Please note that our Terms & Conditions and Privacy Notice are applicable.
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Results for Mbombela / Nelspruit in Mbombela / Nelspruit
1
R 9,133
SavedSave
Please note that shipping and installation is not included.The new DAB Divertron 900 premium 0.75kW is practical to use. The new
retractable handle makes it easier to move the pump, while the hook is
designed to use a cord when the pump is lowered into a tank or well. Submersible multi-impeller pump
Features
High efficiency impellers. The techno polymer impellers are based on
in-depth research into fluid dynamics to increase performance: higher
efficiency with lower energy consumption.
New DAB Divertron 900 premium 0.75kW motor. The motor has been
redesigned to reduce consumption. But also to improve performance.
Mechanical seal. We have applied a mechanical sealing system that offers
two advantages: greater strength and durability, but also greater
efficiency, thanks to the combined action with the new hydraulics.
Integrated on/off electronics. The integrated electronic card manages
starting and stopping of the pump automatically in relation to the
water demand, without the need to install an external controller. This
prevents dry running of the pump in the event of a prolonged shortage of
water. Easier to install, and easier and safer to use.
Maximum flow rate: up to 6 m3/h
Maximum head: up to 920 WP1: up to 920 W
P2 nominal: up to 0,56 Kw (0,75HP)
Maximum immersion depth: 12 meters
Maximum ambient and liquid temperature: +40°C
Factory cut-in: 2,4 bar (±0,2)
Delivery thread: 1 inch
Pump maximum diameter: 160 mmVoltage: 230V
4d
Mbombela / Nelspruit
1
R 2,614
SavedSave
Please note that shipping and installation is not included.Firstly the DAB KPF Peripheral centrifugal pump with controller
0.37kW with compact dimensions. Able to generate high heads and suitable
for domestic installations, water supply systems, small gardening
applications, draining and filling cisterns, and for small industrial
uses.
Operating range: from 5 to 50 l/m with head up to 84 meters.
Brass pump body and motor support for KP 60/6 and KP 60/12. Cast iron
pump body with radial suction for KP and KPS, frontal suction for KPF.
Brass impeller. Carbon/ceramic mechanical seal. IP44.
Liquid temperature range: from 0 °C to +35 °C for domestic use, from -10°C to +50°C for other uses.
Controller Data:
Supply voltage: 1×230 Vac (+/- 10%) 50/60 HzMax. current: 12 AOutput: 1,1 – 2.2 kWProtection rating: IP 65Max. working pressure: 10 barMinimum flow rate: ≈ 1 l/minMale connection: 1’’ BSPRestart pressure setting: 1,5 Bar (non-adjustable)Max. working temperature: 60°C
The controller on the DAB KPF Peripheral centrifugal pump with
controller 0.37kW. Quick Press is an on/off device designed to control
the pump‘s starting and stopping based on demand. It stops the pump when
there is no water and protects it from dry running. It can be mounted
on surface and submersible pumps alike. The compact device is reliable
and designed, above all, for residential applications.
Correct quick press/pump pairingThe pump to be paired with the Quick Press device must not only meet
the system‘s water demand, but must also produce 1.5 bar more pressure
(with fixtures closed Q=0) than the Quick Press restart pressure. When
there is a water demand, namely when fixtures are opened, Quick Press‘s
preset restart pressure (1.5 bar) must overcome the back pressure
generated by the water column exerting pressure on the pump. Hence Quick
Press‘s restart pressure must be at least 0.5 bar higher than the back
pressure generated by the height of the water column.
4d
Mbombela / Nelspruit
1
R 4,097
SavedSave
Please note that shipping and installation is not included.Peripheral centrifugal pump with compact dimensions. capable to
generate high heads and suitable for domestic installations, water
supply systems, small gardening applications, draining and filling
cisterns, and for small industrial uses such as feeding pressurized
boilers (anti-condensation).
Operating range: from 5 to 50 l/m with head up to 84 meters.
Brass pump body and motor support for KP 60/6 and KP 60/12. Cast iron
pump body with radial suction for KP and KPS, frontal suction for KPF.
