Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Home & Garden
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Suggested
Results for Home Appliances in Mpumalanga in Mpumalanga
1
R 267.03
SavedSave
Please note that shipping and installation is not included.TANK SIZE: For tanks up to 5,000 liters use 1 In-tank chlorine
releasing tablet. For larger tanks (up to 7500 liters) use 2 or more
Water Tank Chlorine Dispenser. For larger tanks we recommend the use of
IN-LINE dispensing devices (such as the Klorman).WATER TESTING: To maintain necessary disinfectant levels, use
low-level chlorine test strips, or alternatively any ordinary swimming
pool chlorine test kit. In-tank chlorine releasing tablet protects against common water-borne bacteria, viruses and other pathogens
USE DIRECTIONS:
Remove dispenser from plastic pouch and unwind the anchor-cord.To adjust, turn dispenser upside down and tear off labels 1-3 to expose the desired number of apertures.DISPENSER DOES NOT FLOAT. Secure retrieval-cord
around an external anchor-point on tank BEFORE releasing the dispenser
into water. For optimal results ALWAYS suspend dispensers directly below
the incoming water flow, approximately 10cm below the water surface.It is useful to install a sampling valve at the reservoir exit-point
to enable testing. To test, open the sampling valve and run water for 5
seconds before taking water sample.
Carefully follow use-directions applicable to the test-kit or test method used.Disposal: Ensure contents are completely spent before disposal. Rinse thoroughly before disposal.
2d
Mbombela / Nelspruit
1
R 865
SavedSave
Please note that shipping and installation is not included.
Firstly Sodium Hypochlorite – 25l (12-15%) 25 . A 12% solution is
widely used in waterworks for the chlorination of water. A 15% solution
is more commonly used for disinfection of waste water in treatment
plants.
Sodium hypochlorite is widely used in various applications. It is
used on a large scale for water and surface purification, bleaching,
odour removal, and water disinfection. Sodium hypochlorite is light
yellow with a strong bleach odour. Sodium hypochlorite is a chemical
that is produced through the mixing of caustic soda, liquid chlorine and
water.
The anhydrous compound is unstable and may decompose explosively.
Sodium Hypochlorite – 25l in solution exhibits broad-spectrum
anti-microbial activity and is widely used in healthcare facilities in a
variety of settings. It is usually diluted in water depending on its
intended use. “Strong chlorine solution” is a 0.5% solution of
hypochlorite (containing approximately 5000 ppm free chlorine) used for
disinfecting areas contaminated with body fluids, including large blood
spills.Finally it may be made by diluting household bleach as appropriate
(normally 1 part bleach to 9 parts water). Such solutions have been
demonstrated to inactivate both C. difficile and HPV. “Weak
chlorine solution” is a 0.05% solution of hypochlorite used for washing
hands, but is normally prepared with calcium hypochlorite granules.
2d
Mbombela / Nelspruit
1
R 17,363.16
SavedSave
Please note that shipping and installation is not included.Vontron sea water reverse osmosis membrane SW22-8040 description
SW Series is always used for sea water desalination. It can improve
permeate flow by optimizing membrane element structure. This product has
the features of high rejection rate, stable performance, low operating
cost and small equipment investment. It should be used to obtain
qualified drinking water from sea water.
Application
Seawater desalination.Water reuse and near-zero discharge, for example: chemical industry, iron and steel industry, electric power industry, etc.Concentration of high-concentration materials, for example:pharmaceuticals materials, food and beverage materials, etc.
Model
Stable Rejection Rate(%)
Permeate Flow GPD(m3/d)
Active Membrane Area ft2(m2)
Feed Spacer Thickness mil
SW22-8040
99,9
6000(22,7)
400(37,2)
28
Operating Conditions and Limits
Maximum operating pressure psi(MPa)
1200 (8,28)
Maximum feedwater temperature ℃
45
Maximum inlet flow rate m3/h
17
Maximum concentration of free chlorine mg/L
0,1
Maximum pressure drop per element psi(MPa)
15 (0,1)
Allowed pH range for feedwater in operation
2-11
Allowed pH range for chemical cleaning
1-23
Maximum feedwater flow SDI15
5
2d
Mbombela / Nelspruit
1
R 2,467.85
SavedSave
Please note that shipping and installation is not included.Vontron Reverse-Osmosis Membrane ULP21-2540
The LP (low pressure) series of aromatic polyamide compound membrane
element developed by Vontron Technology Co., Ltd. has the properties of
low-pressure operation, high permeate flow, and excellent desalination
and is applicable to the desalination of brackish water. Besides, it is
particularly applicable to the fabrication of high-purity water for the
electronic industry and electric power industry owing to its excellent
performance in removing soluble salts, TOC, SiO2, etc. Being suitable
for desalting such water sources as surface water, underground water,
tap water, and municipal water, etc., the LP series is mainly applicable
to the treatment of various industrial water such as industrial-purpose
pure water, boiler water replenishment in power plants, and can be also
applied to such brackish water applications, such as treatment of
high-concentration saline wastewater and production of beverage-purpose
water.
