Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Home & Garden
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Results for motor for in "motor for" in Home Appliances in South Africa in South Africa
1
R 28,495
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 0.7kW single phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 0.7kW single phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 \ ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pumpPump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.
Construction features of the motorSingle-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.
2h
Mbombela / Nelspruit
1
R 11,779
SavedSave
Please note that shipping and installation is not included.Firstly Stainless steel Feka vs submersible pumps 1kW – single phase with micro cast steel liquid vortex impeller, suitable for lifting sewage and drain water in general containing solid matter with size up to 50 mm.
Construction Features Of The Pump
AISI 304 stainless steel pump body, seal cover, motor cover, and cap with handle insulating rubber coated. Micro cast steel impeller. Insulating rubber covered handle. AISI 316 stainless steel motor shaft. Double mechanical seal with interposed oil chamber (non-toxic oil) in carbon-alumina on the motor side, and silicon carbide/silicon carbide on the pump side.Mechanical seal: Silicon Carbide
Construction Features Of The Motor
Dry, asynchronous and waterproof motor, cooled by the pumped liquid. Rotor running on permanently lubricated ball bearings, selected to ensure low noise and durability. Over current protection as standard for the single-phase version, optional for the three-phase version. Permanently connected capacitor in the single-phase version.
Continuous duty with liquid temperature 35 °C and completely submerged pump. The single-phase version can be supplied with float for automatic operation. Mechanical seal: Carbon/Alumina.DAB Feka vs submersible pumps 1kW – single phase Number of poles: 2 Max starts/hour: 20Operating range: From 0 to 32 m3/h with head up to 14 meters.Pumped liquid: Sewage water and used water in general, non aggressive.Free passage: 50 mm.Liquid temperature range: From 0 °C to +35 °C for domestic use (EN 60335-2-41). From 0 °C to +50 °C for other uses.Maximum ambient temperature for operation with motor above water: +40 °CMaximum immersion depth: 7 meters.Motor protection class: IP 68Insulation class: FPower Inputs: 1 x 220 V -240 V – 50Hz single phaseInstallation: Fixed or portable, vertical positionPower Cable: 10 meter H07RN-F, with plug for the single phase version.Input Voltage A: 6.63Output Voltage A: 31HP: 1.36
2h
Mbombela / Nelspruit
7
R 4,000
NEGOTIABLE
SavedSave
3 motor industrial vacuum cleanerStill in good conditionR3700 EACHCan be used for business or car wash
3d
Johannesburg South
1
R 27,226
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 0.7kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 0.7kW three phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C.Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase: versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.
3h
Mbombela / Nelspruit
1
R 36,071
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 2.2kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 2.2kW three phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.
3h
Mbombela / Nelspruit
1
R 32,907
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.5kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports.Technical Data of the DAB grinder FX submersible pump 1.5kW three phaseFlow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.
3h
Mbombela / Nelspruit
1
R 6,060
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 0.75kW – single phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.CONSTRUCTION FEATURES OF THE PUMPPump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTORClosed asynchronous type, external ventilation cooling.Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.DAB centrifugal double impeller K pump 0.75kW – single phaseMaximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 220 V -240 VCONSTRUCTION FEATURES OF THE PUMP
Inlet: 1″Outlet: 1″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
6d
Mbombela / Nelspruit
1
R 8,352
SavedSave
Please note that shipping and installation is not includedFirstly Stainless steel DAB Feka vs submersible pumps 0.55kW – three phase with micro cast steel liquid vortex impeller, suitable for lifting sewage and drain water in general containing solid matter with size up to 50 mm.
Construction Features Of The Pump
AISI 304 stainless steel pump body, seal cover, motor cover, and cap with handle insulating rubber coated. Micro cast steel impeller. Insulating rubber covered handle. AISI 316 stainless steel motor shaft. Double mechanical seal with interposed oil chamber (non-toxic oil) in carbon-alumina on the motor side, and silicon carbide/silicon carbide on the pump side. Mechanical seal: Silicon Carbide
Construction Features Of The Motor
Dry, asynchronous and waterproof motor, cooled by the pumped liquid. Rotor running on permanently lubricated ball bearings, selected to ensure low noise and durability. Over current protection as standard for the single-phase version, optional for the three-phase version. Permanently connected capacitor in the single-phase version.
Continuous duty with liquid temperature 35 °C and completely submerged pump. The single-phase version can be supplied with float for automatic operation. Mechanical seal: Carbon/AluminaDAB Feka vs submersible pumps 0.55kW – three phase Number of poles: 2 Max starts/hour: 20Operating range: From 0 to 32 m3/h with head up to 14 meters.Pumped liquid: Sewage water and used water in general, non aggressive.Free passage: 50 mm.Liquid temperature range: From 0 °C to +35 °C for domestic use (EN 60335-2-41). From 0 °C to +50 °C for other uses.Maximum ambient temperature for operation with motor above water: +40 °CMaximum immersion depth: 7 meters.Motor protection class: IP 68Insulation class: FPower Inputs: 3 x 400 V ~Installation: Fixed or portable, vertical positionPower Cable: 10 meter H07RN-F, with plug for the single phase version.Input Voltage A: 1.64Output Voltage A: 11HP: 0.75
2h
Mbombela / Nelspruit
1
R 7,880
SavedSave
Please note that shipping and installation is not included.Firstly Stainless steel DAB Feka vs submersible pumps 0.55kW – single phase with micro cast steel liquid vortex impeller, suitable for lifting sewage and drain water in general containing solid matter with size up to 50 mm.
