Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for software engineer in Engineering & Architecture jobs in Cape Winelands
1
* Qualification in Mechanical, Electrical, Software or Mechatronics Engineering with 5 years’ experience in modern controls for robotics, ROS, navigation and planning, Python and C++. *
*Description:* A South African based company that does embedded software development for international partners requires a Senior Robotics Control System Engineer to join their growing team. Key duties will include: lead a remote controls team, developing and maintaining control systems for innovative robotic products; develop and design new prototype devices; familiarity with the software robotic operating system, system design and integration as well as linear/non-linear and optimal control system design techniques; design systems using mechanical, electrical design and software development skills; create requirements for control systems, failure modes and effect analysis.
*Key Requirements:* BSc or BTech in Mechanical, Electrical, Software or Mechatronics Engineering with at least 5 years’ experience in modern controls for robotics, ROS, navigation and planning. Demonstrated ability to lead a team essential. At least 5 years’ experience with Python and C++. Experience with modern controllers design techniques required.
*Additional Requirements:* The company requires independent and out-of-the box thinkers who can multitask, with excellent problem-solving skills. Excellent verbal and written communication skills. Detail oriented and a team player.
*Only candidates that meet all the requirements should apply
**Please quote “Senior Robotics Control System Engineer (W851)” in the subject line
***Only candidates that are shortlisted will be contacted
Should you comply with these requirements please email your CV to (cvs@scistaff.co.za)(mailto:cvs@scistaff.co.za) stating your current salary package as well as your salary expectations. By sending us your CV you consent that your information may be kept in accordance with the requirements of the POPI Act.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzMwNDE4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1204073&xid=1555_30418
2y
My client
provides services to operators of large utility scale solar projects. My client
has an opportunity for a Systems Technician/Technologist to join the team.
Job
Description:
The candidate
will be involved in the integration, testing and programming of weather
stations, as well as its
data quality.
The candidate will work with solar and other meteorological instruments, data
logging equipment,
software and
communication systems. Many of the sites to be supported are in remote
locations
internationally.
These activities include but are not limited to:
Data logger programming,
Remote technical support,
Data scrutinisation and quality control,
Design, building, assembly and testing of weather stations (office-based
system integration),
Interfacing weather station data loggers with various communication
protocols (e.g. Ethernet,
Modbus RTU
RS485, Modbus TCP/IP, RS232),
Factory acceptance testing of weather stations,
Trouble shooting, fault finding, maintenance, fixing and refurbishment of
equipment,
Monitoring, processing and reporting on data received from stations,
Create high quality project documentation like wiring diagrams, technical
manuals and acceptance
tests,
Minimum
requirements:
Good English proficiency,
Between 2 - 5 years’ work experience,
Knowledge of computer networks and communication,
Experience with SQL,
Programming skills (C, C++, CR-basic, Python, etc.),
MS Office proficient,
Valid driver’s licence,
Relevant qualification - National Diploma (or higher) in IT/ Computer/
Electronic or Mechatronic
Engineering.
The following
will be beneficial but not a requirement:
Previous exposure to data loggers and measurement instruments.
Previous remote outdoor site work (although this is mostly an office-based
position).
Advanced excel proficiency,
Managing a technical support ticket system,
Preference will be given to candidates who currently reside within the
Western Cape.
The candidate
that we are looking for will have the following characteristics:
Interest in renewable energy
Meticulous attention to detail
Self-motivated to 100% task completion
Proactive problem-solver
Disciplined work ethic
Strong independent worker
Hands-on / practical
Applications
without the following information will be rejected:
Detailed CV and photo (include previous work experience, even if casual
work e.g., waiter work, sales
assistance,
etc.).
All academic records and matric results.
At least two references (with main and alternative contact numbers and
email address) – more than
two
references are preferred.If you meet
the requirements, please send your CV with availability and salary expectations
to hrkonsult@live.co.za.
