Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for Engineering & Architecture jobs in City Centre
1
SavedSave
The backup engineer will have expert knowledge of backup systems to manage monitor and report as required.
4 months contract
Backup services skills
Commissioning of new backup clients (Servers)Storage Health Check (Data Domains)Backup Hardware Configuration, monitoring and installationTesting applications file servers and exchange servers uptimeReport writingCreation f Backup workflow, Policies and ScheduleProvide data restore services as requested and/or requiredManage archival of data at both local and remote sitesData Ceding/Cloning and Replication (from Regions to DR Sites)Provide statistics showing successful completion of backupsTake corrective action for any data backup that does not complete successfullyEnsure Data is Successfully Backed up and properly stored in the event restore is necessary.Knowledge of backup snapshotsThorough knowledge of backup solutions, services and equipment
Requirements:
Engineers must have a minimum of 3-5 years’ experience in the Cisco, ExaGrid, HP, Dell and Veaam environments.Single point of contact for all security and backup related services.End to end Firewalls Management, Cisco ISE, Cisco Sourcefire, Cisco Routing and SwitchesEnd to End Backup knowledge with Veaam software knowledgeKnowledge of ExaGrid, HP hardwareNetwork scans, resolution and use of all security toolsProvide support, upgrades on relevant equipment as and when it is required.Projects initiation and reporting
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMzE4Njg2NDQ2P3NvdXJjZT1ndW10cmVl&jid=376669&xid=1318686446
16h
1
SavedSave
The senior engineer will be the lead and report to the ICT Security Manager.
4 months contract
Security & Firewalls skills
Primary role of management of Cisco ASA Firewalls, Cisco ISE, Cisco Sourcefire, Cisco Routing and Switches within the Business Connexions for BCX customers Nation wideTroubleshooting and resolutions of all ASA firewall related issuesTroubleshooting all ISE related issuesTroubleshooting and resolving all Cisco ISE related issuesTroubleshooting and resolving all Cisco Sourcefire related issuesTroubleshooting and resolving all Cisco routing issuesTroubleshooting and resolving all Cisco switches related issuesTroubleshooting and resolving all Cisco wireless related issuesEscalate ticket to Cisco by logging the TAC and be involved in the troubleshooting via Webex or onlineEndpoint security knowledgeNetwork Vulnerability Assessment toolsThorough knowledge of network, firewalls services and equipment
Requirements:
Engineers must have a minimum of 3-5 years’ experience in the Cisco, ExaGrid, HP, Dell and Veaam environments.Single point of contact for all security and backup related services.End to end Firewalls Management, Cisco ISE, Cisco Sourcefire, Cisco Routing and SwitchesEnd to End Backup knowledge with Veaam software knowledgeKnowledge of ExaGrid, HP hardwareNetwork scans, resolution and use of all security toolsProvide support, upgrades on relevant equipment as and when it is required.Projects initiation and reporting
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMzM4MjgwMTM0P3NvdXJjZT1ndW10cmVl&jid=376670&xid=1338280134
17h
1
SavedSave
To implement, manage and monitor earth observation systems, encompassing the design of EO systems architecture, ingestion, processing, archiving and dissemination of products for existing and new satellite sensors received.
