Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Home & Garden
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Results for water tanks in "water tanks" in Tanks & Water Storage Tanks in South Africa in South Africa
3
R 500
SavedSave
500L Pool backwash/water storage tank. No cracks or leaks.
3d
VERIFIED
3
R 950
NEGOTIABLE
SavedSave
Vega 0.5 HP Booster water pumpUsed in Good conditionFaulty pressure switch
6d
VERIFIED
2
R 1,400
NEGOTIABLE
SavedSave
Brand new and sealed.See pictures for description details
1d
Parow1
R 2,500
SavedSave
Size of tank 150cm x 50cm..Can use as hothub or braai..
10d
Muizenberg1
R 34,282.99
SavedSave
Please note that shipping and installation is not included.
3d
Mbombela / Nelspruit1
R 4,690
SavedSave
Please note that shipping and installation is not included.The new DAB Feka submersible pump 0.55kW were redesigned to mark the
occasion of forty years on the market and to make them even more
reliable, robust and ergonomic.
The submersible pump of the FEKA series is suitable for lifting
sewage water from cesspools, and is capable of handling suspended solid
matter with size up to 25 mm.
As has been noted high performance. NOVA and FEKA have professional
features such as the oil chamber triple seal and lubricated bearings.
Being that better protection against corrosion Motor in AISI 304
stainless steel and shaft in AISI 431 steel for better protection
against corrosion.
Technical Data
Operating range:
Flow rate up to 16 m3/h with head up to 7.5 meters
Liquid temperature range:
From 0 °C to +35 °C for domestic use. From 0 °C to +50 °C for other uses.
Output
1.1/4″ F
Pumped liquid:
Cesspool sewage water.
Max. immersion depth: 7 meters.
Maximum dry run time: 1 minute.
Protection class: IP 68.
Insulation class: F.
Free Passage: 25 mm
Most important the DAB Feka submersible pump 0.55kW with back flowing
impeller is suited to all clean and waste water loaded with solids
measuring up to 25 mm.It can be used to empty tanks, vats or cisterns,
drain flooded basements, cellars and garages, and prevent flooding when
installed in rainwater wells.It can also be used as a portable pump in
emergencies to drain water out of flooded rooms where there is mud or
detritus.
Domestic waste waterRainwater or groundwaterEmptying of wells or collection tanksEmptying of swimming pools or rooms prone to flooding
2d
Mbombela / Nelspruit1
Contact f/price
SavedSave
Please note that shipping and installation is not included.The new DAB Nova submersible pump 0.25kW were redesigned to mark the
occasion of forty years on the market and to make them even more
reliable, robust and ergonomic.
As has been noted high performance. NOVA and FEKA have professional
features such as the oil chamber triple seal and lubricated bearings.
Being that better protection against corrosion Motor in AISI 304
stainless steel and shaft in AISI 431 steel for better protection
against corrosion.
Technical Data
Operating range:
Flow rate up to 16 m3/h with head up to 10.2 meters
Liquid temperature range:
From 0 °C to +35 °C for domestic use. From 0 °C to +50 °C for other uses.
Output
1.1/4″ F
Pumped liquid:
Cesspool sewage water.
Max. immersion depth: 7 meters.
Maximum dry run time: 1 minute.
Protection class: IP 68.
Insulation class: F.
Free Passage: 10 mm
Most important the DAB Nova submersible pump 0.25kW line with open
impeller is suited to all clean and waste water with solids measuring up
to 10 mm. It can be used to empty tanks, vats or cisterns, drain
flooded basements, cellars and garages, and prevent flooding when
installed in rainwater wells.It can also be used as a portable pump in emergencies to drain water
out of flooded rooms. They can also be used for emptying tanks or
cisterns. The pumps are suitable for drainage of flooded basements,
cellars and garages or to prevent flooding when installed in rainwater
collector wells, which can also be used as a portable pump in emergency
situations to drain water from flooded premises.
2d
Mbombela / Nelspruit1
R 2,986
SavedSave
Please note that shipping and installation is not included.The new DAB Nova submersible pump 0.20kW were redesigned to mark the
occasion of forty years on the market and to make them even more
reliable, robust and ergonomic.
As has been noted high performance. NOVA and FEKA have professional
features such as the oil chamber triple seal and lubricated bearings.
Being that better protection against corrosion Motor in AISI 304
stainless steel and shaft in AISI 431 steel for better protection
against corrosion.
Technical Data
Operating range:
Flow rate up to 16 m3/h with head up to 10.2 meters
Liquid temperature range:
From 0 °C to +35 °C for domestic use. From 0 °C to +50 °C for other uses.
