Please note that our Terms & Conditions and Privacy Notice are applicable.
Filter & refine
Clear All
Results for blow off valve adapter in "blow off valve adapter" in South Africa in South Africa
1
This original Garrett-made turbocharger is for all Golf 7 R and GTI, Audi TT, Polo GTI 6C, Skoda Octavia RS, Seat Leon FR and most other 1.8 TFSI / 2.0 TFSI.
Performance: up to 600 hp
PowerMax™ direct fit performance turbocharger kits are engineered for increased engine performance while maintaining OEM direct fitment. With professional engine calibration and tuning, the optimized compressor aero will increase flow and outperform the stock turbocharger.
Designed for extreme performance, this upgrade turbocharger is actually neither an upgrade nor a hybrid turbocharger. All components of the turbocharger are extremely high quality and made from the finest materials. In addition to the compressor housing made especially for this turbocharger, an exhaust housing made of high-strength stainless steel with a greater exhaust gas throughput is used. The latest technology comes to the fore under the housings. The highlight is an extremely high-quality reverse rotating Garrett G25-660 center section with a MAR-M exhaust wheel designed for exhaust temperatures of up to 1050 ° C.
The compressor housing was designed in such a way that most of the tuning items available as accessories can be used. For example, the electric Turbosmart blow-off valves fit the turbocharger without changes and can simply be attached to the holes provided. The intake opening in front of the compressor wheel is perfectly matched to the turbocharger and is supplied together with a matching inlet, which enables accessory intake systems to be easily attached.
The exhaust housing has an increased exhaust gas throughput and has been specially manufactured for the high-quality Garrett fuselage group. A stainless steel with a strength of 1050 ° C was chosen as the material. The duct routing is adapted to the performance and flow-optimized. Another advantage: all downpipes fit to the outlet of the exhaust housing.
Special feature: You can keep your old turbocharger. This allows you to restore the vehicle to its original condition if necessary. Ultimately, that saves a lot of time and money. You do not then have to buy a new and therefore expensive turbocharger.
Vehicle: 2014 - 2018 Volkswagen / Audi 2.0L TSI MK7
Engine: 1.8/2L MQB GEN3 EA888
Part Number/s
IS38
Comparison Number/s
06K145874P
06K145874G
06K145722S
06K145722N
Features:
Direct-Fit Stage 2 Upgrade
calibrated electric actuator
Complete assembly with all ancillary components for OE fitment
600 flywheel horsepower capability (on-vehicle results)
+59% flow compared to IS38 turbo (stock Golf R)
G-Series compressor wheel aerodynamics for maximum horsepower
Modern gasoline turbine wheel aerodynamics
Mar-M alloy turbine wheel rated for up to 1050C
Stainless steel turbine housing rated for up to 1050C
Fully machined speed sensor port
Dual ceramic ball bearing cartridges
Twin piston rings at compressor and turbine site
max. Turbo speed: 165.000 rpm
Rotation: Reverse
6mo
4
Blow Off Valve / Dump Valve kit for Audi VW 2.0T FSI TSI Engines - Turbo Replacement (031-701-1573)Exactly same as Forge Kit at less than half the price!Product Description An all-new
blow-off valve option for the 2.0T FSI and TSI engines, including the
latest engines, fitted with the IHI turbo, (or 1.4T using additional
fitting kit FMBGFK3) found in a wide range of vehicles from VW and Audi.
The new valve, part number FMFSITAT, is a hybrid of sorts, that
combines the existing full replacement solenoid controlled recirculating
valve with the blow-off valve adapter. The result is a full replacement
atmospheric blow-off valve that integrates seamlessly with the OEM
electronics and results in absolutely no fault codes, no check engine
lights, and no detriment to the performance of the vehicle in any way. Application:For 2005-2013 Audi VW 2.0T FSI TSI Engines Marked 5 & 6 (Will not fit on the split 2013+ newer 2.0L engines.)Features and Benefits:This valve currently has the largest bore and flow rate of all the valves we produce.The internal diameter of the inlet port is a massive 50mm diameter.It is very responsive with 100% full flow to atmosphere having no restrictions at the outlets.The Banjo style top port will accommodate 360 degree positioning of the vacuum hose.Internally the valve uses a Single alloy billet piston combined with our current range of valve springs.This enables the valve to be tuned to suit your boost level.Available for a wide range of vehicles (universal fitting)Include all parts required for installation
2y
8
SQV BOV adapter for stock location for Hyundai/Kia 1.6T or
2.0T or Honda Civic & Jade 1.5T
SQV BOV (Blow-off Valve) adapter for stock location (on
compressor housing) for Hyundai/Kia 1.6T or 2.0T and for Honda Civic & Jade
1.5T PLUS Type-1 blow off SQV valve type kit (Blow Off Valve).