Brass impeller. Carbon/ceramic mechanical seal. IP44.
Liquid temperature range: from 0 °C to +35 °C for domestic use, from -10°C to +50°C for other uses.
Type: Peripheral
Discover the DAB KPF peripheral centrifugal pump 0.37kW – three phase
: A powerful and durable solution for precise irrigation. With a 0.37
kW motor and 230/400 V voltage, it efficiently delivers water over long
distances. Its corrosion-resistant design ensures longevity, making it
suitable for agricultural, orchard, greenhouse, landscaping, and
residential irrigation. Installation is straightforward, and it’s easy
to monitor. Elevate your irrigation with your reliable partner for
optimal water distribution.
CONSTRUCTION FEATURES OF THE PUMP
Brass pump body and motor support for KP 60/6 and KP 60/12. Pump body
with radial suction for KP and KPS; front suction for KPF. Cast iron
support with brass wear disc for KPS 30/16 and KP 38/18. KPS 30/16 is
available on request with bronze pump body and support. Brass impeller.
Carbon/ceramic mechanical seal
CONSTRUCTION FEATURES OF THE MOTORClosed asynchronous type, external ventilation cooling. Rotor running
on permanently lubricated ball bearings, oversized to ensure low noise
and durability. Standard built-in therm-amperometric protection.
Capacitor permanently fitted on single phase versions. For the
protection of the three-phase motor, we recommend the use of remote
overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
4d
Mbombela / Nelspruit
1
R 1,698
SavedSave
Please note that shipping and installation is not included.Peripheral centrifugal pump with compact dimensions. capable to
generate high heads and suitable for domestic installations, water
supply systems, small gardening applications, draining and filling
cisterns, and for small industrial uses such as feeding pressurized
boilers (anti-condensation).
Operating range: from 5 to 50 l/m with head up to 84 meters.
Brass pump body and motor support for KP 60/6 and KP 60/12. Cast iron
pump body with radial suction for KP and KPS, frontal suction for KPF.
Brass impeller. Carbon/ceramic mechanical seal. IP44.
Liquid temperature range: from 0 °C to +35 °C for domestic use, from -10°C to +50°C for other uses.
Type: Peripheral
Discover the DAB KPF Peripheral centrifugal pump 0.37kW: A powerful
and durable solution for precise irrigation. With a 0.37 kW motor and
230 V voltage, it efficiently delivers water over long distances. Its
corrosion-resistant design ensures longevity, making it suitable for
agricultural, orchard, greenhouse, landscaping, and residential
irrigation. Installation is straightforward, and it’s easy to monitor.
Elevate your irrigation with your reliable partner for optimal water
distribution.
CONSTRUCTION FEATURES OF THE PUMP
Brass pump body and motor support for KP 60/6 and KP 60/12. Pump body
with radial suction for KP and KPS; front suction for KPF. Cast iron
support with brass wear disc for KPS 30/16 and KP 38/18. KPS 30/16 is
available on request with bronze pump body and support. Brass impeller.
Carbon/ceramic mechanical seal
CONSTRUCTION FEATURES OF THE MOTORClosed asynchronous type, external ventilation cooling. Rotor running
on permanently lubricated ball bearings, oversized to ensure low noise
and durability. Standard built-in therm-amperometric protection.
Capacitor permanently fitted on single phase versions. For the
protection of the three-phase motor, we recommend the use of remote
overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
4d
Mbombela / Nelspruit
1
Contact f/price
SavedSave
Please note that shipping and installation is not included.DAB jet self-priming composite pump 1kW – single phase Technical Data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 1kW – single phase :
Pump body in technocpolymer and motor support in die cast aluminium.Impeller, diffuser, venturi tube and sand guard in technopolymerStainless steel wear ring.Carbon/ceramic mechanical seal.