Output
1.1/4″ F
Pumped liquid:
Cesspool sewage water.
Max. immersion depth: 7 meters.
Maximum dry run time: 1 minute.
Protection class: IP 68.
Insulation class: F.
Free Passage: 5mm
Most important the DAB Nova submersible pump 0.20kW line with open
impeller is suited to all clean and waste water with solids measuring up
to 10 mm. It can be used to empty tanks, vats or cisterns, drain
flooded basements, cellars and garages, and prevent flooding when
installed in rainwater wells.
It can also be used as a portable pump in emergencies to drain water
out of flooded rooms. They can also be used for emptying tanks or
cisterns. The pumps are suitable for drainage of flooded basements,
cellars and garages or to prevent flooding when installed in rainwater
collector wells, which can also be used as a portable pump in emergency
situations to drain water from flooded premises.
2d
Mbombela / Nelspruit1
R 989.87
SavedSave
Please note that shipping and installation is not included.Multi-Jet brass water meter with tails & reed switches – 20mm
Characteristics:
– Firstly all the Materials in contact with water, consciously selected by the known resistance to corrosion
– Can be used safely in water temperature up to 50℃(T50)
– The indicator register is of 5 Rollers (Dn40/Dn50 with 6 Rollers) and 4 Pointers
– The Impeller is the only moving part in contact with water
– The extra inlet filter at the inlet of the meter body permits cleaning it without breaking the metrological seal
– They come with Magnetic Protection against the external influences
Finally the Pulse Emitter Device consists of a plastic housing with
Reed Switch, and 1,5 m cable with 2 cores in Red and Black. Option with 2
reed switches and 1,5 m cable with 3 cores in Red, Black
Blue Electric Data: Vmax=24AC/DC; I max=0,01A Capacity of the Pulse Emitter:
Magnet Position Litre/Pulse
x0,001 10
Multi-Jet brass water meter with tails & reed switches – 20mm Installation Requirements:
Straightaway must be installed on a horizontal pipeline only.The pipeline must be flushed before installation.The meters should be constantly full of water during operation.
2h
Mbombela / Nelspruit1
R 1,851.82
SavedSave
Please note that shipping and installation is not included. Multi-Jet brass water meter with tails & reed switches – 32mm
Characteristics:– Firstly all the Materials in contact with water, consciously selected by the known resistance to corrosion
– Can be used safely in water temperature up to 50℃(T50)
– The indicator register is of 5 Rollers (Dn40/Dn50 with 6 Rollers) and 4 Pointers
– The Impeller is the only moving part in contact with water
– The extra inlet filter at the inlet of the meter body permits cleaning it without breaking the metrological seal
– They come with Magnetic Protection against the external influences
Finally the Pulse Emitter Device
consists of a plastic housing with Reed Switch, and 1,5 m cable with 2
cores in Red and Black. Option with 2 reed switches and 1,5 m cable with
3 cores in Red, Black
Blue Electric Data: Vmax=24AC/DC; I max=0,01A Capacity of the Pulse Emitter:
Magnet Position Liter/Pulse
x0,001 10
Brass Flow Meter with 1:1 pulse output for use with a Seko APG603 dosing pump or similar
Multi-Jet brass water meter with tails & reed switches – 32mm Installation Requirements:
Straightaway must be installed on a horizontal pipeline only.The pipeline must be flushed before installation.The meters should be constantly full of water during operation.
2h
Mbombela / Nelspruit1
R 3,222.99
SavedSave
Please note that shipping and installation is not included.Multi-Jet brass water meter with tails & reed switches – 32mm
Characteristics:– Firstly all the Materials in contact with water, consciously selected by the known resistance to corrosion
– Can be used safely in water temperature up to 50℃(T50)
– The indicator register is of 5 Rollers (Dn40/Dn50 with 6 Rollers) and 4 Pointers
– The Impeller is the only moving part in contact with water
– The extra inlet filter at the inlet of the meter body permits cleaning it without breaking the metro logical seal
– They come with Magnetic Protection against the external influences
Finally the Pulse Emitter Device
consists of a plastic housing with Reed Switch, and 1,5 m cable with 2
cores in Red and Black. Option with 2 reed switches and 1,5 m cable with
3 cores in Red, Black
Blue Electric Data: Vmax=24AC/DC; I max=0,01A Capacity of the Pulse Emitter:
Magnet Position Liter/Pulse
x0,001 10
Brass Flow Meter with 1:1 pulse output for use with a Seko APG603 dosing pump or similar
Multi-Jet brass water meter with tails & reed switches – 32mm Installation Requirements:
Straight away must be installed on a horizontal pipeline only.The pipeline must be flushed before installation.The meters should be constantly full of water during operation.
