Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Home & Garden
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Suggested
Results for motor for in "motor for" in Home & Garden Supplies in South Africa in South Africa
4
R 2,700
NEGOTIABLE
SavedSave
Tired of Centurion gate motors being stolen? Get a New Nice drive500 gate motoer for only r2700.Contact 0747 565 660
11d
Edenvale3
R 6,500
SavedSave
We do supply and install all types of gates motors and all garage doors openers around Cape Town and all areas beyond Cape Town at affordable prices
Et nice drive 300
Et nice drive 500
Et nice drive 600
Et nice drive 1000 industrial gates motors
All garage doors motors
Centurion D5 Evo
Centurion D5 smart
Centurion D10 smart
Centurion swing gates motors
Intercom systems installation
Electric locks installations
Gates motors repairs
Gates motors services
Reprogramming of motors
Extra remotes
Contact Theo for quotations
Call or whatsapp
0751955598
3d
CrawfordPay & Ship
2
Contact f/price
SavedSave
We service and repair and do long term maintenace on all Centurion motors for the last 12 years D5 Evo and D10 we also do all Smart motors and garage door motors give us a call and have your motor back in 48 hours
6d
Germiston1
R 5,399
SavedSave
This week we will be selling Centurion D5 Evo Smart motors for only R5399 excl vat what you get is the motor 2 x four button remotes and 1 x 7.2ah battery order your motor today call 0815397879
2d
Germiston1
R 2,200
SavedSave
Motor is in very good working condition its been reckoned and fully serviced
I can do installation also
6h
Eastern Pretoria2
Negotiable
SavedSave
2 x sectional single garage doors with motor R4500 neg
1d
Kenwyn1
R 28,495
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 0.7kW single phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 0.7kW single phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 \ ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pumpPump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.
Construction features of the motorSingle-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.
1d
Mbombela / Nelspruit1
R 30,389
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.1kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 1.1kW three phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C.Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase: versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.
1d
Mbombela / Nelspruit7
R 4,000
NEGOTIABLE
SavedSave
3 motor industrial vacuum cleanerStill in good conditionR3700 EACHCan be used for business or car wash
4d
Johannesburg South1
R 27,226
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 0.7kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 0.7kW three phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C.Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase: versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.
1d
Mbombela / Nelspruit1
R 36,071
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 2.2kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 2.2kW three phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.
1d
Mbombela / Nelspruit1
R 4,000
NEGOTIABLE
SavedSave
Brand new Centurion Vantage size 500 swing gate motor bought in error and not returnable. Still packaged in box.
4d
Claremont & Newlands1
R 11,779
SavedSave
Please note that shipping and installation is not included.Firstly Stainless steel Feka vs submersible pumps 1kW – single phase with micro cast steel liquid vortex impeller, suitable for lifting sewage and drain water in general containing solid matter with size up to 50 mm.
Construction Features Of The Pump
AISI 304 stainless steel pump body, seal cover, motor cover, and cap with handle insulating rubber coated. Micro cast steel impeller. Insulating rubber covered handle. AISI 316 stainless steel motor shaft. Double mechanical seal with interposed oil chamber (non-toxic oil) in carbon-alumina on the motor side, and silicon carbide/silicon carbide on the pump side.Mechanical seal: Silicon Carbide
Construction Features Of The Motor
Dry, asynchronous and waterproof motor, cooled by the pumped liquid. Rotor running on permanently lubricated ball bearings, selected to ensure low noise and durability. Over current protection as standard for the single-phase version, optional for the three-phase version. Permanently connected capacitor in the single-phase version.
Continuous duty with liquid temperature 35 °C and completely submerged pump. The single-phase version can be supplied with float for automatic operation. Mechanical seal: Carbon/Alumina.DAB Feka vs submersible pumps 1kW – single phase Number of poles: 2 Max starts/hour: 20Operating range: From 0 to 32 m3/h with head up to 14 meters.Pumped liquid: Sewage water and used water in general, non aggressive.Free passage: 50 mm.Liquid temperature range: From 0 °C to +35 °C for domestic use (EN 60335-2-41). From 0 °C to +50 °C for other uses.Maximum ambient temperature for operation with motor above water: +40 °CMaximum immersion depth: 7 meters.Motor protection class: IP 68Insulation class: FPower Inputs: 1 x 220 V -240 V – 50Hz single phaseInstallation: Fixed or portable, vertical positionPower Cable: 10 meter H07RN-F, with plug for the single phase version.Input Voltage A: 6.63Output Voltage A: 31HP: 1.36
1d
Mbombela / Nelspruit1
R 2,500
NEGOTIABLE
SavedSave
New Centurion D5-Evo Smart motor for sale . New not used includes battery.
