Please note that our Terms & Conditions and Privacy Notice are applicable.
On Promotion in Home & Garden
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Results for Tanks & Water Storage Tanks in South Africa in South Africa
2
R 1,800
NEGOTIABLE
SavedSave
2500 liters jojo tank for sale, I am in Wells estate. 084 285 3938
16h
Port Elizabeth
3
R 8,000
NEGOTIABLE
SavedSave
DAB E.Sybox Mini 3 with 2 years usage in good condition.
1d
Parkwood
1
R 5,887
SavedSave
Please note that shipping and installation is not included.Firstly the DAB Esylink has 4 inputs and 2 outputs with wireless
interface 802.15.4, designed to allow the esybox to use digital inputs
(pressure switch, float, etc.), to control 2 volt free relay outputs
(alarms, etc.) and to offer the possibility of connecting an auxiliary
pressure sensor.
Input IN1 / IN2 / IN3 / IN4:
Function external Float SwitchFunction auxiliary set pointFunction system disabling and fault resetFunction Low Pressure detection (KIWA)
Output OUT1 / OUT2:
Communication active alarmCommunication motor running status
Wireless Communication: Establishes a wireless connection (using 802.15.4) between DAB devices like Esybox and other compatible products.
Software Updates: Enables software updates for E.Sybox, E.Sybox Mini, and EsySwim.
Relay Outputs: Provides two volt-free relay outputs that can be used for alarm notifications and other control purposes.
KIT ESYLINK supplied with:
ESYLINK with the USB cable as well as 8DIN electric box, feeder and finally three cable clamps.
Important to realize ESYLINK can also be used
to update the software version on the esybox, esybox mini and e.swim.
To give it the latest available version.In conclusion, the Esylink
acts as a bridge, allowing users to remotely monitor and control their
DAB water management systems, enhancing their functionality and ease of
use.
1d
Mbombela / Nelspruit
1
R 1,164
SavedSave
Please note that shipping and installation is not included.First thing to realize is the DAB Esycover for EsyBox Premium 1.1kW is an accessory for install the Esybox Premium in partially external installation (under a balcony or a front porch). Particularly when installed in partially outdoor locations like under a balcony or porch. It
shields the pump’s control panel and screen from the elements,
including rain and debris and other elements, ensuring optimal
performance and extending the pump’s lifespan.
More about DAB Esycover for EsyBox Premium 1.1kW
Protection: The Easy Cover is a plastic cover that protects the
E.sybox’s control panel and LED display from rain, sunlight, and other
outdoor elements. Easy Installation: It’s designed for easy installation and does not include the E.sybox pump itself.Material: The cover is made of durable, weather resistant materials.Application: Ideal for outdoor installations such as balconies, porches, or semi enclosed areas.Compatibility: Specifically designed for the E.sybox and E.sybox Mini 3 models.Color: The Easy Cover is typically green, allowing it to blend into outdoor environments perfectly.
Esycover Specifications:
Material: Durable, weather-resistant plastic.Compatibility: E sybox and E sybox Mini 3.Installation: Easy to install.Purpose: Protects the pump’s control panel and screen from the elements.Additional Notes: Does not include the E sybox pump.
1d
Mbombela / Nelspruit
1
R 36,552
SavedSave
Please note that shipping and installation is not included.Firstly creating two-pump sets has never been easier with the EsyBox
Mini twin kit premium 0.75kW. Outstanding performance with a 50% smaller
footprint than equivalent traditional systems.
2 Esybox with Esytwin from DAB is a electronic pressurization set
designed for pressurization. Lifting water from the underground (up to 8
m), gardening and irrigation tasks in domestic, residential and civil
and commercial areas. The group is “all included”, each Esybox includes in addition to the multi-impeller pump an expansion tank,
a display and the wireless connection. The 2 Esybox with Esytwin is
particularly silent and allows to increase the water pressure in the
home and to keep it constant even in the presence of more contemporary
requests. The inverter function allows energy saving and protection
against hammering. There is a wizard for the first start and the
possibility to view the alarm history. The group is easy to configure
and is also equipped with wireless connection. Possibility of remote
control thanks to the DConnect service (DConnect Box supplied separately).
EsyBox Mini twin kit premium 0.75kW is a booster pump designed for
use with drinking water in domestic systems and gardening applications.
It’s a compact product with integrated components that allows simple and
efficient domestic pressurisation management.
USE
Villas and small apartment complexes with up to 6 floors and 9 apartments.Finally assigning the starting order Each time the system is switched
on a starting order is associated with each device. Depending on this,
the sequential starts of the devices are decided.
