Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Results for electrical in Engineering & Architecture jobs in Eastern Cape
DutiesGood knowledge of Truck Mounted Cranes, Mobile Hydraulics, Welding, Hydraulic Hoses and Fittings, PTO's & Pumps.General manufacturing, fault finding and assembly.Electrical and mechanical knowledge will be advantageous.RequirementsMatric - Grade 12Drivers License (code B) essentialElectrical & Mechanical knowledgeBasic technical ability - reading a vernier - tools and equipment Knowledge of Commercial Vehicles, Hydraulics & Engineering will be advantageous.Applicant must reside in East London - South AfricaPlease send a comprehensive CV with a recent photo and contactable references to vacancyapplication74@gmail.comOnly short listed candidates will be interviewed
9d
Ads in other locations
1
SavedSave
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Skills and Knowledge Required
Preventative Maintenance Routines.
Welding (Mig Tig & Arc), Milling, and Turning.
Planning - Check that all part complies with procurement register and data pack.(Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
Drilling and/or slotting holes: Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Pneumatics and Hydraulics.
Gearboxes.
Water Systems and Cooling Towers.
Basic Electrical Experience.
Bearing and Shaft Changing.
Fault Finding and Diagnosis.
Lubrication.
Please forward your CV to megan@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004763/MM&source=gumtree
3h
1
SavedSave
Our client based in Brackenfell, Northern suburbs is seeking to employ candidates with assembling and electrical experience.
The position is mainly for assembling and repairing of Refirgeration equipment.
Able to learn for Troubleshoot, repair, or overhaul equipment such as, heat exchangers, other environmental changing devices, other mechanical equipment, or electronic components.
Execute the installation, maintenance, or repairing of refrigeration equipment at the client’s premises as and when the need arises on callouts.
Able to read gauges and instruments, and adjusts mechanisms such as valves, controls, and pumps to control level of fluid pressure and distribution in systems.
Execute soldering (brass, silver, copper), layout, and fitting of piping to industry standards.
Tests malfunctioning systems and components using electrical, mechanical, digital controls. and distribution in systems.
Requirements:
Grade 12 / Matric Certificate
Certificate: Electrical, Plumbing or Refrigeration (advantageous)
Welding experience (beneficial)
Must reside in Cape Town - able to commute to Brackenfell.
Send your CV to reception@personastaff.co.za
Persona Staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
reception@personastaff.co.za
3d
1
SavedSave
Qualifications• BEng Degree – Mechanical, Mechatronic, Industrial, Electrical or Electronic• Matric with at least 6 distinctions, or an average of 85% (Non-negotiable)
Responsibilities and duties will include:• Promote the company’s products/services addressing or predicting clients’ objectives• Prepare sales contracts ensuring adherence to law-established rules and guidelines• Develop goals for the development team and business growth and ensure they are met• Keep record of sales, revenue, invoices and travel itineraries• Provide trustworthy feedback and after-sales support• Develop a growth strategy focused both on financial gain and customer satisfaction• Conduct research to identify new markets and customer needs• Contact potential clients to establish a network and arrange meetings (Foreign and domestic)• Identify new markets and improve sales• Plan and oversee new marketing initiatives• Attend conferences, meetings, and industry-related eventsAdditional information
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMzE4MzE3Nzc/c291cmNlPWd1bXRyZWU=&jid=1752833&xid=331831777
3d
1
SavedSave
Our client in the Northern Suburbs is looking for a qualified Electrical Technician
to join their team.
Responsibilities:
Technical audits on properties
Examine under recoveries from a technical perspective.
Make technical drawings of metering reticulation of examined properties.
Installation of electrical metering equipment.
Calculate / forecast recoveries.
Stock management
General administrative tasks
Requirements:
A qualified electrician with at least N4 qualification.
At least 2 years metering related experience.
Fully bilingual (Afrikaans and English)
Excellent client service skills
Driverâ??s License
Timekeeping and planning
Good verbal and written skills
Computer literate
Deadline and goal orientated.
