Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Home & Garden
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Suggested
Results for Home Appliances in Mpumalanga in Mpumalanga
1
R 3,195.67
SavedSave
Please note that shipping and installation is not included.PRODUCT DESCRIPTION
First thing to remember is that the Membrane housing First Line 4040 x
2 elements FRP – same side port is designed for continuous, long-term
use in reverse osmosis and ultra filtration applications. In industrial
and commercial water treatment systems at a pressure of 300 PSI.
The permissible working range is 10 ℃ to 49℃.
The pressure of the membrane housing penetration test is 1.5 times the standard pressure.
PRODUCT BENEFIT
100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultrafiltration, & Nanofiltration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″
Membrane housing First Line 4040 x 2 elements FRP – same side port
4″ FRP membrane housing
Material: FRP
End cap material: ABS
Max. working pressure: 300psi, 450psi, 600psi, 800psi,1000psi
Inlet port: 3/4″
Outlet port: 1/2″
So, the membrane housing 4040 FRP is a pressure vessel. In effect
which is used for loading membrane elements in a RO water treatment
system. The material of the membrane housing is divided into three
types, such as FRP, stainless steel, and PVC.
Membrane housing is relatively standard across the industry, it is
made with high-quality components and o-rings, which is the perfect
option for building your RO/DI system or replacing worn-out membrane
housing.
The membrane pressure vessels or membrane housings of Ro Agua can
achieve a variety of sizes, cover styles, pressure levels, and side or
end inlet designs.
15h
Mbombela / Nelspruit
1
R 3,467.66
SavedSave
Please note that shipping and installation is not included.
PRODUCT DESCRIPTION
First thing to remember is that the membrane housing First Line 4040 x
2 elements FRP – opposite side port is designed for continuous,
long-term use in reverse osmosis and ultra filtration applications. In
industrial and commercial water treatment systems at a pressure of 300
PSI.The permissible working range is 10 ℃ to 49℃. The pressure of the membrane housing penetration test is 1.5 times the standard pressure.
PRODUCT BENEFIT
100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultrafiltration, & Nanofiltration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″
Membrane housing First Line 4040 x 2 elements FRP – opposite side port
4″ FRP membrane housing
Material: FRP
End cap material: ABS
Max. working pressure: 300psi, 450psi, 600psi, 800psi,1000psi
Inlet port: 3/4″
Outlet port: 1/2″
So, the membrane housing 4040 FRP is a pressure vessel. In effect
which is used for loading membrane elements in a RO water treatment
system. The material of the membrane housing is divided into three
types, such as FRP, stainless steel, and PVC.
Membrane housing is relatively standard across the industry, it is
made with high-quality components and o-rings, which is the perfect
option for building your RO/DI system or replacing worn-out membrane
housing.The membrane pressure vessels or membrane housings of Ro Aqua can
achieve a variety of sizes, cover styles, pressure levels, and side or
end inlet designs.
15h
Mbombela / Nelspruit
1
R 2,883.92
SavedSave
Please note that shipping and installation is not included.
PRODUCT DESCRIPTION
First thing to remember is that the membrane housing First Line 4040 x
2 elements FRP – end port is designed for continuous, long-term use in
reverse osmosis and ultra filtration applications. In industrial and
commercial water treatment systems at a pressure of 300 PSI.The permissible working range is 10 ℃ to 49℃. The pressure of the membrane housing penetration test is 1.5 times the standard pressure.
PRODUCT BENEFIT
100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultrafiltration, & Nanofiltration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″
Membrane housing First Line 4040 x 2 elements FRP – end port
4″ FRP membrane housing
Material: FRP
End cap material: ABS
Max. working pressure: 300psi, 450psi, 600psi, 800psi,1000psi
Inlet port: 3/4″
Outlet port: 1/2″
So, the membrane housing 4040 FRP is a pressure vessel. In effect
which is used for loading membrane elements in a RO water treatment
system. The material of the membrane housing is divided into three
types, such as FRP, stainless steel, and PVC.
Membrane housing is relatively standard across the industry, it is
made with high-quality components and o-rings, which is the perfect
option for building your RO/DI system or replacing worn-out membrane
housing.The membrane pressure vessels or membrane housings of Ro Aqua can
achieve a variety of sizes, cover styles, pressure levels, and side or
end inlet designs.
15h
Mbombela / Nelspruit
1
R 2,334.96
SavedSave
Please note that shipping and installation is not included.
