Please note that our Terms & Conditions and Privacy Notice are applicable.
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Results for Mbombela / Nelspruit in Mbombela / Nelspruit
1
R 10,539
SavedSave
Please note that shipping and installation is not included.Firstly Feka vs submersible pumps 0.75kW – three phase with micro
cast steel liquid vortex impeller, suitable for lifting sewage and drain
water in general containing solid matter with size up to 50 mm.
Construction Features Of The Pump
AISI 304 stainless steel pump body, seal cover, motor cover, and cap
with handle insulating rubber coated. Micro cast steel impeller.
Insulating rubber covered handle. AISI 316 stainless steel motor shaft.
Double mechanical seal with interposed oil chamber (non-toxic oil) in
carbon-alumina on the motor side, and silicon carbide/silicon carbide on
the pump side. Mechanical seal: Silicon Carbide
Construction Features Of The Motor
Dry, asynchronous and waterproof motor, cooled by the pumped liquid.
Rotor running on permanently lubricated ball bearings, selected to
ensure low noise and durability. Over current protection as standard for
the single-phase version, optional for the three-phase version.
Permanently connected capacitor in the single-phase version.
Continuous duty with liquid temperature 35 °C and completely
submerged pump. The single-phase version can be supplied with float for
automatic operation. Mechanical seal: Carbon/Alumina
DAB Feka vs submersible pumps 0.75kW – three phase Number of poles: 2 Max starts/hour: 20
Operating range: From 0 to 32 m3/h with head up to 14 meters.
Pumped liquid: Sewage water and used water in general, non aggressive.
Free passage: 50 mm.
Liquid temperature range: From 0 °C to +35 °C for domestic use (EN 60335-2-41). From 0 °C to +50 °C for other uses.
Maximum ambient temperature for operation with motor above water: +40 °C
Maximum immersion depth: 7 meters.
Motor protection class: IP 68
Insulation class: F
Power Inputs: 3 x 400 V
Installation: Fixed or portable, vertical position
Input Voltage A: 1.94
Output Voltage A: 11HP: 1
3d
Mbombela / Nelspruit
1
R 8,352
SavedSave
Please note that shipping and installation is not included.Firstly Stainless steel DAB Feka vs submersible pumps 0.55kW – three
phase with micro cast steel liquid vortex impeller, suitable for lifting
sewage and drain water in general containing solid matter with size up
to 50 mm.
Construction Features Of The Pump
AISI 304 stainless steel pump body, seal cover, motor cover, and cap
with handle insulating rubber coated. Micro cast steel impeller.
Insulating rubber covered handle. AISI 316 stainless steel motor shaft.
Double mechanical seal with interposed oil chamber (non-toxic oil) in
carbon-alumina on the motor side, and silicon carbide/silicon carbide on
the pump side. Mechanical seal: Silicon Carbide
Construction Features Of The Motor
Dry, asynchronous and waterproof motor, cooled by the pumped liquid.
Rotor running on permanently lubricated ball bearings, selected to
ensure low noise and durability. Over current protection as standard for
the single-phase version, optional for the three-phase version.
Permanently connected capacitor in the single-phase version.
Continuous duty with liquid temperature 35 °C and completely
submerged pump. The single-phase version can be supplied with float for
automatic operation. Mechanical seal: Carbon/Alumina
DAB Feka vs submersible pumps 0.55kW – three phase Number of poles: 2 Max starts/hour: 20
Operating range: From 0 to 32 m3/h with head up to 14 meters.
Pumped liquid: Sewage water and used water in general, non aggressive.
Free passage: 50 mm.
Liquid temperature range: From 0 °C to +35 °C for domestic use (EN 60335-2-41). From 0 °C to +50 °C for other uses.
Maximum ambient temperature for operation with motor above water: +40 °C
Maximum immersion depth: 7 meters.
Motor protection class: IP 68
Insulation class: F
Power Inputs: 3 x 400 V ~
Installation: Fixed or portable, vertical position
Power Cable: 10 meter H07RN-F, with plug for the single phase version.
