Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Home & Garden
Pay OnlineSECURELYEASY DELIVERY OR COLLECTION
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Available for meet-up collection
Pay securely, collect from seller
Pay for this item securely on Gumtree. We have multiple easy ways to pay and hold your money safely with us until you've collected your item from seller.
Learn more
Available for nation-wide delivery
Nationwide delivery
Have your item delivered to your nearest convenient Pargo pick-up point when buying online with Pay Online Securely.
Learn more
Filter & refine
Clear All
Results for Home Appliances in Dullstroom in Dullstroom
3
Contact f/price
SavedSave
这款强力管道疏通机适用于专业和家庭使用。这款800瓦的机器配备强劲电机，可使螺旋钻以每分钟600转的速度顺时针和逆时针旋转。三档开关可控制螺旋钻的旋转方向或停止旋转。https://xtototools.com/handheld-drain-snake/
2mo
DullstroomAds in other locations
1
R 101.75
SavedSave
Please note that shipping and installation is not included.Bottom Distributor for a 13″ to 16″ tank – 2.5″ mountThe top and bottom strainers are uses:
Firstly in cleaning systems, Bottom Distributor for a 13″ to 16″ tank – 2.5″ mount . The upper ones protect the control valve from being clogged by particles of a granular load. The lower ones evenly distribute the flow of water leaving the lifting tube in different directions. Also collect the already filtered water and send it back to the lifting tube.Water distributor is generally installed inside FRP tanks. Including softening water tanks, quartz sand filters and activated carbon filters, and plays the role of distributing water evenly. Lowering flow rate and impact and preventing filter material leakage.It is generally made of PP, ABS, PVC and features simple structure. Easy operation, easy to install and remove, low energy consumption, small footprint and long lifespan. It is often used in pre filtration systems, softened water treatment equipment, filter tanks or mixing tanks.Bottom Distributor for a 13″ to 16″ tank – 2.5″ mount might vary in shape, size, diameter and other characteristics that are tailored to the specific requirements of the water treatment system. However, in general, the switch gear is a compact piece made from durable, impact-resistant plastic. In the walls of the distributor housing there are threaded bore holes. As well as a hole through which the device is connected to the water-lifting tube. There are calibrated slots and connecting threads in the housing or the beams (extending to all sides of the side plastic tubes).Finally the Bottom Distributor for a 13″ to 16″ tank – 2.5″ mount works great for water softeners, iron filters, carbon filters, sediment filters, and all other back washing and up flow tank filter systems. This eliminates the need for gravel beds in fine mesh resin systems without sacrificing flow.
11h
Mbombela / Nelspruit
1
R 476.56
SavedSave
Please note that shipping and installation is not included.
50 mm Stack Top Distributor Basket Screen for Commercial Water Softener and Filter Valve HeadFirstly Bottom Distributor for a 14″ to 36″ tank – 4″ mount for valve heads that fits a standard riser tube (PVC riser pipe) of 1 1/2″ diameter (50mm OD).This top distributor screen strainer is designed to prevent any of the media from exiting your mineral tank. The segmented stack distributors have the ability to open up when back washed, removing any possible fines that might accumulate on the distributor.This upper basket fits most of standard valve head brands for water softener, sand filter, carbon filter, DI Filter such as Fleck, Clack, Auto troll and Runxin. Fits manual valve heads, in – out heads. (Please check your existing valve head manual before purchasing).The top strainer screen works great for water softeners, iron filters, carbon filters, sediment filters, zeolite vessel, DI resin filter, pH filters, and all other back washing and up flow tank filter systems.Dimensions: H210mm x ø90mm.Type: Stacked upper strainer (50 mm OD).Bottom Distributor for a 14″ to 36″ tank – 4″ mountWater distributor is generally installed inside FRP tanks. Including softening water tanks, quartz sand filters and activated carbon filters, and plays the role of distributing water evenly. Lowering flow rate and impact and preventing filter material leakage.Top and Bottom Strainers is generally made of PP, ABS, PVC and features simple structure. Easy operation, easy to install and remove, low energy consumption, small footprint and long lifespan. It is often used in pre filtration systems, softened water treatment equipment, filter tanks or mixing tanks.