Key Outputs:
Oversee the transfer (data management) of old archive data to new archiving systems and availability of processing systems/products.Oversee the dry run of systems and onsite acceptance systems testing with international and local suppliersPerform technical tasks, such as software development, systems integration, systems administration, testing, etc. where needed to implement, integrate, automate, or improve Earth observation data systems.Establish appropriate processes and practices and ensure that these are implemented to create an enabling and supportive for technical growth, reliability, communication, and quality of servicesDefine and document options for future system architectures as input and to enable the roll out of the Data Systems strategy and plan.Consult with the business to discuss the Directorate’s needs, conduct research on best technologies and set up systems to deliver on requirementsKeep abreast of relevant technology by networking and participating at technical conference, webinars and workshopsOperate within the framework of applicable industry regulations and best practicesManage the project close-out process and produce final project report, reviewing strategic project and lessons learntIdentify strategic projects based on strategic priorities, objectives and action plans for existing and new satellite sensors other programmes.Provide input into and manage maintenance and operational contracts with local and international suppliers, pertaining to technical requirements, budgeting, costing, risk analysis and management, scheduling, and maintenance levelsDevelop business case to determine feasibility, associated costs, risks and user requirementsPrepare and track project plan to map out project activities, resource planning, costs, and associated risksExecute strategic projects to ensure adherence to project plan and timeframesParticipate in new sensor evaluations to establish / recommend the EO sensor portfolio for national and regional requirementsMonitor compliance to contract and systems integration processesDevelop and monitor adherence to data ingestion and production standard operating proceduresProvide feedback on quality of passes receivedLead formal systems engineering and project management processes.Project Engineering, Integration and Upgrade of Earth Observation Systems
Qualifications and Experience:
Master’s Degree in Engineering, Electronics or Aerospace (NQF Level 9)Minimum 5 years...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMTMxNTY1OTM5P3NvdXJjZT1ndW10cmVl&jid=1296732&xid=2131565939
17h
1
SavedSave
The Simulation Engineer is responsible to work on all development phases from research and development to design and manufacture, through to testing and evaluation of systems. The management of all simulation tasks and execution to business standards. The goal is to simulate systems and components and give results and feedback to development team.KEY RESPONSIBILITIES & ACCOUNTABILITIES:o Develop concepts and to perform problem solving to meet the design criteria under supervision of the Chief Engineer.o Define, create, solve and interpolate simulation models according to the specification provided by the Chief Engineer.o Evaluate finite element simulations.o Prepare simulation models of components; sub-assemblies and assemblies, using the business file structure guidelines, number protocol and design standards.o Prepare simulation solutions of design concepts, using own initiative and incorporating the inputs of members of the development team.o Responsible for the technical integrity of the allocated simulation, including the integrity of the results and conclusions made.o Document and record simulation results.O Ensure traceability of simulation models or results.O Follow the development process and procedures as described in the quality system, ensuring that the relevant reviews and procedures are completed, in order to reduce design risk.O Assist during the testing of prototypes, ensuring that closed loop feedback can take place during the simulation process.O Communicate with testing and design team, to ensure the flow of information during prototyping and development.O Ensure all project documentation are generated and gathered, as well as filled accordingly to business processes.O Communicate and incorporate inputs from the test and design parties during the design process.O Include the test and design parties to perform tests to complete the design cycle utilising business processes.O Plan and schedule of tests as required on allocated simulations.O Ensure that projects are executed according to the time, mass and budget targets.O Represent the business at design reviews.O Attend design reviews internally and externally with the client.O Management of simulations throughout the acquisitioning phase, being accountable.O Manage a simulation group, within a programO Planning the work loading of simulation personnel and license requirements.O Drafting, approval and sign-off of simulation tasks.O Responsible for the execution of simulation projects, under supervision of the Senior Simulation Engineer.O Design support, capturing of requirements during the development phase.O Assist ILS with feedback to design on repair, maintenance and other information requiredO Responsible for the allocated simulation from inception up to sign-off. Ensuring components are a...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNzMwOTg4OTQzP3NvdXJjZT1ndW10cmVl&jid=1755313&xid=2730988943
17h
1
SavedSave
Newly Graduate Electronic Engineer.
Must have a degree.