Input Voltage A: 1.64
Output Voltage A: 11HP: 0.75
3d
Mbombela / Nelspruit
1
R 11,779
SavedSave
Please note that shipping and installation is not included.Firstly Stainless steel Feka vs submersible pumps 1kW – single phase
with micro cast steel liquid vortex impeller, suitable for lifting
sewage and drain water in general containing solid matter with size up
to 50 mm.
Construction Features Of The Pump
AISI 304 stainless steel pump body, seal cover, motor cover, and cap
with handle insulating rubber coated. Micro cast steel impeller.
Insulating rubber covered handle. AISI 316 stainless steel motor shaft.
Double mechanical seal with interposed oil chamber (non-toxic oil) in
carbon-alumina on the motor side, and silicon carbide/silicon carbide on
the pump side. Mechanical seal: Silicon Carbide
Construction Features Of The Motor
Dry, asynchronous and waterproof motor, cooled by the pumped liquid.
Rotor running on permanently lubricated ball bearings, selected to
ensure low noise and durability. Over current protection as standard for
the single-phase version, optional for the three-phase version.
Permanently connected capacitor in the single-phase version.
Continuous duty with liquid temperature 35 °C and completely
submerged pump. The single-phase version can be supplied with float for
automatic operation. Mechanical seal: Carbon/Alumina.
DAB Feka vs submersible pumps 1kW – single phase Number of poles: 2 Max starts/hour: 20
Operating range: From 0 to 32 m3/h with head up to 14 meters.
Pumped liquid: Sewage water and used water in general, non aggressive.
Free passage: 50 mm.
Liquid temperature range: From 0 °C to +35 °C for domestic use (EN 60335-2-41). From 0 °C to +50 °C for other uses.
Maximum ambient temperature for operation with motor above water: +40 °C
Maximum immersion depth: 7 meters.
Motor protection class: IP 68
Insulation class: F
Power Inputs: 1 x 220 V -240 V – 50Hz single phase
Installation: Fixed or portable, vertical position
Power Cable: 10 meter H07RN-F, with plug for the single phase version.
Input Voltage A: 6.63
Output Voltage A: 31HP: 1.36
3d
Mbombela / Nelspruit
1
R 12,089
SavedSave
Please note that shipping and installation is not included.Firstly Stainless steel Feka vs submersible pumps 1.2kW – single
phase with micro cast steel liquid vortex impeller, suitable for lifting
sewage and drain water in general containing solid matter with size up
to 50 mm.
Construction Features Of The Pump
AISI 304 stainless steel pump body, seal cover, motor cover, and cap
with handle insulating rubber coated. Micro cast steel impeller.
Insulating rubber covered handle. AISI 316 stainless steel motor shaft.
Double mechanical seal with interposed oil chamber (non-toxic oil) in
carbon-alumina on the motor side, and silicon carbide/silicon carbide on
the pump side. Mechanical seal: Silicon Carbide
Construction Features Of The Motor
Dry, asynchronous and waterproof motor, cooled by the pumped liquid.
Rotor running on permanently lubricated ball bearings, selected to
ensure low noise and durability. Over current protection as standard for
the single-phase version, optional for the three-phase version.
Permanently connected capacitor in the single-phase version.
Continuous duty with liquid temperature 35 °C and completely
submerged pump. The single-phase version can be supplied with float for
automatic operation. Mechanical seal: Carbon/Alumina
DAB Feka vs submersible pumps 1.2kW – single phase Number of poles: 2 Max starts/hour: 20
Operating range: From 0 to 32 m3/h with head up to 14 meters.
Pumped liquid: Sewage water and used water in general, non aggressive.
Free passage: 50 mm.
Liquid temperature range: From 0 °C to +35 °C for domestic use (EN 60335-2-41). From 0 °C to +50 °C for other uses.
Maximum ambient temperature for operation with motor above water: +40 °C
Maximum immersion depth: 7 meters.
Motor protection class: IP 68
Insulation class: F
Power Inputs: 1 x 220 V -240 V – 50Hz single phase
Installation: Fixed or portable, vertical position
Power Cable: 10 meter H07RN-F, with plug for the single phase version.
Input Voltage A: 8.63
Output Voltage A: 38HP: 1.6
3d
Mbombela / Nelspruit
1
R 9,740.99
SavedSave
Please note that shipping and installation is not included.Firstly Feka vs submersible pumps 0.75kW – single phase with micro
cast steel liquid vortex impeller, suitable for lifting sewage and drain
water in general containing solid matter with size up to 50 mm.