4d
Clare Hills3
R 12,000
NEGOTIABLE
SavedSave
Teco 3-Phase Induction Motor 15Hp with Telemecanique Star Delta Starter - Used Reference Willem Van Heerden
2d
VERIFIED
1
R 31,659.01
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.1kW single phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 1.1kW single phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.
Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed.Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.
1d
Mbombela / Nelspruit1
R 34,823
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.5kW single phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in
AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports.
Technical Data of the DAB grinder FX submersible pump 1.5kW single phase
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.
Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes.Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions with float for automatic operation. In the three-phase motors the
over-temperature sensor connection is responsibility of the user.
1d
Mbombela / Nelspruit1
R 8,352
SavedSave
Please note that shipping and installation is not includedFirstly Stainless steel DAB Feka vs submersible pumps 0.55kW – three phase with micro cast steel liquid vortex impeller, suitable for lifting sewage and drain water in general containing solid matter with size up to 50 mm.
Construction Features Of The Pump
AISI 304 stainless steel pump body, seal cover, motor cover, and cap with handle insulating rubber coated. Micro cast steel impeller. Insulating rubber covered handle. AISI 316 stainless steel motor shaft. Double mechanical seal with interposed oil chamber (non-toxic oil) in carbon-alumina on the motor side, and silicon carbide/silicon carbide on the pump side. Mechanical seal: Silicon Carbide
Construction Features Of The Motor
Dry, asynchronous and waterproof motor, cooled by the pumped liquid. Rotor running on permanently lubricated ball bearings, selected to ensure low noise and durability. Over current protection as standard for the single-phase version, optional for the three-phase version. Permanently connected capacitor in the single-phase version.
Continuous duty with liquid temperature 35 °C and completely submerged pump. The single-phase version can be supplied with float for automatic operation. Mechanical seal: Carbon/AluminaDAB Feka vs submersible pumps 0.55kW – three phase Number of poles: 2 Max starts/hour: 20Operating range: From 0 to 32 m3/h with head up to 14 meters.Pumped liquid: Sewage water and used water in general, non aggressive.Free passage: 50 mm.Liquid temperature range: From 0 °C to +35 °C for domestic use (EN 60335-2-41). From 0 °C to +50 °C for other uses.Maximum ambient temperature for operation with motor above water: +40 °CMaximum immersion depth: 7 meters.Motor protection class: IP 68Insulation class: FPower Inputs: 3 x 400 V ~Installation: Fixed or portable, vertical positionPower Cable: 10 meter H07RN-F, with plug for the single phase version.Input Voltage A: 1.64Output Voltage A: 11HP: 0.75
1d
Mbombela / Nelspruit1
R 32,907
SavedSave
Please note that shipping and installation is not included.DAB grinder FX submersible pump 1.5kW three phase with a shredder designed for lifting and transferring wastewater in civil and commercial environments. Grinder FX is certified EN 12050-1.
The presence of the shredder makes the pump suitable for systems with small diameter pipes or those requiring high pressures. Shredder in AISI 630 stainless steel. Ideal pump for replacements thanks to its reduced dimensions and to both flanged and threaded delivery ports.Technical Data of the DAB grinder FX submersible pump 1.5kW three phaseFlow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil wasteSupported liquid temperature (maximum and minimum): + 50°C (+ 60°C for short period of time)Flanged and threaded: from 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
Construction features of the pump: Pump body and impeller in cast iron, shredder in AISI 630. Motor shaft in AISI 304 stainless steel. Double mechanical seal in SiC-SiC/SiC-C in oil chamber not in contact with the pumped liquid, independent of the direction of rotation. Delivery port both flanged and threaded.Construction features of the motor: Single-phase asynchronous motor (MA / MNA versions) and three-phase version motor (TNA versions). The rotor is mounted on lubricated bearings. Continuous operation in S1 with the motor completely immersed. Dry running for a maximum time of 10 minutes. Over-temperature sensors in the motor windings with intervention threshold at +130°C. Quick-bonded resin-bonded cable gland, 07RN8-F power cable. Single-phase versions with starter and capacitor in a separate panel, MA versions
with float for automatic operation. In the three-phase motors the over-temperature sensor connection is responsibility of the user.
1d
Mbombela / Nelspruit2
Contact f/price
SavedSave
Passap E3000 knitting machine motor in working order. R1500 excl delivery
7d
HowickSave this search and get notified
when new items are posted!