Does not fit Hyundai Kona 1.6T 2022 model.
UNIVERSAL BLOW OFF VALVE SQV 4 IV
Package Includes:
1 x Type-1 blow off SQV valve kit
Color: Black
Applications:
* Universal Fit All Turbocharger/Supercharger Cars
Specifications:
* Brand new SQV4 turbo blow off valve (BOV). Made with high
quality CNC billet aluminum die-cast body and anodized finished. Including
O-ring, hardware and 2.5'' adapter flange.
* The blow off valves is a dual stage pull-type relief
valve. Unlike typical push type blow-off valves, this one will not leak under
any level of boost.
* It is for maximum performance, incorporates both a small
primary valve for ultra quick activation, and a larger secondary valve for
additional discharge capacity. It is constructed of billet aluminum, which
ensures long-term durability and a high luster look.
* Triple Fin design produces "Super Sound”. Triple Fins
set at the centre of the funnel produces a dynamic and aggressive sound.
* Instruction is included. Professional installation is
highly recommended!
* Item exactly the same as picture shown.
SQV Q Blow Off Valve Flange Adapter for Hyundai/KIA 1.6/2.0T
- Turbo Models
SQV BOV (Blow-off Valve) adapter for stock location (on
compressor housing) for Hyundai/KIA.
Comes with all hardware for you to easily attach any
universal SQV BOV and replace the stock mechanical diverter valve at the turbo.
The flange replaces the stock CBV rubber diaphragm and seals
the port.
The flange is manufactured using billet 6061 aluminum and
CNC machined for precise fitment.
Applications:
For Hyundai Genesis Coupe 2.0T
Hyundai Veloster, Sonata, etc 1.6T/2.0T
Kia 1.6T/2.0T (Does not fit Hyundai Kona 1.6T 2022 model)
Honda Civic & Jade 1.5T
New Items
2y
VERIFIED
7
Opel Astra, Corsa, VXR, OPC, Zafira - Upgrade Aluminium
Recirculating Blow Off Valve Recirculating Dump Valve Blow Off Valve This aluminium piston operated recirculation valve is the perfect
replacement for the OEM valve which is prone to failure when the engine has
been tuned or had an upgrade to the engine management software. This valve is
complete and ready to install with no fitting kit required although professional
fitting is recommended. Fast response for great performance! COMPATIBILITYOpel Astra G GSi or H VXR 2.0 Turbo PetrolOpel Zafria A GSi or B VXR 2.0 Turbo PetrolOpel Corsa D & E VXR 1.6 Turbo PetrolEngine Codes: Z20LET, Z20LEL, Z20LEH, Z20LET, Z16LEL,
A16LEL,Z16LER, A16LER, A16LES, B16LER FEATURES:Billet Aluminum ConstructionPiston OperatedDirect Replacement for OEM valve IN THE BOX:1 X Blow Off Valve (Black)1 X Standard Spring, Pre-installed (for vehicle running standard boost)1 X Yellow Spring - for vehicles running higher boost We do installations, performance modifications/upgrades, ECU
Tuning (Mapping), Race exhaust systems, Downpipe, De-Cat, Diagnostics, clearing
of MIL/Engine lights, Servicing and general Repairs at our RMI Accredited Workshop
in Rietfontein, Pretoria Extra services
offered:We do provide a comprehensive diagnostic service/analysis with
a full report as well as clearance of error codes at R750.00. ECU Repairs, re-coding, etc is also available. We also do installation of Turbo Actuators, Boost Gauges, Boost
controllers, BOV/DV adapters as well as performance modifications at our Workshop. For Turbo recon or performance tuning (Chip Tuning – various
Stages of ECU and Gearbox Mapping, DP/EGR etc) & hardware (Cold Air Induction
kits, DP removal, performance exhausts, oil cooler fitment, intercooler, etc)
contact us through email or the cellular number. Speedpoint/Credit card facility available!