11h
Mbombela / Nelspruit
1
R 61
SavedSave
Please note that shipping and installation is not included.Bottom Strainer 27mmThe top and bottom strainers are used to block big particles and the media leaving the vessel.Water distributor is generally installed inside FRP tanks. Including softening water tanks, quartz sand filters and activated carbon filters plays the role of distributing water evenly. Lowering flow rate and impact and preventing filter material leakage.It is generally made of PP, ABS, PVC and features simple structure. Easy operation, easy to install and remove, low energy consumption, small foot print and long lifespan. It is often used in pre filtration systems, softened water treatment equipment, filter tanks or mixing tanks.Bottom Strainer 27mm might vary in shape, size, diameter and other characteristics that are tailored to the specific requirements of the water treatment system. However, in general, the switch gear is a compact piece made from durable, impact-resistant plastic. In the walls of the distributor housing there are threaded bore holes. As well as a hole through which the device is connected to the water-lifting tube.In general, the switch gear is a compact piece made from durable, impact-resistant plastic. In the walls of the distributor housing there are threaded bore holes. As well as a hole through which the device is connected to the water-lifting tube. There are calibrated slots and connecting threads in the housing or the beams (extending to all sides of the side plastic tubes). This eliminates the need for gravel beds in fine mesh resin systems without sacrificing flow.
11h
Mbombela / Nelspruit
1
R 320.24
SavedSave
Please note that shipping and installation is not included.50 mm Stack Top Distributor Basket Screen for Commercial Water Softener and Filter Valve HeadHigh Flow Stack Top Distributor for a 14″ to 36″ tank – 4″ mount. For valve heads that fits a standard riser tube (PVC riser pipe) of 1 1/2″ diameter (50mm OD).This top distributor screen strainer is designed to prevent any of the media from exiting your mineral tank. The segmented stack distributors have the ability to open up when back washed. Removing any possible fines that might accumulate on the distributor.This upper basket fits most of standard valve head brands for water softener, sand filter, carbon filter, DI Filter such as Fleck, Clack, Auto trol and Runxin. Fits manual valve heads, in – out heads. (Please check your existing valve head manual before purchasing).The top strainer screen works great for water softeners, iron filters, carbon filters, sediment filters, zeolite vessel, DI resin filter, pH filters, and all other back washing and up flow tank filter systems.Dimensions: H210mm x ø90mm.Type: Stacked upper strainer (50 mm OD)Top Distributor for a 14″ to 36″ tank – 4″ mountWater distributor is generally installed inside FRP tanks including softening water tanks, quartz sand filters and activated carbon filters, and plays the role of distributing water evenly, lowering flow rate and impact and preventing filter material leakage.It is generally made of PP, ABS, PVC and features simple structure, easy operation, easy to install and remove, low energy consumption, small footprint and long lifespan. It is often used in pre-filtration systems, softened water treatment equipment, filter tanks or mixing tanks.
12h
Mbombela / Nelspruit
1
R 47.66
SavedSave
Please note that shipping and installation is not included.The effectiveness of top strainer 27mm and ion exchange media is a function of the surface area in contact with the solution to be treated. Distributors help spread the water throughout the media for increased contact and the prevention of channeling.Firstly in cleaning systems, top strainer 27mm. The upper ones protect the control valve from being clogged by particles of a granular load. The lower ones evenly distribute the flow of water leaving the lifting tube in different directions. Also collect the already filtered water and send it back to the lifting tube.Top strainer 27mm might vary in shape, size, diameter and other characteristics. That are tailored to the specific requirements of the water treatment system. However, in general, the switch gear is a compact piece made from durable, impact-resistant plastic. Certainly in the walls of the distributor housing there are threaded bore holes. As well as a hole through which the device is connected to the water-lifting tube. There are calibrated slots and connecting threads in the housing or the beams (extending to all sides of the side plastic tubes).It is generally made of PP, ABS, PVC and features simple structure, easy operation, easy to install and remove, low energy consumption, small footprint and long lifespan. It is often used in pre-filtration systems, softened water treatment equipment, filter tanks or mixing tanks.