PRODUCT DESCRIPTION
First thing to remember is that the membrane housing First Line 4040
FRP – same side port is designed for continuous, long-term use in
reverse osmosis and ultra filtration applications. In industrial and
commercial water treatment systems at a pressure of 300 PSI.The permissible working range is 10 ℃ to 49℃. The pressure of the membrane housing penetration test is 1.5 times the standard pressure.
PRODUCT BENEFIT
100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultra filtration, & Nano filtration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″
4040 FRP 300psi ro membrane housing end entry and side entry
4″ FRP membrane housing
Material: FRP
End cap material: ABS
Max. working pressure: 300psi, 450psi, 600psi, 800psi,1000psi
Inlet port: 3/4″
Outlet port: 1/2″
So Membrane housing 4040 FRP is a pressure vessel. In effect which is
used for loading membrane elements in a RO water treatment system. The
material of the membrane housing is divided into three types, such as
FRP, stainless steel, and PVC.
Membrane housing is relatively standard across the industry, it is
made with high-quality components and o-rings, which is the perfect
option for building your RO/DI system or replacing worn-out membrane
housing.
The membrane pressure vessels or membrane housings of Ro Aqua can
achieve a variety of sizes, cover styles, pressure levels, and side or
end inlet designs.
15h
Mbombela / Nelspruit
1
R 2,681.48
SavedSave
Please note that shipping and installation is not included.
PRODUCT DESCRIPTION
First thing to remember is that the membrane housing First Line 4040
FRP – opposite side port is designed for continuous, long-term use in
reverse osmosis and ultra filtration applications. In industrial and
commercial water treatment systems at a pressure of 300 PSI.The permissible working range is 10 ℃ to 49℃. The pressure of the membrane housing penetration test is 1.5 times the standard pressure.
PRODUCT BENEFIT
100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultrafiltration, & Nanofiltration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″
Membrane housing First Line 4040 FRP – opposite side port
4″ FRP membrane housing
Material: FRP
End cap material: ABS
Max. working pressure: 300psi, 450psi, 600psi, 800psi,1000psi
Inlet port: 3/4″
Outlet port: 1/2″
So, the membrane housing 4040 FRP is a pressure vessel. In effect
which is used for loading membrane elements in a RO water treatment
system. The material of the membrane housing is divided into three
types, such as FRP, stainless steel, and PVC.
Membrane housing is relatively standard across the industry, it is
made with high-quality components and o-rings, which is the perfect
option for building your RO/DI system or replacing worn-out membrane
housing.The membrane pressure vessels or membrane housings of Ro Agua can
achieve a variety of sizes, cover styles, pressure levels, and side or
end inlet designs.
15h
Mbombela / Nelspruit
1
R 1,726.38
SavedSave
Please note that shipping and installation is not included.
PRODUCT DESCRIPTION
First thing to remember is that the membrane housing First Line 4040
FRP – end port is designed for continuous, long-term use in reverse
osmosis and ultra filtration applications. In industrial and commercial
water treatment systems at a pressure of 300 PSI.The permissible working range is 10 ℃ to 49℃. The pressure of the membrane housing penetration test is 1.5 times the standard pressure.
PRODUCT BENEFIT
100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultra filtration, & Nano filtration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″
4040 FRP 300psi ro membrane housing end entry and side entry
4″ FRP membrane housing
Material: FRP
End cap material: ABS
Max. working pressure: 300psi, 450psi, 600psi, 800psi,1000psi
Inlet port: 3/4″
Outlet port: 1/2″
So, the membrane housing First Line 4040 FRP – end port is a pressure
vessel. In effect which is used for loading membrane elements in a RO
water treatment system. The material of the membrane housing is divided
into three types, such as FRP, stainless steel, and PVC.
Membrane housing is relatively standard across the industry, it is
made with high-quality components and o-rings, which is the perfect
option for building your RO/DI system or replacing worn-out membrane
housing.The membrane pressure vessels or membrane housings of Ro Aqua can
achieve a variety of sizes, cover styles, pressure levels, and side or
end inlet designs.
15h
Mbombela / Nelspruit
1
R 1,612.12
SavedSave
Please note that shipping and installation is not included.
PRODUCT DESCRIPTION
First thing to remember is that he membrane housing 4040 FRP – end
port is designed for continuous, long-term use in reverse osmosis and
ultra filtration applications. In industrial and commercial water
treatment systems at a pressure of 300 PSI.
The permissible working range is -7 ℃ to 49℃.
The pressure of the membrane housing penetration test is 1.5 times the standard pressure.