2y
VERIFIED
6
Opel Astra, Corsa, VXR, OPC, Zafira - Upgrade Aluminum
Recirculating Blow Off Valve
Recirculating Dump Valve Blow Off Valve
This aluminum piston operated recirculation valve is the perfect
replacement for the OEM valve which is prone to failure when the engine has
been tuned or had an upgrade to the engine management software. This valve is
complete and ready to install with no fitting kit required although professional
fitting is recommended. Fast response for great performance!
COMPATIBILITY
Opel Astra G GSi or H VXR 2.0 Turbo Petrol
Opel Zafria A GSi or B VXR 2.0 Turbo Petrol
Opel Corsa D & E VXR 1.6 Turbo Petrol
Engine Codes: Z20LET, Z20LEL, Z20LEH, Z20LET, Z16LEL,
A16LEL,
Z16LER, A16LER, A16LES, B16LER
FEATURES:
Billet Aluminum Construction
Piston Operated
Direct Replacement for OEM valve
IN THE BOX:
1 X Blow Off Valve (Black)
1 X Standard Spring, Pre-installed (for vehicle running
standard boost)
1 X Yellow Spring - for vehicles running higher boost
We do installations, performance modifications/upgrades, ECU
Tuning (Mapping), Race exhaust systems, Downpipe, De-Cat, Diagnostics, clearing
of MIL/Engine lights, Servicing and general Repairs at our RMI Accredited Workshop
in Rietfontein, Pretoria
Extra services
offered:
We do provide a comprehensive diagnostic service/analysis with
a full report as well as clearance of error codes at R750.00.
ECU Repairs, re-coding, etc is also available.
We also do installation of Turbo Actuators, Boost Gauges, Boost
controllers, BOV/DV adapters as well as performance modifications at our Workshop.
For Turbo recon or performance tuning (Chip Tuning – various
Stages of ECU and Gearbox Mapping, DP/EGR etc) & hardware (Cold Air Induction
kits, DP removal, performance exhausts, oil cooler fitment, intercooler, etc)
contact us through email or the cellular number.
Speedpoint/Credit card facility available!
2y
VERIFIED
4
DV Blow Off Adapter for Mercedes 2.0 GDi Turbo Engine e.g.
A180, A250, CLA 250 & GLA 250
The spacer is a pressure release system that can be used
with the stock diverter valve (DV) to vent extra boost air into the atmosphere
(awesome sound) instead of sending it back into the engine's intake manifold.
It will not create lag nor negatively affect your vehicle’s performance ....
but it sounds awesome!!
Car Maker: Mercedes Benz - 2.0GDi Turbo Engine
Material Type: Forged Aluminium
Condition: New
Fitment: - Mercedes 2.0 GDi Turbo Engines Only
Colour: Polished Silver
Direct bolt on without worry of a check-engine light.
This Atmospheric Blow-off Valve Spacer (DV Adaptor) is for
the Mercedes 2.0GDi Turbo engines.
The spacer is a pressure release system that can be used
with the stock diverter valve (DV / BOV) to vent extra boost air into the
atmosphere instead of recirculating it back into the engine intake.
In The Box:
1 x Blow Off Valve Adapter with O-rings
3 x Socket Cap Bolts
(1 x Complete Kit)
We also do installation of DV/BOV Adapters, Turbo Actuators,
Boost Gauges, Boost controllers as well as performance modifications at our
Workshop.
For Turbo recon, hybrid or upgrade, performance tuning
(Software/Dyno Tuning - various Stages & hardware (induction kits,
DPF/EGR/Catalytic Converter removal, performance exhausts, oil cooler fitment,
intercooler, performance clutches, gauges, engine rebuilds, general vehicle
repairs and servicing, etc) contact us.