Vontron Reverse-Osmosis Membrane ULP21-2540 Testing Conditions:
Testing Pressure………………………………………… 225 psi (1.55Mpa)The temperature of Testing Solution………………………… 25 °CThe concentration of Testing Solution (NaCl)……………… 2000ppmpH Value of Testing Solution…………………………… 7.5Recovery Rate of Single Membrane Element…………… 15%Operation limits and conditionsMax. Working Pressure………………………………… 600psi (4.14Mpa)Max. Feed water Flow…………………………………… 75gpm (17 m3/h) (for 8040)Max. Feed water Temperature…………………………… 45 °CMax. Feed water SDI………………………………………5Residual chlorine Concentration of Feed water……………<0.1ppmpH Range of Feed water during Continuous Operation……3~10pH Range of Feed water during Chemical Cleaning………2~12Max. Pressure Drop of Single Membrane Element……… 15psi (0.1Mpa)
Vontron Reverse-Osmosis Membrane ULP21-2540 Important InformationAny specific application must be limited within the Operating Limits
and Conditions. We strongly recommend you to refer to the latest edition
of the technology manual and design guide prepared by Vontron
Technology Co., Ltd., or consult experts proficient in membrane
technology.
2d
Mbombela / Nelspruit
1
R 476.93
SavedSave
Please note that shipping and installation is not included.Vontron RO Menbrane 2012 100 GPD
TESTING CONDITIONS:
Testing Pressure ……………………………….......… 100 psi (0.41MPa)The temperature of Testing Solution ………….…….. 25℃The concentration of Testing Solution (NaCl) ……… 250ppmThe pH of Testing Solution …………………….…….. 6.5~8Recovery of Single Element………….......…….……. 15%
Parameters Of A Vontron RO Menbrane 2012 100 GPD
250 TDS Filtered (5µ), De-Chlorinated, Municipal Feed Water, 77˚F,
40% Permeate Recovery, 6.5-7.0 pH Range, at the Specified Operating
Pressure.Data Taken After 30 Minutes of Operation.Maximum Pressure Drop for Each Element is 10psi.Minimum Salt Rejection is 96%.
Permeate Flow for Individual Elements may vary ± 20%.
While in storage, membrane elements must be kept sealed and moist.
While drying out may occur and damage the membrane permanently. To
prevent elements from freezing or being exposed to direct sunlight, we
take additional measures. Well tested elements are vacuum-sealed in a
polyethylene oxygen barrier bag containing 2012 100 GPD Membrane
Preservative and then packaged in a cardboard box. Discard the permeate
for the first twenty-four hours of operation. Do not use the first full
tank of permeate for drinking or food preparation. The permeate flow
(product water flow) varies with feed water temperature. Review a
Temperature Correction Chart. For membrane warranty information, please
contact the manufacturer.
Important Operation Notes:
When this product is used for the first time, permeate water obtained from the first hour of use should be discarded.Also keep elements moist at all times after initial wetting.If you do not strictly follow the operating limits and guidelines
stated in this Product Information Bulletin, the Limited Warranty will
be void.To prevent biological growth during prolonged system shutdowns, it
is recommended that membrane elements be immersed in a preservative
solution. Rinse out the preservative before use.The OEM is fully responsible for the effects of incompatible
chemicals and lubricants on elements. The use of any such chemicals or
lubricants will void the Limited Warranty.
2d
Mbombela / Nelspruit
1
R 2,905.04
SavedSave
Please note that shipping and installation is not included.Vontron Reverse Osmosis Membrane ULP21-4021 series of extremely
low-pressure aromatic polyamide compound membrane elements can work
under ultra-low pressure to reach as high permeate flow and salt
rejection as regular low-pressure membrane elements can, and is
applicable to desalination of surface water and underground water.
It operates under approximately half the operating pressure of a
regular low-pressure composite membrane and achieves a salt rejection
rate of up to 99.0%, which can decrease the investment costs for such
relevant facilities as pump, piping, and container, etc. and the
operating cost for the RO system, thus increasing the economic
efficiency.
Being suitable for the desalination treatment of those water sources
with low salinity not requiring high salt rejection such as surface
water, underground water, tap water, and municipal water, which have a
salt concentration lower than 1000 ppm, XLP series of membrane elements
is particularly applicable to the second-pass desalination with two-pass
RO system, and is mainly applied to numerous applications of various
scales, such as pure water production, boiler water replenishment,
foodstuff processing, and pharmaceutical production.