1mo
Ads in other locations
1
SavedSave
Our client in wastewater systems are looking for a Engineering designer.Designers take a central role in the delivery of projects. Designers are directly responsible for the Quality, Creativity and Delivery of the projects they are overseeing. It is a role that requires attention to detail and a deep understanding of the products and services offered by the Company and its competitors. A Designer is expected to act with the highest moral and ethical standards, in a trustworthy manner whilst also protecting the intellectual property, goodwill and confidentiality of the company’s information and methodologies. Successful execution of the role of a Designer is subject to the roles and responsibilities assigned to this individual, is based on the achievement of performance KPIs, and the diligent and timeous execution of the roles and responsibilities assigned to the Design Lead. Each function assigned to the Designer carries an important contribution to the success of the business and the goal of being market leading in every way and achieving the highest standards of quality and service.The key areas of focus and a detailed understanding of the role include, but is not limited to CAD Design, Manufacturing and Business Development.Duties:1. Preparation of design related material for Proposals and Costings;2. Engineering Interaction;3. Design planning based on project/system requirements;4. Creating, implementing and maintaining the Design and Development ISO document system;5. Ensuring designs are executed according to information issued and quality standards;6. Provides detailed engineering information by answering questions and requests;7. Provides cost effective innovative solutions;8. Completes projects in an efficient and timely manner;9. Contributes to team effort by accomplishing related results as needed;10. Ensuring the dedicated design server & software subscriptions are maintained accordingly;11. Creating accurate detailed designs for manufacturing by the Company and/or contractor;MINIMUM REQUIREMENTSQUALIFICATIONS :National Senior Certificate (NSC),Mechanical Engineering Qualification or equivalentEXPERIENCE :3-5 Years’ Experience in the Water Treatment Products and Services offered by the Company;Understanding of Water Treatment Products and Services offered by the Company;Understanding of Water Treatment Products and Services and ancillary technologies, products and methodologies;Computer literate and intermediate with Microsoft Suite and Computer Aided Design (CAD) Software;Appropriate training and certifications with respect to Computer Aided Design (CAD) software;Appropriate understanding of the manufacturing processes required by the Company;REQUIREMENTS & SKILLS :Code B Drivers’ License, CAD Software, Concept Development, Problem Solving, Project Management, Focus, Planning, Creativity , Attention to Detail, Innovation, Time Management, Working under pressure and Leadership.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzM1ODc4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1121648&xid=1266_35878
2y
1
SavedSave
*Job Description*
We have an amazing opportunity for a SQL and C# Web-based Developer, at our client based in Cape Town. The leader in Warehouse Management Software System Specialist who pioneered one of the first logistics and warehouse management systems in South Africa; designed specifically for the South African market.
* *Duties and responsibilities*
Developing and maintaining business (ERP) software. This includes functions to manage inventory and operator performances.
* Develop new features for clients.
* Full time support
* Report back to office
* Weekly Reports
* Client management
* Java integration
* Provide first hand support to clients
* Test and Deploy updates to the live system
* .Net, SQL and frameworks like Microsoft Azure
*We Require a Candidate With*
* 4+ years of experience
* Communication must be excellent
* C#/bootstrap, angular and current JS libraries in development, and SQL server as main DB engine
* This includes functions to manage inventory and operator performances.
R 35 000 - R 45 000
*We Require a Candidate With*
* 4+ years of experience
* Communication must be excellent
* C#/bootstrap, angular and current JS libraries in development, and SQL server as main DB engine
* This includes functions to manage inventory and operator performances.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzE4MzFfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1134094&xid=1555_1831
2y
1
SavedSave
*Reference: JHB001177-AV-1*
Trade tested + N6 Technician (Instrumentation, Millwright, Electrician) sought by high pressured manufacturing company based in Cape Town. Min 2 years’ experience in the Automotive or Robotic environment. MUST have hands on knowledge of PLC and SCADA systems, scales, speed drives, pneumatic, electrical, instrumentation, and hydraulics. Must be able to work well in a team.
*Minimum requirements:*
* Grade 12 or equivalent
* Appropriate engineering qualifications (trade test + N3 and N6) Instrumentation, Millwright, Electrician
* MERSETA qualification preferred.
* Minimum 2 years’ experience in the Automotive or Robotic environment, after obtaining qualifications as a technician with focus on the following:
* Knowledge of Omron HMI, PLC Software
* Knowledge of Yaskawa Inverter Drives
* Hands on knowledge of PLC and SCADA systems.
* Experience with scales, speed drives, pneumatic, electrical, instrumentation, and hydraulics.
* Must be able to read and update electrical drawings.
* Experience with electrical power distribution (medium and low voltage).
* Knowledge of safety checks on mechanical equipment in accordance with OHSA.
* Ability to work under pressure.
* Ability to read drawings.
*Candidate will be responsible for:*
* Monitor and adjust when necessary, plant set points to ensure effective and efficient running of plants.