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations.Suitable for small farms and gardening, small scale industrial services and where self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated thermo-amperometric protection and
permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41)
4d
Mbombela / Nelspruit
1
R 5,089
SavedSave
Please note that shipping and installation is not included.DAB jet self-priming composite pump 0.75kW – single phase Technical Data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 0.75kW – single phase:
Pump body in technocpolymer and motor support in die cast aluminium.Impeller, diffuser, venturi tube and sand guard in technopolymerStainless steel wear ring.Carbon/ceramic mechanical seal.
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations. Suitable for
small farms and gardening, small scale industrial services and where
self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated thermo-amperometric protection and
permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41)
4d
Mbombela / Nelspruit
1
R 3,128
SavedSave
Please note that shipping and installation is not included.DAB jet self-priming composite pump 0.75kW – single phase Technical Data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 0.75kW – single phase:
Pump body in technocpolymer and motor support in die cast aluminium.Impeller, diffuser, venturi tube and sand guard in technopolymerStainless steel wear ring.Carbon/ceramic mechanical seal.Inlet: 1″Outlet: 1″
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations. Suitable for
small farms and gardening, small scale industrial services and where
self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated thermo-amperometric protection and
permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41)
4d
Mbombela / Nelspruit
1
R 4,456
SavedSave
Please note that shipping and installation is not included.DAB jet self-priming composite pump 0.44kW – single phase Technical Data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 0.44kW – single phase:
Pump body in technocpolymer and motor support in die cast aluminium.Impeller, diffuser, venturi tube and sand guard in technopolymerStainless steel wear ring.Carbon/ceramic mechanical seal.
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations. Suitable for
small farms and gardening, small scale industrial services and where
self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated thermo-amperometric protection and
permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41)
4d
Mbombela / Nelspruit
1
R 3,524
SavedSave
Please note that shipping and installation is not included.Technical data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallized and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 0,6kW– single phase:
Pump body in techno polymer and motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical seal.
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations. Suitable for
small farms and gardening, small scale industrial services and where
self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated therno ampero metric protection
and permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41)
4d
Mbombela / Nelspruit
1
R 5,778
SavedSave
Please note that shipping and installation is not included.DAB jet self-priming composite pump 0.75kW – three phase Technical Data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 0.75kW – three phase:
Pump body in technocpolymer and motor support in die cast aluminium.Impeller, diffuser, venturi tube and sand guard in technopolymerStainless steel wear ring.Carbon/ceramic mechanical seal.Inlet: 1″Outlet: 1″
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations. Suitable for
small farms and gardening, small scale industrial services and where
self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated thermo-amperometric protection and
permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41)
4d
Mbombela / Nelspruit
1
R 6,254
SavedSave
Please note that shipping and installation is not included.DAB jet self-priming composite pump 1kW – three phase Technical Data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallized and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 1kW – three phase :
Pump body in technocpolymer and motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in technopolymerStainless steel wear ring.Carbon/ceramic mechanical seal.
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations.Suitable for small farms and gardening, small scale industrial services and where self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated thermo-amperometric protection and
permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41).
4d
Mbombela / Nelspruit
1
R 12,332
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 2.2kW – three phase
with excellent suction capacity even in the presence of air bubbles.
Important to realize it is suitable for pumping water with low levels of
sandy impurities. Especially used in domestic water supply
installations.
Afterwards it is suitable for small farms and gardening, small scale
industrial services and where self priming is necessary. For the purpose
of complete of ejector and diffuser for high priming capability.
Suitable for sucking from well up to 9 meter, provided in 3 different
material pump body: cast-iron, stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 2.2kW – three phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical sealInlet: 1″Outlet: 1″
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
4d
Mbombela / Nelspruit
1
R 6,583
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 1kW – three phase
with excellent suction capacity even in the presence of air bubbles.
Suitable for pumping water with low levels of sandy impurities.
Especially used in domestic water supply installations.
Suitable for small farms and gardening, small scale industrial
services and where self priming is necessary. Complete of ejector and
diffuser for high priming capability. Suitable for sucking from well up
to 9 meter, provided in 3 different material pump body: cast-iron,
stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 1kW – three phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical seal
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
4d
Mbombela / Nelspruit
1
R 13,674.99
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 1.8kW – three phase
with excellent suction capacity even in the presence of air bubbles.