Vontron Reverse Osmosis Membrane ULP21-4021
Model
Active Membrane
Area ft2(m2)
Average Permeate
GPD(m3/d)
Stable Rejection
Rate %
Min. Rejection
Rate %
XLP11-4040
90（8.4）
2000（7.6）
98.0
97.5
Testing
Conditions
Testing Pressure
Testing Solution Temperature
Concentration of Testing Solution (NaCl)
pH value of Testing Solution
Recovery Rate of Single Element
100 psi (0.69MPa)
25˚C
500ppm
7.5
15%
Operation Limits & Conditions
Max. Working Pressure
Max. Volume of Feedwater
Max. Temperature of Feedwater
Max. Feedwater SDI15
pH Range of Feedwater during Continuous Operation
pH Range of Feed Water during Chemical Cleaning
Residual Chlorine Concentration of Feed Water
Max. Pressure Drop of Single Membrane Element
Max. Pressure Drop of Single Pressure Vessel with Six RO Membranes600psi(4.14MPa)
16gpm（3.6 m3/h）
4˚C
5
3~10
2~12
<0.1ppm
15psi (0.1MPa)
50psi (0.34MPa)
2d
Mbombela / Nelspruit
1
R 11,164.34
SavedSave
Please note that shipping and installation is not included.Firstly Vontron reverse osmosis membrane ULP22-8040 ultra-low
pressure aromatic polyamide compound membrane element. Newly developed
by Vontron Membrane Technology Co.Ltd. Can work under ultra low pressure
to reach as high permeate flow and rejection same as regular
low-pressure membrane element.
Is applicable to desalination of surface water and underground water.
It operates under approximately two thirds of the operating pressure of
regular low-pressure composite membranes,
which can decrease the investment costs for such relevant facilities as
pumps, pipelines, and containers, etc. and the operating cost for the
RO system, thus increasing the economic efficiency.
Applicable to desalination treatment of those water sources with NaCl
lower than 2000 ppm, such as surface water, underground water, tap
water and municipal water, ULP series membrane elements are mainly
applicable to such as pure water, boiler water replenishment, foodstuff
processing, and pharmaceutical production.
The LP (low pressure) series of aromatic polyamide compound membrane
element developed by Vontron Membrane Technology Co., Ltd. has the
properties of low-pressure operation, high permeate flow and excellent
desalination and is applicable to desalination of brackish water.
Besides, it is particularly applicable to fabrication of high-purity
water for electronic industry and electric power industry owing to its
excellent performance in removing soluble salts, TOC, SiO2, etc.
Being suitable for desalting such water sources as surface water
(NaCl ≤10000ppm), underground water, tap water and municipal water,
etc., LP series is mainly applicable to treatment of various industrial
water such as industrial-purpose pure water, boiler water replenishment
in power plants, and can be also applied to such brackish water
applications, such as treatment of high-concentration saline waste water
and production of beverage-purpose water.
Performance parameters of the membrane element
Model
Active Membrane
Area
ft2(m2)
Average Permeate
GPD(m3/d)
Stable Rejection
Rate %
Min. Rejection
Rate %
ULP22-8040
400（37.2）
12100 (45.7)
99.0
99.5
Testing
Conditions
Testing Pressure
Testing Solution Temperature
Concentration of Testing Solution (NaCl)
pH value of Testing Solution
Recovery Rate of Single Element
150 psi (1.03Mpa)
25˚C
1500ppm
7.5
15%
Operation Limits &
Conditions
Max. Working Pressure
Max. Temperature of Feed water
Max. Volume of Feed water
Max. Feed water SDI15
pH Range of Feed water during Continuous Operation
pH Range of Feed Water during Chemical Cleaning
Residual Chlorine Concentration of Feed Water
Max. Pressure Drop of Single Membrane Element
Max. Pressure Drop of Single Pressure Vessel with Six RO Membranes
600psi（4.14Mpa）
45˚C
75gpm (173/h)
5
3~10
2~12
<0.1ppm
15psi (0.1Mpa)
50psi (034Mpa)
2d
Mbombela / Nelspruit
1
R 3,343.46
SavedSave
Please note that shipping and installation is not included.Vontron Reverse Osmosis Membrane ULP21-4040 series of ultra-low
pressure aromatic polyamide compound membrane element newly developed by
Vontron Technology Co. Ltd.
Membrane can operate under ultra low pressure to reach as high
permeate flow and salt rejection as regular low-pressure membrane
element can and is applicable to desalination of surface water and
underground water.
