Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Results for architectural technologist in Engineering & Architecture jobs in Gauteng
1
SavedSave
Mechatronic Engineer required to assist with mechanical and Automation design at small automation specialist in mechanical, electrical and control high tech solutions and development company. Will be responsible for PLC programming and integration.MECHATRONIC DESIGN / ELECTRONIC PROCESS AUTOMATION TECHNICIAN/TECHNOLOGIST: PretoriaAutomation and System Integration company requires a mechatronic designer who can assist the company with Automation and Process Control designs.Qualification:BTech/ National Diploma Mechatronic or Electronic Engineering 2 Years PLC programming skillsKey skills required:Experience in Codesys programming.Ability to design control systems with inclusion of PLC specifications, I/O selection, relay Logic understanding, wiring diagrams, wire numbering and panel wiring.Must be able to do both hardware and software.Good knowledge of automated systems.Allan Bradley and Festo PLC programming.Skills needed with servo drive setup and programming.Must have good networking skills such as Ethernet IP, Profibus etc. the person must be hands on.Robot programming experience. Preferably Fanuc.Must have good fault finding skills on wiring, sensors, servo motors and other equipment.Mechanical systems Skills
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzUwMDk4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1189555&xid=1266_50098
2y
1
Johannesburg - Architectural Technologist/Technical interior designer/Draughtsman – advanced in Revit required by Top Leisure Design Company3–6-month contract to start with, then permanentInternational Turnkey Architectural/Interior/Project Management CompanyLeisure projects worldwideAn established firm based in Johannesburg is looking for an experienced Architectural Technologist/Revit Draughtsman/Technical designer with advanced Revit proficiencyCandidates must have technical design, documentation and detailing experience and preferably experience working on very high-end projectsGreat opportunity to work on hospitality projects: international hotels and leisure resortsRequirements:2-7 years’ experience in Architectural Draughting or Technical Interior Design – Can be an Architectural Technologist/Draughtsman/Technical DesignerEmployees work at the officeDeadline drivenAbility to work under pressure and on multiple projects simultaneouslyJob Description:Technical drawingsWorking and construction drawingsDetailing and layoutsWindow and door schedulesSpace planningDocument coordination and management for assigned projectsCoding plans, elevations and detailed drawingsCompiling and presenting client presentationsDocumentation of specifications and illustration sheetsSourcing general and technical information for documentationSend detailed CVs with all your roles and responsibilities per position, project lists per position and portfolio links or PDF portfolios 10Mbs and under
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ2Mzk4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1174992&xid=1266_46398
2y
1
SavedSave
An Architectural Technologist organization based in Gauteng is searching for a Technical Designer to join their dynamic team. Ideal candidates would have the following skills: Roles and Responsibilities (In Revit) Modelling – building system ele...Tertiary qualification : Diploma or Degree in Architecture Retail, Industrial, Hospitality , Leisure Competent in using Revit Architecture Teamwork & Communication – projects are large in scale and require working in a team environment under a project coordinatorOrganisation and time management – we run on very tight deadlines which require all staff to complete work as programmedExperience in the Hospitality field would be beneficial
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18yOTJfMjQxMjAxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1160174&xid=292_241201
2y
1
*System Engineer (Protection/Automation Engineer) Digital Grids *
The Digital Grid is one of the leading global suppliers of products, systems, solutions and services for the economical, reliable and intelligent transmission and distribution of electrical power. The Section’s portfolio ranges from systems for the low-voltage and distribution power grid level to smart grids and energy automation solutions to power supplies for industrial plants and high-voltage transmission systems.
* Implementing projects within time, cost and quality parameters.
* Transmission Protection and Automation scheme design – interpreting and translating customer requirements into a complete system as well as applying innovative approaches i.t.o products, technology and people
* Testing of Protection and Automation schemes – be responsible to generate, testing documentation and perform testing at factory and commissioning onsite as required during project execution.
* Providing customer support – the Protection and automation system engineer is required to perform post-fault investigations as required by the customer
* Support Business development by Identifying Business opportunities and Market Potential in the Utility, Infrastructure, Industry and other market verticals.