No experience needed.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS84NzIwNDQzNj9zb3VyY2U9Z3VtdHJlZQ==&jid=1226974&xid=87204436
18h
Ads in other locations
1
SavedSave
Pretoria Requirements:3 Years National Diploma in Mechanical/ Electrical or N6 with Trade certificate.Proficient in Kawasaki, Fanuc Robotics.Electrical and mechanical skills.Programming skills.Microsoft office knowledge (Word/PowerPoint/Excel/Outlook).Fault-finding ability.6 Sigma problem solving Methodology.Proper communication and escalationKnowledge of MOS Implementation.Knowledge of constraint management principles.Proficient in Siemens TIA Portal, Mitsubishi PLCsSEW, Simotion Controls and drivesBasic knowledge in Vision systems and scanners e.g. Cognex, Sick3-Years’ experience in Automotive industry3-Years’ experience in Maintenance backgroundMust have displayed proven capability of leading a team in current or previous roles Knowledge and Skills:Foster functional & Technical ExcellenceKnow and have a passion for our business and our customers;Demonstrate and build functional and technical excellence;Ensure process discipline;Have a continuous improvement philosophy and practice. Own Working TogetherBelieve in skilled and motivated people working together;Include everyone, respect, listen to, help and appreciate others;Build strong relationships/be a team player/develop ourselves & others;Communicate clearly, concisely and candidly. Role Model Ford ValuesShow initiative, courage, integrity and good corporate citizenship;Improve quality, safety and sustainability;Have a can do, find a way attitude and emotional resilience;Enjoy the journey & each other. Have fun – never at others’ expense. Deliver Results yearsDeal positively with our business realities, develop compelling & comprehensive plans while keeping an eye on the enterprise view;Set high expectations and inspire others;Make sound decisions using facts and data;Hold ourselves and others responsible and accountable for delivering results and satisfying our customers.Strong problem solving and conflict management skills Duties:Supporting Production with well-maintained facilities adhering to World Class Standards.Driving SQCDPME by understanding and consistently applying MOS standards and strategies.Validate and bridge operational needs to ensure Production line is running safely and smooth.Supervise, Coach and be responsible for Maintenance team.Analyze breakdown reports and implement corrective measures.Adhere to all safety rules and regulationsEnsure PM strategy is implemented and followed, PM’s are done with integrityInstall / repair equipment within the timing plan.Analyze the work performed by team to ensure good performance.Ensure efficient utilization of the team.Produce well defined reports when requested for future planning or to substantiate the progress of a task or project.Ensure the adherence to the Company Code of Conduct and Safety rules.Train subordinates to maximize productivity.Ensure the availability of the required spares for emergency and planned repairs+95% Equipment AvailabilityReduce breakdown Mean Time To Repair (MTTR) to 450minPM completion ratio of ( 97%No O
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzM2NzcwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1146873&xid=1266_36770
2y
1
SavedSave
A leading electrical company in Pretoria specializing in holistic electrical solutions in every industry are looking to recruit a Construction Electrical Foreman to join their team.
* Site Foreman Oversee the day to day planning & installation of construction site (electrical portion)
* Qualified Electrician
* 8 years of experience on the job
* Wireman’s License will be an advantage
* Valid drivers license and reliable transport
* Matric
R20 000- R30 000 CTC
* Qualified Electrician
* 8 years of experience on the job
* Wireman’s License will be an advantage
* Valid drivers license and reliable transport
* Matric
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzE0OTYwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1160023&xid=1555_14960
2y
1
SavedSave
*Reference: CET003640-DE-1*
We are looking for two software developers with 4 to 5 years experience in PLC / Scada / HMI software development.
*Requirements:*
Qualification:
National Diploma in Engineering: Mechatronics or Industrial Automation
Experience with the following PLC hardware is preferable:
* Turck TX710 HMI/ PLC
* Turck TBEN PLC range
* Beijer HMI’s
*Responsibilities:*
* Software development
* Pre-commissioning of developed software at our facilities
* On-Site commissioning
The candidates must have very good understanding Codesys V3.0 or later
The candidates must be willing to travel, local and abroad, as the company does several projects in the USA.
R R 32 000-00 - R 36 000-00
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzE0MDUzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1156332&xid=1555_14053
2y
1
SavedSave
*Reference: NES013301-SV-1*
An established company within the Consumer Goods is looking to employ an ambitious as a Sales Engineers to join their team.
*Job & Company Description:*
An innovative organisation involved in sensor technology, is looking to employ technically skilled Industry Sales Specialist to join their ambitious team! The successful candidate will be based in Gauteng and should have a extensive knowledge and understanding of the Consumer Goods Industry, including food and beverage, consumer care, food processing, print and packaging. If this tickles your interest apply today!
*Education:*
* Bachelor’s Degree in Engineering
*Job Experience & Skills Required:*
* Minimum 5 years’ experience in the Consumer Goods Industry
* Minimum 3 years’ Sales experience
* Experience using SCADA and PLC software
* Skills utilizing Microsoft office specifically CRM Dynamics 365
*Apply now! *
For more engineering jobs, please visit (www.networkrecruitment.co.za)(http://www.networkrecruitment.co.za)
If you have not had any response in two weeks, please consider the vacancy application unsuccessful. Your profile will be kept on our database for any other suitable roles / positions.