2y
VERIFIED
3
DV+ Blow Off Diverter Valve for Audi S3 8V VW Mk7 Golf R -
2.0TSI 2013 -ON
DV plus Performance Diverter Valve
*This is NOT a blow off valve*
It does not make any noise, this is a high performance OEM
Replacement diverter unit
Features
- Billet aluminium chassis
- Replaces OEM plastic parts with engineered metal units to
increase strength and reliability
- Great for OEM map, but even better for mapped engines by
providing additional strength and actuation to handle the increased boost
- Pilot actuated valve mechanism for quick response at high
boost
- Machined to OEM tolerances
- Fully serviceable
- Retains the factory coil for perfect alignment and use
- Complete with fittings
Application
VW Mk7 Golf R
Audi 8V S3
It does not fit the 1.4 TwinCharged engine.
It does not fit any Diesel engine.
It does not replace the solenoid fully
Package Content:
1 X DV Blow Off Valve adapter (solenoid is not included –
use the OEM solenoid)
2y
VERIFIED
3
DV+ Diverter Valve for 1.4 TSI VW Audi Twin Charged Engines
with TMS advantage
DV plus Performance Diverter Valve
*This is NOT a blow off valve*
It does not make any noise, this is a high performance OEM
Replacement diverter unit
Features
- Billet aluminium chassis
- Replaces OEM plastic parts with engineered metal units to
increase strength and reliability
- Great for OEM map, but even better for mapped engines by
providing additional strength and actuation to handle the increased boost
- Pilot actuated valve mechanism for quick response at high
boost
- Machined to OEM tolerances
- Fully serviceable
- Retains the factory coil for perfect alignment and use
- Complete with fittings
Application:
1.4 TSI VW Audi Twin Charged Engines
It does not fit any Diesel engine.
It does not replace the solenoid fully.
Package Content:
1 X DV Blow Off Valve adapter (solenoid is not included –
use the OEM solenoid)
2y
VERIFIED
8
SQV BOV adapter for stock location for
Hyundai/Kia 1.6T or 2.0T or Honda Civic & Jade 1.5T
SQV BOV (Blow-off Valve) adapter for stock location
(on compressor housing) for Hyundai/Kia 1.6T or 2.0T and for Honda Civic &
Jade 1.5T PLUS Type-1 blow off SQV valve type kit (Blow Off Valve).
Does not fit Hyundai Kona 1.6T 2022 model.
UNIVERSAL BLOW OFF VALVE SQV 4 IV
Package Includes:
1 x Type-1 blow off SQV valve kit
Color: Black
Applications:
* Universal Fit All Turbocharger/Supercharger Cars
Specifications:
* Brand new SQV4 turbo blow off valve (BOV). Made with high quality CNC
billet aluminum die-cast body and anodized finished. Including O-ring, hardware
and 2.5'' adapter flange.
* The blow off valves is a dual stage pull-type relief valve. Unlike
typical push type blow-off valves, this one will not leak under any level of
boost.
* It is for maximum performance, incorporates both a small primary valve
for ultra quick activation, and a larger secondary valve for additional
discharge capacity. It is constructed of billet aluminum, which ensures
long-term durability and a high luster look.
* Triple Fin design produces "Super Sound" .Triple Fins set at
the center of the funnel produces a dynamic and aggressive sound.
* Instruction is included. Professional installation is highly
recommended!
* Item exactly the same as picture shown.
SQV Q Blow Off Valve Flange Adapter for Hyundai/KIA 1.6/2.0T - Turbo Models
SQV BOV (Blow-off Valve) adapter for stock location (on compressor
housing) for Hyundai/KIA.
Comes with all hardware for you to easily attach any universal SQV BOV
and replace the stock mechanical diverter valve at the turbo.
The flange replaces the stock CBV rubber diaphragm and seals the port.
The flange is manufactured using billet 6061 aluminum and CNC machined for
precise fitment. Applications:
For Hyundai Genesis Coupe 2.0T
Hyundai Veloster, Sonata, etc 1.6T/2.0T
Kia 1.6T/2.0T (Does not fit Hyundai Kona 1.6T 2022 model)
Honda Civic & Jade 1.5T New Items
2y
VERIFIED
6
DV Adapter (Blow Off Adapter) for Audi & VW – VAG, FSiT
and TFSi
The spacer is a pressure release system that can be used
with the stock diverter valve to vent extra boost air into the atmosphere
instead of sending it back into the engine's intake piping.