* BsC or B.Eng in Electrical engineering
* 5 + Years of Protection Design experience
* Good understanding of protection and substation automation technology systems
* Registered as Professional Engineer or Professional Technologist with ECSA
* Experience in working with Digsi 5
* Independent working style, highly flexible for global travel and going the extra mile
* Several years of leadership experience in an African context
* Excellent communication & professional networking skills
* Strong intercultural sensitivity and ability to work with teams and stakeholders around the globe
* Highly desirable professional experience outside of home country
* Fluent in English
* Valid Driver’s license
* Valid Passport
*Market Related *
* BsC or B.Eng in Electrical engineering
* 5 + Years of Protection Design experience
* Good understanding of protection and substation automation technology systems
* Registered as Professional Engineer or Professional Technologist with ECSA
* Experience in working with Digsi 5
* Independent working style, highly flexible for global travel and going the extra mile
* Several years of leadership experience in an African context
* Excellent communication & professional networking skills
* Strong intercultural sensitivity and ability to work with teams and stakeholders around the globe
* Highly desirable professional experience outside of home country
* Fluent in English
* Valid Driver’s license
* Valid Passport
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzE5MzI4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1172221&xid=1555_19328
2y
Ads in other locations
1
Architect or Architectural Technologist to join our team. The ideal candidate will have a minimum of 2 years of construction site experience, along with proficiency in construction documentation and software, specifically ArchiCAD. This position requires heavy lifting and general work, as well as extensive travel all over South Africa, including overnight stays and long-distance travel. Therefore, candidates must possess their own vehicle.Responsibilities:Must be proficient in ArchiCAD as well as the OFFICE SUITE software.Conduct on-site assessments and provide technical support during the construction phase.Collaborate with project teams to ensure designs meet client requirements and adhere to regulatory standards.Basic project admin work.Project management skills, including scheduling and budgeting not required but will be advantageous.RequirementsMinimum of 2 years of construction site experience.Strong understanding of construction documentation.Must have own vehicle.Registration with SACAP (South African Council for the Architectural Profession) or any other professional body.Excellent communication and teamwork skills. Able to work and collaborate with other built environment professionals. Kindly Send your CV via WhatsApp to the number provided. Only those who qualify will be contacted back.
3d
VERIFIED
1
SavedSave
I have a contract opportunity available with the possibility of going permanent for one of my clients in the mining industry
Please see below and let me know if you are familiar and willing to continue:
Engineer, PM or QS with experience in mining (iron ore specifically but could be other)Experience needed in capital projects in the mining sector – I imagine it would be either as package engineer or PM/Assistant PM type roleAround 10 years post graduate experience. Could be professional technologist rather than PrEngPerson would have to able to operate in difficult client environment so would need to be mature and able to manage client at differing levelsThe client is Vedanta and the person will have to prepared to operate from Aggeneys in the NC for the next 12 to 18 monthsDepending on the individual we could take his/her on as contractor or full time. After the engagement person would operate from our Johannesburg office
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMzM2MDE4ND9zb3VyY2U9Z3VtdHJlZQ==&jid=1260622&xid=13360184
3d
1
SavedSave
Cape Town - Employment Problem? We Have The Solution!My client converts engineering concepts into reality. They are a leading service-driven company that provides professional, quality expertise and have a long history of successful projects across Africa and beyond.Requirements include:Minimum 2 to 3 years working experience with exposure to Contract Administration and design.Proficient in MS Office and AutoCAD and Civil3DDrivers license with own transport.Experience:Proven skills in design of civil engineering projects with emphasis on earthworks, roads, stormwater management and water and sewer reticulation networks.Ability to work on multiple projects simultaneously.Preparation of Engineering reports.Preparation of project documentation and Bill of Quantities.Liaison with clients and other members of project teams.NDip Civil Engineering
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ3MjY4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1177901&xid=1266_47268
2y
5
Civil engineering contractor and consultant in Cape Town looking for suitably qualified Senior Foreman, Site Agent, Technician or Technologist type for construction sites in Cape Town area. Preferred Min, Qualifications required:- NDIP: Civil (NQF 6)- Driver's License- Advantage: Project Management, Survey, Construction Management, OHSCV can be sent to emanagement021@gmail.com and shortlisted candidates will be contacted for interviews by 22 April 2024.