For more information contact:
Shaleen van Staden
Researcher - Engineering
(087 351 0724)(tel:0873510724)
R TBC - Annually
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzEyNzgzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1150835&xid=1555_12783
2y
1
SavedSave
The U.S. Mission in Pretoria is seeking eligible and qualified applicants for a position of Audio Visual Technician in the Information Programs Center (IPC).
Incumbent will be Pretoria’s Audio/Visual (A/V) Technician for all non-Public Affairs Section (PAS) events and capabilities. Ensures Pretoria has all required modern A/V systems and capabilities, including fixed and mobile systems with up to date equipment. Trains end-user and technical personnel in these systems and assists constituent posts in Johannesburg, Durban and Cape Town, as needed, with similar A/V related tasks. Incumbent will also provide support to other posts in the region by request with Information Management Officer (IMO) approval. Audio Visual services are to be provided, including Digital Video Conferences, In-house television signal distribution to the Embassy, Internet video teleconferencing capabilities, Sound and Audio/Visual management for events outside of the Embassy and conducts training sessions to keep IRM staff (and PAS staff where applicable) at all four posts up to date. Reports to the Communications and Audio/Visual Programs (CAP) office supervisor.
*Acts as Regional Country AV Manager for all non-PAS sound and A/V equipment.*
* Manages all Embassy off-site Sound and A/V programs, including power-point presentations, sound, lighting, staging and Safety.
* Plans AV set ups with external contractors and staff for events.
* Operates, maintains, troubleshoots and repairs in-house television network system including DSTV decoders, AETN dish and decoders and AFN.
* Establishes and maintains professional relationships with senior-level Sound and A/V colleagues in the commercial sector in order to stay abreast of new developments and facilitate Sound and A/V arrangements during VIP visits.
* Formal and informal training with Mission constituent posts and regional A/V technicians on Sound and A/V equipment and ensures that all posts have their equipment with most recent technology and in working order.
* Maintains non-PAS AV historical content files (DVDs, as well as post- and Washington-generated video, audio, photo files for Mission and regional posts)
* Manages all sound and video capabilities in the CMR and DCMR.
*VTC and Internet video teleconferencing management and planning:*
* Oversees over $250,000 worth of VTC equipment country wide, including maintenance, testing and repairs.
* Training as well as communicating with internal and external contacts, scheduling and programming.
* Plans and implements Internet based conferencing tools and equipment such as Webex, Zoom and MS Teams for the Mission.
* Ensures Post is fully capable of operating in a pandemic and post-pandemic climate.
* Provides tools and capabilities for Mission-wide virtual meetings such as Town halls.
* Schedules, hosts and controls these meetings as necessary.
* Assisting customers with their work-related A/V capabilities.
*Content prod
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzEyNjA1X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1150739&xid=1555_12605
2y
1
SavedSave
*Reference: Pta002614-EP-1*
Electronic design engineer required to do hardware design for an array of Clients and Products. Commercial development. Skills needed in developing complex hardware and writing firmware in C utilizing ARM processors in a RTOS environment. Wil also do analog and digital schematic design utilizing multi-layer PCB layouts.
*Hardware Engineer*
Centurion
Electronic Hardware engineer required to design and develop a variety of electronic products for the Mining, Health care and railway Industries.
The ideal candidate would have a proven track record of developing complex hardware and writing firmware in C utilizing ARM processors in a Real Time Operating System environment.
*Qualification:*
B. Eng/ B. Tech Electronic Engineering
*Skills and Knowledge required*
* Electronic hardware design capabilities (Analog and digital circuit design)
* Real Time Operating System and super-loop firmware development on microcontrollers using ANSI-C.
* Open System Interconnect model (OSI model) approach to firmware development.
* PCB layouts
*Accountabilities*
* Product delivery according to the requirement and development specification
* Embedded firmware development u
* Develop protection relays and metering products.
*Please apply via our website: *(www.edrecruiters.co.za)(http://www.edrecruiters.co.za)* or alternatively submit your cv to (cv@edrecruiters.co.za)(mailto:cv@edrecruiters.co.za) - Reference 2614
*
Should we not contact you within 14 days, please consider your application as unsuccessful.
Companies may expire jobs at their own discretion.