It operates under approximately 2 thirds of the operating pressure of
regular low-pressure composite membranes, and achieves a salt rejection
rate of up to 99.5%, which can decrease the investment costs for
relevant facilities such as pumps, piping and the operating cost for the
RO system, thus increasing the economic efficiency.
Being suitable for the desalting treatment of those water sources
with salt concentration lower than 2000 ppm, such as surface water,
underground water, tap water and municipal water, etc., ULP series
membrane elements are mainly applicable to numerous applications of
various scales, such as pure water, boiler water replenishment,
foodstuff processing, and pharmaceutical production, etc.
Vontron Reverse Osmosis Membrane ULP21-4040
The Vontron Membrane Range developed by Vontron Technology Co. Ltd.
has the properties of low-pressure operation, high permeate flow. With
excellent desalination and is applicable to the desalination of brackish
water. Besides, it is particularly applicable to the fabrication of
high-purity water for the electronic industry and electric power
industry. Owing to its excellent performance in removing soluble salts,
TOC, SiO2, etc.Being suitable for desalting such water sources as surface water,
underground water, tap water, and municipal water, etc., the Vontron
Membrane Range is mainly applicable to the treatment of various
industrial water such as industrial-purpose pure water, boiler water
replenishment in power plants, and can be also applied to such brackish
water applications, such as treatment of high-concentration saline
wastewater and production of beverage-purpose water.
2d
Mbombela / Nelspruit
1
R 4,567.85
SavedSave
Please note that shipping and installation is not included.Vontron Membranes
Vontron
Reverse Osmosis Membrane ULP21-4021 series of ultra-low pressure
aromatic polyamide compound membrane element newly developed by Vontron
Membrane Technology Co., Ltd. Can work under ultra low pressure to reach
as high permeate flow and rejection same as regular low-pressure
membrane element, and is applicable to desalination of surface water and
underground water. It operates under approximately two thirds of the
operating pressure of regular low-pressure composite membranes, which
can decrease the investment costs for such relevant facilities as pumps,
pipelines, and containers, etc. and the operating cost for the RO
system, thus increasing the economic efficiency.
Applicable to desalination treatment of those water sources with NaCl
lower than 2000 ppm, such as surface water, underground water, tap
water and municipal water, ULP series membrane elements are mainly
applicable to such as pure water, boiler water replenishment, foodstuff
processing, and pharmaceutical production.
Performance parameters of the Vontron Reverse Osmosis Membrane ULP21-4021
Model
Active Membrane
Area
ft2(m2)
Average Permeate
GPD(m3
/d)
Stable Rejection
Rate %
Min. Rejection
Rate %
LP22-4021
36（3.3）
950（3.6）
99
99.3
Testing
Conditions
Testing Pressure
Testing Solution Temperature
Concentration of Testing Solution (NaCl)
pH value of Testing Solution
Recovery Rate of Single Element
150 psi (1.03Mpa)
25˚C
1500ppm
7.5
15%
Operation Limits &
Conditions
Max. Working Pressure
Max. Temperature of Feed water
Max. Volume of Feed water
Max. Feed water SDI15
pH Range of Feed water during Continuous Operation
pH Range of Feed Water during Chemical Cleaning
Residual Chlorine Concentration of Feed Water
Max. Pressure Drop of Single Membrane Element
Max. Pressure Drop of Single Pressure Vessel with Six RO Membranes
600psi（4.14Mpa）
45˚C
75gpm (173/h)
5
3~10
2~12
<0.1ppm
15psi (0.1Mpa)
50psi (034Mpa)
2d
Mbombela / Nelspruit
1
R 6,966.38
SavedSave
Please note that shipping and installation is not included.Vontron reverse osmosis membrane SW21-4040
Model
Active Membrane Area m2
Average Permeated Flow GPD (m3/d)
Stable Rejection Rate (%)
Minimum Rejection Rate (%)
SW21-4040
7.9
1400 (5.3)
99.5
99.2
Conversions
1 US Gallon = 3.785 LitersGPD x 3.785 / 24 hours = Liters per hour
Testing Conditions:
Testing Pressure: 800 psi (5.5Mpa)Temperature of Testing Solution: 25 °CConcentration of Testing Solution (NaCl): 32800ppmpH Value of Testing Solution: 7.5Recovery Rate of Single Membrane Element:
8% (8040-size, 4040-size and 2540-size)4% (4021-size and 2521-size)
Operating Limits
Max. Working Pressure: 1000psi (6.9Mpa)Max. Feed water Flow:
7.5gpm (1 700l/h) (8040)1.6gpm (360l/h) (4040)0.14gpm (31l/h) (2521)
Max. Feed water Temperature: 45°CMax. Feed water SDI: 5Residual chlorine Concentration of Feed water: <0.1ppmpH Range of Feed water during Continuous Operation: 3~10pH Range of Feed water during Chemical Cleaning: 2~12Max. Pressure Drop of Single Membrane Element:
15psi (0.1Mpa) (8040, 4040 & 2540)10psi (0.07Mpa) (2521 & 4021)
Vontron reverse osmosis membrane SW21-4040. It
is mainly used for producing various scales of bottle water, drinking
water, industrial used pure water, high purity water, boiler
replenishment water, also for wastewater reuse, material concentration,
purification and refining purposes. The
4040 Brackish Water RO Membranes are meant for the desalination of
brackish (salty) water with high TDS / Mineral content. These membranes
are characterized by low-pressure operation, high water productivity,
and excellent desalting performance.