12d
1
SavedSave
*A well established multinational engineering consultancy is looking to appoint an experienced Project Engineer, registered with ECSA as a Professional Engineer/Technologist. One will be responsible for the management of the planning, design and construction of engineering and building projects from inception to completion. *
* *Manage construction contracts as Contracts Engineer \ Employer’s Agent \ Principal Agent. *
* *Prepare tender documents. *
* *Prepare reports (Project Inception, Concept and Viability, Design, Tender Evaluation, progress, financial, close-out, etc). *
* *Day-to day contract administration and manage civil engineering and housing projects. *
* *Effectively facilitate and deal with stormwater management.*
* *Handle technical queries and resolutions *
* *Lead site and technical meetings on site, including the taking minutes.*
* *Financial control of construction contracts *
* *Communicate frequently with all professionals and clients. *
* *Handle technical queries and dispute resolutions in conjunction with others. *
* *Assist with project safety and environmental matters during construction.*
* *General office and project related admin.*
* *A bachelor’s degree in Civil Engineering*
* *Registration with ECSA as a Professional Engineer or Professional Technologist. *
* *Registration with SACPCMP as a Professional Construction Project Manager will be advantageous. *
* *Minimum of 7+ years’ verifiable post graduate experience in the planning, design and construction of civil engineering and building projects from inception to completion. *
* *3 years experience in stormwater management. *
* *Proficient in the use of Microsoft Office Suite and Microsoft Office Project. *
* *Basic knowledge and experience with AutoCAD Civil3D, *
* *Experience in the use of Building Information Modelling (BIM) software, in particular BIM360 Docs, ACC Docs and ACC Build will be advantageous. *
* *Must be an effective communicator (personal, phone, writing, email; etc)*
* *Own Vehicle *
* *Valid Driver’s Licence*
Negotiable - Market Related
* *A bachelor’s degree in Civil Engineering*
* *Registration with ECSA as a Professional Engineer or Professional Technologist. *
* *Registration with SACPCMP as a Professional Construction Project Manager will be advantageous. *
* *Minimum of 7+ years’ verifiable post graduate experience in the planning, design and construction of civil engineering and building projects from inception to completion. *
* *3 years experience in stormwater management. *
* *Proficient in the use of Microsoft Office Suite and Microsoft Office Project. *
* *Basic knowledge and experience with AutoCAD Civil3D, *
* *Experience in the use of Building Information Modelling (BIM) software, in particular BIM360 Docs, ACC
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzIxNjkyX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1176759&xid=1555_21692
2y
1
SavedSave
Mechanical Engineer/Technologist - Cape TownA proudly South African company is looking for a Mechanical Engineer/Technologist who has experience in the Water and Industrial sectors to join their passionate team. Could this be you?Minimum requirements:? BTech / B.Eng / Bsc Eng - Electrical Engineering? Registered as a Candidate / Professional with ECSA? 4 + years experience? Experience Pumping Systems, Water/Wastewater Treatment Plants is advantageous. Recruiter: Mass Staffing Projects
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQ3NDk1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1178793&xid=1266_47495
2y
1
SavedSave
*A well established multinational engineering consultancy is looking to appoint an experienced Project Engineer, registered with ECSA as a Professional Engineer/Technologist. One will be responsible for the management of the planning, design and construction of engineering and building projects from inception to completion. *
* *Manage construction contracts as Contracts Engineer \ Employer’s Agent \ Principal Agent. *
* *Prepare tender documents. *
* *Prepare reports (Project Inception, Concept and Viability, Design, Tender Evaluation, progress, financial, close-out, etc). *
* *Day-to day contract administration and manage civil engineering and housing projects. *
* *Effectively facilitate and deal with stormwater management.*
* *Handle technical queries and resolutions *
* *Lead site and technical meetings on site, including the taking minutes.*
* *Financial control of construction contracts *
* *Communicate frequently with all professionals and clients. *
* *Handle technical queries and dispute resolutions in conjunction with others. *
* *Assist with project safety and environmental matters during construction.*
* *General office and project related admin.*
* *A bachelor’s degree in Civil Engineering*
* *Registration with ECSA as a Professional Engineer or Professional Technologist. *
* *Registration with SACPCMP as a Professional Construction Project Manager will be advantageous. *
* *Minimum of 7+ years’ verifiable post graduate experience in the planning, design and construction of civil engineering and building projects from inception to completion. *
* *3 years experience in stormwater management. *
* *Proficient in the use of Microsoft Office Suite and Microsoft Office Project. *
* *Basic knowledge and experience with AutoCAD Civil3D, *