*ONLY SA CITIZENS CAN APPLY*
R Neg - Neg
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzExODY4X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1148160&xid=1555_11868
2y
1
SavedSave
*Reference: NES013174-GH-1*
An opportunity is available for a Field Service Electronic Technician at a world-class company based in Gauteng!
*Job & Company Description:*
* *
The company is based in Gauteng and looking for a vibrant Field Service Electronic Technician, who would like to further their career within the Mining sector. The company is a market leader in the engineering industry and is consistently developing within the market. The successful candidate will be joining a strong established team and equipped with the building blocks to excel within the company. The candidate will take part in site visits, meeting with clientele and should have extensive PCB exposure. If this sounds like the right fit for you, Apply Now!
*Education:*
* NDip Electronics or Electrical or Mechatronics
*Job Experience & Skills Required:*
* Extensive knowledge of PCB
* Knowledge of Embedded Software
* 0 - 2 years’ experience in the Auto Electrician industry (Graduates will be considered)
* An ability to work under pressure, and outside of normal office hours
* Excellent communication skills and an ability to work independently.
*Apply now! *
For more engineering jobs, please visit (www.networkrecruitment.co.za)(http://www.networkrecruitment.co.za)
If you have not had any response in two weeks, please consider the vacancy application unsuccessful. Your profile will be kept on our database for any other suitable roles / positions.
For more information contact:
Gelaine Hart
Specialist Recruitment Consultant
(ghart@networkrecruitment.co.za)(mailto:ghart@networkrecruitment.co.za)
R 150000 - 300000 Annually
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzExMDI5X180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1142748&xid=1555_11029
2y
1
SavedSave
At V3 Consulting Engineers, we pride ourselves on providing professional services to our wide client base. Our value system is the cornerstone of our services which are centered on efficiency and reliability. As a company, we are committed to participating in South Africa’s objectives. It is for this reason that transformation is a key pillar of our operations and we strongly believe that we must adhere to our transformation targets at all times. We adopt a proactive approach to transformation where transformative initiatives are well entrenched and documented in our enterprise-wide Strategic Management Plan. Collaboration and flexibility, results-driven teamwork, and proactiveness with time conscientiousness are some of the attributes entrenched in the V3 culture. Of the utmost importance is ethical behaviour. Our sincere intentions of building the South African economy are based on “Improving the Lives of Communities through Infrastructure Delivery” which is our Company motto. Much focus and energy is directed to bursary-funding, employing and mentoring the previously disadvantaged, measured skills transfer, social investment back to underprivileged rural communities, and other impactful interventions. V3’s management is committed to the implementation, effective management, and continuous improvement of our Business Management System which is ISO 9001:2015 certified, and therefore we view ourselves as your partner for development and sustained growth.
*ESSENTIAL:*
NQF level 5 in Office Administration or equivalent qualification
*IDEAL:*
NQF level 6 in Office Administration or equivalent qualification
*EXPERIENCE *
*ESSENTIAL:*
8 - 10 years relevant experience of which 5 to 8 years was supporting Executives
*IDEAL:*
8 – 10 years supporting Executives
*KNOWLEDGE:*
* Highly Computer Literate – proficient in MS Office
* Office practices, objectives, and computer software programmes.
* Insight on company operations and business units
* Event management
* Coordinating travel arrangements
* Operating standard office equipment and machinery
* Business Acumen
* Budget Management
* Cost Awareness
* Supplier Management
* Document Management
* Project Management
*SKILLS*
* Information management
* Follow, interpret, apply and explain instructions and/or guidelines
* Good problem-solver
* Ability to determine work priorities and multi-task
* Ability to work under pressure
* Ability to make decisions and take appropriate actions
* Planning and Organising Skills
* Intermediate Numerical Skills
* Communication Skills in English (Verbal, Non-verbal & Written)
* Able to work independently and meet tight deadlines
* Report writing skills
* Using an
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzExODIzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1148134&xid=1555_11823
2y
1
An international tracking solutions company is looking for a Technically strong Product Engineer to join their team.
Build hardware and software prototypes.
Monthly progress reporting.
Troubleshooting on database abnormalities.
Identify product and solution failures and work with technical team to solve them.
