Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for for job in "for job" in Engineering & Architecture jobs in Other in Other
1
Our client in the agricultural sector is seeking an Automation Technician to join their team. This role will report directly to the Technical Manager.
Duties & Responsibilities:
Development of AutoCAD drawings and design.
Assist with technical projects and Beta Sites as and when needed.
Assist with assembly.
Automation of irrigation dosing units.
Assist with controllers in cabinets with protection devices.
Assist with assembly of radio units.
Testing software and hardware.
Wiring of cabinets and panels
Troubleshooting of controller hardware and software.
Assist with telephonic support to dealers and end users.
On-Site support to dealers and end users â?? South Africa and SADC Countries.
Training on DF products, training dealers and end users on the correct usage of the automation equipment.
Assist with the servicing of filter banks and back flush controllers.
Requirements:
Matric certificate.
3+ years in a similar role.
Must have good communication skills in English and Afrikaans.
National diploma or degree in electronics/mechatronics.
Drivers license.
ELV electrical systems and VSD/PLC.
An understanding of hydraulics
AutoCAD knowledge.
Problem solving and organizational skills.
To apply, please send your CV with your salary expectations to natasha@personastaff.co.za  Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. By applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request our POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004608/N&source=gumtree
2y
Persona Staff Recruitment
Ads in other locations
1
Responsibilities:Receive, store, and issue stock accuratelyLoad and deliver goods safelyMaintain warehouse and vehicle cleanlinessOperate forklift and handle hazardous goods following safety guidelinesRequirements:Valid PDP and Code 10 drivers licenseHazchem / Dangerous Goods certificationForklift licenseStrong work ethic and attention to detail If you are dependable and ready to join a dynamic team, apply today!
https://www.jobplacements.com/Jobs/S/Storeman-Driver-1253575-Job-Search-02-03-2026-00-00-00-AM.asp?sid=gumtree
1d
Job Placements
1
A recent professional profile photo is to accompany your applicationEMPLOYMENT TYPE : PermanentSECTOR : Factory / ManufacturingBASIC SALARY : R15 000.00 R20 000.00 + benefit contribution after 3 monthsSTART DATE : A.S.A.P / ImmediateREQUIREMENTS:12 years experience in a drawing office, preferably working with sheet metal and laser cuttingProficiency in MS OfficeExperience with SolidWorks (3D Modelling)Knowledge of bending software, e.g., AmadaExperience with nesting software, e.g., SigmaNestDiploma in Draughting or N5N6 qualificationSolidWorks CertificationPractical experience with sheet metal DUTIES:Creating sheet metal flat patterns.Preparing mechanical engineering drawings for machine parts.Producing part drawings and assembly drawings.Measuring and inspecting partsPreparing cutting lists for laser cutting.Compiling Bills of Materials (BOM).HOURS:Monday to Friday: 08:00 17:00
https://www.jobplacements.com/Jobs/J/Junior-Draughtsman-1244558-Job-Search-02-04-2026-00-00-00-AM.asp?sid=gumtree
10h
Job Placements
1
1
Responsibilities include:We operate in a high-pressure environment and service both Residential and Commercial clients. Our level of service to clients is of a superior level. To ensure that our excellent standards are maintained, the following work experience and requirements are non-negotiables:A minimum of 3 years of Commercial & Residential Maintenance PlumbingProven experience in installing water meters of various sizesStrong leadership / team management skillsFully bilingual in Afrikaans and English (spoken and written)Good communication and written skillsTeam leadership experienceClient Relationship ManagementStock control and managementComputer literate in MS Word packagesKnowledge and understanding of Plumbing SANS codesExperience in working with copper, galvanized, Mepla, Hep2O pipes and fittingsThe following will be an advantage: Leak DetectionHeat Pump & SolarResidential Back-up Water SolutionMedical Fitness Certificate
https://www.jobplacements.com/Jobs/P/Plumber-1251659-Job-Search-01-26-2026-00-00-00-AM.asp?sid=gumtree
9d
Job Placements
1
RESPONSIBILITIES:Inspect trucks to identify mechanical issues and use diagnostic tools to interpret results.Repair and replace faulty mechanical, electrical, and electronic components in engines,transmissions, braking systems, and steering mechanismsPerform vehicle maintenance and repairs in accordance with service standards and withinagreed timeframes.Maintain detailed records of all inspections and repairs performed on each vehicle.Accurately complete job cards and parts requisitions.Attend to breakdowns as required.Ensure compliance with the OHS Act and SHEQ standards by promoting a safe, clean, andwell-organised work environment.REQUIREMENTS:Qualified / Partly qualified Diesel MechanicGeneral Auto Electrical ExperienceBasic knowledge on Thermo King diesel cooling unit enginesWork experience with Volvo trucks advantageousCode 8 Drivers LicenseComputer literateAvailable for after-hours and weekend work to attend to breakdownsTO APPLY:If you would like to apply or receive more information about this position, please Apply online at />We take great care in assessing each application individually, however only shortlisted candidates will be contacted, therefore please deem your application as unsuccessful if you receive no feedback after 2 weeks of sending your CV.