* *Experience in the use of Building Information Modelling (BIM) software, in particular BIM360 Docs, ACC Docs and ACC Build will be advantageous. *
* *Must be an effective communicator (personal, phone, writing, email; etc)*
* *Own Vehicle *
* *Valid Driver’s Licence*
Negotiable - Market Related
* *A bachelor’s degree in Civil Engineering*
* *Registration with ECSA as a Professional Engineer or Professional Technologist. *
* *Registration with SACPCMP as a Professional Construction Project Manager will be advantageous. *
* *Minimum of 7+ years’ verifiable post graduate experience in the planning, design and construction of civil engineering and building projects from inception to completion. *
* *3 years experience in stormwater management. *
* *Proficient in the use of Microsoft Office Suite and Microsoft Office Project. *
* *Basic knowledge and experience with AutoCAD Civil3D, *
* *Experience in the use of Building Information Modelling (BIM) software, in particular BIM360 Docs, ACC
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzIxNjkyX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1176759&xid=1555_21692
2y
1
Our client in the consulting space is looking for a senior resource for their Electrical department for either:
* ECSA registered Professional Electrical Engineer (3+ years post ECSA registration experience)
* ECSA registered Professional Electrical Engineering Technologist (5+ years post ECSA registration experience)
* Senior Electrical Technician (10+ years consulting engineering experience)
* SAQCC qualification
* Electrical building services experience
* Renewable energy experience
* Passing knowledge of Mechanical building services and the interface with electrical services
* Sound knowledge of the JBCC, NEC and FIDIC conditions of contract
* Consulting Engineering experience
* Strong leadership and people skills
* The ability to delegate work and good management skills
* Good problem solving skills with strong technical ability in Building Services and Electrical Reticulation
* Strong technical writing ability for design reports and tender documentation
* SAQCC qualification
* Electrical building services experience
* Renewable energy experience
* Passing knowledge of Mechanical building services and the interface with electrical services
* Sound knowledge of the JBCC, NEC and FIDIC conditions of contract
* Consulting Engineering experience
* Strong leadership and people skills
* The ability to delegate work and good management skills
* Good problem solving skills with strong technical ability in Building Services and Electrical Reticulation
* Strong technical writing ability for design reports and tender documentation
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI4Njg0X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1198075&xid=1555_28684
2y
1
SavedSave
Complement Recruitment are recruiting for a Senior Architectural Technologist based in Port Elizabeth (Gqeberha). This is a permanent position; salary is negotiable depending on experience and skillset. The successful candidate will be part of a team that works on a variety of projects in a well-established and supportive architecture firm. Salary: R22K Negotiable depending on experience.Minimum Requirements:Matric, BTech Diploma or Degree in Architecture, Architectural TechnologyOwn Transport, able to travel to siteExperience with Autodesk Revit software preferred, AutoCADMinimum 3-5 Years strong previous experience as an architectural technologistExcellent knowledge of building envelope and building construction techniquesAble to work in a team as well as collaborating with others on project challenges, self-motivated, and takes initiative on how to “make it work” and able to work under pressure, meet deadlinesHigh Attention to detail and strong work ethic while managing multiple projects at onceLocated in the Port Elizabeth, Gqeberha area Duties:Assisting with creation of design and construction documents for all project phasesUse of your superior knowledge of building science and construction techniques to come up with innovative solutions to potential design issuesWork with the project team to deliver project documentation requirementsCreation of presentation graphics and drawings8 years experience creating construction drawings and 3D models using Revit in a variety of project types including mixed-use residential, institutional, parastatal, commercial, warehousing and healthcare projects.Proven experience overseeing construction administration.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzM3Njc0X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1131637&xid=1266_37674
2y
1
SavedSave
Electrical Engineer/Technologist - Cape TownOur well established client is looking for an Electrical Engineer/Technologist to join their team and take their projects to new heights. Could this be you?Minimum requirements:? BTech / B.Eng - Electrical Engineering? Registered with the ECSA? 4+ years experience? Experience in Motor Control, Instrumentation, SCADA is advantageous Recruiter: Mass Staffing Projects
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzUwMzQzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1190851&xid=1266_50343
2y
1
SavedSave
We have been asked to assist a well-established consulting firm in Cape Town with the recruitment of a qualified Civil Technologist.