PRODUCT BENEFIT
100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultra filtration, & Nano filtration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″
4040 FRP 300psi ro membrane housing end entry and side entry
4″ FRP membrane housing
Material: FRP
End cap material: ABS
Max. working pressure: 300psi, 450psi, 600psi, 800psi,1000psi
Inlet port: 3/4″
Outlet port: 1/2″
So , the membrane housing 4040 FRP is a pressure vessel. In effect
which is used for loading membrane elements in a RO water treatment
system. The material of the membrane housing is divided into three
types, such as FRP, stainless steel, and PVC.
Membrane housing is relatively standard across the industry, it is
made with high-quality components and o-rings, which is the perfect
option for building your RO/DI system or replacing worn-out membrane
housing.The membrane pressure vessels or membrane housings of Ro Aqua can
achieve a variety of sizes, cover styles, pressure levels, and side or
end inlet designs.
15h
Mbombela / Nelspruit
1
R 303.60
SavedSave
Please note that shipping and installation is not included.Membrane Housing 3012
Type
3012 Reverse Osmosis Membrane Housing
Cap Color
White
Housing Color
White
Operating pressure
Max. 125 PSI
Operating temperature
4 ~ 38℃(40 ~ 100℉)
Membrane Housing 3013
Model Number:
3013 model
Color:
White/grey
Usage:
filter housing for loading membrane
Product name:
3013 membrane housing
size:
3.0 inch & 13 inch
Material:
Food-grade Plastic PP
Capacity:
400-600 GPD membrane available
Function:
work with flow restrictor +one way valve
Item name:
pressure vessel 3013 400 RO membrane housing
Use:
Household Pre-Filtration
Certification:
ce
Type:
Reverse Osmosis
Membrane housing 3012/3013
Our membrane housings are designed and manufactured to accept
spiral/hollow fiber/ceramic and tuber membranes. They are used in
commercial water treatment and industrial liquid treatment worldwide.
Commercial Water TreatmentPharmaceutical water treatmentDialysis water treatmentDairy ProductsFood and BeverageMining wastewater treatmentSpecial separation
This reverse osmosis membrane element equips direct-process domestic
reverse osmosis equipment to provide consistent performance with long
service life. It is compatible with all 3013 membrane holders.This membrane is intended to operate in an osmosis system with a direct flow, without a tank.
Notes: Permeate of a single element may vary within [-20%] ~ [+20%]
Dimensions: 1.0 inch = 25.4 mm
15h
Mbombela / Nelspruit
1
R 158.70
SavedSave
Please note that shipping and installation is not included.
Type
1812 Reverse Osmosis Membrane Housing
Cap Color
White
Housing Color
White
Inlet and Outlet
1/4″
Threaded
NPT
Operating pressure
Max. 125 PSI
Operating temperature
4 ~ 38℃(40 ~ 100℉)
1812 100 GPD Super flow
1812 100 GPD Super flow – The Reverse Osmosis Membrane element is
designed for the treatment of low-salinity water resources such as tap
water, well water, etc. Working under extra-low pressure, it is
applicable to water purifying devices for residence, hospitals, and
laboratories.
Notes: Permeate of a single element may vary within [-20%] ~ [+20%]
Dimensions: 1.0 inch = 25.4 mm
TESTING CONDITIONS:
Testing Pressure ………………………………… 60 psi (0.41MPa)(0.41MPa)The temperature of Testing Solution ……………….. 25℃The concentration of Testing Solution (NaCl) ……… 250 ppmthe pH of Testing Solution ………………………….. 6.5~8.5Recovery of Single Element……………………. 15%
Reverse osmosis (RO) membrane elements for home drinking water are
the industry’s most reliable. Advanced membrane technology and automated
fabrication allow these elements to deliver consistent performance that
equipment suppliers, water treatment dealers, and residential customers
can rely on. Membrane elements are shipped dry for convenient handling
and long shelf-life. These elements are NSF/ANSI Standard 58 listed.
Equipment suppliers can take advantage of the membrane’s Standard 58
listing and participation in the NSF Data Transfer Protocol to reduce
costs for reduction claims for their systems. Reverse Osmosis home
drinking water elements are rated a 50 psi and will purify about 20%
more water than competitive elements rated at 60 psi (please see
reference charts on page two for more information).