* Inspection of all electrical and mechanical equipment on Bakery Site
* Monitor and inspect plant for potential and existing defects
* Carrying out of scheduled preventative maintenance on electrical and mechanical equipment
* Fault finding and repairs on electrical on electrical and mechanical equipment
* Installation and project work as required
* Perform standby on a rotational basis
* Work overtime as a result of breakdowns and planned maintenance when required.
* Check report, books daily and liaise with Maintenance Manager on action to be taken on reported defects
* Report any defects noticed while performing normal functions
* Perform breakdown functions on electrical and mechanical equipment at the Bakery
R 550 000 - 600 000 - Annually
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzM2NDBfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1135074&xid=1555_3640
2y
1
SavedSave
An excellent opportunity has become available to join a leader within the medical device industry, as a Design Engineer. The role is based in the Cape Town.
* Research, concept development, product design and development
* Manufacturing of device concepts
* Testing of device concepts
* Liaising with suppliers and 3rd parties for manufacturing of components (custom mechanical parts, tooling, stock parts, etc.)
* Setup test protocols and orderly documenting of all developments/experiments run
* Verification testing
* Test protocol writing
* Test report writing
* Compliance with medical device regulatory requirements
* B.Eng or BSc.Eng in Mechanical/Biomedical Engineering
* 2+ years’ experience design experience, preferably within the medical device field
* Proficient in 3-D CAD software (preferably Solidworks)
* Can work independently and within a team
* Good communication skills (verbal and written)
* B.Eng or BSc.Eng in Mechanical/Biomedical Engineering
* 2+ years’ experience design experience, preferably within the medical device field
* Proficient in 3-D CAD software (preferably Solidworks)
* Can work independently and within a team
* Good communication skills (verbal and written)
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzM4OTlfXzQ5Nz91dG1fc291cmNlPWd1bXRyZWUmdXRtX21lZGl1bT1mZWVkJmtleXdvcmQ9&jid=1132473&xid=1555_3899
2y
1
SavedSave
Our client in wastewater systems are looking for a Engineering designer.Designers take a central role in the delivery of projects. Designers are directly responsible for the Quality, Creativity and Delivery of the projects they are overseeing. It is a role that requires attention to detail and a deep understanding of the products and services offered by the Company and its competitors. A Designer is expected to act with the highest moral and ethical standards, in a trustworthy manner whilst also protecting the intellectual property, goodwill and confidentiality of the company’s information and methodologies. Successful execution of the role of a Designer is subject to the roles and responsibilities assigned to this individual, is based on the achievement of performance KPIs, and the diligent and timeous execution of the roles and responsibilities assigned to the Design Lead. Each function assigned to the Designer carries an important contribution to the success of the business and the goal of being market leading in every way and achieving the highest standards of quality and service.The key areas of focus and a detailed understanding of the role include, but is not limited to CAD Design, Manufacturing and Business Development.Duties:1. Preparation of design related material for Proposals and Costings;2. Engineering Interaction;3. Design planning based on project/system requirements;4. Creating, implementing and maintaining the Design and Development ISO document system;5. Ensuring designs are executed according to information issued and quality standards;6. Provides detailed engineering information by answering questions and requests;7. Provides cost effective innovative solutions;8. Completes projects in an efficient and timely manner;9. Contributes to team effort by accomplishing related results as needed;10. Ensuring the dedicated design server & software subscriptions are maintained accordingly;11. Creating accurate detailed designs for manufacturing by the Company and/or contractor;MINIMUM REQUIREMENTSQUALIFICATIONS :National Senior Certificate (NSC),Mechanical Engineering Qualification or equivalentEXPERIENCE :3-5 Years’ Experience in the Water Treatment Products and Services offered by the Company;Understanding of Water Treatment Products and Services offered by the Company;Understanding of Water Treatment Products and Services and ancillary technologies, products and methodologies;Computer literate and intermediate with Microsoft Suite and Computer Aided Design (CAD) Software;Appropriate training and certifications with respect to Computer Aided Design (CAD) software;Appropriate understanding of the manufacturing processes required by the Company;REQUIREMENTS & SKILLS :Code B Drivers’ License, CAD Software, Concept Development, Problem Solving, Project Management, Focus, Planning, Creativity , Attention to Detail, Innovation, Time Management, Working under pressure and Leadership.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzM1ODc4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1121648&xid=1266_35878
2y
1
Without land there are no projects and without you there is no land!