The ability to work under pressure.
To apply, please send your CV to hannah@personastaff.co.za
      Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful. Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Â
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004238/H&source=gumtree
3d
1
SavedSave
Salary: R15 000 – R20 000 basic plus on target commission, company car, laptop, cell phone and company contributions
My client, a distributor of electrical and mechanical equipment, used in industrial applications seeks a dynamic, intelligent and professional individual, able to forge strong personal client relationships.
Requirements:
Grade 12 / Matric
Qualification in Electrical or Mechanical Engineering, highly advantageous
Fluent in both Afrikaans and English
Excellent customer service and telephone etiquette
Computer literate and familiar with various computer applications
Drivers’ license
Experience:
Minimum of 3 years technical sales experience
Proven track record of successful client retention and growth.
Responsibilities:
Daily activity will be split 50/50 between developing new business and maintaining existing business. As time progresses, naturally a greater amount of the daily activity will be spent on maintaining customers.
To provide excellent technical advice with a high aptitude for all things
Must be target driven and motivated.
Ability to identify, assess, confront and resolve opportunities and challenges.
Able to handle high work load and long-term projects, managing client relationships while finding creative solutions to a wide scope of market requirements.
If you have read through and meet with the required criteria, then send your application together with relevant qualifications.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS85NTg2MzAxNzY/c291cmNlPWd1bXRyZWU=&jid=119325&xid=958630176
3d
1
SavedSave
Permanent position based in Somerset West for an Energy Specialist.
Requirements:
An Electrical Engineering Degree (BEng) (NQF 8)Strong track record with at least 10 years of experience in the Energy Sector
Functional expertise in the following areas:
Renewable Energy strategiesMarket entry assessments related to the Energy SectorEngineering, Procurement and Commercial Management of Energy Projects, Products and ServicesRenewable Energy Strategic options analysis, and financial modelsCommercial offers and Business Case CompilationSouth African Citizen
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMjc4MjY4NTk5P3NvdXJjZT1ndW10cmVl&jid=908463&xid=1278268599
3d
1
SavedSave
Our client based in the Northern Suburbs in the manufacturing industry is seeking a qualified Production Engineer to join their team.
Responsibilities:
Responsible for the planning of overall day to day production.
Management of production staff and all other related resources in the manufacturing system.
Develop daily or weekly production schedules to ensure that production deadlines are met.
Implement and maintain production processes and procedures that enhances productivity and efficiency.
Enforce regular housekeeping in the production facility.
Determine material, equipment, and labor requirements, prepare status and performance reports, and resolve production issues.
Provide weekly feedback to senior management on the progress of each job and proactively report all issues experienced.
Implement and maintain quality system that enhances and monitor the quality of all products produced.
Assist with administrative related duties to ensure all paperwork for jobs are done.
Requirements:
Matric / Grade 12.
National Diploma / BTech or BEng Mechanical or Industrial Engineering.
Electrical / Refrigeration experience advantageous
Minimum of 3-5 years’ similar experience
Own transport and valid license
Fully computer literate
Please send your application to hannah@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
For more information please contact:
Hannah Boast on hannah@personastaff.co.za
hannah@personastaff.co.za
3d
1
SavedSave
Our client is an innovative manufacturer of retail shop displays and furniture and they are looking to appoint a suitably qualified Mechanical Engineer to join their team.
Description of duties:
•Managing and overseeing the refrigeration and electrical division of the workshop.
•Act as support to the Production and Project Engineers.
•Assist with Technical design and drawing of all new and/or existing drawings as required in all departments.
•Improve, and develop design of existing processes, production units, machine parts, techniques and/or relevant components of plant machines.
•Assist and support maintenance team with the modification and correct application of mechanical changes to existing machinery.
•Accurate record keeping, issuing, and general control of all drawings at all times.
•Research of current / existing processes, machine parts, machine components, and/or techniques.
•Provide sound advice and support to R&D, Plant and Project engineers at all times.
•Costing, quoting and procurement of projects.