Construction Features Of The Pump
AISI 304 stainless steel pump body, seal cover, motor cover, and cap
with handle insulating rubber coated. Micro cast steel impeller.
Insulating rubber covered handle. AISI 316 stainless steel motor shaft.
Double mechanical seal with interposed oil chamber (non-toxic oil) in
carbon-alumina on the motor side, and silicon carbide/silicon carbide on
the pump side. Mechanical seal: Silicon Carbide
Construction Features Of The Motor
Dry, asynchronous and waterproof motor, cooled by the pumped liquid.
Rotor running on permanently lubricated ball bearings, selected to
ensure low noise and durability. Over current protection as standard for
the single-phase version, optional for the three-phase version.
Permanently connected capacitor in the single-phase version.
Continuous duty with liquid temperature 35 °C and completely
submerged pump. The single-phase version can be supplied with float for
automatic operation. Mechanical seal: Carbon/Alumina
DAB Feka vs submersible pumps 0.75kW – single phase Number of poles: 2 Max starts/hour: 20
Operating range: From 0 to 32 m3/h with head up to 14 meters.
Pumped liquid: Sewage water and used water in general, non aggressive.
Free passage: 50 mm.
Liquid temperature range: From 0 °C to +35 °C for domestic use (EN 60335-2-41). From 0 °C to +50 °C for other uses.
Maximum ambient temperature for operation with motor above water: +40 °C
Maximum immersion depth: 7 meters.
Motor protection class: IP 68
Insulation class: F
Power Inputs: 1 x 220 V -240 V – 50Hz single phase
Installation: Fixed or portable, vertical position
Input Voltage A: 5.13
Output Voltage A: 20HP: 1
3d
Mbombela / Nelspruit
1
R 9,850
SavedSave
Please note that shipping and installation is not included.Firstly Stainless steel Feka vs submersible pumps 0.75kW – single
phase with micro cast steel liquid vortex impeller, suitable for lifting
sewage and drain water in general containing solid matter with size up
to 50 mm.
Construction Features Of The Pump
AISI 304 stainless steel pump body, seal cover, motor cover, and cap
with handle insulating rubber coated. Micro cast steel impeller.
Insulating rubber covered handle. AISI 316 stainless steel motor shaft.
Double mechanical seal with interposed oil chamber (non-toxic oil) in
carbon-alumina on the motor side, and silicon carbide/silicon carbide on
the pump side. Mechanical seal: Silicon Carbide
Construction Features Of The Motor
Dry, asynchronous and waterproof motor, cooled by the pumped liquid.
Rotor running on permanently lubricated ball bearings, selected to
ensure low noise and durability. Over current protection as standard for
the single-phase version, optional for the three-phase version.
Permanently connected capacitor in the single-phase version.
Continuous duty with liquid temperature 35 °C and completely
submerged pump. The single-phase version can be supplied with float for
automatic operation. Mechanical seal: Carbon/Alumina
DAB Feka vs submersible pumps 0.75kW – single phase Number of poles: 2 Max starts/hour: 20
Operating range: From 0 to 32 m3/h with head up to 14 meters.
Pumped liquid: Sewage water and used water in general, non aggressive.
Free passage: 50 mm.
Liquid temperature range: From 0 °C to +35 °C for domestic use (EN 60335-2-41). From 0 °C to +50 °C for other uses.
Maximum ambient temperature for operation with motor above water: +40 °C
Maximum immersion depth: 7 meters.
Motor protection class: IP 68
Insulation class: F
Power Inputs: 1 x 220 V -240 V – 50Hz single phase
Installation: Fixed or portable, vertical position
Power Cable: 10 meter H07RN-F, with plug for the single phase version.
Input Voltage A: 5.13
Output Voltage A: 20HP: 1
3d
Mbombela / Nelspruit
1
R 7,880
SavedSave
Please note that shipping and installation is not included.Firstly Stainless steel DAB Feka vs submersible pumps 0.55kW – single
phase with micro cast steel liquid vortex impeller, suitable for
lifting sewage and drain water in general containing solid matter with
size up to 50 mm.
