Please note that our Terms & Conditions and Privacy Notice are applicable.
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Results for vertical water tanks in "vertical water tanks" in South Africa in South Africa
1
R 229.99
SavedSave
Please note that shipping and installation is not included.Firstly the Radar ST-70AB float switches operate with all kinds of
water tanks and pumps for liquid level control. It can be used for
either water tank filling or emptying.
Also levels can be achieved by positioning the 2 weights to give a differential of 50mm to 1000mm.
Thereafter switches electrical connections allow direct connection to
single phase equipment. In other words the float can be used with a
control panel or starter box on low voltage.
Specifications
Power supply : 110v/240v, 50/60HzConnection: 1″ GRating: 240v – 7.5A, 110v – 15AConnection: 1″ & 3/4″ BSPVertical installationControl range 0.2 – 5.0 metersMaximum temperature: 60°cSupplied with mounting bracket
Advantages of the Radar ST-70AB
Unique patent device of vent slot, prevents vapor condensing inside switch body in humid environments.The switch body is in a good sealed condition,to protect from dust and moisture.The solid sinkers maintain a steady equilbrum to provide precise controlMulti-purpose design for pumping or drainage either, use terminal A for pumping ,or terminal B for drainage.
5d
Mbombela / Nelspruit
1
R 12,223.44
SavedSave
Please note that shipping and installation is not included.
Seakoo Cube SK1000 VSD Pump 1.0 kW. Variable speed drive, full LED
touch screen, energy saving, very silent, simple and easy to install.
Energy saving of the VSD permanent magnet motor. Consume +- 600-1200W
(pending on flow).
Solar system friendly – pump have “soft start” and do not have high
start amperage (power) required from regular booster pumps. Can be
installed vertical or horizontal. Important to realize the pump can
supply water for up to 5 irrigation sprinklers (pending on nozzle and
pipe size). Pump suitable for medium to large homes. Pump need to be
installed under cover or roof in area that cannot flood.
Power: 1kW.
Max. Flow: 7200 l/h.
Max. Head: 50m.
Max. Suction: 6m.
Optimal energy use
This is different from general pumps that work at a constant speed. A
variable pump adjusts its speed according to water demand. For example,
when water demand decreases, the VFD will reduce the motor speed. which
will cut off the required power. This flexibility in speed control
helps prevent unnecessary energy consumption. For homes that do not
require constant high water pressure. The pump uses least energy during
periods of low water demand, which saves a lot of wear.
Longer Life Span
Seakoo Cube SK1000 VSD Pump 1.0 kW also reduce mechanical wear. A
traditional pump that is turned on and off many times reduces its
lifespan. In contrast, a VFD can maintain a consistent and reasonable
speed, thus preventing sudden starts and stops. This reduces stress on
pump components. This results in lower maintenance costs and longer
equipment life. Examples of use within the country in residence Variable
frequency pumps work efficiently in applications such as garden
irrigation, hot water circulation and pond water systems.
6d
Mbombela / Nelspruit
1
R 49,091
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 9.2kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller. As can been seen on data sheet
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 9.2kW – three phase
Maximum operating pressure: 12 bar (1200 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2″
Outlet: 1.1/4″
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
1d
Mbombela / Nelspruit
1
R 46,790
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 9.2 kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 9.2 kW – three phase
Maximum operating pressure: 10 bar (1000 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2.1/2″
Outlet: 2″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
21h
Mbombela / Nelspruit
1
R 47,880
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 11 kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 11 kW – three phase
Maximum operating pressure: 8 bar (800 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2.1/2″
Outlet: 2″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
21h
Mbombela / Nelspruit
1
R 9,393
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 1.1kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller. As can been seen on data sheet
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 1.1kW – three phase
Maximum operating pressure: 6 bar (600 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″
Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
1d
Mbombela / Nelspruit
1
R 5,071.50
SavedSave
The Aquasystem Horizontal
Pressure Tanks 60l Horizontal. Is an element used in hydraulic
applications for sanitary water circuits, such as pressure groups in
combination with pumps or devices such as anti-water hammer.
The main purpose of the pressure tank is to give water at a steady
pressure. In order to limit the pump hourly starts, safeguarding its
working and electricity consumption. This is possible thanks to pre
charged air pressure stored between the membrane and the internal metal
surface of the tank.
The shape of pressure tank can be vertical or horizontal.
Pressure tank can have a max working pressure that changes according
to the needs of the system; it can be also available in galvanized or
AISI 304 stainless steel for high quality performance.