https://www.jobplacements.com/Jobs/D/DIESEL-MECHANIC-1254416-Job-Search-01-21-2026-10-36-45-AM.asp?sid=gumtree
13d
Job Placements
1
Key Responsibilities Field Performance & AnalyticsRemote Troubleshooting & Technical EscalationsInternal Systems & Workflow ImprovementsProduct Development Support (R&D Collaboration)MEP & Site Readiness DrawingsDocumentation, CRM Accuracy & Technical CommunicationShowroom Technical PerformanceSUCCESS METRICS (KPIs)Reduction in repeat technical failures.Faster resolution time for escalated cases.Accuracy, clarity, and quality of performance reports.Improved first-time-fix outcomes (in collaboration with Field Service).Effective identification of systemic issues.Accuracy and consistency of technical workflows.Quality of MEP drawings and site readiness guidance.Contribution to product improvement initiatives.Accuracy of documentation.Degree or diploma in Mechanical, Electrical, Mechatronics, Industrial Engineering preferred.
https://www.jobplacements.com/Jobs/J/Junior-Technical-Specialist-Product-Success-1254382-Job-Search-01-21-2026-10-24-25-AM.asp?sid=gumtree
13d
Job Placements
1
1
Dear Potential Candidate:
(If you read this ad, the position is still available)
Kindly read the ad in detail until the end, before sending your CV.
We have a vacancy for a Senior Commissioning Technician to work on Fire Detection, CCTV, Access Control and other Security related systems. We operate in the middle to high-end of this specific market segment and are well established within the industry.
Minimum Requirements:
Minimum 3 years relevant experience is a definite pre-requisite. SAQCC registration for Fire Detection Systems is required. Training certificates to work on Fire Detection, Access Control & CCTV Systems will be an advantage and make you stand out from the rest of the applicants.
If you are looking for a new exciting career opportunity, please send your detailed CV with contactable references to hr@integratek.co.za.
We are looking for candidates who are seeking long term employment and are dedicated to develop their career within our company.
Responsibility:In return for your commitment and dedication we offer:
• 13th cheque
• Performance Incentives
• External Product Specific Training opportunities
• Company Cell Phone & Laptop if needed
• Company Vehicle with petrol card
• Market related Salary
Please apply by e-mailing a detailed professional CV with references to hr@integratek.co.za
Please note:
Should you not hear from us within 4 weeks, please consider your application unsuccessful. We advertise on a permanent basis to find suitable candidates to expand and grow the company.
PLEASE ONLY send your CV if:
You have a South African ID Document – we do not employ foreign nationals
You currently live in the Cape Town, Stellenbosch or George areas
You DO NOT have a criminal record
You have relevant technical experience – this position is NOT for general workers, security guards or technicians without relevant experience.
If you currently live in the Cape Town, Stellenbosch or George Areas – we do not employ people outside of the Cape Town, Stellenbosch and George areas.