2h
Mbombela / Nelspruit1
R 1,439.48
SavedSave
Please note that shipping and installation is not included.
Multi-Jet brass water meter with tails & reed switches – 25mm
Characteristics:– Firstly all the Materials in contact with water, consciously selected by the known resistance to corrosion
– Can be used safely in water temperature up to 50℃(T50)
– The indicator register is of 5 Rollers (Dn40/Dn50 with 6 Rollers) and 4 Pointers
– The Impeller is the only moving part in contact with water
– The extra inlet filter at the inlet of the meter body permits cleaning it without breaking the metro logical seal
– They come with Magnetic Protection against the external influences
Surprisingly the Pulse Emitter Device consists of a plastic housing
with Reed Switch, and 1,5 m cable with 2 cores in Red and Black. Option
with 2 reed switches and 1,5 m cable with 3 cores in Red, Black
Blue Electric Data: V max=24AC/DC; I max=0,01A Capacity of the Pulse Emitter:
Magnet Position Liter/Pulse
x0,001 10
Multi-Jet brass water meter with tails & reed switches – 25mm Installation Requirements:
Straightaway must be installed on a horizontal pipeline only.The pipeline must be flushed before installation.The meters should be constantly full of water during operation.
2h
Mbombela / Nelspruit1
R 2,848.84
SavedSave
Please note that shipping and installation is not included.
Firstly the Multi-Jet brass hot water meter – 25mm. Measurement of
volume of cold or hot potable water consumption. Suitable for both
domestic and small business applications.
FEATURES
Approved to SANS1529 -1: 2019 Class B specifications. (SA 1566).For Horizontal installation.Clear, easily read, dry dial counter. Reads to 0.0002m3.Cold water meter working temperature ≤ 50°C.Hot water meter working temperature ≤ 90°C.The strainer is removable for maintenance in the eld.Working pressure 1600 kPa.Suitable for measuring potable water.Inlet and Outlet threads are compatible with ISO metric sizes.Dezincication Resistant Brass body (DZR).Less susceptible to damage caused by suspended solids.Pulse prepared – different settings available. (To be specified).Recalibrated possible in a SANAS-accredited verification laboratory.
Installation Instructions
Thank you for choosing The Water Company’s Multi-Jet brass hot water meter – 25mm.
This device has undergone thorough testing and verification at
Precision Meters’ SANAS Accredited Verification Laboratory, conducted by
a certified Verification Officer, to ensure it meets SANS 1529-1:2019
Class B specifications. It is supplied in full working order.
As a precision instrument, the water meter features exacting
tolerances between its moving parts and is designed exclusively for
measuring potable water. Exposure to grit, sand, or other suspended
solids can cause permanent damage to the meter. Such damage incurred
during installation is not covered by The Water Company warranty.To ensure proper installation, it is imperative that the installer
maintains cleanliness throughout the process. Thoroughly flush the
pipeline before installing the meter.
1d
Mbombela / Nelspruit1
R 1,738.80
SavedSave
Please note that shipping and installation is not included.
Firstly the
Multi-Jet brass hot water meter – 20mm. Measurement of volume of cold or
hot potable water consumption. Suitable for both domestic and small
business applications.
FEATURES
Approved to SANS1529 -1: 2019 Class B specifications. (SA 1566).For Horizontal installation.Clear, easily read, dry dial counter. Reads to 0.0002m3.Cold water meter working temperature ≤ 50°C.Hot water meter working temperature ≤ 90°C.The strainer is removable for maintenance in the eld.Working pressure 1600 kPa.Suitable for measuring potable water.Inlet and Outlet threads are compatible with ISO metric sizes.Dezincication Resistant Brass body (DZR).Less susceptible to damage caused by suspended solids.Pulse prepared – different settings available. (To be specified).Recalibrated possible in a SANAS-accredited verification laboratory.
Installation Instructions
Thank you for choosing The Water Company’s Multi-Jet brass hot water meter – 20mm.
This device has undergone thorough testing and verification at
Precision Meters’ SANAS Accredited Verification Laboratory, conducted by
a certified Verification Officer, to ensure it meets SANS 1529-1:2019
Class B specifications. It is supplied in full working order.
As a precision instrument, the water meter features exacting
tolerances between its moving parts and is designed exclusively for
measuring potable water. Exposure to grit, sand, or other suspended
solids can cause permanent damage to the meter. Such damage incurred
during installation is not covered by The Water Company warranty.To ensure proper installation, it is imperative that the installer
maintains cleanliness throughout the process. Thoroughly flush the
pipeline before installing the meter.