*Is this you?*
You’re able to demonstrate a win/win mindset and personal integrity, whilst building strategic relationships with internal and external project stakeholders. You have a high standard of written and verbal communication when it comes to infrastructure project stakeholders; it’s a different type of lingo and you’ve heard it all.
*What you’ll be doing (and why you’ll enjoy it)*
You will identify suitable properties and then get involved in the attainment and maintenance to secure those development rights that are needed to start the project development process. You will be involved in liaising with Project Managers, conducting the necessary research to identify the landowners and supporting on introductory calls with landowners to arrange site visits.
Part of your role will be aiding the negotiation process with landowners as well as assisting with the conceptualisation, drafting and execution of related agreements. Weekly progress reports will be needed, as well as the paper trail you know so well to keep.
*Where you’ll be doing it*
You will join a renewable energy leader with a number of technologies within their portfolio; wind, solar and hybrid projects. Cape Town will be your home with required business related travel.
*What you’ll need*
Your negotiating skills alongside a degree and at least 2 years of commercial experience, with proven success in a similar role are non-negotiable. Naturally, you would have experience with GIS software and things like Google Earth to find what you need to move the process along. It will be an advantage for you to have renewable energy experience already, particularly in wind or solar (utility scale).
*What’s in it for you*
The opportunity to join a well-established international renewable energy leader, that offers financially stability, values their employees and boasts an environment that views you as more than just a number.
*How to apply*
For a confidential discussion please contact Kayley Gordon on (021) 035 1433 or send your CV to (k.gordon@thetalentexperts.co.za)(mailto:k.gordon@thetalentexperts.co.za)
We appreciate that your CV might not be fully up to date. No problem just send us what you have.
We do respond to everyone! Just give us a few days to work through your application.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzY3MTM4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1260331&xid=1555_67138
2y
1
SavedSave
We are looking for a Cisco Certified Network Professional Engineer to work for a contract role in Cape Town.
* Network Security
* Collaboration Security
* Vulnerability Management Security
* Ability to work under supervision of more experienced security engineers but must be able to use some discretion.
* Ability to coordinate and prioritize workloads assigned to the engineer.
* Very good problem-solving skills across all endpoints and network resources in terms of patching, vulnerabilities and threats.
* Very good understanding of security issues associated with operating systems, networking, and virtualization software, 0365 applications and identity and access management.
* Very good IT technical knowledge of wired network and cloud computing.
* Very good knowledge of cybersecurity across all the security service areas.
* Good understanding of hacking and how to identify and detect and perform remediation.
* High level of adaptability as priorities and threat landscape changes.
* Have a good awareness and in depth understanding of security standards and best practices.
* Good understanding and be able to articulate security concepts verbally and in written format.
* Ability to provide assistance and technical guidance to lower-level resources.
* Very good ability to examine technical issues relating to security incidents.
* Ability to collaborate and work as a part of a team.
* Ability to be self-managed, ethical and honest.
* Ability to be respectful and seek to build relationships.
* Good presentation skills.
* Good reporting skills.
* Excellent communication skills.
* Cisco CCNP Certification (either Routing & Switching, Collaboration or Security, preferably Security).
* 3 years of experience in policy configurations, integrations, deployments, management and troubleshooting of:
1) Cisco Firepower Next-Generation Intrusion Prevention Systems
2) ASA
* 3 years of experience and expertise in the Cisco Web and Video Conferencing; and
* 3 years of experience in the implementation, configuration, support and management of the Cisco Identify Services Engine including architecture.
Market related rate per hour.
* Cisco CCNP Certification (either Routing & Switching, Collaboration or Security, preferably Security).
* 3 years of experience in policy configurations, integrations, deployments, management and troubleshooting of:
1) Cisco Firepower Next-Generation Intrusion Prevention Systems
2) ASA
* 3 years of experience and expertise in the Cisco Web and Video Conferencing; and
* 3 years of experience in the implementation, configuration, support and management of the Cisco Identify Services Engine including architecture.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzY5MTk4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1264152&xid=1555_69198
2y
1
SavedSave
As an IT Onsite Support Technician, you are responsible to provide onsite/remote assistance as well as attend to dispatch enquiries when required by a client in the Johannesburg area. You will act as the primary onsite liaison between the company and the client. You will be required to attend to the day-to-day general IT support queries within reason. You will also be responsible to maintain SLAs and being Numatas primary contact and representation onsite.