BA/ BSC in Computer Engineering
3-4 years experience in Product Engineering
R450 000 CTC to R600 000 CTC per annum based on proven experience
BA/ BSC in Computer Engineering
3-4 years experience in Product Engineering
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xNTU1XzE1MzEwX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1162078&xid=1555_15310
2y
1
SavedSave
PretoriaRequirements:Mechanical/Mechatronics/Electrical National Diploma (S- course) or Mechanical/Mechatronics/Electrical Engineering B-Tech.4-5 Years Automotive experience with a preference of body shop experience.Read mechanical and electronic schematics to ensure adherence to specifications and standards.Extensive knowledge in robots, with a preference for Kawasaki and Kuka robots.Proven track record of robot programming projects.Must have extensive knowledge of a variety of robots and robotic applications i.e.; grippers, spot welders, CO2 welders, sealer systems.of robotic programming architecture AS / K-logicHands-on experience in weld guns and timers that includes parameters backing up fault-finding with a preference for Obara or Bosch.In-depth knowledge of spot-welding applications / parameters / setup / fault finding.Adroit in SCA sealer systems.Seasoned in PLC’s. Must be able to monitor, fault-find, modify and make improvements (Siemens / Rockwell).Proficient in automation networks including Ethernet, Profinet, Profibus, CAN-bus and wireless networks.Fault finding and continuous improvement execution and implementation6 Sigma Certified/TrainedDuties:This position is for an engineering controls specialist with an emphasis on robotic controls specialization.The responsible person will be required to develop, implement, monitor and maintain efficient automation controls processes.To specialize in the continuous improvement, troubleshooting and programming of PLC’s/ Robots as well as other automation equipmentWell versed in ISO 9000 / ISO 14000 / TS 16949.Initiates measures to improve equipment performance, methods and quality.Manage all software and hardware installed on different types of equipment.Ensure minimal downtimes, proper documentation, software backups and version control.Robot programming, fault finding design changes.Continuous robotic improvement of weld quality, sealer quality and location accuracy.Installation of new equipment with regards to robots includes the initial setup of the robot and the parameters thereof. The setup and calibration of the weld gun. The parameter setup and programming of sealer systems. To commission and delegate newly installed equipment.Reporting / presenting and escalate to management as needed.Responsible for preventive maintenance updates on the robots and related equipment.Optimization of preventive maintenance jobs based on break down analysis and findings.To lead, set up and participate in cross-functional team meetings.The propensity to take the lead in any breakdown situation.Design, fault find and program using PLCs, HMI and SCADA.Ability to read blueprints, AutoCAD, E-Plan, interpret and modify electrical schematics.Performs other work-related duties as assigned.Must be prepared to work shifts, and overtime as required.Train and develop training documentation for maintenance personnel.Improve body shop equipment uptime using data analysis and preventative maintenance planningUndertake r
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly9lbi16YS53aGF0am9icy5jb20vY29vcG9iX19jcGxfX18xMjY2XzQzMTQzX180OTc/dXRtX3NvdXJjZT1ndW10cmVlJnV0bV9tZWRpdW09ZmVlZCZrZXl3b3JkPQ==&jid=1157051&xid=1266_43143
2y
1
SavedSave
Our client who is Consulting Engineers based in Centurion are urgently looking for a Civil Engineer. You will have more than 5 years’ experience and Pr Eng or Pr Tech registered. A master’s degree and/or Pr PM registrations will be a bonus. They are looking for a competent Sewer, Water and Stormwater Design Engineer with at least 5 years municipal drainage and reticulation networks, master planning, floodline determination and external buildings infrastructure design experience. You will be fully efficient in the use of the Civil Designer or Civil 3D design packages and have valid driver’s licence.
ECSA Professional
Remuneration between R55k – R65k, depending on experience and qualifications (Negotiable)
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMDA4ODE1Mzc2P3NvdXJjZT1ndW10cmVl&jid=1283433&xid=3008815376
16h
1
SavedSave
Introduction
A well-established Engineering consultancy based in Centurion is looking for an experienced Marketing Coordinator to join their dynamic team.
Desired Experience & Qualification
Marketing Coordinator with sound experience in;
Facebook campaignsZOHO digital marketing campaignsGraphic designBrand developmentMedia and agency engagementContent generation
Package & Remuneration
R 20 000 CTC pm. (Negotiable)
Interested?