2d
Mbombela / Nelspruit
1
R 4,368.11
SavedSave
Please note that shipping and installation is not included.Vontron reverse osmosis membrane FR11-4040 utilizes specialized
manufacture technique that can improve the hydrophilicity, electric
charge and roughness of its surface, thus reducing the breeding and
adsorption of pollutants and microbes on membrane surface. Pure water
production from surface water, for example: lake water, river water,
etc. Desalination of Reclaimed water, for example: Reclaimed water,
industrial wastewater, RO concentrated water, etc.
Operating pressure: 225 psi (1.55 MPa)Operating Temperature: 25℃Minimum salt rejection: 99.3%Performance parameters of the Vontron reverse osmosis membrane FR11-4040
Model
Stable Rejection Rate%
Permeate Flow GPD(m3/d)
Active Membrane Area ft2(m2)
Feed Spacer Thickness mil
FR11-4040
99,5
2200 (8,3)
90(8.4)
34
Operating Conditions & Limits
Maximum operating pressure psi(MPa)
600(4,14)
Maximum feed water temperature ℃
45
Maximum inlet flow rate m3/h
3,6
Maximum concentration of free chlorine mg/L
0,1
Maximum pressure drop per element psi(MPa)
15(0,1)
Allowed pH range for feed water in operation
2-11
Allowed pH range for chemical cleaning
1-13
Maximum feed water flow SDI15
5
2d
Mbombela / Nelspruit
1
R 1,106.62
SavedSave
Please note that shipping and installation is not included.TESTING CONDITIONS:
Testing Pressure ………………………………… 100 psi (0.41MPa)The temperature of Testing Solution ……………….. 25℃The concentration of Testing Solution (NaCl) ……… 500 ppmThe pH of Testing Solution ………………………….. 6.5~8.5Recovery of Single Element……………………. 15%
Parameters Of A Domestic Reverse Osmosis Membrane
250 TDS Filtered (5µ), De-Chlorinated, Municipal Feed Water, 77˚F,
40% Permeate Recovery, 6.5-7.0 pH Range, at the Specified Operating
Pressure.Data Taken After 30 Minutes of Operation.Maximum Pressure Drop for Each Element is 10psi.Minimum Salt Rejection is 96%.
Firstly Permeate Flow for Individual Elements may vary ± 20%.
While in storage, membrane elements must be kept sealed and moist.
Consequently drying out may occur and damage the membrane permanently.
Unless you must prevent elements from freezing or being exposed to
direct sunlight. We tested elements are vacuum-sealed in a polyethylene
oxygen barrier bag containing. Vontron RO Membrane 3012 300 GPD Preservative and then packaged in a cardboard box.
Discard the permeate for the first twenty-four hours of operation. Do
not use the first full tank of permeate for drinking or food
preparation. The permeate flow (product water flow) varies with feed
water temperature. Review a Temperature Correction Chart. For membrane
warranty information, please contact the manufacturer.
Important Operation Notes:
When someone uses this product for the first time. Discard water
obtained from the first hour of use, as it should permeate instead.While keep elements moist at all times after initial wetting.If operating limits and guidelines given in this Product Information
Bulletin are not strictly followed, the Limited Warranty will be null
and void.To prevent biological growth during prolonged system shutdowns, it
is recommended that membrane elements be immersed in a preservative
solution. Rinse out the preservative before use.The OEM is fully responsible for the effects of incompatible
chemicals and lubricants on elements. The use of any such chemicals or
lubricants will void the Limited Warranty.