* Act as a brand ambassador for Numata.
* Provide remote and on-site 1st line support to our clients.
* Act as the primary onsite liaison between the company and the customer.
* Providing exceptional service to internal and external customers.
* To assist with monitoring client networks daily, ensuring appropriate action is taken to remedy faults identified.
* To take ownership of routine checks and maintenance on client networks and the IT environment.
* To keep abreast of modern technologies.
* Troubleshoot computer problems and determine the source, and advise on or perform appropriate corrective action, onsite and remotely.
* Thoroughly and timely document incidents and resolutions in the company PSA, following standard operational procedures.
* Assist with project-based work when required.
* Engage and coordinate with 3rd party vendors (i.e. DELL; HP) to resolve/ complete open incidents or projects.
* Provide guidance and training to customer personnel, empowering the users.
* Perform a variety of maintenance, evaluation, installation, and training tasks to ensure the core IT Infrastructure performance meets client and user requirements.
* Provide support to clients on all supported applications.
* Report any ongoing or unresolved problems, or suggestions to improve service delivery to your Team Leader.
* Supervise all 3rd party product installations and the related repair and maintenance activities when required on site.
* Responsible for the installation, layout, and maintenance of all network components.
* Prioritize incidents and the capturing of time entries, working independently.
* Basic reading, writing, and arithmetic skills required. This is normally acquired through a high school diploma or equivalent.
* Knowledge of a range of computer networking systems and languages
* Knowledge of computing and network hardware and peripheral equipment. Ability to communicate technical information to non-technical personnel. Ability to install, configure, and maintain personal computers, networks, and related hardware and software. Knowledge of federal copyright laws as they pertain to the use of computer software. Knowledge of computer and/or network security systems, applications, procedures, and techniques. Ability to identify and resolve computer system malfunctions and operational problems. Skill in organizing resources and establishing priorities. Ability to provid
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzY3OTQxX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1262303&xid=1555_67941
2y
1
SavedSave
*Become more at Entelect, one of SA’s leading software engineering and solutions companies, voted the Best Company to Work For.*
When you join Entelect, you’re not just joining a leading software development company, you become part of something bigger. You become part of a team of ambitious, confident, motivated and smart people, who will inspire you to go further, to do more than you thought possible.
You become part of a company that sees potential: potential in our clients, potential in our products and potential in you. Because we believe that if we give you everything you need to be successful, you will be. That you will become more and do great things.
As an Entelect Software Engineer working on a Java stack, you’re basically a wizard. You’re fast becoming a master at Spring, Java EE, Javascript frameworks such as Angular or React and your ORM of choice (Hibernate or perhaps, MyBatis). You’re comfortable creating applications for web, desktop and mobile. But we’re all wizards here, so you’re in good company.
*What we’ve worked on lately*
* At Entelect, we’re working on more than 80 projects at any given time. Here are some to whet your appetite:
* Building loyalty platforms designed to drive consumer behaviour and help improve the health and wellness of South Africans.
* Designing and developing high-performance web applications that enable multinational organisations to track risks, including fraud and white collar crime, across the globe, in real time.
* Developing software for a surgical skill simulation portal that measures surgical skill proficiency; enabling trainee surgeons to practice, track and measure their skills remotely.
* Imagining, designing and implementing an Android app for an agricultural company to help agronomists and sales agents share valuable data in real time; optimising smart agriculture solutions in an industry that is highly susceptible to minor fluctuations in conditions.
* Helping one of South Africa’s largest vehicle fleet management companies accurately price project costs for hundreds of specialised vehicles, down to the cents per kilometre, to provide more competitive products to consumers.
* Developing reliable processes, visual dashboards and tracking tools to monitor the delivery of schoolbooks across South Africa.
* Learning and implementing complex tax and duty tracking tools that enable the world’s largest commodity traders to operate in multiple markets.
*What you’ll actually be doing*
* Joining a company with over 20 years’ experience in software craftsmanship; a company known for hiring, continuously growing, and retaining the best people in the industry.
* Working with teams with a common goal: to solve complex business problems, to drive excellence and to make an impact, while pushing yourself and others to become more.