12h
Mbombela / Nelspruit
1
Contact f/price
SavedSave
Please note that shipping and installation is not included.Rotameter 1-7 l/pm Round Profile
ABS material, good sealing
This instrument measures the rate of flow of oil or waterIts measurement lines are printed onto the glass exterior, making it easy to read and derive an accurate measurementThe straight tube style easily the liquid tube with two end threadsUsed to measure flow rate of fluid, -way pulsation liquidBody: AcrylicOrigin: EPDMConnections: PolypropyleneGuide: Stainless Steel 304Float: Stainless Steel 304Maximum pressure: 100 PSITemperature withstanding : 5 to 50°CAccuracy: +-5%.In reality with an easy-to-read cover on the acrylic body, the Rotameter 1-7 l/pm Round Profile are durable, accurate in their measurement. As well as robust and practically indestructible.In summary a rotameter is used to measure the rate of liquid or gas flowing through a system of pipes at any given time. They provide a constant flow rate measurement and can also offer optional switching capabilities to control the flow in a system or process.So Rotameter type flow meters are referred to by a number of names including rotameter, variable area flow meters, and float-type flow meters. Variable area rotameter technology has been around for more than 100 years. Finally this type of flow meter is among the most commonly sold and installed flow meters in the world.
12h
Mbombela / Nelspruit
1
R 1,323.06
SavedSave
Please note that shipping and installation is not included.Rotameter 1.6 – 16 m3h Plastic Tube Type Water
Firstly ABS material, good sealing
This instrument measures the rate of flow of water
Its measurement lines are printed onto the glass exterior, making it easy to read and derive an accurate measurement
The straight tube style easily the liquid tube with two end threadsUsed to measure flow rate of fluid, -way pulsation liquid.This plastic Rotameter water flow meter is specifically designed to provide a high level of accuracy when measuring the amount of water supplied through the pipeline. Not easy to break, durable.Max temp: 60 deg CelsiusMax pressure: 6 barBody: AcrylonitrilestyreneFloat/Guide: Plastic / 316L Stainless SteelConnectors: UPVC union adapter socket63mmF in and outletIn reality with an easy-to-read cover on the acrylic body, the Rotameter 1.6 – 16 m3h Plastic Tube Type Water is durable, accurate in their measurement. As well as robust and practically indestructible. In summary a rotameter is used to measure the rate of liquid flowing through a system of pipes at any given time. They provide a constant flow rate measurement and can also offer optional switching capabilities to control the flow in a system or process.Rotameter type flow meters are referred to by a number of names including rotameter, variable area flow meters, and float-type flow meters. Variable area rotameter technology has been around for more than 100 years. Finally this type of flow meter is among the most commonly sold and installed flow meters in the world.
12h
Mbombela / Nelspruit
1
R 503.01
SavedSave
Please note that shipping and installation is not included.Rotameter 10-70 l/pm Round ProfileFirstly ABS material, good sealingThis instrument measures the rate of flow of oil or water.Its measurement lines are printed onto the glass exterior, making it easy to read and derive an accurate measurement.The straight tube style easily the liquid tube with two end threadsUsed to measure flow rate of fluid, -way pulsation liquid:Body: AcrylicOrigin: EPDMConnections Type: PolypropyleneGuide: Stainless Steel 304Float: Stainless Steel 304Maximum pressure: 100 PSITemperature withstanding : 5 to 50°CAccuracy: +-5 %.1/2″ F in and outThe unit of the measurement is in liters or gallons per minuteIn reality with an easy-to-read cover on the acrylic body, the Rotameter 10-70 l/pm Round Profile are durable, accurate in their measurement. As well as robust and practically indestructible.In summary a rotameter is used to measure the rate of liquid or gas flowing through a system of pipes at any given time. They provide a constant flow rate measurement and can also offer optional switching capabilities to control the flow in a system or process.Rotameter type flow meters are referred to by a number of names including rotameter, variable area flow meters, and float-type flow meters. Variable area rotameter technology has been around for more than 100 years. Finally this type of flow meter is among the most commonly sold and installed flow meters in the world.