2d
Mbombela / Nelspruit
1
R 260.82
SavedSave
Please note that shipping and installation is not included.Specifications and Major Properties
Active Membrane Area ft²(m²): 3.5(0.32)
Average Permeated Flow: 75 GPD
Stable Rejection Rate: 97.5%
Minimum Rejection Rate: 96.0%
Testing Conditions:
Testing Pressure 60 psi (0.41Mpa)
Temperature of Testing Solution 25°C
Concentration of Testing Solution (NaCl) 250ppm
pH Value of Testing Solution 7.5
Recovery Rate of Single Membrane Element 15%
Extreme Operation Conditions:
Max. Working Pressure: 300psi(2.07Mpa)
Max. Feed water Temperature: 45°C
Max. Feed water SDI: 5
Free Chlorine Concentration of Feed water <0.1ppm
pH Range of Feed water during Continuous Operation: 3~10
pH Range of Feed water during Chemical Cleaning: 2~12
Max. Pressure Drop of Single Membrane Element: 10psi(0.07Mpa)
Vontron Membrane 1812 75 GPD
The Vontron Membrane Range developed by Vontron Technology Co. Ltd.
has the properties of low-pressure operation, high permeate flow. With
excellent desalination and is applicable to the desalination of brackish
water. Besides, it is particularly applicable to the fabrication of
high-purity water for the electronic industry and electric power
industry. Owing to its excellent performance in removing soluble salts,
TOC, SiO2, etc.Being suitable for desalting such water sources as surface water,
underground water, tap water, and municipal water, etc., the Vontron
Membrane Range is mainly applicable to the treatment of various
industrial water such as industrial-purpose pure water, boiler water
replenishment in power plants, and can be also applied to such brackish
water applications, such as treatment of high-concentration saline
wastewater and production of beverage-purpose water.
2d
Mbombela / Nelspruit
1
R 242.19
SavedSave
Please note that shipping and installation is not included.Specifications and Major Properties of the 1812 50 GPD Vontron Membrane:
Active Membrane Area ft²(m²): 3.5(0.32)
Average Permeated Flow: 50 GPD
Stable Rejection Rate: 97.5%
Minimum Rejection Rate: 96.0%
Testing Conditions:
Testing Pressure 60 psi (0.41Mpa)
Temperature of Testing Solution 25°C
Concentration of Testing Solution (NaCl) 250ppm
pH Value of Testing Solution 7.5
Recovery Rate of Single Membrane Element 15%
Extreme Operation Conditions:
Max. Working Pressure: 300psi(2.07Mpa)
Max. Feed water Temperature: 45°C
Max. Feed water SDI: 5
Free Chlorine Concentration of Feed water <0.1ppm
pH Range of Feed water during Continuous Operation: 3~10
pH Range of Feed water during Chemical Cleaning: 2~12
Max. Pressure Drop of Single Membrane Element: 10psi(0.07Mpa)
The Vontron Membrane Range developed by Vontron Technology Co. Ltd.
has the properties of low-pressure operation, high permeate flow. With
excellent desalination and is applicable to the desalination of brackish
water. Besides, it is particularly applicable to the fabrication of
high-purity water for the electronic industry and electric power
industry. Owing to its excellent performance in removing soluble salts,
TOC, SiO2, etc.Being suitable for desalting such water sources as surface water,
underground water, tap water, and municipal water, etc., the Vontron
Membrane Range is mainly applicable to the treatment of various
industrial water such as industrial-purpose pure water, boiler water
replenishment in power plants, and can be also applied to such brackish
water applications, such as treatment of high-concentration saline
wastewater and production of beverage-purpose water. 1812 50 GPD Vontron
Membrane.
2d
Mbombela / Nelspruit
1
R 3,343.46
SavedSave
Please note that shipping and installation is not included.Vontron reverse osmosis membrane LP21-4040 is primarily used in
desalination of brackish water. This series features low operating
pressure, high permeate flow and rejection. It has high performance in
rejecting soluble salt, TOC and SiO2, and can be widely applied in pure
water production in electricity and electronic industries. Drinking
water production, such as: packaged water, direct drinking water, food
processing water, etc. Purified water production, such as:
pharmaceutical water, medical water, electronics water, etc.
Performance parameters of the Vontron reverse osmosis membrane LP21-4040
Model
Stable Rejection Rate%
Permeate Flow GPD(m3/d)
Active Membrane Area ft2(m2)
Feed Spacer Thickness mil
LP21-4040
99,6
2800 (10,6)
100(9,3)
28
Operating Conditions & Limits
Maximum operating pressure psi (MPa)
600(4,14)
Maximum feed water temperature ℃
45
Maximum inlet flow rate m3/h
17
Maximum concentration of free chlorine mg/L
0,1
Maximum pressure drop per element psi (MPa)
15(0,1)
Allowed pH range for feed water in operation
2-11
Allowed pH range for chemical cleaning
1-13
Maximum feed water flow SDI15
5
2d
Mbombela / Nelspruit
1
R 11,164.34
SavedSave
Please note that shipping and installation is not included.Firstly Vontron reverse osmosis membrane LP22-8040 ultra-low pressure
aromatic poly-amide compound membrane element. Newly developed by
Vontron Membrane Technology Co.Ltd. as the properties of low-pressure
operation, high permeate flow and excellent desalination and is
applicable to desalination of brackish water.