Thank you, we look forward to receive your updated and most recent CV.Job Reference #: SnrCommissioningTechnician
6mo
Integratek
Topmech SA is currently seeking
a qualified and/or experienced Diesel Mechanic
to join our team. This is an excellent opportunity for a motivated individual
looking for stable work in a professional environment.
Requirements:
·
Proven
working experience as an Earth Moving Mechanic or a relevant
qualification in diesel mechanics.
·
Valid driver’s
license
(essential)
·
Strong
knowledge of diesel engines, diagnostics, servicing, and repairs
·
Ability
to work independently and as part of a team.
·
Reliable,
punctual, and safety-conscious
Responsibilities:
·
Diagnose,
service, and repair diesel vehicles and machinery.
·
Perform
routine maintenance and inspections.
·
Identify
faults and carry out repairs efficiently.
·
Maintain
a clean and safe work environment.
What We Offer:0
·
Competitive
salary based on experience and qualifications.
·
Ongoing
work with opportunities for growth
·
Supportive
team and professional work environment
How to Apply:
Please email your CV and relevant documents to accounts@topmech.co.za
16d
1
Purpose of the Role: To service, maintain, and repair high-pressure cleaning equipment, ensuring reliable performance, excellent customer support, and timely on-site service delivery.Responsibilities include but are not limited to:Perform repairs, maintenance, and servicing of high-pressure cleaning equipmentDiagnose and troubleshoot technical issues to ensure minimal downtimeProvide excellent customer service and technical support to clientsManage inventory of spare parts and maintain accurate service recordsCriteria:Matric or similar certificationA proven track-record in a similar technical role (water purification, solar, compressor repair industry)Technical aptitude or experience with equipment repairsHighly motivated with a hands-on, can-do attitudeCustomer service-oriented with strong interpersonal skillsFluency in English and AfrikaansExcellent problem-solving and time-management skillsValid drivers license and willingness to travel for on-site service callsReliable, sincere, and approachable personalityReside in or near Cape Towns Northern Suburbs ONLY CANDIDATES RESIDING IN OR NEAR CAPE TOWNS NORTHERN SUBURBS WILL BE CONSIDERED FOR THIS ROLE
https://www.jobplacements.com/Jobs/J/Junior-Technician-HP-Cleaning-Equipment-1252723-Job-Search-01-16-2026-10-00-08-AM.asp?sid=gumtree
18d
Job Placements
1
Motor Vehicle MechanicLocation: Montague GardensRMI Approved Repair CentreWe are urgently seeking a Semi-Qualified or Very Experienced Motor Vehicle Technician to join our trusted, RMI-approved repair centre in Montague Gardens. Starting salary from R15,000/month, negotiable based on skills and experience - PAYE, UIF and pension fund included What We Offer:- Full-time position: Monday to Friday, 7:00 AM 5:00 PM- Work with a team of skilled professionals in a busy, reputable workshop- Opportunity to work on all brands of motor vehicles Requirements:- Minimum 10 years hands-on experience in vehicle diagnostics, repairs, and servicing- Strong work ethic and ability to work independently- Semi-skilled or qualified technician- Reliability and punctuality are essential- Must have contactable references!
https://www.jobplacements.com/Jobs/M/Motor-Vehicle-Mechanic-1202317-Job-Search-07-11-2025-04-03-07-AM.asp?sid=gumtree
7mo
Job Placements
1
1
Our client is based in Brackenfell, and they are seeking to employ Welders. Do you have a matric certificate and at least one years working experience within a welding or semi-skilled boiler making position?
Responsibilities:
· Completed Grade 12 / Matric Certificate (certificate will be requested).
· Welding experience a must (Arc / Mig / Stick).
· Fabrication experience is a MUST.
· Forklift license is beneficial.
· Assistant operating of machinery experience beneficial.
· Must be hardworking and dedicated.
· Ability and willingness to work 12-hour shifts, including nightshifts and weekends.
· Clean criminal record.
AREA: Brackenfell (Transport will be own responsibility)
APPLY: Send your CV and all documents to reception@personastaff.co.za
Please note that only short-listed candidates will be contacted.
reception@personastaff.co.za
2y
Persona Staff Recruitment
Save this search and get notified
when new items are posted!