•Liaising with customers and site visits for project scoping and measurements
•Assist with mechanical design, development, review, documentation, and delivery.
•Project planning, updates, and reports.
Requirements:
•Matric / Grade 12.
•National Diploma / BTech or BEng Mechanical Engineering.
•Electrical / Refrigeration experience advantageous.
•Experience on Solid works & AutoCAD – Advantageous.
•Minimum of 3-5 years’ similar experience.
•Own transport and valid license.
•Fully computer literate.
Please send your application to craig@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
craig@personastaff.co.za
3d
1
SavedSave
Our client in the agricultural sector is seeking an Automation Technician to join their team. This role will report directly to the Technical Manager.
Duties & Responsibilities:
Development of AutoCAD drawings and design.
Assist with technical projects and Beta Sites as and when needed.
Assist with assembly.
Automation of irrigation dosing units.
Assist with controllers in cabinets with protection devices.
Assist with assembly of radio units.
Testing software and hardware.
Wiring of cabinets and panels
Troubleshooting of controller hardware and software.
Assist with telephonic support to dealers and end users.
On-Site support to dealers and end users â?? South Africa and SADC Countries.
Training on DF products, training dealers and end users on the correct usage of the automation equipment.
Assist with the servicing of filter banks and back flush controllers.
Requirements:
Matric certificate.
3+ years in a similar role.
Must have good communication skills in English and Afrikaans.
National diploma or degree in electronics/mechatronics.
Drivers license.
ELV electrical systems and VSD/PLC.
An understanding of hydraulics
AutoCAD knowledge.
Problem solving and organizational skills.
To apply, please send your CV with your salary expectations to craig@personastaff.co.za
 Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. By applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request our POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004599/CS&source=gumtree
3d
1
SavedSave
Our client in the agricultural sector is seeking an Automation Technician to join their team. This role will report directly to the Technical Manager.
Duties & Responsibilities:
Development of AutoCAD drawings and design.
Assist with technical projects and Beta Sites as and when needed.
Assist with assembly.
Automation of irrigation dosing units.
Assist with controllers in cabinets with protection devices.
Assist with assembly of radio units.
Testing software and hardware.
Wiring of cabinets and panels
Troubleshooting of controller hardware and software.
Assist with telephonic support to dealers and end users.
On-Site support to dealers and end users â?? South Africa and SADC Countries.
Training on DF products, training dealers and end users on the correct usage of the automation equipment.
Assist with the servicing of filter banks and back flush controllers.
Requirements:
Matric certificate.
3+ years in a similar role.
Must have good communication skills in English and Afrikaans.
National diploma or degree in electronics/mechatronics.
Drivers license.
ELV electrical systems PLC and VSC.
An understanding of hydraulics
AutoCAD knowledge.
Problem solving and organizational skills.
To apply, please send your CV with your salary expectations to hannah@personastaff.co.zaPlease note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. By applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request our POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004596/H&source=gumtree
3d
1
SavedSave
Our client in the agricultural sector is seeking an Automation Technician to join their team. This role will report directly to the Technical Manager.
Duties & Responsibilities:
Development of AutoCAD drawings and design.
Assist with technical projects and Beta Sites as and when needed.
Assist with assembly.
Automation of irrigation dosing units.
Assist with controllers in cabinets with protection devices.
Assist with assembly of radio units.
Testing software and hardware.
Wiring of cabinets and panels
Troubleshooting of controller hardware and software.
Assist with telephonic support to dealers and end users.
On-Site support to dealers and end users – South Africa and SADC Countries.
Training on DF products, training dealers and end users on the correct usage of the automation equipment.
Assist with the servicing of filter banks and back flush controllers.
Requirements:
Matric certificate.
3+ years in a similar role.
Must have good communication skills in English and Afrikaans.
National diploma or degree in electronics/mechatronics.
Drivers license.
ELV electrical systems and VSD/PLC.
An understanding of hydraulics
AutoCAD knowledge.
Problem solving and organizational skills.