Operating Limits
Membrane Type Polyamide: Thin-Film CompositeMaximum Operating Temperature: 113°F (45°C)Maximum Operating Pressure: 300 PSIG (21 bar)Maximum Feed Flow Rate: 2.0 GPM (7.6 lpm)pH Range, Continuous Operation: 2 – 11pH Range, Short-Term Cleaning: (30 min.)b 1 – 13Maximum Feed Silt Density Index (SDI): 5Free Chlorine Tolerance: < 0.1 ppm
The maximum temperature for continuous operation above pH 10 is 95°F (35°C).Refer to Cleaning Guidelines in specification sheet 609-23010.Under certain conditions, the presence of free chlorine and other
oxidizing agents will cause premature membrane failure.Since oxidation
damage is not covered under warranty, Film Tech recommends removing
residual free chlorine by pretreatment prior to membrane exposure.
Please refer to technical bulletin 609-22010 for more information.
15h
Mbombela / Nelspruit
1
R 4,713.39
SavedSave
Please note that shipping and installation is not included.Technical Specifications
Power: 80WInjection Range: 30-70m3Ozone Concentration: 15-25g/m3Unit Dimensions: 23cm x 18cm x 46.5cmPackage Dimensions: 32cm x 26cm x 51cmNet Weight: 5.1kgGross Weight: 5.9kgCooling Way: Air CoolingVoltage: 220V/50HzGas Feeding: Air SourceAir Pump Model: Air Pump 16LOuter Flow: 16LChassis Material: Carbon Steel Spray PaintedCooling Fans: 20W/12cm x 12cm x 3.8cm
Functions
Efficiently destroy a variety of bacteria and viruses, but without secondary pollution.Effectively remove residual pesticides from vegetables and fruits.Eliminate mold, smoke, and remove bad odor.Improve the oxygen level for air and water.Purifies the air and expedite human metabolism. Removes skin pore dirt, bacteria, and prevent freckles, acne, and pigmentation
Operating Environment
Ambient Temperature: -10˚C ~37˚CAmbient Humidity: ≤55%There should be no flammable or explosive gas and conductive power
dust in the room. It is not permittable to install the unit in a place
where alkaline air is easy to leak or with a risk of an explosion that
could occur.The ground for equipment installation must be horizontal, and the equipment should be placed on the ground or steady supportsThere must be a draft fan or air conditioner to keep the air dry and the operating environment in good ventilation.
Safety Notes
This series of products use 220V/50Hz AC power source. If the
voltage and frequency fluctuation range is heavy, this may cause damage
and equipment failure.The power cord plugs should keep in contact with the socket firmly.
If not, this may cause abnormal electricity usage, and even cause
electrocution.Users should regularly check the power cord, and avoid standing or putting heavy objects on the power cord.Please don’t use the unit in an environment that contains explosive products.In operation, the machine uses high voltage. Don’t open the back door or touch the inside of the unit when its plugged in.Avoid inside contact with water as this will damage the unit.
1d
Mbombela / Nelspruit
1
R 10,625.31
SavedSave
Please note that shipping and installation is not included.Ozone Generator, 5g/h, 201SS Enclosure can effectively and rapidly
kill bacteria, virus and other microbes in water, completely remove
organic compounds and other pollutants, without creating secondary
pollution. There will be chloroform, bromine dichlororomethane, carbon
tetrachloride and other chloridized products with carcinogenicity, if
polluted into water sources.
Ozone is safe to use in food processing, drinking water treatment,
sewage treatment and medical treatment. It is also a good alternative to
chlorine is swimming pools. Pool water treated with ozone is limpid and
transparent. Using Ozone eliminates some of the problems caused
chlorine like yellow hair, stimulation on eyes and respiratory tract.
Ozone Generator, 5g/h, 201SS Enclosure Specifications:
Capacity(g/h): 5Max. Output Concentration (g/m3): Oxygen source:25~ 45 ; Air source:5~15Electrical power supply: 220~240V, 50~60 HZ; 110V, 50~60 HZPower (W): 160Gas source: Oxygen or dry clean airCooling method: Air cooling
1d
Mbombela / Nelspruit
1
R 7,065.74
SavedSave
Please note that shipping and installation is not included.Ozone Generator, 3g/h, 201SS enclosure can effectively and rapidly
kill bacteria, virus and other microbes in water, completely remove
organic compounds and other pollutants, without creating secondary
pollution. There will be chloroform, bromine dichlororomethane, carbon
tetrachloride and other chloridized products with carcinogenicity, if
polluted into water sources.
Ozone is safe to use in food processing, drinking water treatment,
sewage treatment and medical treatment. It is also a good alternative to
chlorine is swimming pools. Pool water treated with ozone is limpid and
transparent. Using Ozone eliminates some of the problems caused
chlorine like yellow hair, stimulation on eyes and respiratory tract.
