Please note that our Terms & Conditions and Privacy Notice are applicable.
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Results for water pump 0.75kw in "water pump 0.75kw" in South Africa in South Africa
1
R 2,256.25
SavedSave
Please note that shipping and installation is not included.Seakoo JET100 230V 0.75kw water pump
2 pole induction motor.Single phase 220V, 50/60Hz; Three phase 380V, 50/60 Hz.Insulation: Class B/Class F.Protection: IP44.With capacitor and thermal overload protector.
Jet Pumps For Deep Well Material
Pump body: Cast Iron.Motor support: Aluminum.Impeller: Brass / PPO.Motor shaft: Stainless Steel or CS45#.Ejector: Cast Iron.Mechanical seal: Ceramic + Graphite.100% copper winding.
Jet Pumps For Deep Well Operating Conditions
◆ Liquid temperature up to +60℃.
◆ Ambient temperature up to +40℃.
◆ Max. working pressure: 8 bar.Firstly the Seakoo JET100 230V 0.75kw water pump. In this
situation, automatic pump is suitable for well points, irrigation. All
in all its good option for a booster pump to supply your home from the
water tanks. In addition the 0.75Kw motor ensure good strong pressure
for domestic applications.
6d
Mbombela / Nelspruit1
R 6,413.55
SavedSave
Please note that shipping and installation is not included.First thing to remember is the Pedrollo centrifugal CPM150 pump
0.75KW – single phase is suitable for use with clean water and liquids
that are not chemically aggressive towards the materials from which the
pump is made.
As a result of their reliability and the fact that they are easy to
use, these pumps are widely used in domestic and civil applications such
as the distribution of water in combination with small and medium sized
pressure sets, for transferring liquids and for the irrigation of
gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit: Firstly temperature of the liquid from -10 °C to +90 °C Ambient Temperature to +40 °C Manometric suction lift up to 7 mMax. working pressure: 6 bar for CP 100m
Performance Range:
Flow rate up to 160 l/min (9,6 m³/h) Head up to 56 m
2d
Mbombela / Nelspruit1
R 2,984.25
SavedSave
Please note that shipping and installation is not included.
5d
Mbombela / Nelspruit1
R 7,047.20
SavedSave
Please note that shipping and installation is not included.
Firstly the Pedrollo PK80-3P peripheral high pressure non self
priming pump 0.75KW is suitable for use with clean water that does not
contain abrasive particles and liquids that are not chemically
aggressive towards the materials from which the pump is made.
Thanks to their reliability, the fact that they are easy to use and
are economical, they are ideal for domestic use and in particular for
distributing water in combination with small pressure sets and for the
irrigation of gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit:
Temperature of the liquid from -10 °C to +60 °C Ambient temperature up to +40 °C (+50 °C for PK 60)Manometric suction lift up to 8 mMax. working pressure: – 7 BAR
Performance Range:
Flow rate up to 50 l/min
Head up to 66m In/ outlet: 1″
2d
Mbombela / Nelspruit1
R 7,519.05
SavedSave
Please note that shipping and installation is not included.
Firstly the Pedrollo PKM90 peripheral high pressure non self priming
pump 0.75KW is Suitable for use with clean water that does not contain
abrasive particles and liquids that are not chemically aggressive
towards the materials from which the pump is made.
Thanks to their reliability, the fact that they are easy to use and
are economical, they are ideal for domestic use and in particular for
distributing water in combination with small pressure sets and for the
irrigation of gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit:
Temperature of the liquid from -10 °C to +60 °C Ambient temperature up to +40 °C (+50 °C for PK 60)Manometric suction lift up to 8 mMax. working pressure: – 10 BAR
Performance Range:
Flow rate up to 40 l/min
Head up to 82m In/ outlet: 3/4″
2d
Mbombela / Nelspruit1
R 6,704.50
SavedSave
Please note that shipping and installation is not included.First thing to remember the Pedrollo centrifugal CP158 pump 0.75KW –
three phase is suitable for use with clean water and liquids that are
not chemically aggressive towards the materials from which the pump is
made.
As a result of their reliability and the fact that they are easy to
use, these pumps are widely used in domestic and civil applications such
as the distribution of water in combination with small and medium sized
pressure sets, for transferring liquids and for the irrigation of
gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit:
Firstly temperature of the liquid from -10 °C to +90 °C Ambient Temperature to +40 °C Manometric suction lift up to 7 mMax. working pressure: 6 bar for CP 100m
Performance Range:
Flow rate up to 160 l/min (9,6 m³/h) Head up to 56 m
2d
Mbombela / Nelspruit1
R 6,704.50
SavedSave
Please note that shipping and installation is not included.First thing to remember is the Pedrollo centrifugal CP150 pump 0.75kW
– three phase is suitable for use with clean water and liquids that are
not chemically aggressive towards the materials from which the pump is
made.