Construction Features Of The Pump
AISI 304 stainless steel pump body, seal cover, motor cover, and cap
with handle insulating rubber coated. Micro cast steel impeller.
Insulating rubber covered handle. AISI 316 stainless steel motor shaft.
Double mechanical seal with interposed oil chamber (non-toxic oil) in
carbon-alumina on the motor side, and silicon carbide/silicon carbide on
the pump side. Mechanical seal: Silicon Carbide
Construction Features Of The Motor
Dry, asynchronous and waterproof motor, cooled by the pumped liquid.
Rotor running on permanently lubricated ball bearings, selected to
ensure low noise and durability. Over current protection as standard for
the single-phase version, optional for the three-phase version.
Permanently connected capacitor in the single-phase version.
Continuous duty with liquid temperature 35 °C and completely
submerged pump. The single-phase version can be supplied with float for
automatic operation. Mechanical seal: Carbon/Alumina
DAB Feka vs submersible pumps 0.55kW – single phase Number of poles: 2 Max starts/hour: 20
Operating range: From 0 to 32 m3/h with head up to 14 meters.
Pumped liquid: Sewage water and used water in general, non aggressive.
Free passage: 50 mm.
Liquid temperature range: From 0 °C to +35 °C for domestic use (EN 60335-2-41). From 0 °C to +50 °C for other uses.
Maximum ambient temperature for operation with motor above water: +40 °C
Maximum immersion depth: 7 meters.
Motor protection class: IP 68
Insulation class: F
Power Inputs: 1 x 220 V -240 V – 50Hz single phase
Installation: Fixed or portable, vertical position
Power Cable: 10 meter H07RN-F, with plug for the single phase version.
Input Voltage A: 4.2
Output Voltage A: 20HP: 0.75
3d
Mbombela / Nelspruit
1
R 14,582
SavedSave
Please note that shipping and installation is not included.First thing to remember the Feka VS submersible grinder pump 1kW is a
single-stage submersible pump. Incorporating an AISI 630 stainless
steel shredder, designed for transferring untreated wastewater
containing stringy material.
It is suited to settings where a high head is required. Such as in
the case of pipework with a small diameter or where connection to the
public sewer is some distance away. Or when wanting to avoid the risk of
clogging. In addition, with its small footprint and both flanged and
threaded outlet ports, Feka VS Grinder is ideal as a replacement in
existing or outdated systems.
This is further testament to how DAB is attuned to the needs of all
market players, from the installer to the end user. Feka vs submersible
grinder pump 1kW is specifically sized to fully meet the functional,
performance and consumption requirements of the specific applications
for which it has been designed, ensuring maximum performance levels
without wasting energy and economic resources.
Finally wear-resistant materials, such as cast iron and stainless
steel, and performance capable of achieving heads of up to 25 meters,
come together to ensure an increasingly rewarding installation and user
experience, and a longer pump life
Technical Data
Flow rate: From 0 m3h to 14,4 m3hHead: 25 mPumped liquid: Sewage water, gray waterFree passage: N/ALiquid temperature: From 0°C to +40°C for domestic useOutlet: 1’’ 1/2 GAS – DN 32 and DN 40Outlet direction: Horizontal and vertical with curve kit accessoryImpeller: Vortex in cast iron, there is a shredderMotor protection degree: IP 68Thermal classification of the motor insulation: FPower cable type: H07RN8-FPossible type of installation: fixed or mobile in vertical positionMaximum immersion depth: 7 meters
3d
Mbombela / Nelspruit
1
R 34,823
SavedSave
Please note that shipping and installation is not included.Firstly the DAB Feka FXV submersible pumps 2.2kW – three phase is a
submersible pump for draining sewage water in commercial building
service. It is certified for the European Union standard EN 12050-1
which applies to sewage lifting containing faecal material in buildings
and construction sites. Pump suitable for fixed installations with a
coupling device or mobile if placed directly on the bottom of the tank.
High-performance super vortex impeller with solid handling up to 50
mm or 60 mm. The DAB Feka FXV submersible pumps 2.2kW – three phase is
suitable for liquid with solids and long fibers in suspension. The
reduced overall dimensions and the outlet ports both flanged and
threaded make it ideal for replacements.