12h
Mbombela / Nelspruit
1
R 521.64
SavedSave
Please note that shipping and installation is not included.Rotameter 160 – 1600 32mmF plastic tube type waterFirstly ABS material, good sealing.This instrument measures the rate of flow of water.Its measurement lines are printed onto the glass exterior, making it easy to read and derive an accurate measurement.The straight tube style easily the liquid tube with two end threads.Used to measure flow rate of fluid, -way pulsation liquid.This plastic Rotameter water flow meter is specifically designed to provide a high level of accuracy when measuring the amount of water supplied through the pipeline. Not easy to break, durable.Max temp: 60 deg CMax pressure: 6 barBody: AcrylonitrilestyreneFloat/Guide: Plastic / 316L Stainless SteelConnectors: UPVC union adapter socketIn reality with an easy-to-read cover on the acrylic body, the Rotameter 160 – 1600 32mmF plastic tube type water are durable, accurate in their measurement. As well as robust and practically indestructible.In summary a rotameter is used to measure the rate of liquid flowing through a system of pipes at any given time. They provide a constant flow rate measurement and can also offer optional switching capabilities to control the flow in a system or process.Rotameter type flow meters are referred to by a number of names including rotameter, variable area flow meters, and float-type flow meters. Variable area rotameter technology has been around for more than 100 years. Finally this type of flow meter is among the most commonly sold and installed flow meters in the world.
13h
Mbombela / Nelspruit
1
R 370.12
SavedSave
Please note that shipping and installation is not included.Rotameter 2-18 l/pm Round Profile
ABS material, good sealing.
This instrument measures the rate of flow of oil or water.
Its measurement lines are printed onto the glass exterior, making it easy to read and derive an accurate measurement.
The straight tube style easily the liquid tube with two end threads.
Used to measure flow rate of fluid, -way pulsation liquid.
Body: AcrylicOrigin: EPDMConnections: PolypropyleneGuide: Stainless Steel 304Float: Stainless Steel 304Maximum pressure: 100 PSITemperature withstanding : 5 to 50°CAccuracy: +-5%.1/2″ F in and outIn reality with an easy-to-read cover on the acrylic body, the Rotameter 2-18 l/pm Round Profile are durable, accurate in their measurement. As well as robust and practically indestructible.In summary a rotameter is used to measure the rate of liquid or gas flowing through a system of pipes at any given time. They provide a constant flow rate measurement and can also offer optional switching capabilities to control the flow in a system or process.So Rotameter type flow meters are referred to by a number of names including rotameter, variable area flow meters, and float-type flow meters. Variable area rotameter technology has been around for more than 100 years. Finally this type of flow meter is among the most commonly sold and installed flow meters in the world.
13h
Mbombela / Nelspruit
1
R 503.01
SavedSave
Please note that shipping and installation is not included.Rotameter 5-35 l/pm round profile
Firstly ABS material, good sealing.
This instrument measures the rate of flow of oil or water.
Its measurement lines are printed onto the glass exterior, making it easy to read and derive an accurate measurement.
The straight tube style easily the liquid tube with two end threads.
Used to measure flow rate of fluid, -way pulsation liquid.Body: AcrylicOrigin: EPDMConnections: PolypropyleneGuide: Stainless Steel 304Float: Stainless Steel 304Maximum pressure: 100 PSITemperature withstanding : 5 to 50°CAccuracy: +-5%.1″ F in and out
In reality with an easy-to-read cover on the acrylic body, the Rotameter 5-35 l/pm Round Profile are durable, accurate in their measurement. As well as robust and practically indestructible.In summary a rotameter is used to measure the rate of liquid or gas flowing through a system of pipes at any given time. They provide a constant flow rate measurement and can also offer optional switching capabilities to control the flow in a system or process.Rotameter type flow meters are referred to by a number of names including rotameter, variable area flow meters, and float-type flow meters. Variable area rotameter technology has been around for more than 100 years. Finally this type of flow meter is among the most commonly sold and installed flow meters in the world.
13h
Mbombela / Nelspruit
1
R 23.50
SavedSave
Please note that shipping and installation is not included. This 1/4″ x 1/4″ x 1/4″ T, quick connect is widely used in reverse
osmosis (RO) systems and beverage dispensing. Due to its reliable,
leak-free push-fit technology.