Please send your CV to hr1@peopledimension.co.za
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80MTczNDMyMTI/c291cmNlPWd1bXRyZWU=&jid=1262630&xid=417343212
17h
1
SavedSave
Qualifications• BEng Degree – Mechanical, Mechatronic, Industrial, Electrical or Electronic• Matric with at least 6 distinctions, or an average of 85% (Non-negotiable)
Responsibilities and duties will include:• Promote the company’s products/services addressing or predicting clients’ objectives• Prepare sales contracts ensuring adherence to law-established rules and guidelines• Develop goals for the development team and business growth and ensure they are met• Keep record of sales, revenue, invoices and travel itineraries• Provide trustworthy feedback and after-sales support• Develop a growth strategy focused both on financial gain and customer satisfaction• Conduct research to identify new markets and customer needs• Contact potential clients to establish a network and arrange meetings (Foreign and domestic)• Identify new markets and improve sales• Plan and oversee new marketing initiatives• Attend conferences, meetings, and industry-related eventsAdditional information
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zMzE4MzE3Nzc/c291cmNlPWd1bXRyZWU=&jid=1752833&xid=331831777
17h
1
The main duties associated with the position include the following:
Rehabilitation design of opencast and mine residue facilitiesStormwater designs associated with rehabilitated landformsFinancial provision determination aligned with the latest regulationsQuantitative risk assessments associated with mining activitiesRunning and debugging of programs developed for earthworks movement, survey manipulation, etc.Developing of new code as and when required for predictive modelling, earthworks movement, stormwater design and quantitative risk assessments
The requirements associated with the position are as follows (mandatory):
0 – 3 years of relevant experienceApplicable MEng or MSc Eng degreeGood fundamental understanding and knowledge of storm water design and/or Earthworks movementCandidate should be proficient in MS Word, MS Excel, MS Outlook and MS PowerPointCandidate should be proficient in AutoCad Civil 3D or MicrostationThe candidate should be inclined towards programming in python/VBA
Preference to candidates with the following attributes:
Experience in storm water management and/or earthworks movementExperience with Conceptual designs, Preliminary designs, Detailed designs, and Construction drawings and tender documents (i.e. BOQ’s and works information) is preferableProficiency in VBA/Python coding will be advantageousGood critical thinking and problem-solving skillsGood communication skills, fluent in EnglishDynamic, self-motivated, takes responsibility and ownership of tasksAble to manage time effectivelyAttention to detail
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yODIwNDUxOTQ/c291cmNlPWd1bXRyZWU=&jid=1513441&xid=282045194
18h
1
SavedSave
Duties:
You will be working with our customers to define and deliver SOLIDWORKS solutions on time and within budget, whilst ensuring the maximum levels of Customer satisfaction.You will provide our customers the highest quality technical support on queries relating to SOLIDWORKS and SOLIDWORKS PDM with its associated infrastructure, troubleshooting to find the optimal solution via the telephone, email or ‘one to one’ using collaborative Internet support services.You will actively contribute to the creation and delivery of on-line content such as Blogs, Technical Documents and Webcasts.You may also be asked to provide training, online, at our premises or on site. Training the customers on the use of SOLIDWORKS and related products.Any additional duties / tasks as required by your support manager.
Minimum Requirements:
Formal Education & Certification
You will possess a higher-level qualification, Eng, NDip, or be able to demonstrate suitable previous experience, in Mechanical Engineering or another relevant technical fieldMCSE: Data Management and Analytics certificate (not mandatory but beneficial)MCSA: SQL Server 2016 database development certificate (not mandatory but beneficial)
Knowledge & Experience
Experience in CAD, preferably SOLIDWORKS but not limited to2 Years relevant working experience Basic PC Hardware Concepts, Technology, and Installation Basic PC TroubleshootingStrong problem solving and analytical skillsExperience in SOLIDWORKS (not mandatory but beneficial)Customer services (not mandatory but beneficial)
Personal Attributes
You will possess excellent communication skills, verbal and written and be a good listenerCapable of working independently and in a team
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMzM5NzcyODk0P3NvdXJjZT1ndW10cmVl&jid=1217091&xid=1339772894
18h
Save this search and get notified
when new items are posted!