Designed for quick maintenance thanks to a constructive solution that
provides easy access to the main components of the pump. Automatic
versions with power up to 1,5 kW. ATEX version available for use in
potentially explosive environments. (ATEX certifications: II2G Ex db k
IIB T4 or IEC EX: Ex db IIB T4 Gb).
Technical Data
Flow rate minimum and maximum: 62,8 m3/h
Head up to: 19,6 m
Immersion dept (maximum): 20 m
Type of pumped liquid: Waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.
Free passage: 50 mm or 65 mm depending on the model
Supported liquid temperature (maximum and minimum): + 50°C (+ 60°C for a short period of time)
Flange and threaded: From 2″, DN50, DN65
Impeller type: Vortex
Start time (maximum) per hour: 20/h
Class of protection: IP 68
Motor insulation class: F
Single phase power input: 1x 220-240V 50Hz
Three phase power input: 3x 400V 50Hz / 3x 230V 50Hz only on request
Maximum dry run time: 10 min
Power cable (m) and plug: 10 m
Possible type of installation: mobile when on the ground, fixed with coupling
Certification: EN 12050-1 ATEX
Special versions on request: different cable lengths, different voltages and frequencies
3d
Mbombela / Nelspruit
R 370,000
SavedSave
Hintech logger good working condition
3d
Mbombela / Nelspruit
1
R 32,907
SavedSave
Please note that shipping and installation is not included.Firstly the DAB Feka FXV submersible pumps 1.5kW – three phase is a
submersible pump for draining sewage water in commercial building
service. It is certified for the European Union standard EN 12050-1
which applies to sewage lifting containing faecal material in buildings
and construction sites. Pump suitable for fixed installations with a
coupling device or mobile if placed directly on the bottom of the tank.
High-performance super vortex impeller with solid handling up to 50
mm or 60 mm. The DAB Feka FXV submersible pumps 1.5kW – three phase is
suitable for liquid with solids and long fibers in suspension. The
reduced overall dimensions and the outlet ports both flanged and
threaded make it ideal for replacements.
Designed for quick maintenance thanks to a constructive solution that
provides easy access to the main components of the pump. Automatic
versions with power up to 1,5 kW. ATEX version available for use in
potentially explosive environments. (ATEX certifications: II2G Ex db k
IIB T4 or IEC EX: Ex db IIB T4 Gb).
Technical Data
Flow rate minimum and maximum: 62,8 m3/h
Head up to: 19,6 m
Immersion dept (maximum): 20 m
Type of pumped liquid: Waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.
Free passage: 50 mm or 65 mm depending on the model
Supported liquid temperature (maximum and minimum): + 50°C (+ 60°C for a short period of time)
Flange and threaded: From 2″, DN50, DN65
Impeller type: Vortex
Start time (maximum) per hour: 20/h
Class of protection: IP 68
Motor insulation class: F
Single phase power input: 1x 220-240V 50Hz
Three phase power input: 3x 400V 50Hz / 3x 230V 50Hz only on request
Maximum dry run time: 10 min
Power cable (m) and plug: 10 m
Possible type of installation: mobile when on the ground, fixed with coupling
Certification: EN 12050-1 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
3d
Mbombela / Nelspruit
1
R 34,823
SavedSave
Please note that shipping and installation is not included.Firstly the DAB Feka FXV submersible pumps 1.5kW – single phase is a
submersible pump for draining sewage water in commercial building
service. It is certified for the European Union standard EN 12050-1
which applies to sewage lifting containing faecal material in buildings
and construction sites. Pump suitable for fixed installations with a
coupling device or mobile if placed directly on the bottom of the tank.
High-performance super vortex impeller with solid handling up to 50
mm or 60 mm. The DAB Feka FXV submersible pumps 1.5kW – single phase is
suitable for liquid with solids and long fibers in suspension. The
reduced overall dimensions and the outlet ports both flanged and
threaded make it ideal for replacements.
Designed for quick maintenance thanks to a constructive solution that
provides easy access to the main components of the pump. Automatic
versions with power up to 1,5 kW. ATEX version available for use in
potentially explosive environments. (ATEX certifications: II2G Ex db k
IIB T4 or IEC EX: Ex db IIB T4 Gb).