Besides, it is particularly applicable to fabrication of high-purity
water for electronic industry and electric power industry owing to its
excellent performance in removing soluble salts, TOC, SiO2, etc.
Applicable to desalination treatment of those water sources with NaCl
lower than 2000 ppm, such as surface water, underground water, tap
water and municipal water.
Being suitable for desalting such water sources as surface water
(NaCl ≤10000ppm), underground water, tap water and municipal water,
etc., LP series is mainly applicable to treatment of various industrial
water such as industrial-purpose pure water, boiler water replenishment
in power plants, and can be also applied to such brackish water
applications, such as treatment of high-concentration saline waste water
and production of beverage-purpose water.
Model
Active Membrane
Area
ft2(m2)
Average Permeate
GPD(m3
/d)
Stable Rejection
Rate %
Min. Rejection
Rate %
LP22-8040
400（37.2）
10500（39.7）
99.5
99.3
Testing
Conditions
Testing Pressure
Testing Solution Temperature
Concentration of Testing Solution (NaCl)
pH value of Testing Solution
Recovery Rate of Single Element
225 psi (1.55Mpa)
25˚C
2000ppm
7.5
15%
Operation Limits &
Conditions
Max. Working Pressure
Max. Temperature of Feed water
Max. Volume of Feed water
Max. Feed water SDI15
pH Range of Feed water during Continuous Operation
pH Range of Feed Water during Chemical Cleaning
Residual Chlorine Concentration of Feed Water
Max. Pressure Drop of Single Membrane Element
Max. Pressure Drop of Single Pressure Vessel with Six RO Membranes
600psi（4.14Mpa）
45˚C
75gpm (173/h)
5
2~11
1~13
<0.1ppm
15psi (0.1Mpa)
50psi (034Mpa)
Model
Active Membrane
Area
ft2(m2)
Average Permeate
GPD(m3
/d)
Stable Rejection
Rate %
Min. Rejection
Rate %
ULP22-8040
400（37.2）
12100（45.7）
99.0
98.5
Testing
Conditions
Testing Pressure
Testing Solution Temperature
Concentration of Testing Solution (NaCl)
pH value of Testing Solution
Recovery Rate of Single Element
150 psi (1.55Mpa)
25˚C
1500ppm
7.5
15%
Operation Limits &
Conditions
Max. Working Pressure
Max. Temperature of Feed water
Max. Volume of Feed water
Max. Feed water SDI15
pH Range of Feed water during Continuous Operation
pH Range of Feed Water during Chemical Cleaning
Residual Chlorine Concentration of Feed Water
Max. Pressure Drop of Single Membrane Element
Max. Pressure Drop of Single Pressure Vessel with Six RO Membranes
600psi（4.14Mpa）
45˚C
75gpm (173/h)
5
3~10
2~12
<0.1ppm
15psi (0.1Mpa)
50psi (034Mpa)
2d
Mbombela / Nelspruit
1
R 6,088.28
SavedSave
Please note that shipping and installation is not included.First thing to remember is that the membrane
housing First Line 4040 x 4 elements FRP – opposite side port is
designed for continuous, long-term use in reverse osmosis and ultra
filtration applications. In industrial and commercial water treatment
systems at a pressure of 300 PSI.The permissible working range is 10 ℃ to 49℃. The pressure of the membrane housing penetration test is 1.5 times the standard pressure.
PRODUCT BENEFIT
100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 160″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultra filtration, & Nano filtration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranes
Membrane housing First Line 4040 x 3 elements FRP – opposite side port
4″ FRP membrane housing
Material: FRP
End cap material: ABS
Max. working pressure: 300psi, 450psi, 600psi, 800psi,1000psi
Inlet port: 3/4″
Outlet port: 1/2″
So, the membrane housing 4040 FRP is a pressure vessel. In effect
which is used for loading membrane elements in a RO water treatment
system. The material of the membrane housing is divided into three
types, such as FRP, stainless steel, and PVC.Membrane housing is relatively standard across the industry, it is
made with high-quality components and o-rings, which is the perfect
option for building your RO/DI system or replacing worn-out membrane
housing. The membrane pressure vessels or membrane housings of Ro Aqua can
achieve a variety of sizes, cover styles, pressure levels, and side or
end inlet designs.
2d
Mbombela / Nelspruit
1
R 4,467.47
SavedSave
Please note that shipping and installation is not included.First thing to remember is that the membrane
housing First Line 4040 x 2 elements FRP – opposite side port is
designed for continuous, long-term use in reverse osmosis and ultra
filtration applications. In industrial and commercial water treatment
systems at a pressure of 300 PSI.The permissible working range is 10 ℃ to 49℃. The pressure of the membrane housing penetration test is 1.5 times the standard pressure.