1d
Mbombela / Nelspruit
1
R 16,766
SavedSave
Please note that shipping and installation is not included.DAB EsyBox Mini 0.75kW is the booster pump for the management of
pressurisation in home and gardening systems. In a very small space, it
utilises the most advanced DAB technology. To ensure constant pressure,
and with thanks to the integrated inverter it has an increased reduction
in noise and consumption levels. Creating two-pump groups via wireless
increases their performance, introduces the back-up function and allows
the replacement of obsolete sets.
BUILT-IN CONNECTIVITY
The Esybox Mini3 user experience is enhanced by the introduction of
built-in connectivity, through which it can connect natively to cloud
services without requiring any additional accessories.
MINIMUM SPACE REQUIREMENTS, MAXIMUM QUIET
The water-cooled engine, the variable-frequency drive electronics,
sound-proofed housing and the anti vibration feet make it an extremely
quiet booster pump that even defies the lightest sleeper. Small and
extremely compact, the Esybox Mini3 can also be installed in previously
unthinkable places.
USE
Finally DAB EsyBox Mini 0.75kW apartments with up to 3 floors, 2 bathrooms and 50 m2 of garden.
Pump Specifications:
Pump Model: EsyBox Mini3Max Input Power: 850WMotor Power: 750WLow NoiseMax Flow: 80 lt/minMax Pressure: 5.5 BarMax Fluid Temperature: 40˚CMax Ambient Temperature: 50 ˚C
1d
Mbombela / Nelspruit
1
R 46,547
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 9.2kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 9.2kW – three phase
Maximum operating pressure: 8 bar (800 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2.1/2″
Outlet: 2″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
3d
Mbombela / Nelspruit
1
R 46,790
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 9.2 kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 9.2 kW – three phase
Maximum operating pressure: 10 bar (1000 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2.1/2″
Outlet: 2″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
3d
Mbombela / Nelspruit
1
R 43,394
SavedSave
Please note that shipping and installation is not included.
3d
Mbombela / Nelspruit
1
R 36,363
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 5.5kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 5.5kW – three phase
Maximum operating pressure: 8 bar (800 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2.1/2″
Outlet: 2″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
3d
Mbombela / Nelspruit
1
R 47,880
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 11 kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 11 kW – three phase
Maximum operating pressure: 8 bar (800 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2.1/2″
Outlet: 2″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
3d
Mbombela / Nelspruit
1
R 6,425
SavedSave
Please note that shipping and installation is not included.DAB Centrifugal single impeller K pump 0.75kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB Centrifugal single impeller K pump 0.75kW – three phase
Maximum operating pressure: 6 bar (600 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V / 50 Hz up to 4 kW included – 400 V ∆ 50 Hz from 5,5 kW
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″
Outlet: 1.1/2″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
3d
Mbombela / Nelspruit
1
R 4,122
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 0.75kW – single phase
centrifugal pump is suitable for domestic, civil, industrial and
agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 0.75kW – single phase
Maximum operating pressure: 6 bar (600 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Single-phase 220-240 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1″
Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
3d
Mbombela / Nelspruit
1
R 49,091
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 9.2kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller. As can been seen on data sheet
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 9.2kW – three phase
Maximum operating pressure: 12 bar (1200 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2″
Outlet: 1.1/4″
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
3d
Mbombela / Nelspruit
1
R 38,182
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 5.5kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 5.5kW – three phase
Maximum operating pressure: 12 bar (1200 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2″
Outlet: 1.1/4″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
3d
Mbombela / Nelspruit
1
R 20,000
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 4kW – three phase is suitable
for domestic, civil, industrial and agricultural systems, and for
decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller. As can been seen on data sheet
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 4kW – three phase
Maximum operating pressure: 12 bar (1200 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″
Outlet: 1″
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
3d
Mbombela / Nelspruit
1
R 16,545
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 2.2kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller. As can been seen on data sheet
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 2.2kW – three phase
Maximum operating pressure: 10 bar (1000 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″
Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
3d
Mbombela / Nelspruit
1
R 9,393
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 1.1kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller. As can been seen on data sheet
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 1.1kW – three phase
Maximum operating pressure: 6 bar (600 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″
Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
3d
Mbombela / Nelspruit
1
R 9,273
SavedSave
Please note that shipping and installation is not included.DAB Centrifugal double impeller K pump 1.1kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller. As can been seen on data sheet
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB Centrifugal double impeller K pump 1.1kW – three phase
Maximum operating pressure: 8 bar (800 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMPInlet: 1.1/4″Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
3d
Mbombela / Nelspruit
1
R 7,576
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 0.75kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 0.75kW – three phase
Maximum operating pressure: 6 bar (600 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:Three-phase 230 V -400 V
CONSTRUCTION FEATURES OF THE PUMPInlet: 1″Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
3d
Mbombela / NelspruitSave this search and get notified
when new items are posted!