Specifications:
External finish color -Blue
Rubber membrane – EPDM
Maximum working pressure – 10 bar
Standard precharge pressure – 1.5 bar
Connection – 1″
19d
Mbombela / Nelspruit
1
R 46,547
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 9.2kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 9.2kW – three phase
Maximum operating pressure: 8 bar (800 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2.1/2″
Outlet: 2″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
21h
Mbombela / Nelspruit
1
R 7,576
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 0.75kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 0.75kW – three phase
Maximum operating pressure: 6 bar (600 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:Three-phase 230 V -400 V
CONSTRUCTION FEATURES OF THE PUMPInlet: 1″Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
1d
Mbombela / Nelspruit
1
R 36,363
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 5.5kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 5.5kW – three phase
Maximum operating pressure: 8 bar (800 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2.1/2″
Outlet: 2″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
21h
Mbombela / Nelspruit
1
R 4,122
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 0.75kW – single phase
centrifugal pump is suitable for domestic, civil, industrial and
agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 0.75kW – single phase
Maximum operating pressure: 6 bar (600 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Single-phase 220-240 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1″
Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
1d
Mbombela / Nelspruit
1
R 38,182
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 5.5kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 5.5kW – three phase
Maximum operating pressure: 12 bar (1200 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2″
Outlet: 1.1/4″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
1d
Mbombela / Nelspruit
1
R 20,000
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 4kW – three phase is suitable
for domestic, civil, industrial and agricultural systems, and for
decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller. As can been seen on data sheet
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 4kW – three phase
Maximum operating pressure: 12 bar (1200 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″
Outlet: 1″
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
1d
Mbombela / Nelspruit
1
R 16,545
SavedSave
Please note that shipping and installation is not included.DAB centrifugal double impeller K pump 2.2kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller. As can been seen on data sheet
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal double impeller K pump 2.2kW – three phase
Maximum operating pressure: 10 bar (1000 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″
Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
1d
Mbombela / Nelspruit
1
R 9,273
SavedSave
Please note that shipping and installation is not included.DAB Centrifugal double impeller K pump 1.1kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller. As can been seen on data sheet
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB Centrifugal double impeller K pump 1.1kW – three phase
Maximum operating pressure: 8 bar (800 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMPInlet: 1.1/4″Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
1d
Mbombela / Nelspruit
1
R 6,425
SavedSave
Please note that shipping and installation is not included.DAB Centrifugal single impeller K pump 0.75kW – three phase is
suitable for domestic, civil, industrial and agricultural systems, and
for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.
Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.
Rotor running on ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB Centrifugal single impeller K pump 0.75kW – three phase
Maximum operating pressure: 6 bar (600 kPa)
Maximum ambient temperature: +40°C
Liquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous,
non-aggressive, non-crystallized and chemically neutral, with properties
similar to water.
Standard voltage:
Three-phase 230-400 V / 50 Hz up to 4 kW included – 400 V ∆ 50 Hz from 5,5 kW
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″
Outlet: 1.1/2″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.
Carbon/ceramic mechanical seal.
21h
Mbombela / Nelspruit
1
R 9,885
SavedSave
Please note that shipping and installation is not included.DAB Active Driver Plus 1.0kW – M/T are inverters used for the control
of hydraulic pumps. Their obvious fields of application are domestic,
industrial, and agricultural constant pressure pumping systems.
The OLED display offers an extremely simple and intuitive graphic
interface. Displaying or changing any parameters is extremely simple,
which in turn also simplifies maintenance.
Installation is also very easy: the installation wizard asks the user for the parameters required for the configuration.
DAB Active Driver Plus 1.0kW – M/T inverters provide a reduction of
electric consumption, thanks to the inverter technology, whilst at the
same time ensuring maximum comfort thanks to the constant pressure.
They are extremely versatile, as they do not require external sensors
and non-return valves. There is in-fact a built-in pressure sensor, a
flow switch, and a non-return valve.
The advantages of Active Driver Plus are:
– comfort, thanks to the constant pressure,
– energy savings, thanks to the inverter technology.
– less noise,
– compact shape,
– all the built-in protections: dry run, overload, abnormal voltage, over temperature, freezing.
Line voltage: 115V and 230V single-phase.
Electric pump voltage: 115V and 230V single-phase.
Power supply frequency: 50 Hz – 60 Hz.
Installation: vertical and horizontal (M/M and M/T only)
Maximum liquid temperature: 50°C.
Max operating temperature: 60°C.
Max flow rate: 15m3/h.
Pressure regulation range: from 1 to 5 bar.
Suction diameter (DNA): 1 1/4” male.
Delivery diameter (DNM): 1 1/2” female.
Protection level: IP55.
Communication interface for sets: YES, an Active Driver Plus for each pump
Non-return valve not required
Remote control available thanks to the D.Connect (D.Connect Box sold separately).What is D.Connect? The innovative online service by DAB, the Internet of Pumps!
5d
Mbombela / Nelspruit
1
R 10,146
SavedSave
Please note that shipping and installation is not included.DAB Active Driver Plus 1.1kW – single phase are inverters used for
the control of hydraulic pumps. Their obvious fields of application are
domestic, industrial, and agricultural constant pressure pumping
systems.
The OLED display offers an extremely simple and intuitive graphic
interface. Displaying or changing any parameters is extremely simple,
which in turn also simplifies maintenance.
Installation is also very easy: the installation wizard asks the user for the parameters required for the configuration.