Ozone Generator, 3g/h, 201SS Enclosure Specifications:
Capacity(g/h): 3Max. Output Concentration (g/m3): Oxygen source:25~ 45 ; Air source:5~15Electrical power supply: 220~240V, 50~60 HZ; 110V, 50~60 HZPower (W): 140Gas source: Oxygen or dry clean air
1d
Mbombela / Nelspruit
1
R 11,145.71
SavedSave
Please note that shipping and installation is not included.Ozone Generator, 10g/h, 201SS Enclosure can effectively and rapidly
kill bacteria, virus and other microbes in water, completely remove
organic compounds and other pollutants, without creating secondary
pollution. There will be chloroform, bromine dichlororomethane, carbon
tetrachloride and other chloridized products with carcinogenicity, if
polluted into water sources.
Ozone is safe to use in food processing, drinking water treatment,
sewage treatment and medical treatment. It is also a good alternative to
chlorine is swimming pools. Pool water treated with ozone is limpid and
transparent. Using Ozone eliminates some of the problems caused
chlorine like yellow hair, stimulation on eyes and respiratory tract.
Ozone generator, 10g/h, 201SS enclosure Specifications:
Capacity(g/h): 10Max. Output Concentration (g/m3): Oxygen source:25~ 45 ; Air source:5~15Electrical power supply: 220~240V, 50~60 HZ; 110V, 50~60 HZPower (W): 180Gas source: Oxygen or dry clean air
1d
Mbombela / Nelspruit
1
R 5,907.09
SavedSave
Please note that shipping and installation is not included.If you are looking for the proven performance of a traditional steel
pressure tank in a lightweight composite design, C2-Lite CAD™ 60-liter
vertical pressure tank is the answer. Efficient and cost-effective,
C2-Lite CAD tanks are designed with the patented controlled action
diaphragm design of Challenger™ tanks.
Unlike other composite tanks that hide tired old bag technology in a
plastic shell, the patented CAD-2 diaphragm design is stronger and will
not crease and wear out. It features a 100% butyl diaphragm with a
precision molded co polymer polypropylene liner for superior air and
water separation. This patented design allows each size tank to have a
properly sized water chamber matched to the draw down performance of
that tank.
C2-Lite CAD™ 60-liter vertical pressure tank is designed for
efficient pressure management in small to medium systems. Its CAD-2
diaphragm prevents creasing and wear, ensuring long-lasting reliability.
The composite shell and precision-molded polypropylene liner provide
excellent corrosion resistance, even in coastal environments.
Pre charged to 1.4 bar / 20 psi and fitted with a 1″ BSPT connection,
this tank is ideal for coastal applications, irrigation, and small
booster systems. Its lightweight and weather-resistant construction
makes it easy to install and maintain in challenging conditions.Coastal applicationsBeach resorts & golf coursesBooster systemsWater wellsIrrigation systems
Temp Max: 49°C / 120.2°F
Pressure Pre charge bar: 1.4 bar / 20 psi
Nominal Volume: 60 Liter / 15.85 Gallon
Connection: 1″ BSPT (M)
Color: Grey
Pressure Max: 8.6 bar / 125 psi
Diameter: 42.1 cm / 16.6 in
16h
Mbombela / Nelspruit
1
R 19,363.47
SavedSave
Please note that shipping and installation is not included.If you are looking for the proven performance of a traditional steel
pressure tank in a lightweight composite design, C2-Lite CAD™ 450-liter
vertical pressure tank is the answer. Efficient and cost-effective,
C2-Lite CAD tanks are designed with the patented controlled action
diaphragm design of Challenger™ tanks.
Unlike other composite tanks that hide tired old bag technology in a
plastic shell, the patented CAD-2 diaphragm design is stronger and will
not crease and wear out. It features a 100% butyl diaphragm with a
precision molded co polymer polypropylene liner for superior air and
water separation. This patented design allows each size tank to have a
properly sized water chamber matched to the draw down performance of
that tank.
The C2-Lite CAD™ 450-liter vertical pressure tank offers
high-capacity pressure management with advanced corrosion-resistant
construction. The patented CAD-2 controlled action diaphragm ensures
unmatched durability, while the precision-molded polypropylene liner
provides superior air and water separation. Its composite shell is
weather-resistant and lightweight for easy handling and installation.
With a 1¼” BSPT connection and pre charged to 1.4 bar / 20 psi, this
tank is ideal for outdoor booster systems, irrigation, and water wells.