PRODUCT BENEFIT
100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultra filtration, & Nano filtration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″
Membrane housing First Line 4040 x 3 elements FRP – opposite side port
4″ FRP membrane housing
Material: FRP
End cap material: ABS
Max. working pressure: 300psi, 450psi, 600psi, 800psi,1000psi
Inlet port: 3/4″
Outlet port: 1/2″
So, the membrane housing 4040 FRP is a pressure vessel. In effect
which is used for loading membrane elements in a RO water treatment
system. The material of the membrane housing is divided into three
types, such as FRP, stainless steel, and PVC.Membrane housing is relatively standard across the industry, it is
made with high-quality components and o-rings, which is the perfect
option for building your RO/DI system or replacing worn-out membrane
housing. The membrane pressure vessels or membrane housings of Ro Aqua can
achieve a variety of sizes, cover styles, pressure levels, and side or
end inlet designs.
2d
Mbombela / Nelspruit
1
R 4,828.90
SavedSave
Please note that shipping and installation is not included.First thing to remember is that the membrane
housing First Line 4040 x 3 elements FRP – 3 side port is designed for
continuous, long-term use in reverse osmosis and ultra filtration
applications. In industrial and commercial water treatment systems at a
pressure of 300 PSI.The permissible working range is 10 ℃ to 49℃. The pressure of the membrane housing penetration test is 1.5 times the standard pressure.
PRODUCT BENEFIT
100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultra filtration, & Nano filtration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″
Membrane housing First Line 4040 x 3 elements FRP – 3 side port
4″ FRP membrane housing
Material: FRP
End cap material: ABS
Max. working pressure: 300psi, 450psi, 600psi, 800psi,1000psi
Inlet port: 3/4″
Outlet port: 1/2″
So, the membrane housing 4040 FRP is a pressure vessel. In effect
which is used for loading membrane elements in a RO water treatment
system. The material of the membrane housing is divided into three
types, such as FRP, stainless steel, and PVC.Membrane housing is relatively standard across the industry, it is
made with high-quality components and o-rings, which is the perfect
option for building your RO/DI system or replacing worn-out membrane
housing. The membrane pressure vessels or membrane housings of Ro Aqua can
achieve a variety of sizes, cover styles, pressure levels, and side or
end inlet designs.
2d
Mbombela / Nelspruit
1
R 3,195.67
SavedSave
Please note that shipping and installation is not included.PRODUCT DESCRIPTION
First thing to remember is that the Membrane housing First Line 4040 x
2 elements FRP – same side port is designed for continuous, long-term
use in reverse osmosis and ultra filtration applications. In industrial
and commercial water treatment systems at a pressure of 300 PSI.
The permissible working range is 10 ℃ to 49℃.
The pressure of the membrane housing penetration test is 1.5 times the standard pressure.
PRODUCT BENEFIT
100,000 cycles.Blast test at 6 times working pressure.Perform 100% quality inspection and cleaning prior to final packaging and delivery to the customerCompetitive PriceHeavy Duty Industrial Grade Fiberglass (FRP) 4″ x 40″ Membrane Pressure Vessel Housing Will not rust.Fits all standard 4040 membranes.RO UF & NF (Reverse Osmosis, Ultrafiltration, & Nanofiltration)300 psi3/4″ Feed and Drain Ports (FNPT)1/2″ Permeate Ports (FNPT) O-ring End Port Caps Included.Stainless Clamps, and Stainless Hardware Included.Brackets Included.Fits all 4″ x 40″ membranesOverall Size of product is 46″ tall x 5″ diameterSpecifically The Shipping Dimensions are 47″ x 6″ x 6″
Membrane housing First Line 4040 x 2 elements FRP – same side port
4″ FRP membrane housing
Material: FRP
End cap material: ABS
Max. working pressure: 300psi, 450psi, 600psi, 800psi,1000psi
Inlet port: 3/4″
Outlet port: 1/2″
So, the membrane housing 4040 FRP is a pressure vessel. In effect
which is used for loading membrane elements in a RO water treatment
system. The material of the membrane housing is divided into three
types, such as FRP, stainless steel, and PVC.
Membrane housing is relatively standard across the industry, it is
made with high-quality components and o-rings, which is the perfect
option for building your RO/DI system or replacing worn-out membrane
housing.
The membrane pressure vessels or membrane housings of Ro Agua can
achieve a variety of sizes, cover styles, pressure levels, and side or
end inlet designs.
3d
Mbombela / NelspruitSave this search and get notified
when new items are posted!