* Using your knowledge and experience to develop world-class, high-quality web and mobile applications for some of th
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI2MTE5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1191319&xid=1555_26119
2y
1
*Become more at Entelect, one of SA’s leading software engineering and solutions companies, voted the Best Company to Work For.*
When you join Entelect, you’re not just joining a leading software development company, you become part of something bigger. You become part of a team of ambitious, confident, motivated and smart people, who will inspire you to go further, to do more than you thought possible.
You become part of a company that sees potential: potential in our clients, potential in our products and potential in you. Because we believe that if we give you everything you need to be successful, you will be. That you will become more and do great things.
As a Team Lead at Entelect, you would be required to have a strong technical background, staff and client management skills, and need to take an active role in company-wide initiatives. You will be responsible for the delivery on a project, which involves project, account and team management, which can comprise software engineers, business analysts and testers. In other words you are required to be a ninja but we’re all ninjas here, so you will be in good company.
*What we’ve worked on lately*
At Entelect, we’re working on more than 80 projects at any given time. Here are some to whet your appetite:
* Building loyalty platforms designed to drive consumer behaviour and help improve the health and wellness of South Africans.
* Designing and developing high-performance web applications that enable multinational organisations to track risks, including fraud and white collar crime, across the globe, in real time.
* Developing software for a surgical skill simulation portal that measures surgical skill proficiency; enabling trainee surgeons to practice, track and measure their skills remotely.
* Imagining, designing and implementing an Android app for an agricultural company to help agronomists and sales agents share valuable data in real time; optimising smart agriculture solutions in an industry that is highly susceptible to minor fluctuations in conditions.
* Helping one of South Africa’s largest vehicle fleet management companies accurately price project costs for hundreds of specialised vehicles, down to the cents per kilometre, to provide more competitive products to consumers.
* Developing reliable processes, visual dashboards and tracking tools to monitor the delivery of schoolbooks across South Africa.
* Learning and implementing complex tax and duty tracking tools that enable the world’s largest commodity traders to operate in multiple markets.
*What you’ll actually be doing*
* Joining a company with over 20 years’ experience in software craftsmanship; a company known for hiring, continuously growing, and retaining the best people in the industry.
* Working with teams with a common goal: to solve complex business problems, to drive excellence and to make an impact, while pushing yourself and others to become more.
* Using your k
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzI2MTE2X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1191318&xid=1555_26116
2y
1
SavedSave
Our client in the manufacturing industry is seeking a qualified Junior Draughtsman to join their team. The primary role of the Draughtsman is to provide working drawings and additional supplementary information to facilitate the design, manufacture and installation of bespoke joinery and metalwork.
Responsibilities:
Responsibilities include gathering drawings and specifications, calculating material and setting up production methods.
Preparing, reviewing and redrafting alongside project teams.
Create detailed designs with computer-aided design software.
Assist with Production Planning
Assisting with programming of machines
Ensure regular housekeeping activities are execute and the execution of Standard Operating Procedures.
Ensure efficient loading and unloading of sheet metal parts into and from Bending Machine
Requirements:
Matric / Grade 12.
National certificate OR Diploma in Drafting.
Minimum of 1-3 yearsâ?? similar experience as a draughtsman
Joinery / furniture design experience
Valid driverâ??s license with own transport.
Experience with Solidworks and CAD software
Must have exposure to the following:
Sheet Metal Manufacturing including laser cutting, bending, and welding
Process Design
Been involved in the test phase.
Been involved in the manufacturing phase.
Staff and production management
Please send your application to hannah@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004705/H&source=gumtree
5d
1
Electronic/ computer/software engineers required. Cape Town based Company. DSP engineer with software skills.DSP Engineer Cape TownThe company has expertise in areas of RF, mixed-signal, high-performance computing and high-bandwidth data storage. DSP-based radio solutions are developed in-houseDSP Engineered required to build the tam for new Projects.Qualification:BSc / BEng or higher qualified. (Degree/ Masters in Electronic Engineering, Computer Engineering Mechatronic Engineering)Responsibilities:Programming/ development on Microsoft Visual C++ Visual DSPC, C++ and assembler development on Analog Devices DSPs and Intel and micro processorsWorking on open-source and commercial third-party libraries
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzUwMDg1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1189546&xid=1266_50085
2y
1
SavedSave
Our client in the agricultural sector is seeking an Automation Technician to join their team. This role will report directly to the Technical Manager.
Duties & Responsibilities:
Development of AutoCAD drawings and design.
Assist with technical projects and Beta Sites as and when needed.
Assist with assembly.
Automation of irrigation dosing units.
