Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Home & Garden
Filter & refine
Clear All
Results for a home in Water Purifiers & Geysers in Mbombela / Nelspruit
1
R 16,293.83
SavedSave
The Seko TPR603 is ideal for pH/conductivity control in a single
unit. The pump includes a controller with adjustable feedback loop
parameters and is capable of dosing an acids or bases to a pH setpoint.
Please note that probes are sold separately.
Supplied with Viton seals as standard. Please specify alternative EPDM seals for chemicals such as caustic lye.
What’s in the box:
Complete pump and controllerRemovable base/stand6mm suction (4m) and delivery tube (2m)Foot valveInjector
TPR Manual
TPR Brochure
3d
1
R 13,685
SavedSave
Seko TPG800 is a digital solenoid-driven dosing pump with constant
flow rate that can be adjusted manually or with proportional flow rate
according to an external analogue (4÷20 mA) or digital pulse signal such
as a water meter.
The pump is also equipped with a manual priming pump for the start
up and comes complete with a standard installation kit, which includes a
PVDF foot filter and injection valve, PVC suction tube and PE delivery
tube. A PVDF-T installation kit is available on request.
3d
1
R 9,982.58
SavedSave
Supplied with Viton seals as standard. Please specify alternative EPDM seals for chemicals such as caustic lye.
What’s in the box:
Complete pumpRemovable base/stand6mm suction (4m) and delivery tube (2m)Foot valveInjector
3d
1
R 7,107
SavedSave
The Seko AKS603 reliable dosing pump with a manual adjusting dial for
accurately dosing a constant flow rate into a tank or pressurised
pipeline. The pump is switched on/off via a relay or flow switch to
start/stop dosing at the rate set on the dial. There are two frequency
settings: 0-20% and 0-100%. Suitable for a wide range of solids free
liquid chemical or fertiliser dosing application.
Delivers 4l/hr at 12 bar line pressure up to a maximum flow rate of 8l/hr at 2 bar.
The complete standard installation kit is composed of: foot filter
and injection valve, PVC suction tube, PE delivery tube and wall fixing
bracket.
Specifications:
-Inlet/outlet: 4/6mm inside/outside diameter
-Power: 220V, 12.5W
-Max stoke frequency: 160 /min
-Casing made of PP reinforced with glass fibre
-IP 65 rated
-PTFE diaphragm
-Level control input
-Priming valve
-Installation kit and pump head material: PVDF with ceramic balls
-Viton (FPM) seals as standard. Please note that EPDM seals are required for chemicals such as caustic lye.
3d
1
R 917.35
SavedSave
These Polyethylene tanks are suitable for the storage and dosing of fluid chemicals. The tanks feature a moulded litre scale.
The top features a large screw cap and surfaces for mounting dosing pumps, mixers and level control.
3d
1
R 1,725
SavedSave
These Polyethylene tanks are suitable for the storage and dosing of
fluid chemicals. The tanks do not feature a moulded litre scale.
The top features a large screw cap and surfaces for mounting dosing pumps, mixers and level control.
3d
1
R 2,421.90
SavedSave
These Polyethylene tanks are suitable for the storage and dosing of fluid chemicals. The tanks feature a moulded litre scale.
The top features a large screw cap and surfaces for mounting dosing pumps, mixers and level control.
3d
1
R 4,600
SavedSave
Technical Specification:
Flow: 0.48 ~ 15.20 L/hPressure: 8.2 ~ 1.8 BarFeatures
LCD displayAdjust the flow by keyCycle timerFrequency or percentage modelOptional automatic control by an external signal
3d
1
R 3,937.14
SavedSave
A versatile, multi-model solution within the SEKO solenoid dosing
pumps range, the wall-mounted Kompact series is ideal for cost-critical
applications with small delivery requirements such as chemical dosing
systems for swimming pools.
Among the energy-saving features of the Kompact chemical dosing pumps
range is a stabilized multi power supply, which draws the precise
quantity of power required to activate the pump. This optimizes
efficiency and ensures power supply fluctuations do not jeopardise
performance.
Kompact is built with the superior components you expect from a SEKO
product, including ceramic ball valves, PTFE diaphragm and PVDF-T pump
head (PVDF optional). This delivers exceptional chemical compatibility
with wetted parts for outstanding life expectancy and reduced
maintenance requirement.