To apply, please send your CV with your salary expectations to liza-nelle@personastaff.co.zaPlease note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. By applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request our POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004756/LN&source=gumtree
3d
1
SavedSave
The Senior Network Engineer will lead the network team of the telescope and will work alongside the Network Architect, Computing Infrastructure Lead, other domain specialists, project managers and system engineers, to ensure the networks for the telescope are fit for purpose, providing the quality needed for a system that will have to last, and be continually developed, for decades.
Key Responsibilities:
Work with the stakeholders to continually refine network requirements for the telescopes to ensure they meet the system requirements in an appropriate and cost-effective manner.Support the ongoing network design activities required for procurement.Develop the technical content of the network procurement packages once the designs have been agreed.Assist in the deployment and support of the telescope networks.Assist with security audits and risk assessments undertaken by specialists inside and outside of the organisation.Be an integral member of an international networking team.Provide updates and reports as necessary on the status of the network installation in South Africa.Travel, as required, to national and international meetings to represent the organization and the Computing and Software of South Africa in particular.Communicate openly, effectively, and respectfully with all staff, clients, and suppliers in the interests of good business practice, collaboration, and enhancement of the organization’s reputation.Adhere to the spirit and practice of the organization’s values as well as the Code of Conduct, Health, Safety and Environment procedures and policy, Diversity initiatives and Zero Harm goals.Undertake any other reasonable duties as directed.
Qualification and Experience:
Bachelor’s Degree in Computer Science, Information Systems, Information Technology or Electrical Engineering or equivalent qualifications.10 years’ experience in the architecture and design of large network systems with a demonstrable understanding of new and emerging networking and security technologies.Demonstrated experience of data centre networking technologies.Proven experience in the installation, optimisation and maintenance of network and security devices and services, and the ability to assure compliance with security policies and applicable legislation and regulations.A demonstrable understanding of Lean Principles, including the importance of customer focus and the minimisation of waste in business processes.Experience in a leadership position, or evidence of potential to fulfil a leadership position, promoting diversity and developing an inclusive, high-performing culture.
Knowledge and understanding of:
High performance computing environments...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNzA5NzI3MzM4P3NvdXJjZT1ndW10cmVl&jid=1287763&xid=2709727338
3d
1
SavedSave
Key Performance Areas:
Identify areas of improvement and applying SMART actions to meet requirements Turn-around time for analysis of failures as well as customer queries. Product development through engineering solutions.Requirements
National Senior Certificate / Matric BTech / BEng mechanical qualification1 - 3 years’ experience in a product development or processing environment Previous power transmission experience would be advantageous Hands on approach to manage work packages from customer enquiry to dispatch 3-5 years in industrial automation environment (Electrical control systems)
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODQzODQ0ODI5P3NvdXJjZT1ndW10cmVl&jid=1497781&xid=3843844829
3d
SavedSave
Client based on the East Rand has a vacancy for a Machine Tool Technician with Millwright Trade Test - MUST
come from Machine Tool industry
Trade Tested MillwrightMore than 4 years experience as Technician within the Machine Tool industrySolid Mechanical and Electrical experienceValid drivers licenseOwn vehicleExperience on various machinery i.e. Hand Held Lasers, XS Fiber Laser & Tube & Sheet Cutting Machines, CNC Plasma Cutting Machines, Milling Machines, CNC Milling Machines etc.Prepared to do field service duties and repairs on client sitesONLY apply if you meet ALL of the above requirements
Please consider your application unsuccessful if you do not hear from us within 2 weeks.
SECTOR: Engineering and Technical
Job Reference #: JHB000347/AH
3d
SavedSave
Electrica technician with a Metering Background. Please email CV to cv@orahenergy.co.za
5d
1
SavedSave
Automation Engineer - JHB
Our client is looking for an automation engineer with the following skills and qualifications:
Skills:
• 2-4 years experience in PLCs and SCADA systems
• Knowledge of PME/ PSO
• System Networking
• Working knowledge of Schneider Electric, Siemens, ABB and Eaton Automation Products
• Energy Management Systems
Qualifications:
• Minimum national diploma Electrical Engineering
• Project Management Certificate
• ECSA Registered (advantage)
• PME certification will added advantage
Salary = Market related, based on experience
Only South African Residents or individuals with a relevant South African work permit will be considered.