1/4″ x 1/4″ x 1/4″ T, quick connect details
Connections: It provides three push-fit connections for 1/4″ OD (outer diameter) tubing. Allowing a single line to be split into two or combined from two into one.Material: The body is made from polypropylene (white) of which are durable and FDA compliant. The O-rings are EPDM, and the collet has teeth to grip the pipe securely.Installation: Installation is tool-free. The tubing is simply pushed firmly into each port until it hits the internal tube stop. To disconnect, the collet (release collar) is pushed toward the body of the fitting, and the pipe is pulled out.Certifications: These fittings are NSF 51 and NSF 61 certified. Ensuring they are safe for use with potable drinking water and other food-grade liquids.Application: The fitting is corrosion-free and more chemically resistant than other plastics. Making it suitable for various water filtration applications and behind-the-wall installations.
14h
Mbombela / Nelspruit
1
R 37.35
SavedSave
Please note that shipping and installation is not included.This Straight Inline Ball valve 1/4” x 1/4″ is designed for Quick Connect Fittings. Made for easy installation and reliable performance, it ensures a secure connection and smooth flow. With its simple design and efficient functionality, it is an essential component for any plumbing system.We raise the industry bar for push connect technology. In addition to its easy installation hence the name Quick Fit Fittings, Valves and Diverters. Our products allow for higher pressure ranges and better pressure performance over competitive push fittings.Ball valve 1/4” x 1/4″ allow users to connect tubing or hose securely without the need for tools or additional clamps. By simply pushing the tubing into the fitting, it locks in place, providing a reliable seal. All of the RO filter systems we sell use Quick Fittings. These quick-connect fittings make it easy to connect a reverse osmosis filter system with an RO faucet or refrigerator water dispenser. Made of high quality plastic material, solid and durable and a long service life. The filter protection design effectively keep the RO system operation in good condition. High Quality for a reliable leak free connections. There are a few different Quick Fitting types available:Female thread fittingsStems (or male fittings) threaded on one end with quick connect on the other endElbow quick-connect fitting
14h
Mbombela / Nelspruit
1
R 41.22
SavedSave
Please note that shipping and installation is not included.This Ball valve 1/4″ x 3/8″ is designed for Quick Connect Fittings. Made for easy installation and reliable performance, it ensures a secure connection and smooth flow. With its simple design and efficient functionality, it is an essential component for any plumbing system. It is primarily designed for use in potable water applications, such as water treatment, reverse osmosis systems, and beverage dispensing.Easily incorporate a shut off valve into a system to isolate the supply for service and maintenance. Ball valve 1/4” x 3/8″ makes connecting tubing quick and easy. Shut-off valves are manufactured in white polypropylene with food grade EPDM seals. These valves have been developed to satisfy the filtered pure water market.
Features and benefits:
Quarter turn to open or closeWhite Polypropylene body, EPDM sealsLead Free materialsQuick and easy connection/disconnectionCertifications: NSF 51 and 61 certified, as well as FDA-compliant, making it safe for potable water applications.
14h
Mbombela / Nelspruit
1
R 49,091
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 9.2kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller. As can been seen on data sheetCarbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 9.2kW – three phaseMaximum operating pressure: 12 bar (1200 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage:Three-phase 230-400 VInlet: 2″Outlet: 1.1/4″
Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
15h
Mbombela / Nelspruit
1
R 42,426
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 7.5kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller. As can been seen on data sheetCarbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 7.5kW – three phaseMaximum operating pressure: 12 bar (1200 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 230-400 VInlet: 2″Outlet: 1.1/4″
Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
15h
Mbombela / Nelspruit
1
R 38,182
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 5.5kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 5.5kW – three phaseMaximum operating pressure: 12 bar (1200 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 230-400 VInlet: 2″Outlet: 1.1/4″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
15h
Mbombela / Nelspruit
1
R 20,000
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 4kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller. As can been seen on technical data sheet.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTORRotor running on ball bearings, oversized to ensure low noise and durability.Closed asynchronous type, external ventilation cooling.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.DAB centrifugal double impeller K pump 4kW – three phaseMaximum operating pressure: 12 bar (1200 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 230-400 VInlet: 1.1/2″Outlet: 1″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
15h
Mbombela / Nelspruit
1
R 18,183
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 3kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 3kW – three phaseMaximum operating pressure: 10 bar (1000 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.
Standard voltage: Three-phase 230-400 VInlet: 1.1/2″Outlet: 1″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
15h
Mbombela / NelspruitSave this search and get notified
when new items are posted!