3d
1
R 4,489.83
SavedSave
Type: Round
Material: hdpe (high density polyethylene)
Moulding: By injection
Brine Tank colour: White
Cover Colour: White
3d
1
R 1,150
SavedSave
FOR DOSING TANK 100L ONLY
Brine well Heigh: 44″ – 111cm.Connection: 3/8″Height: 91,3 cmWidth: 8,9 cm
3d
1
R 1,477.75
SavedSave
Type: Square
Material: hdpe (high density polyethylene)
Moulding: By injection
Brine Tank colour: Blue & Grey
Cover Colour: Blue
3d
1
R 1,480.05
SavedSave
Type: Square
Material: hdpe (high density polyethylene)
Moulding: By injection
Brine Tank colour: Blue & Grey
Cover Colour: Blue
3d
1
R 1,646.80
SavedSave
ype: Square
Material: hdpe (high density polyethylene)
Moulding: By injection
Brine Tank colour: Blue & Grey
Cover Colour: Blue
3d
1
R 2,082.65
SavedSave
Type: Round
Material: hdpe (high density polyethylene)
Moulding: By injection
Brine Tank colour: White
Cover Colour: White
3d
1
R 1,739.72
SavedSave
Normally Closed Solenoid
Solenoid valves help to control the flow of liquids … When a
normally closed solenoid valve is not powered, the plunger is down,
effectively sealing the valve and preventing the flow of liquids. Once
the normally closed solenoid valve is powered or energized, the magnetic
field causes the plunger to rise.
Solenoids offer fast and safe switching, high reliability, long
service life, good medium compatibility of the materials used, low
control power, and compact design.
We offer these Solenoids in Sizes: ½ inch, ¾ inch, 1 inch, 1.25 inch, 1.5 inches, and 2 inches. THE WATER COMPANYwww.watercompany.co.za
4d
1
R 5,318.98
SavedSave
Normally Closed Solenoid
Solenoid valves help to control the flow of liquids … When a
normally closed solenoid valve is not powered, the plunger is down,
effectively sealing the valve and preventing the flow of liquids. Once
the normally closed solenoid valve is powered or energized, the magnetic
field causes the plunger to rise.
Solenoids offer fast and safe switching, high reliability, long
service life, good medium compatibility of the materials used, low
control power, and compact design.
We offer these Solenoids in Sizes: ½ inch, ¾ inch, 1 inch, 1.25 inch, 1.5 inches, and 2 inches. THE WATER COMPANYwww.watercompany.co.za
4d
1
R 750.38
SavedSave
Glass Filter Media What is it?
A High-Tech Filter Media Virgin plate-glass Advanced Manufacturing Technology Slightly negative charge attract particles
Crushed Glass Media provides a viable alternative to sand. Made
from recycled glass, it doesn’t involve intrusive mining and the use of
scarce resources.
Available in:
Ultra Glass Filter Media 20kg Bag – Grade 0.597 – 1.4 mmUltra Glass Filter Media 20kg Bag – Grade 1.4 – 2 mm
25kg Bags
18d
1
R 1,400
SavedSave
The exchange process is about the ability of the resin bead to take on one ion while giving up another.
When the resin bead is fully loaded with sodium, it will readily give
off the sodium (Na+1) with one positive charge in exchange for calcium
(Ca+2) with two positive charges.
When all of the exchange sites are loaded with calcium or magnesium,
the resin beads are subjected to a high amount of salt (brine).
The high amount of salt in the brine forces the resin beads to give
up the sodium and magnesium that are held at the exchange sites, and
take on the sodium ions. The ions are exchanged. When the unit is
rinsed, all of the removed calcium and magnesium, along with the excess
salt that forced their removal are washed down the drain. We are left
with the charged beads and no excess salt in solution. The soft water
contains no additional sodium as the unit is put back online.
It is with a strong acid-based exchange of styrene, sulfonic acid
polymer, the reaction of the special procedures uniform size made of
plastic-type particles ball. In dealing with the use of soft water has
excellent, properties of strength and washing of the response properties
of heat resistance, the operation has a high capacity.
18d
1
R 948.75
SavedSave
DI resin is the
small bead-like substance that makes the entire water deionization
process tick. It catalyzes the ion exchange that rids the water of every
non-essential charged ion, creating highly purified water applicable
for medical, bio or laboratory use.Specifications:
Polymer Structure: Styrene/DVBBase Type: StrongPolymer Type: GelFunctional Group: TrimethylaminePhysical Form: Spherical BeadsIonic Form (as shipped): HydroxideTotal capacity: >1.0 meq/mL (OH Form)Water Retention: 55 to 60 percent (OH Form)Screen Size Distribution: 16 to 50 (U.S. Mesh)Maximum Fines Content: 1 percent (less than 50 Mesh)Minimum Sphericity: 93 percentUniformity Coefficient: 1.6 (Approximate)Resin Color: Blue
18d
Save this search and get notified
when new items are posted!