As a result of their reliability and the fact that they are easy to
use, these pumps are widely used in domestic and civil applications such
as the distribution of water in combination with small and medium sized
pressure sets, for transferring liquids and for the irrigation of
gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit:
Firstly temperature of the liquid from -10 °C to +90 °C Ambient Temperature to +40 °C Manometric suction lift up to 7 mMax. working pressure: 6 bar for CP 100m
Performance Range:
Flow rate up to 160 l/min (9,6 m³/h) Head up to 56 m
2d
Mbombela / Nelspruit1
R 4,642.55
SavedSave
Please note that shipping and installation is not included.First thing to remember is the Pedrollo centrifugal CPM158 pump 0.75KW
– single phase is suitable for use with clean water and liquids that
are not chemically aggressive towards the materials from which the pump
is made.
As a result of their reliability and the fact that they are easy to
use, these pumps are widely used in domestic and civil applications such
as the distribution of water in combination with small and medium sized
pressure sets, for transferring liquids and for the irrigation of
gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit:
Firstly temperature of the liquid from -10 °C to +90 °C Ambient Temperature to +40 °C Manometric suction lift up to 7 mMax. working pressure: 6 bar for CP 100m
Performance Range:
Flow rate up to 160 l/min (9,6 m³/h) Head up to 56 m
2d
Mbombela / Nelspruit1
R 6,060
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 0.75kW – three phase
centrifugal pump is suitable for domestic, civil, industrial and
agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 0.75kW – three phase
Maximum operating pressure: 6 bar (600 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230 V -400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1″
Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
1d
Mbombela / Nelspruit5
R 2,650
SavedSave
PEDROLLO JSWm2CX 1HP 0.75kw
wellpoint water Pump with DSK Pump controller for sale
Excellent as Brand new condition... Not used
Somerset West area
R2650
Interested phone Deon*0833095897*
12d
Strand1
R 8,191.45
SavedSave
Please note that shipping and installation is not included.
Firstly the Pedrollo PK90-3P peripheral high pressure non self
priming pump 0.75KW. Is suitable for use with clean water that does not
contain abrasive particles and liquids that are not chemically
aggressive towards the materials from which the pump is made.
Thanks to their reliability, the fact that they are easy to use and
are economical, they are ideal for domestic use and in particular for
distributing water in combination with small pressure sets and for the
irrigation of gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit:
Temperature of the liquid from -10 °C to +60 °C Ambient temperature up to +40 °C (+50 °C for PK 60)Manometric suction lift up to 8 mMax. working pressure: – 10 BAR
Performance Range: Flow rate up to 40 l/min
Head up to 38 m
2d
Mbombela / Nelspruit1
R 7,576
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 0.75kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 0.75kW – three phase
Maximum operating pressure: 6 bar (600 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:Three-phase 230 V -400 V
CONSTRUCTION FEATURES OF THE PUMPInlet: 1″Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
1d
Mbombela / Nelspruit1
R 2,663.58
SavedSave
Please note that shipping and installation is not included.Seakoo centrifugal pump CPM158 pump 0.75kw – single phase
Motor of Centrifugal Pump
2 pole induction motor.Single phase 220V, 50/60Hz; Three phase 380V, 50/60Hz.Insulation: Class B/Class F.Protection:IP44.With capacitor and thermal overload protector.
Centrifugal Pump Material
Pump body: Cast Iron.Motor support: Aluminum.Impeller: Brass.Motor shaft: Stainless Steel or CS45#.Mechanical seal: Ceramic-Graphite.100% copper winding.
Centrifugal Pump Operating Conditions
Suction lift up to 7m.Liquid temperature up to +40℃.Ambient temperature up to +40℃.Max. working pressure: 6 bar.
