturing areas, etc.
Features
Excellent performance because of an MCU intelligent control technology
A wide range of applicable loads because of pure sine wave AC output
Convenient and practical 5VDC USB output port and 12VDC output port
Solar array and battery connrnon-anode system input
Charge by mains supply for flexible configuration (optional function)
Overcharge protection and overdischarge protection for a longer battery life
LCD and LEDS for visualization of operation status of the equipment
Overall automatic protection and alarms Including AC output over load protection, short circuit protection, etc.
Specifications
INVERTER
Battery voltage: 24V
In-built battery specification: 100AH/12Vx2
Rated power: 2000W
Output voltage: 220VAC
Output frequency: 50 / 60Hz
Output waveform: Pure Sine Wave
SOLAR INPUT
Maximum photovoltaic voltage (VDC): 100V
Charge voltage(VDC): 35V-100V
Rated charge current(A): MPPT 30A
Maximum power(Wp): 800Wp
Voltage of overcharge protection(VDC): 28.4V
Voltage of overcharge recovery(VDC): 28.0V
Voltage of floating charge(VDC): 27.4V
DC OUTPUT
Voltage of high-voltage protection(VDC): 32V
Voltage of high-voltage recovery(VDC): 30.4V
Voltage of low voltage recovery(VDC): 25.2V
Voltage of low voltage protection(VDC): 22V
12VDC output port: DC ports ( MAX 2A))
Starting temperature of the exhaust fan: >45 C
Ambient temperature for operation: 0-40 C
Ambient temperature for storage: -25 - +55 C
Operation/storage conditions: 0-90% (no condensation)
What's in the box
1 x Mecer 2Kw 24V 2x100A Battery
1 x Manual
1 x Power cord
1 x Handles
Strictly COD. Only available in Durban.
7mo
VERIFIED
1
This module adds support for advanced functions on for Marelli ECU's. MPPS covers a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, for Delphi, for Siemens, for Marelli, for Delco, for Sagem, for Trionic and many othersMPPS V18.12.3.8 Features:Read / Write of Micro, Flash and EEprom without using a BDM programmer!For Fiat 6F3- Full Read / Write Micro, Flash and EEprom over K-line and CAN.For Fiat 6JF - Full Read / Write Micro and EEprom over K-line.For Fiat 8DF - Full Read / Write Micro and EEprom over K-line.For Fiat 8F2 - Full Read / Write Micro and EEprom over K-line and CAN.For Fiat 8F3 - Full Read / Write Micro and EEprom over K-line and CAN.For Fiat 8GM - Full Read / Write Micro and EEprom over CAN.For Fiat 8GS - Full Read / Write Micro and EEprom over CAN.For Fiat 5SF3 - Full Read / Write Flash and EEprom over CAN.For Fiat 5SF3 - Full Read / Write EEprom over K-Line.For Fiat 5SF8 - Full Read / Write Flash and EEprom over K-line and CAN.For Fiat 5SF9 - Full Read / Write Flash and EEprom over CAN.For Fiat ME7.9.10 - Full Read / Write Micro over CAN.For Fiat ME7.6.3 - Full Read / Write Micro over CAN.For Opel 6O2 - Full Read / Write Micro, Flash and EEprom over K-line and CAN.For Opel 6O3 - Full Read / Write Micro, Flash and EEprom over K-line and CAN.For Opel 6JO - Full Read / Write Micro and EEprom over K-line.This module adds boot mode support for controllers with the tricore processor.Features:Auto detects ECU and processor type. No need to select from list, everything is automatic!Read/Write of all memories Eeprom, Irom, Xrom (where possible)Patch function for OBD Flashing of TPROT ECU's (supports only VAG at the moment)TPROT / DS check feature, for testing if TPROT is active without opening ECU.Supports For upto TP12Supports For Siemens (current only for ECU's without password protection),Support for unlocking of VAG Simos PCR and For Simos 8.Checksum Correction supported for MEDC17.The MPPS is a powerful programming tool. It offers general reading / writing operations and checksum support, however it also includes some additional features:Excellent recovery functions. In some cases MPPS can recover ECU's which others tools can not even make communications with. On certain controllers it even works when with no program is present (a blank memory).Selectable full / partial reading and writing when the ECU allows this function.Selectable reading / writing speed.Writing "changes only" function for faster programming (when supported by the ECU).Auto detection of K-Line/CAN, and option to bypass and force preferred means of communication.Temporary bypass of immobiliser to allow flashing on the bench on ME7 systems.Boot mode support for ECU's with C167 and ST10 processors.EEprom read/write functions for some ECU's are included.For VAG MEDC17 TPROT level checking without opening the ECU.Follow us on:Facebook: AutoleaderSAInstagram : AutoleaderSA
1y
2
Dual input 20A charger with selectable charge voltages
Enjoy more and relax
With award winning Swedish technology, the dual input D250SE allows you to enjoy your vehicle more with maximized battery capacity as the ideal charger for vehicles without access to a mains power supply.
The D250SE is a fully automatic, 5 step charger that supplies up to 20A of power to any 12V lead-acid or lithium* service battery from 40–300Ah. It has selectable charge algorithms for AGM and lithium* batteries and can use power through its dual input from alternator, solar panel and wind power. When the service battery is fully charged, the D250SE will automatically redirect maintenance charge power to the starter battery. The D250SE can maintain a stable output up to 20A to vehicles fitted with smart ECU controlled alternators and also has a temperature sensor for optimised charging, regardless of weather conditions. *) 12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP)
20A fully automatic temperature compensated charging for batteries from 40-300Ah while you’re on the move
Dual input (solar and alternator in parallel)
Smart alternator compatible
Selectable lithium* and lead-acid mode
Solar panel regulator with Maximum Power Point Tracking (MPPT)
*) 12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP)
Battery separation replacing diodes and VSR relays
Selectable AGM option – 14.4V or 14.7V
Maximised charging for better battery life and performance
Temperature sensor to compensate for hot or cold conditions
Splash and dust proof (IP65)
Compatible with SMARTPASS 120, SMARTPASS 120S for the ultimate 140A power management solution
2-year warranty
2y
VERIFIED
7
Save this search and get notified
when new items are posted!