DAB Active Driver Plus 1.1kW – single phase inverters provide a
reduction of electric consumption, thanks to the inverter technology,
whilst at the same time ensuring maximum comfort thanks to the constant
pressure.
They are extremely versatile, as they do not require external sensors
and non-return valves. There is in-fact a built-in pressure sensor, a
flow switch, and a non-return valve.
The advantages of Active Driver Plus are:
– comfort, thanks to the constant pressure,
– energy savings, thanks to the inverter technology.
– less noise,
– compact shape,
– all the built-in protections: dry run, overload, abnormal voltage, over temperature, freezing.
Line voltage: 115V and 230V single-phase.
Electric pump voltage: 115V and 230V single-phase.
Power supply frequency: 50 Hz – 60 Hz.
Installation: vertical and horizontal (M/M and M/T only)
Maximum liquid temperature: 50°C.
Max operating temperature: 60°C.
Max flow rate: 15m3/h.
Pressure regulation range: from 1 to 6 bar.
Suction diameter (DNA): 1 1/4” male.
Delivery diameter (DNM): 1 1/2” female.
Protection level: IP55.
Communication interface for sets: YES, an Active Driver Plus for each pump
Non-return valve not required
Remote control available thanks to the D.Connect (D.Connect Box sold separately).What is D.Connect? The innovative online service by DAB, the Internet of Pumps!
5d
Mbombela / Nelspruit
1
R 10,427
SavedSave
Please note that shipping and installation is not included.DAB Active Driver Plus 2.2kW – M/T are inverters used for the control
of hydraulic pumps. Their obvious fields of application are domestic,
industrial, and agricultural constant pressure pumping systems.
The OLED display offers an extremely simple and intuitive graphic
interface. Displaying or changing any parameters is extremely simple,
which in turn also simplifies maintenance.
Installation is also very easy: the installation wizard asks the user for the parameters required for the configuration.
DAB Active Driver Plus 2.2kW – M/T inverters provide a reduction of
electric consumption, thanks to the inverter technology, whilst at the
same time ensuring maximum comfort thanks to the constant pressure.
They are extremely versatile, as they do not require external sensors
and non-return valves. There is in-fact a built-in pressure sensor, a
flow switch, and a non-return valve.
The advantages of Active Driver Plus are:
– comfort, thanks to the constant pressure,
– energy savings, thanks to the inverter technology.
– less noise,
– compact shape,
– all the built-in protections: dry run, overload, abnormal voltage, over temperature, freezing.
Line voltage: 115V and 230V single-phase.
Electric pump voltage: 115V and 230V single-phase. 230V and 400V three-phase.
Power supply frequency: 50 Hz – 60 Hz.
Installation: vertical and horizontal (M/M and M/T only)
Maximum liquid temperature: 50°C.
Max operating temperature: 60°C.
Max flow rate: 15m3/h.
Pressure regulation range: from 1 to 13 bar.
Suction diameter (DNA): 1 1/4” male.
Delivery diameter (DNM): 1 1/2” female.
Protection level: IP55.
Communication interface for sets: YES, an Active Driver Plus for each pump
Non-return valve not required
Remote control available thanks to the D.Connect (D.Connect Box sold separately).What is D.Connect? The innovative online service by DAB, the Internet of Pumps!
5d
Mbombela / Nelspruit
12
R 40,500,000
SavedSave
Premium 1318m² Office Building for Sale – Wapadrand, Pretoria EastBACK UP POWER SUPPLY AND WATER TANK AVAILABLEThis premium-grade 1318 square meter office building is now available for sale in the well-established and sought-after area of Wapadrand, located in the east of Pretoria. Zoned for offices, medical and dental suites, as well as consulting rooms, this property offers a rare opportunity for professionals and investors seeking a versatile and high-quality business space.The building comprises a professional reception area, boardrooms, a fully equipped kitchen, and ablution facilities. A key feature is the dedicated training venue that accommodates 30 delegates and includes 30 desktop computers—ideal for workshops, training, or corporate seminars.Security is a top priority, with access-controlled entry and exit points, fingerprint access to offices, and CCTV camera surveillance throughout. The property also offers ample parking, including open bays, undercover parking, and secure basement spaces for both staff and visitors. The properrty has a rooftop entertainment area.Additional features include a top-quality generator to ensure continuous power supply, as well as a vertical water storage tank for water backup.Ideally positioned close to major routes such as Lynnwood Road, Solomon Mahlangu Drive, and the N4 highway, the property provides excellent accessibility and is conveniently located near shopping centres, medical facilities, restaurants, and other key amenities.This is a standout opportunity to own a secure, fully equipped office building in one of Pretoria East’s most connected and prestigious suburbs.Property Reference #: CL115972Agent Details:Jodine CoetzerOfficePlaceSouthdowns Office Park, Block DGround Floor, Suite 6 & 722 Karree StreetIreneCenturion
2mo
OfficePlace
Save this search and get notified
when new items are posted!