Please submit CV + Salary Requirements to Marlene on sales@servicesolutions.co.za
Consultant Name: Marlene Smith
2y
1
SavedSave
Automation Engineer - JHB
Our client is looking for an automation engineer with the following skills and qualifications:
Skills:
• 2-4 years experience in PLCs and SCADA systems
• Knowledge of PME/ PSO
• System Networking
• Working knowledge of Schneider Electric, Siemens, ABB and Eaton Automation Products
• Energy Management Systems
Qualifications:
• Minimum national diploma Electrical Engineering
• Project Management Certificate
• ECSA Registered (advantage)
• PME certification will added advantage
Salary = Market related, based on experience
Only South African Residents or individuals with a relevant South African work permit will be considered.
Please submit CV + Salary Requirements to Marlene on sales@servicesolutions.co.za
Consultant Name: Marlene Smith
2y
1
SavedSave
Automation Engineer - JHB
Our client is looking for an automation engineer with the following skills and qualifications:
Skills:
• 2-4 years experience in PLCs and SCADA systems
• Knowledge of PME/ PSO
• System Networking
• Working knowledge of Schneider Electric, Siemens, ABB and Eaton Automation Products
• Energy Management Systems
Qualifications:
• Minimum national diploma Electrical Engineering
• Project Management Certificate
• ECSA Registered (advantage)
• PME certification will added advantage
Salary = Market related, based on experience
Only South African Residents or individuals with a relevant South African work permit will be considered.
Please submit CV + Salary Requirements to Marlene on sales@servicesolutions.co.za
Consultant Name: Marlene Smith
2y
Ø Study Mechanical Equipment, sample parts, blueprints,
drawings, or engineering information to determine methods or sequences of
operations needed to machine / manufacture products.
Ø Set up, adjust and operate specialized equipment such
as Orbital machining equipment, Milling beds / cross slides with attachments,
Line boring equipment, Flange facing equipment, Grinding equipment with
attachments to perform precision On Site Machining operations.
Ø Setup and operate specialized equipment such as
Hydraulic Power Packs and Electrical Control Boxes for On Site Machining Operations
Ø Design / Manufacture fixtures, tooling, or parts to
meet special engineering needs for On Site Operations
Ø Set up, adjust and operate specialized machines such
as lathes, milling machines, boring mills or grinders to perform machining
operations.
Ø Align
and secure holding fixtures, cutting tools, attachments, accessories, or
materials onto machines.
Ø Program
/ set electronic and numerically controlled machines.
Ø Machine
the materials / components to specifications
Ø Monitor
equipment operation to ensure proper functioning
Ø Measure dimensions of completed products or workpieces
using precision instruments, such as dial indicators / micrometres to verify
conformance to specifications.
Ø Measure, examine, or test completed units to check for
defects and ensure conformance to specifications
Ø
Measure materials to mark
reference points, cutting lines, or other indicators.
Ø
Fit and assemble manufactured
or repaired parts.
Ø
Assemble / Disassemble machine
tools, parts, or fixtures.
Ø Establish
work procedures for fabricating new structural products, using a variety of
universal machines.
Ø Use
hand tools or power tools to examine for the assembling / fitting or
disassembling of components / equipment where needed
Ø Create
diagrams or sketches for workpieces or products.
Ø Performing
physical activities that require considerable use of your arms and legs and
moving your whole body, such as climbing, lifting, balancing, walking,
stooping, and handling of materials / equipment
Ø Operate
Light Delivery vehicles or mechanized equipment.
Ø Dispose
of scrap or waste material in accordance with company policies and
environmental regulations.Send your CV to sandiswa.shongwe@metalock.co.za
9d
Save this search and get notified
when new items are posted!