Car Maker: Audi/Volkswagen
Material Type: Aluminum
Special Features: Universal
Condition: New
Car Compatibility: 1.4,
1.8, 2.0 TSI + for FSiT
Fitment : Turbocharge
Engines Only
Colour: Polished
Silver
Item Name: Blow
Off Dump Valve Adapter Spacer Kit
Direct bolt on without worry of a check-engine light.
This Atmospheric Blow-off Valve Spacer is a first of its
kind for the 1.4 / 1.8 / 2.0 TSI /for TFSI Turbo engines only. The spacer is a
pressure release system that can be used with the stock diverter valve to vent
extra boost air into the atmosphere instead of sending it back into the engine's
intake piping.
In The Box:
1 x Blow Off VALVE Adaptor
3 x M6x40 Socket Cap Bolts
Vehicle Fitment e.g:
Audi A3 1.4 1.8 2.0 TSI /for FSTi Turbo
Audi A3 2.0 Turbo
Audi A4 1.8 / 2.0 Fsi Turbo
Audi A6 2.0 Fsi Turbo
Audi S3 2.0 Turbo 8P / 8V
Audi TT Mk2 2.0 Turbo
Audi TT MK2 TTS 2.0 Turbo
SEAT Altea 2.0 Turbo
SEAT Leon 1.4 Turbo TSI 125
SEAT Leon 2.0 Turbo FSiT
Skoda Octavia 1.4 TURBO 140
Skoda Octavia 2.0 Turbo
Volkswagen Beetle 2013 2.0 Petrol Turbo
Volkswagen Golf MK5 1.4 TURBO 140
Volkswagen Golf Mk5 GTI 2.0 Turbo
Volkswagen Golf Mk5 GTI EDITION 30 ED30
Volkswagen Golf Mk6 1.4 Turbo
Volkswagen Golf Mk6 GTI ED35 2.0 Turbo
Volkswagen Golf R MK6 2.0 Turbo
Volkswagen Passat 1.8 / 2.0 for Fsi Turbo
Volkswagen Scirocco 2.0 Turbo
Volkswagen Scirocco R 2.0 Turbo
This part does not fit the twin charged 1.4 engine (Turbo
and Supercharger)
It replaces the standard plastic diverter valve which is
prone to failure.
Please Note:
This part does not fit the twin charged 1.4 engine (Turbo
and Supercharger) - Please contact us for DV adaptor on 1.4 TSi VW & Audi
as well as for Mini Cooper, BMW, Ford, Mazda, Subaru and Peugeot/Renault.
We also do installation of the adapter as well as
performance modifications at our Workshop.
We do installations, performance modifications/upgrades, ECU
Tuning (Mapping), Race exhaust systems, Downpipe, De-Cat, Diagnostics, clearing
of MIL/Engine lights, Servicing and General Repairs, ECU Repairs and Key Coding
at our workshop in Rietfontein, Pretoria.
Speedpoint/Credit card facility available!
2y
VERIFIED
5
Adjustable Blow Off valve adapter Spacer for Fiat / Alfa 1.4
Multi-Air (HP)
The blow off valve adapter was designed to give you that
atmospheric blow off sound you’re looking for on your Turbo vehicle.
A simple bolt on modification that is compatible with the
factory ECU and does not cause a CEL. Completely reversible and 100% safe for
your vehicle.
- Aluminium construction
- Adjustable blow off volume to mute sound if need be
- Fully serviceable
- Black/gold Anodized
Item Includes:
1 x Blow Off Valve Adapter
3 x Bolts
1y
VERIFIED
2
Blow Off Valve – Universal Fit on High Performance
Turbocharged Vehicles
Featuring a 50mm aluminium piston so that there are no
issues with split diaphragms, we have not found the power handling limits of
this valve yet! The piston uses heat stabilised Viton O-rings and high
temperature Mobil 1 grease to ensure a long life with minimal wear and very
long service intervals.
As tested on various high-boost applications, it proofs its
ability to handle high boost and high-power applications. The vacuum barb is a
huge 6mm ID and fully rotatable 360 degrees to suit any installation. This
valve is suitable for custom installations only and cannot be installed on a
silicon hose. It is available in machine finished silver.
Fitment: Universal
Extra services offered:
We do provide a comprehensive diagnostic service/analysis
with a full report as well as clearance of error codes.
Servicing and repairs on all model vehicles at our RMI
Accredited Workshop.