Construction Features Of The Pump
AISI 304 stainless steel pump body, seal cover, motor cover, and cap with handle insulating rubber coated. Micro cast steel impeller. Insulating rubber covered handle. AISI 316 stainless steel motor shaft. Double mechanical seal with interposed oil chamber (non-toxic oil) in carbon-alumina on the motor side, and silicon carbide/silicon carbide on the pump side. Mechanical seal: Silicon Carbide
Construction Features Of The Motor
Dry, asynchronous and waterproof motor, cooled by the pumped liquid. Rotor running on permanently lubricated ball bearings, selected to ensure low noise and durability. Over current protection as standard for the single-phase version, optional for the three-phase version. Permanently connected capacitor in the single-phase version.Continuous duty with liquid temperature 35 °C and completely submerged pump. The single-phase version can be supplied with float for automatic operation. Mechanical seal: Carbon/AluminaDAB Feka vs submersible pumps 0.55kW – single phase Number of poles: 2 Max starts/hour: 20
Operating range: From 0 to 32 m3/h with head up to 14 meters.Pumped liquid: Sewage water and used water in general, non aggressive.Free passage: 50 mm.Liquid temperature range: From 0 °C to +35 °C for domestic use (EN 60335-2-41). From 0 °C to +50 °C for other uses.Maximum ambient temperature for operation with motor above water: +40 °CMaximum immersion depth: 7 meters.Motor protection class: IP 68Insulation class: FPower Inputs: 1 x 220 V -240 V – 50Hz single phaseInstallation: Fixed or portable, vertical positionPower Cable: 10 meter H07RN-F, with plug for the single phase version.Input Voltage A: 4.2Output Voltage A: 20HP: 0.75
1h
Mbombela / Nelspruit
1
R 12,909
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 1.8kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 1.8kW – three phaseMaximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″Outlet: 1″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
7d
Mbombela / Nelspruit
3
R 500
NEGOTIABLE
SavedSave
new samsung eco boost frontloader motor
8d
Other
1
R 4,244
SavedSave
Please note that shipping and installation is not included.DAB Centrifugal Single impeller K pump 0.37kW – three phase centrifugal pump suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB Centrifugal Single impeller K pump 0.37kW – three phase
Maximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1″Outlet: 1″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
8d
Mbombela / Nelspruit
1
R 15,879
SavedSave
Please note that shipping and installation is not included. DAB centrifugal single impeller K pump 2.2kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 2.2kW – three phaseMaximum operating pressure: 8 bar (800 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2.1/2″Outlet: 2″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
8d
Mbombela / Nelspruit
1
R 16,971
SavedSave
Please note that shipping and installation is not included.DAB Centrifugal single impeller K pump 4kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB Centrifugal single impeller K pump 4kW – three phaseMaximum operating pressure: 8 bar (800 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.Installation: Horizontal or vertical position, provided that the motor is always above the pump. Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2″Outlet: 2″
Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
8d
Mbombela / Nelspruit
1
R 46,547
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 9.2kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 9.2kW – three phase
Maximum operating pressure: 8 bar (800 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.
Standard voltage:Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2.1/2″Outlet: 2″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
8d
Mbombela / Nelspruit
1
R 9,393
SavedSave
Please note that shipping and installation is not included.DAB Centrifugal single impeller K pump 1.8kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB Centrifugal single impeller K pump 1.8kW – three phaseMaximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.
Standard voltage:
Three-phase 230-400 V / 50 Hz up to 4 kW included – 400 V ∆ 50 Hz from 5,5 kWCONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″Outlet: 1″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
8d
Mbombela / Nelspruit
1
R 18,788
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 2.2kW – single phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller. As can been seen on data sheetCarbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.DAB centrifugal double impeller K pump 2.2kW – single phaseMaximum operating pressure: 10 bar (1000 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.
Standard voltage: Three-phase 220-240 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″
Outlet: 1″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
7d
Mbombela / Nelspruit
1
R 7,576
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 0.75kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 0.75kW – three phase.Maximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.
Standard voltage: Three-phase 230 V -400 V
CONSTRUCTION FEATURES OF THE PUMPInlet: 1″Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
7d
Mbombela / Nelspruit
1
R 9,273
SavedSave
Please note that shipping and installation is not included.DAB Centrifugal double impeller K pump 1.1kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller. As can been seen on data sheetCarbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB Centrifugal double impeller K pump 1.1kW – three phaseMaximum operating pressure: 8 bar (800 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMPInlet: 1.1/4″Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
7d
Mbombela / Nelspruit
1
R 9,393
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 1.1kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller. As can been seen on data sheetCarbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 1.1kW – three phaseMaximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.
Standard voltage: Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″Outlet: 1″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
7d
Mbombela / NelspruitSave this search and get notified
when new items are posted!