Its maintenance-free, no-sweat design ensures reliable performance in
the harshest environments.
Coastal applicationsBeach resorts & golf coursesBooster systemsWater wellsIrrigation systems
Temp Max: 49°C / 120.2°F
Pressure Pre charge bar: 1.4 bar / 20 psi
Nominal Volume: 450 Liter / 118.88 Gallon
Connection: 1.25″ BSPT (M)
Color: Grey
Pressure Max: 8.6 bar / 125 psi
Diameter: 61.8 cm / 24.3 in
16h
Mbombela / Nelspruit
1
R 7,380.24
SavedSave
Please note that shipping and installation is not included.Firstly if you are looking for the proven performance of a
traditional steel pressure tank in a lightweight composite design,.
Obviously the C2-Lite CAD™ 100-liter vertical pressure tank is the
answer. More over it is efficient and cost-effective, C2-Lite CAD tanks
are designed with the patented controlled action diaphragm design of
Challenger™ tanks.
Unlike other composite tanks that hide tired old bag technology in a
plastic shell. The patented CAD-2 diaphragm design is stronger and will
not crease and wear out. It features a 100% butyl diaphragm with a
precision molded co polymer polypropylene liner for superior air and
water separation. This patented design allows each size tank to have a
properly sized water chamber matched to the draw down performance of
that tank.
The C2-Lite CAD™ 100-liter / 26.42-gallon vertical pressure tank
combines the proven performance of GWS Challenger™ tanks with a
lightweight composite design. Its patented CAD-2 controlled action
diaphragm ensures precise air and water separation, preventing creasing
and wear for long-lasting durability. The 100% butyl diaphragm and
precision-molded polypropylene liner provide unmatched safety and
reliability.
With a 1″ BSPT connection and pre charged to 1.4 bar / 20 psi, this
tank is ideal for coastal applications, booster systems, and irrigation.
Its corrosion-proof composite construction and weather-resistant design
make it a dependable choice for challenging environments, including
beach resorts and water wells.
Coastal applicationsBeach resorts & golf coursesBooster systemsWater wellsIrrigation systems
Temp Max: 49°C / 120.2°F
Pressure Pre charge bar: 1.4 bar / 20 psi
Nominal Volume: 100 Liter / 26.42 Gallon
Connection: 1″ BSPT (M)
Color: Gray
Pressure Max: 8.6 bar / 125 psi
Diameter: 42.1 cm / 16.6 in
16h
Mbombela / Nelspruit
1
R 4,769.05
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Pressure Tanks With Replaceable Membrane Aquasystem-60L. In hydraulic
applications for sanitary water circuits, such as pressure groups in
combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 1.5 bar
Connection – 1″
Aquasystem Vertical Pressure Tanks With Replaceable Membrane Aquasystem-60L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
16h
Mbombela / Nelspruit
1
R 3,844.45
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Pressure Tanks With Replaceable Bladder 50L. Is an element used in
hydraulic applications for sanitary water circuits, such as pressure
groups in combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 1.5 bar
Connection – 1″
Aquasystem Vertical Pressure Tanks With Replaceable Bladder 50L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be over looked.
16h
Mbombela / Nelspruit
1
R 25,022.85
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Pressure Tanks With Replaceable Bladder 500L. Is an element used in
hydraulic applications for sanitary water circuits, such as pressure
groups in combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 2 bar
Connection – 1 1/2″Aquasystem Vertical Pressure Tanks With Replaceable Bladder 500L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safe guarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
16h
Mbombela / Nelspruit
1
R 16,504.80
SavedSave
Please note that shipping and installation is not included.The Aquasystem Vertical
Pressure Tanks With Replaceable Bladder 300L. Is an element used in
hydraulic applications for sanitary water circuits, such as pressure
groups in combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure, in order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to
pre charged air pressure stored between the membrane and the internal
metal surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard pre charge pressure – 2 bar
Connection – 1 1/2″
Aquasystem Vertical Pressure Tanks With Replaceable Bladder 300L
The main purpose of the pressure-tanks is to give water at a steady
pressure, in order to limit the pump hourly starts. Safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.
They provide
consistent water pressure, protect the pump from wear and tear, improve
energy efficiency. As well as provide a source of emergency water.
Whether you’re installing a new well water system or looking to upgrade
an existing one. A water pressure tank is a critical component that
should not be overlooked.
16h
Mbombela / NelspruitSave this search and get notified
when new items are posted!