1d
Mbombela / Nelspruit1
R 250
SavedSave
Please note that shipping and installation is not included.Fully automatic float valve for water level control
Size: 1″
Automatic water level control float valves are devices designed to maintain desired water levels in tanks, pools, and troughs without manual intervention, ensuring efficient water management.
Automatic float valve for water level control operate based on a float mechanism that detects water levels. When the water level drops below a preset point, the float valve opens to allow water to flow in. Once the water reaches the desired level, the float rises and closes the valve, stopping the water flow.
This process ensures that the water level remains consistent without the need for electricity, making it an efficient solution for various applications.
15d
Mbombela / Nelspruit4
R 12,000
NEGOTIABLE
SavedSave
Nutec Fibre Cement Pine flooringTimber structure Double door 1.8m x 2.4m Price includes Delvery and installation within Centurion.
5d
Centurion1
R 10,308.60
SavedSave
Please note that shipping and installation is not included.
Firstly the Multi-Jet brass hot water meter – 50mm. Measurement of
volume of cold or hot potable water consumption. Suitable for both
domestic and small business applications.
FEATURES
Approved to SANS1529 -1: 2019 Class B specifications. (SA 1566).For Horizontal installation.Clear, easily read, dry dial counter. Reads to 0.0002m3.Cold water meter working temperature ≤ 50°C.Hot water meter working temperature ≤ 90°C.The strainer is removable for maintenance in the eld.Working pressure 1600 kPa.Suitable for measuring potable water.Inlet and Outlet threads are compatible with ISO metric sizes.Dezincication Resistant Brass body (DZR).Less susceptible to damage caused by suspended solids.Pulse prepared – different settings available. (To be specified).Recalibrated possible in a SANAS-accredited verification laboratory.
Installation Instructions
Thank you for choosing The Water Company’s Multi-Jet brass hot water meter – 50mm.
This device has undergone thorough testing and verification at
Precision Meters’ SANAS Accredited Verification Laboratory, conducted by
a certified Verification Officer, to ensure it meets SANS 1529-1:2019
Class B specifications. It is supplied in full working order.
As a precision instrument, the water meter features exacting
tolerances between its moving parts and is designed exclusively for
measuring potable water. Exposure to grit, sand, or other suspended
solids can cause permanent damage to the meter. Such damage incurred
during installation is not covered by The Water Company warranty.To ensure proper installation, it is imperative that the installer
maintains cleanliness throughout the process. Thoroughly flush the
pipeline before installing the meter.
1d
Mbombela / Nelspruit1
R 5,666.63
SavedSave
Please note that shipping and installation is not included.
Firstly the Multi-Jet brass hot water meter – 40mm. Measurement of
volume of cold or hot potable water consumption. Suitable for both
domestic and small business applications.
FEATURES
Approved to SANS1529 -1: 2019 Class B specifications. (SA 1566).For Horizontal installation.Clear, easily read, dry dial counter. Reads to 0.0002m3.Cold water meter working temperature ≤ 50°C.Hot water meter working temperature ≤ 90°C.The strainer is removable for maintenance in the eld.Working pressure 1600 kPa.Suitable for measuring potable water.Inlet and Outlet threads are compatible with ISO metric sizes.Dezincication Resistant Brass body (DZR).Less susceptible to damage caused by suspended solids.Pulse prepared – different settings available. (To be specified).Recalibrated possible in a SANAS-accredited verification laboratory.
Installation Instructions
Thank you for choosing The Water Company’s Multi-Jet brass hot water meter – 40mm.
This device has undergone thorough testing and verification at
Precision Meters’ SANAS Accredited Verification Laboratory, conducted by
a certified Verification Officer, to ensure it meets SANS 1529-1:2019
Class B specifications. It is supplied in full working order.
As a precision instrument, the water meter features exacting
tolerances between its moving parts and is designed exclusively for
measuring potable water. Exposure to grit, sand, or other suspended
solids can cause permanent damage to the meter. Such damage incurred
during installation is not covered by The Water Company warranty.To ensure proper installation, it is imperative that the installer
maintains cleanliness throughout the process. Thoroughly flush the
pipeline before installing the meter.
1d
Mbombela / Nelspruit3
R 8,000
NEGOTIABLE
SavedSave
DAB E.Sybox Mini 3 with 2 years usage in good condition.
8d
Parkwood1
R 43,394
SavedSave
Please note that shipping and installation is not included.
10d
Mbombela / NelspruitSave this search and get notified
when new items are posted!