We also do installation of Turbochargers, Hybrid Turbos,
Turbo Actuators, Superchargers, Supercharger Pulley conversions, Boost Gauges,
Boost controllers, BOV/DV adapters as well as performance modifications at our
Workshop - email or contact us on 012 111 1252.
For Turbo recon or performance tuning (Chip Tuning - various
Stages of ECU and Gearbox Mapping, DP/EGR etc) & hardware (Cold Air
Induction kits, DP removal, performance exhausts, oil cooler fitment,
intercooler, etc) contact us through email or the cellular number.
We have speedpoint/card payment facility at the workshop in
Rietfontein.
2y
VERIFIED
3
Manifold boost & Vacuum Source - Turbo Boost Tap for VW/Audi TSI TFSI Gen 3, 1.8 or 2.0 EA888, Vacuum Sensor Adapter
The 1.8 and 2.0 TSI TFSI EA888 3rd generation motor presents
many new obstacles for aftermarket modifications. One obstacle is finding a
location for a manifold boost & vacuum source. This is essential if you
plan to install a boost gauge, diverter valve, water/meth kit, etc. Traditional
boost taps used on the earlier TSI engines are not compatible due to the
redesigned intake manifold found on the 3rd generation motor.
Designed with simplicity of install in mind this a simple yet effective boost tap that installs on the intake manifold. Simply unscrew the pressure sensor located on the top of the intake manifold and install the between the sensor and the manifold. The installation can be completed in minutes and is completely reversible.
Application:
Fit for Audi 2.0 TFSI Gen3, VW Golf Inc MK7 2.0 TSI
Fits all Generation 3 EA888 TSI 1.8t and 2.0t engines
This kit allows you to add boost / vacuum ports to the engine to allow installation of
a boost gauge, blow off valve, etc.
Features:
Installed in under 5 minutes
Includes:
1 X Boost Tap
1 X Extended Screw
1X O-ring
2y
VERIFIED
5
Blow Off / DV Adapter for Audi & VW – 1.4 TSi
The spacer is a pressure release system that can be used
with the stock diverter valve to vent extra boost air into the atmosphere
instead of sending it back into the engine's intake piping.
Car Maker: Audi/Volkswagen
Adapter Brand Name: Blow
Off Valve Adapter
Displacement: 1.4
TSi
Material Type: Aluminium
Condition: New
Car Compatibility: 1.4
TSI
Fitment : Turbocharge
Engines Only
Colour: Polished
Silver
Item Name: Blow
Off Dump Valve Adapter Spacer Kit
Blow Off / DV Adapter for 1.4 TSi
Direct bolt on without worry of a check-engine light.
In The Box:
1 x Blow Off VALVE Adaptor
2 x M6x40 Socket Cap Bolts
With the introduction of the VAG 1.4 liter TSi Turbo /
Supercharged Engine, an Atmospheric Blow-Off Adapter was developed and designed
to fit this application. Simple in execution, yet offering the desirable
atmospheric blow-off valve sound, this product has been designed to be fully
compatible with complexities of this engine.
Item Includes:
1 x Blow Off Valve Adapter
2 x M6x35 Socket Cap Bolts
Application:
For Volkswagen Scirocco TSi 1.4L Turbo Engines ONLY
For Volkswagen Polo GTi 1.4L Turbo Engines ONLY
For Volkswagen Golf MK5 1.4L Turbo Engines ONLY
For Volkswagen Golf MK6 1.4L Turbo Engines ONLY
For Seat Leon TSi 1.4L Turbo Engines ONLY
For Seat Ibiza TSi 1.4L Turbo Engines ONLY
For Audi A3 TSi 1.4L Turbo Engines ONLY
For Audi A1 TSi 1.4L Turbo Engines ONLY
2y
VERIFIED
8
DV (Blow Off Valve) Adapter for 2019-22 for Ford Mustang and
ST EcoBoost Turbo
Type: Blow Off Valve Adapter
Colour: Red
Material: Aluminium alloy
Application:
Fit for Ford Explorer, Mustang, Ranger 2.3L 2.7L 3.0L Eco-boost
Engines
Package Included:
1X Blow Off Valve Adapter
3X Bolts
1y
VERIFIED
Save this search and get notified
when new items are posted!