6d
Mbombela / Nelspruit1
R 4,122
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 0.75kW – single phase
centrifugal pump is suitable for domestic, civil, industrial and
agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 0.75kW – single phase
Maximum operating pressure: 6 bar (600 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Single-phase 220-240 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1″
Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
1d
Mbombela / Nelspruit1
R 5,091
SavedSave
Please note that shipping and installation is not included.DAB Centrifugal single impeller K pump 0.75kW – single phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB Centrifugal single impeller K pump 0.75kW – single phase
Maximum operating pressure: 6 bar (600 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Single-phase 220-240 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″
Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
1d
Mbombela / Nelspruit1
R 6,060
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 0.75kW – single phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.DAB centrifugal double impeller K pump 0.75kW – single phaseMaximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 220 V -240 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1″
Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
2d
Mbombela / Nelspruit1
R 11,033
SavedSave
Please note that shipping and installation is not included.Single-impeller DAB centrifugal stainless steel KI pump 0.75kW –
single phase end suction centrifugal pump, suitable for thermal waters,
industrial washing, civil and industrial pressure boosting (cold, hot,
refrigerated liquid).
Technical Data of the pump
Operating range: Flow rate up to 11 m³/h, with head up to 40 metersPumped liquid: Clean, free of solids and abrasives,
non-viscous, non aggressive, non-crystallised and chemically neutral,
with properties similar to water.Liquid temperature range: From -10°C to +90°CMaximum ambient temperature: +40°CMaximum operating pressure: 8 barProtection class: IP 55Insulation class: FStandard Voltage: Single-phase 220-230 V 50 HzInstallation: Horizontal or vertical position, provided that the motor is always above the pump.Special executions on requests:V version: Alox Ceramic/Carbon/FKM: for oily liquids (up to 110°C) and propylene glycolVS version: SiC/SiC/FKM: for oily liquids (up to 110°C) and fluids with abrasive particlesE version: SiC/Carbon/EPDM: high temperature water up to 120 °C and ethylene glycolInlet: 1.1/4″Outlet: 1″
2d
Mbombela / Nelspruit1
R 5,011
SavedSave
Please note that shipping and installation is not included.DAB Borehole Combo 4 – 0.75KW OC S4-2/14 is engineered for efficient
groundwater extraction and water supply, offering submersible electric
pumps designed for use in 4-inch wells or larger. This versatile pump is
suitable for domestic water supply, sprinkler systems, irrigation, and
various industrial applications.
Key Features:
Cost-Effective Construction: High efficiency and premium affordability.Abrasion Resistance: Floating impellers ensure resistance to abrasion for a longer life.Stainless Steel Construction: Precision-cast stainless steel
delivery port and suction support guarantee corrosion resistance and
durability.Hexagonal Shaft Design: Ensures effective impeller driving and optimal pump performance.Non-Return Valve: Prevents back flow and protects against water hammer, safeguarding the pump.
3-in-1 Borehole Combo:
Pump and Motor: Complete submersible pump solution with high-performance motor.Control Box: Provides easy operation and reliable protection for long-term use.Convenience: All-in-one package with everything needed for installation and maintenance.
Applications:
Water Supply Systems: Ideal for domestic, commercial, and agricultural water systems, including irrigation.Irrigation Systems: Suitable for sprinkler and drip irrigation setups.Water Lifting: Designed for groundwater extraction and pressure boosting.
2d
Mbombela / Nelspruit1
R 6,425
SavedSave
Please note that shipping and installation is not included.DAB Centrifugal single impeller K pump 0.75kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB Centrifugal single impeller K pump 0.75kW – three phase
Maximum operating pressure: 6 bar (600 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V / 50 Hz up to 4 kW included – 400 V ∆ 50 Hz from 5,5 kW
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″
Outlet: 1.1/2″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
1d
Mbombela / Nelspruit1
R 8,217
SavedSave
Please note that shipping and installation is not included.Important to realize DAB Waterpack 5 – 0.75kW (OC) S4-3/13 are
complete borehole pump systems designed for extracting groundwater for
domestic, commercial, or irrigation purposes. All things considered are
versatile and efficient, capable of delivering water from 4-inch wells
or larger. These systems are considered “plug and play” because they
include all necessary components besides the HDPE pipe.
In a word what is in the box?
Cable: 1.5mm 4 core submersible insulated cable. SABS approved.Nylon rope: 6mm nylon safety rope.Control Box: Pump protection and control for direct start up. Thermal protection with external manual reset.Cable joint: MX1 epoxy cable joint kit.Base plate: 40mm base-plate with integrated cable gland.Male adapters: Mechanical compression fittings are designed to withstand working pressures of up to 16 bar. Wet end: Base and upper support in techno polymer with build in non-return valve.Motor: Tesla 4OL submersible motor made in AISI 304
stainless steel for parts in contact with water. Complete with
removable lead out cable.
2d
Mbombela / NelspruitSave this search and get notified
when new items are posted!