Technical Data
Flow rate minimum and maximum: 62,8 m3/h
Head up to: 19,6 m
Immersion dept (maximum): 20 m
Type of pumped liquid: Waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.
Free passage: 50 mm or 65 mm depending on the model
Supported liquid temperature (maximum and minimum): + 50°C (+ 60°C for a short period of time)
Flange and threaded: From 2″, DN50, DN65
Impeller type: Vortex
Start time (maximum) per hour: 20/h
Class of protection: IP 68
Motor insulation class: F
Single phase power input: 1x 220-240V 50Hz
Three phase power input: 3x 400V 50Hz / 3x 230V 50Hz only on request
Maximum dry run time: 10 min
Power cable (m) and plug: 10 m
Possible type of installation: mobile when on the ground, fixed with coupling
Certification: EN 12050-1 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
3d
Mbombela / Nelspruit
1
R 24,992
SavedSave
Please note that shipping and installation is not included.Firstly the DAB Feka FXV submersible pumps 1.1kW – single phase is a
submersible pump for draining sewage water in commercial building
service. It is certified for the European Union standard EN 12050-1
which applies to sewage lifting containing faecal material in buildings
and construction sites. Pump suitable for fixed installations with a
coupling device or mobile if placed directly on the bottom of the tank.
High-performance super vortex impeller with solid handling up to 50
mm or 60 mm. The DAB Feka FXV submersible pumps 1.1kW – single phase is
suitable for liquid with solids and long fibers in suspension. The
reduced overall dimensions and the outlet ports both flanged and
threaded make it ideal for replacements.
Designed for quick maintenance thanks to a constructive solution that
provides easy access to the main components of the pump. Automatic
versions with power up to 1,5 kW. ATEX version available for use in
potentially explosive environments. (ATEX certifications: II2G Ex db k
IIB T4 or IEC EX: Ex db IIB T4 Gb).
Technical Data
Flow rate minimum and maximum: 62,8 m3/h
Head up to: 19,6 m
Immersion dept (maximum): 20 m
Type of pumped liquid: Waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.
Free passage: 50 mm or 65 mm depending on the model
Supported liquid temperature (maximum and minimum): + 50°C (+ 60°C for a short period of time)
Flange and threaded: From 2″, DN50, DN65
Impeller type: Vortex
Start time (maximum) per hour: 20/h
Class of protection: IP 68
Motor insulation class: F
Single phase power input: 1x 220-240V 50Hz
Three phase power input: 3x 400V 50Hz / 3x 230V 50Hz only on request
Maximum dry run time: 10 min
Power cable (m) and plug: 10 m
Possible type of installation: mobile when on the ground, fixed with coupling
Certification: EN 12050-1 \ ATEX
Special versions on request: different cable lengths, different voltages and frequencies
3d
Mbombela / Nelspruit
1
R 27,226
SavedSave
Please note that shipping and installation is not included.Firstly the DAB Feka FXV submersible pumps 0.7kW – single phase is a
submersible pump for draining sewage water in commercial building
service. It is certified for the European Union standard EN 12050-1
which applies to sewage lifting containing faecal material in buildings
and construction sites. Pump suitable for fixed installations with a
coupling device or mobile if placed directly on the bottom of the tank.
High-performance super vortex impeller with solid handling up to 50
mm or 60 mm. The DAB Feka FXV submersible pumps 0.7kW – single phase is
suitable for liquid with solids and long fibers in suspension. The
reduced overall dimensions and the outlet ports both flanged and
threaded make it ideal for replacements.
Designed for quick maintenance thanks to a constructive solution that provides easy access to the main components of the pump. Automatic
versions with power up to 1,5 kW. ATEX version available for use in
potentially explosive environments. (ATEX certifications: II2G Ex db k
IIB T4 or IEC EX: Ex db IIB T4 Gb).
Technical Data
Flow rate minimum and maximum: 62,8 m3/h
Head up to: 19,6 m
Immersion dept (maximum): 20 m
Type of pumped liquid: Waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.