Assist with controllers in cabinets with protection devices.
Assist with assembly of radio units.
Testing software and hardware.
Wiring of cabinets and panels
Troubleshooting of controller hardware and software.
Assist with telephonic support to dealers and end users.
On-Site support to dealers and end users â?? South Africa and SADC Countries.
Training on DF products, training dealers and end users on the correct usage of the automation equipment.
Assist with the servicing of filter banks and back flush controllers.
Requirements:
Matric certificate.
3+ years in a similar role.
Must have good communication skills in English and Afrikaans.
National diploma or degree in electronics/mechatronics.
Drivers license.
ELV electrical systems and VSD/PLC.
An understanding of hydraulics
AutoCAD knowledge.
Problem solving and organizational skills.
To apply, please send your CV with your salary expectations to craig@personastaff.co.za
 Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. By applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request our POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004599/CS&source=gumtree
6d
1
SavedSave
Permanent position for a Chief Engineer Manager based in Somerset West, Cape Town.
Minimum Requirements:
South African CitizenMinimum degree in Mechanical Engineering (BEng or BScEng), with a postgraduate degree (Masters) in Mechanical Engineering (MEng or MScEng) preferred.Technical team management experience required with a management qualification preferred.Minimum 10 years relevant experience in Mechanical Engineering.Minimum 5 years experience in a high tech industryAdvanced simulation capabilities (FEA packages, Matlab, etc.)Advanced mechanical design capabilities using 3D Design (Solid Works / Solid Edge) and PLM (Team Center) software packages.Experience in Project Management and Problem Solving.Strong leadership qualities, and the ability and experience in managing a technical team.An advanced level of computer literacy is essential, i.e. design and data analysis software.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMjEyNTAxNzY1P3NvdXJjZT1ndW10cmVl&jid=456746&xid=3212501765
8d
1
SavedSave
The Senior Network Engineer will lead the network team of the telescope and will work alongside the Network Architect, Computing Infrastructure Lead, other domain specialists, project managers and system engineers, to ensure the networks for the telescope are fit for purpose, providing the quality needed for a system that will have to last, and be continually developed, for decades.
Key Responsibilities:
Work with the stakeholders to continually refine network requirements for the telescopes to ensure they meet the system requirements in an appropriate and cost-effective manner.Support the ongoing network design activities required for procurement.Develop the technical content of the network procurement packages once the designs have been agreed.Assist in the deployment and support of the telescope networks.Assist with security audits and risk assessments undertaken by specialists inside and outside of the organisation.Be an integral member of an international networking team.Provide updates and reports as necessary on the status of the network installation in South Africa.Travel, as required, to national and international meetings to represent the organization and the Computing and Software of South Africa in particular.Communicate openly, effectively, and respectfully with all staff, clients, and suppliers in the interests of good business practice, collaboration, and enhancement of the organization’s reputation.Adhere to the spirit and practice of the organization’s values as well as the Code of Conduct, Health, Safety and Environment procedures and policy, Diversity initiatives and Zero Harm goals.Undertake any other reasonable duties as directed.
Qualification and Experience:
Bachelor’s Degree in Computer Science, Information Systems, Information Technology or Electrical Engineering or equivalent qualifications.10 years’ experience in the architecture and design of large network systems with a demonstrable understanding of new and emerging networking and security technologies.Demonstrated experience of data centre networking technologies.Proven experience in the installation, optimisation and maintenance of network and security devices and services, and the ability to assure compliance with security policies and applicable legislation and regulations.A demonstrable understanding of Lean Principles, including the importance of customer focus and the minimisation of waste in business processes.Experience in a leadership position, or evidence of potential to fulfil a leadership position, promoting diversity and developing an inclusive, high-performing culture.
Knowledge and understanding of:
High performance computing environments...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNzA5NzI3MzM4P3NvdXJjZT1ndW10cmVl&jid=1287763&xid=2709727338
8d
1
SavedSave
Our client is an innovative manufacturer of retail shop displays and furniture and they are looking to appoint a suitably qualified junior draughtsman to join their team. The primary role of the Draughtsman is to provide working drawings and additional supplementary information to facilitate the design, manufacture and installation of bespoke joinery and metalwork.
Description of duties:
Responsibilities include gathering drawings and specifications, calculating material and setting up production methods.
Preparing, reviewing and redrafting alongside project teams.
Create detailed designs with computer-aided design software.