Important to realize it is suitable for pumping water with low levels of
sandy impurities. Especially used in domestic water supply
installations.
Afterwards it is suitable for small farms and gardening, small scale
industrial services and where self priming is necessary. For the purpose
of complete of ejector and diffuser for high priming capability.
Suitable for sucking from well up to 9 meter, provided in 3 different
material pump body: cast-iron, stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 1.8kW – three phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical sealInlet: 1″Outlet: 1″
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
4d
Mbombela / Nelspruit
1
R 11,900
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 1.5kW – three phase
with excellent suction capacity even in the presence of air bubbles.
Suitable for pumping water with low levels of sandy impurities.
Especially used in domestic water supply installations.
Suitable for small farms and gardening, small scale industrial
services and where self priming is necessary. Complete of ejector and
diffuser for high priming capability. Suitable for sucking from well up
to 9 meter, provided in 3 different material pump body: cast-iron,
stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 1.5kW – three phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical seal
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
4d
Mbombela / Nelspruit
1
R 12,060
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 1.1kW – single phase
with excellent suction capacity even in the presence of air bubbles.
Important to realize it is suitable for pumping water with low levels of
sandy impurities. Especially used in domestic water supply
installations.
Afterwards it is suitable for small farms and gardening, small scale
industrial services and where self priming is necessary. For the purpose
of complete of ejector and diffuser for high priming capability.
Suitable for sucking from well up to 9 meter, provided in 3 different
material pump body: cast-iron, stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 1.1kW – single phase:
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical sealInlet: 1″Outlet: 1″
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 V
Three phase 230/400 V
4d
Mbombela / Nelspruit
1
R 6,081
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 0.75kW – three phase
with excellent suction capacity even in the presence of air bubbles.
Important to realize it is suitable for pumping water with low levels of
sandy impurities. Especially used in domestic water supply
installations.
Afterwards it is suitable for small farms and gardening, small scale
industrial services and where self priming is necessary. For the purpose
of complete of ejector and diffuser for high priming capability.
Suitable for sucking from well up to 9 meter, provided in 3 different
material pump body: cast-iron, stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 0.75kW – three phase:
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical sealInlet: 1″Outlet: 1″
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
4d
Mbombela / Nelspruit
1
R 4,713
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 0.6kW – three phase
with excellent suction capacity even in the presence of air bubbles.
Suitable for pumping water with low levels of sandy impurities.
Especially used in domestic water supply installations.
Suitable for small farms and gardening, small scale industrial
services and where self priming is necessary. Complete of ejector and
diffuser for high priming capability. Suitable for sucking from well up
to 9 meter, provided in 3 different material pump body: cast-iron,
stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 0.6kW – three phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical seal
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 V
Three phase 230/400 V
4d
Mbombela / Nelspruit
1
R 12,787
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 2.2kW – single phase
with excellent suction capacity even in the presence of air bubbles.
Important to realize it is suitable for pumping water with low levels of
sandy impurities. Especially used in domestic water supply
installations.
Afterwards it is suitable for small farms and gardening, small scale
industrial services and where self priming is necessary. For the purpose
of complete of ejector and diffuser for high priming capability.
Suitable for sucking from well up to 9 meter, provided in 3 different
material pump body: cast-iron, stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 2.2kW – single phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical sealInlet: 1″Outlet: 1″
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
4d
Mbombela / Nelspruit
1
R 6,087
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 1kW – single phase
with excellent suction capacity even in the presence of air bubbles.
Suitable for pumping water with low levels of sandy impurities.
Especially used in domestic water supply installations.
Suitable for small farms and gardening, small scale industrial
services and where self priming is necessary. Complete of ejector and
diffuser for high priming capability. Suitable for sucking from well up
to 9 meter, provided in 3 different material pump body: cast-iron,
stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 1kW – single phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical seal
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
4d
Mbombela / NelspruitSave this search and get notified
when new items are posted!