Free passage: 50 mm or 65 mm depending on the model
Supported liquid temperature (maximum and minimum): + 50°C (+ 60°C for a short period of time)
Flange and threaded: From 2″, DN50, DN65
Impeller type: Vortex
Start time (maximum) per hour: 20/h
Class of protection: IP 68
Motor insulation class: F
Single phase power input: 1x 220-240V 50Hz
Three phase power input: 3x 400V 50Hz / 3x 230V 50Hz only on request
Maximum dry run time: 10 min
Power cable (m) and plug: 10 m
Possible type of installation: mobile when on the ground, fixed with coupling
Certification: EN 12050-1 ATEX
Special versions on request: different cable lengths, different voltages and frequencies
3d
Mbombela / Nelspruit
5
JOIN OUR AFFORDABLE TRAINING ✅ WE OFFER FREE ACCOMMODATION TO THOSE FROM FAR ✅ NO MATRIC NEEDED✅ PASSING GUARANTEED ✅ CONTACT US TODAY ON +27769563077 ☎ +27) 0137522465 the following machines MOVING MACHINESForklift 5 days training R 1500bulldozer 10 days training R 5000Dump Truck 8-10 days Training R 4,500Excavator 10 days training R 4,500Front End loader 8-10 days training R 3500L.H.D scoop 10 days training R 7,000Grader 10 days training R 5000Mobile crane 10 days training R 5,500over head crane 10 days training R 4,000Drill Rig 3 weeks R 7,000Tower crane 10 days training R 7,000T LB 10 days R 3,500Bob cat 8-10 days R 4,000SAFETY COURSESSafety manager : R 8000 for 10 daysSEMTRAC :R 18 000 for 60 daysAdvanced Construction & Safety Management : R 8000 for 10 daysAdvanced Rigging and Slinging : R 7 000 for 15 dayssafety Officer Practical & Implementation :R 8 000 for 10 daysFirst Aid Level 1-3 combination R 2 500 for 15 daysWorking At Heights & Fall Arrest & Rescue : R 6 000 for 10 daysDiesel Mechanic R18 000Electrical Engineering R18 000Mechanical Engineering R18 000WELDING COURSESArc welding 3 weeks R 6000Co2 welding 3 weeks R 7,000Argon welding 3 weeks R 6,000Boiler making 3 weeks R 10000Gas welding 5 weeks R 6,000Steel welding 3 weeks R 6,000Gas cutting 4 weeks R 6,000Rig welding 4 weeks R6 000Cutting torch R6 000PRACTICAL COURSESPLUMBING 3-4 weeks R 10,000Electrical Installation 2 weeks R 10000Computer 2 weeks R 3,500First Aid Volume Two 3 dayFirst aid Volume one 3 days training R 1500We are at 27 bester street African house building first floor room4website; https://www.lescotrainingcentre.comWhatsApp: +2776 956 3077
3d
Mbombela / Nelspruit
4
JOIN OUR AFFORDABLE TRAINING ✅ WE OFFER FREE ACCOMMODATION TO THOSE FROM FAR ✅ NO MATRIC NEEDED✅ PASSING GUARANTEED ✅ CONTACT US TODAY ON +27769563077 ☎ +27) 0137522465 the following machines MOVING MACHINESForklift 5 days training R 1500bulldozer 10 days training R 5000Dump Truck 8-10 days Training R 4,500Excavator 10 days training R 4,500Front End loader 8-10 days training R 3500L.H.D scoop 10 days training R 7,000Grader 10 days training R 5000Mobile crane 10 days training R 5,500over head crane 10 days training R 4,000Drill Rig 3 weeks R 7,000Tower crane 10 days training R 7,000T LB 10 days R 3,500Bob cat 8-10 days R 4,000SAFETY COURSESSafety manager : R 8000 for 10 daysSEMTRAC :R 18 000 for 60 daysAdvanced Construction & Safety Management : R 8000 for 10 daysAdvanced Rigging and Slinging : R 7 000 for 15 dayssafety Officer Practical & Implementation :R 8 000 for 10 daysFirst Aid Level 1-3 combination R 2 500 for 15 daysWorking At Heights & Fall Arrest & Rescue : R 6 000 for 10 daysDiesel Mechanic R18 000Electrical Engineering R18 000Mechanical Engineering R18 000WELDING COURSESArc welding 3 weeks R 6000Co2 welding 3 weeks R 7,000Argon welding 3 weeks R 6,000Boiler making 3 weeks R 10000Gas welding 5 weeks R 6,000Steel welding 3 weeks R 6,000Gas cutting 4 weeks R 6,000Rig welding 4 weeks R6 000Cutting torch R6 000PRACTICAL COURSESPLUMBING 3-4 weeks R 10,000Electrical Installation 2 weeks R 10000Computer 2 weeks R 3,500First Aid Volume Two 3 dayFirst aid Volume one 3 days training R 1500We are at 27 bester street African house building first floor room4website; https://www.lescotrainingcentre.comWhatsApp: +2776 956 3077