Minimum requirements include:
* BTech in Civil Engineering
* Over 5 years’ experience in building related civil services, roads, parking areas, etc.
* Proficiency in AutoCAD and Model Maker
Should you meet the requirements for this position, please email your CV to (engineers@rpo-recruit.za.com)(mailto:engineers@rpo-recruit.za.com) or contact Riana, Meghan or Dawn on 010 900 4087. Alternatively visit our website on (www.rposervices.co.za)(http://www.rposervices.co.za)
Correspondence will only be conducted with short listed candidates. Should you not hear from us within 3 days, please consider your application unsuccessful
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI0MjQ1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1184631&xid=1555_24245
2y
1
SavedSave
C.T. - M.R.I. Tech Lead - Porterville, California United States - 44559 JOB DESCRIPTION Job #: 44559 Title: C.T. - M.R.I. Tech Lead Job Location: Porterville, California - United States Remote Job: Unknown Employment Type: Employer Will Recruit From: Nationwide Relocation Paid?: Yes WHY IS THIS A GREAT OPPORTUNITY?$5k Sign On (3+ years Exp.)Relocation Assistance ($2k In-State and $4K Out-of-State)JOB DESCRIPTION*Shift: 7:00A - 3:30P POSITION SUMMARY: Under the direction of the Administrative Director of Imaging and Physical Therapy, Director of Imaging, and in consultation with the Medical Director, the Lead C.T./M.R.I. Radiologic Technologist performs professional duties involved in a variety of Computed Tomography (CT) and/or MRI exams. Responsible for patient care, comfort and completion of required procedures. Is responsible for the assessment, treatment or care appropriate to the age of the patients served. Demonstrates the ability to obtain and interpret information in terms of the patients needs. Possesses knowledge of growth and development and has an understanding of the range of treatment needed for all patient groups. Responsible for safe radiation protection practices. On call responsibilities may be required. Must be knowledgeable in the area of patient requirements, especially safety and comfort. Must be familiar with all types of radiographic equipment and accessories used in the department. Supervises and schedules technologists to assigned areas. Is responsible for the assessment, treatment and care of patients, creating the work schedule, QC/QA programs and processes, education and training, ordering supplies, time card approval, evaluations, ensure regulatory agency compliance, and any other duties of daily operations at site(s) by organizing and prioritizing procedures and delegating specific duties to keep patient flow effective and in a timely manner. Must be competent to deliver care appropriate to the ages of the patients served. Ensures that the Technologists demonstrate the ability to obtain and interpret information in terms of the patient’s needs. Possesses the knowledge of growth and development and have an understanding of the range of treatment needed for all patient groups.QUALIFICATIONSPOSITION QUALIFICATIONS: Education/License/Certification: Must have current California Diagnostic Radiologic Technologist Licensure and ARRT (R.T.)ARRT Certification in C.T. and MRI is highly preferred.ARMRIT Certification is acceptable in place of ARRT MRI Certification.Must have and maintain BLS or obtain within orientation process.Must have and maintain IV Certification or obtain within 6 months of accepting role.Experience/Skills: Must one (1) year C.T. Experience and one (1) year of M.R.I. Experience.Education: Vocational/Technical/Diplomahttps://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18yOTJfMjM3ODA0X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1137965&xid=292_237804
2y
1
Our client in the consulting space is looking for a senior resource for their Electrical department for either:
* ECSA registered Professional Electrical Engineer (3+ years post ECSA registration experience)
* ECSA registered Professional Electrical Engineering Technologist (5+ years post ECSA registration experience)
* Senior Electrical Technician (10+ years consulting engineering experience)
* SAQCC qualification
* Electrical building services experience
* Renewable energy experience
* Passing knowledge of Mechanical building services and the interface with electrical services
* Sound knowledge of the JBCC, NEC and FIDIC conditions of contract
* Consulting Engineering experience
* Strong leadership and people skills
* The ability to delegate work and good management skills
* Good problem solving skills with strong technical ability in Building Services and Electrical Reticulation
* Strong technical writing ability for design reports and tender documentation
* SAQCC qualification
* Electrical building services experience