Assist with Production Planning
Assisting with programming of machines
Ensure regular housekeeping activities are execute and the execution of Standard Operating Procedures.
Ensure efficient loading and unloading of sheet metal parts into and from Bending Machine
Requirements:
Matric / Grade 12.
National certificate OR Diploma in Drafting.
Minimum of 1-3 years’ similar experience as a draughtsman
Joinery / furniture design experience
Valid driver’s license with own transport.
Experience with Solidworks and CAD software
Must have exposure to the following:
Sheet Metal Manufacturing including laser cutting, bending, and welding
Process Design
Been involved in the test phase.
Been involved in the manufacturing phase.
Staff and production management
Please send your application to julia@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004719/JH&source=gumtree
8d
1
SavedSave
Our client is seeking a Mechanical Draughtsman to join their team based in the Northern Suburbs.
Responsibilities:
Dive into the world of sheet metal drawings, sculpting flat patterns for laser cutting and bending with the finesse of a culinary artist.
Become the maestro of the AMADA bending machine, orchestrating bending sequences with specialized software to perfection.
Take the lead in completing thrilling projects, from sizzling oven designs to the slickest bread slicers, ensuring every detail is as delicious as the last bite.
Channel your inner architect as you update and model assemblies in AutoCAD and SolidWorks, breaking down structures with surgical precision.
Dance with dimensions in layout drawings, crafting masterpieces that dazzle our marketing mavens and satisfy our engineering virtuosos.
Transform visions into reality with machine drawings that leave no bolt unturned, ensuring our engineers have the blueprints to bring dreams to life.
Keep the gears turning smoothly by updating cutting lists with meticulous care, ensuring every detail is as sharp as a chefs knife.
Requirements:
A hearty serving of Grade 12 education.
Your trusty steed (aka your own car) and a valid license for adventures beyond the drafting table.
Mastery of the tools of the trade: AutoCAD and SolidWorks.
A seasoning of sheet metal bending experience, adding flavor to your drafting repertoire.
A knack for laser cutting drawings and nestingâ??s, ensuring every piece fits together like a perfect recipe.
To apply, please send your CV to hannah@personastaff.co.za
   Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004706/H&source=gumtree
8d
1
SavedSave
Join the Heartbeat of Food Innovation!Are you a master of precision, a wizard of design, and a trailblazer in the world of mechanical drafting? If so, weve got an opportunity thats sizzling hot and ready to be served on your career plate!Our client, a pioneering force in the food manufacturing industry, is on the hunt for a Mechanical Draughtsman to ignite their team with creativity and technical prowess. As a key player in our dynamic crew, youll be crafting the blueprints that bring our cutting-edge equipment to life, shaping the future of food production with every stroke of your pen (or click of your mouse).
Duties & Delights:
Dive into the world of sheet metal drawings, sculpting flat patterns for laser cutting and bending with the finesse of a culinary artist.
Become the maestro of the AMADA bending machine, orchestrating bending sequences with specialized software to perfection.
Take the lead in completing thrilling projects, from sizzling oven designs to the slickest bread slicers, ensuring every detail is as delicious as the last bite.
Channel your inner architect as you update and model assemblies in AutoCAD and SolidWorks, breaking down structures with surgical precision.
Dance with dimensions in layout drawings, crafting masterpieces that dazzle our marketing mavens and satisfy our engineering virtuosos.
Transform visions into reality with machine drawings that leave no bolt unturned, ensuring our engineers have the blueprints to bring dreams to life.
Keep the gears turning smoothly by updating cutting lists with meticulous care, ensuring every detail is as sharp as a chefs knife.
Requirements for Entry:
A hearty serving of Grade 12 education.
Your trusty steed (aka your own car) and a valid license for adventures beyond the drafting table.
Mastery of the tools of the trade: AutoCAD and SolidWorks.
A seasoning of sheet metal bending experience, adding flavor to your drafting repertoire.
A knack for laser cutting drawings and nesting’s, ensuring every piece fits together like a perfect recipe.
If youre hungry for a challenge, thirsty for innovation, and ready to roll up your sleeves to shape the future of food manufacturing, then we want to hear from you! Join us in our quest to blend artistry with engineering precision, and lets cook up something truly extraordinary together.To apply, please send your CV to natasha@personastaff.co.za
Persona staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004700/N&source=gumtree
8d
Save this search and get notified
when new items are posted!