3d
Mbombela / Nelspruit
4
3d
Mbombela / Nelspruit
1
SavedSave
Minimum requirements for the role:Must have a relevant bachelors degree in business management or similar field; An agricultural qualification will be advantageousMinimum 3 5 years experience within a similar roleStrategic thinking and ability to implement relevant strategiesMust have business and financial acumen as well as sales and marketing expertiseSufficient crop protection and plant nutrition knowledge is essentialExcellent interpersonal and customer relationship management skillsMust have a valid drivers license and be willing to travel when requiredThe successful candidate will be responsible for:Being part of a strong Area Management team and working closely with skilled Crop Advisors, supporting producers and driving growth where it matters moston the farm.Overseeing regional commercial operations.Focusing on business unit support and strategic goals, market expansion, and operational execution.Working closely with the Executive Manager: Primary Business Channel.Coordinating cross-functional teams, supporting local strategies, and ensuring strong delivery to producers.Please note that subsequent to the screening and shortlisting process, all further communication will be entered into only with the shortlisted candidates. If you do not receive any feedback from us within 2 weeks of applying, please consider your application unsuccessful.
https://www.executiveplacements.com/Jobs/A/Area-Manager-Agrochemical-1204541-Job-Search-07-18-2025-10-26-16-AM.asp?sid=gumtree
6mo
Executive Placements
1
SavedSave
An established company within the manufacturing industry is seeking an experienced Buyer to join their team in Nelspruit. This role offers an excellent opportunity to contribute your procurement expertise in a dynamic industrial environment. The Key Responsibilities:ProcurementAccurate requisition and order managementConstantly liaising with suppliers, reviewing performanceContinuous stock managementImport order managementAdmin & FilingDriving duties as business requiresPersonnel management of storeMinimum Requirements & ExperienceGrade 12 with pure mathematics and physical scienceNQF 6 or higher in Supply Chain / Purchasing Management3+ years’ experience in Procurement, preferably in ManufacturingKnowledge of Customs Act with experience in Import and Export (desirable)Knowledge of Microsoft Office Package Skills RequiredMust have a valid driver’s license (code B / 8)Must be able and willing to work overtime when business requires including over weekendsReady to take the next step in your career?Submit your CV by following the online prompts and apply online.If you have not had any response in two weeks, please consider the vacancy application unsuccessful. Your profile will be kept on our database for any other suitable roles/positions.
https://www.executiveplacements.com/Jobs/B/Buyer-Procurement-1203443-Job-Search-07-16-2025-02-00-17-AM.asp?sid=gumtree
6mo
Executive Placements
1
SavedSave
Minimum requirements: Matric qualification5+ years of external sales experience Proven sales track record and ability to generate new businessStrong knowledge of sales processes, client engagement, and negotiationComputer literate, with excellent communication and presentation skillsSelf-driven, goal-oriented, and able to work independentlyWilling to travel within the assigned regionKey Responsibilities:Identify and engage potential clients through cold calling and networkingConduct meetings, product demonstrations, and negotiate sales agreementsMaintain long-term client relationships and achieve sales targetsStay updated on market trends, competitor activities, and sales strategiesCompile and submit regular sales performance reportsConsultant: Lynette Wolmarans - Dante Personnel Mpumalanga
https://www.jobplacements.com/Jobs/E/External-Sales-Representative-1195180-Job-Search-06-17-2025-10-55-40-AM.asp?sid=gumtree
7mo
Job Placements
Save this search and get notified
when new items are posted!