* Renewable energy experience
* Passing knowledge of Mechanical building services and the interface with electrical services
* Sound knowledge of the JBCC, NEC and FIDIC conditions of contract
* Consulting Engineering experience
* Strong leadership and people skills
* The ability to delegate work and good management skills
* Good problem solving skills with strong technical ability in Building Services and Electrical Reticulation
* Strong technical writing ability for design reports and tender documentation
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI4Njg2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1198076&xid=1555_28686
2y
1
Building Services Mechanical Engineer / Technologist - Cape TownDescription:MECHANICAL ENGINEERS! A reputable engineering firm covering a diverse spectrum of multi-disciplinary engineering services ranging from Structural Engineering, which is the company’s original core competency, to Civil, Mechanical (HVAC, Wet Services, Fire and Lifts), Electrical and Façade Engineering, is looking for a building services Mechanical Engineer/Technologist to join their Cape Town team.Requirements:• BEng/BSc/BTEch Mechanical Engineering• 5 - 7 years building services experience (HVAC, Fire, Wet services) with Rational Fire experience preferred.• Revit modelling experience would be an advantage.• Attend site and project meetings.• Manage own projects Recruiter: Mass Staffing Projects
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzUyNDIwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1197568&xid=1266_52420
2y
1
A highly professional architectural firm headquartered in Johannesburg is looking for a Professional Senior Architectural Technologist or a Professional Architect. The candidate must have excellent design skills (joinery detailing and general architectural detailing). The candidate must also be proficient in Revit (which is a must) and Autocad. Must also possess an active SACAP registration. Above all, the candidate must be a South African resident, be in possession of a valid drivers license and must be based in Johannesburg or Bloemfontein (if based in Johannesburg, must be willing to relocate to Bloemfontein). Duties and ResponsibilitiesDRAUGHTING & DOCUMENTING:SACAP stages 4 and 5 (tender stage, construction stage)Detailing of construction details, joinery, etc.Interpret client-/ design briefs and document accordingly3D visual representationsON-SITE:Site visits to monitor construction process, co-ordinate contractors and consultants and issue instructionsTravel for said site visit The salary for would be R32 000 – R40 000 gross.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzM4NDM0X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1147400&xid=1266_38434
2y
1
SavedSave
Our client has a position based in Durban for a Mechanical Technologist.
*Job Purpose:*
To contribute to the profitability of the Organisation by providing an effective Engineering support to Production and Technology personnel.
*Requirements for Applicants*
*Educational:*
ND Mechanical Engineering. Preferred B-Tech Mechanical Engineering qualification.
*Experiential:*
Minimum 5 years’ experience in industrial Maintenance environment.
Hands-on experience in canned motor pumps, forced induction cooling towers, compressors, lifting equipment (hoists), centrifugal pumps, rotary feeders and agitators.
*Advantageous Factors:*
To contribute to the effectiveness of the organization by ensuring that the building and perimeters are properly repaired, maintained and cleaned.
*Additional Information*
Must be computer literate and have knowledge of Maintenance Management Information System (SAP or similar).
Knowledge of lifting machinery regulations, pressure equipment regulations
Equipment maintenance strategies.
*Key Performance Areas*
*Associated Tasks*
Plan and drive execution of day-to-day maintenance activities (e.g. breakdowns, repairs).
Plan and drive execution of shutdowns/outages/turnarounds.
Ensure preventative maintenance schedules are implemented in a timely and quality-focused manner.
Ensure repairs and modifications adhere to OEM and design standards, as well as meet statutory requirements.
Ensure availability of material, spares and resources.
Develop/update procedures for maintenance activities (e.g. refurbishing a pump, repairing cranes) and train Do-Maintenance team accordingly.
Must be computer literate and have knowledge of Maintenance Management Information System (SAP or similar).
Work within an empowered Maintenance Team.
Drive small maintenance projects.
*Salary market related.*
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1Xzc2OTBfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1136749&xid=1555_7690
2y
Save this search and get notified
when new items are posted!
