Please note that our Terms of Use and Privacy Notice are applicable.
Filter & refine
Clear All
Results for surface grinders in All Categories in South Africa
1
SavedSave
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Boilermaker with Fabrication Experience.
REQUIREMENTS:
Grade 12 / National Senior Certificate
Fitter and Turner Trade Test Certificate
Minimum of 2 years’ experience as a qualified Fitter and Turner in a manufacturing environment
Energetic, proactive and able to work under pressure
A valid driver’s license with own reliable transport
Skills and Knowledge Required
·Admin: Complete all Fabrication Request feedback paperwork. Complete MJR’s. Compile SOW and BOM for small FR. Complete all TSIS and H&S paperwork.
·Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
·Welding – Mig, Tig and Arc
·Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
·Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
·Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
·Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
·Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
. Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
·Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
·Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
8h
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za
and indicate your salary expec
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004764/MM&source=gumtree
8h
1
SavedSave
Fitter & Turner
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements:
• Grade 12 / National Senior Certificate.
• Section 13 Fitter and Turner Trade Test Certificate.
• 3 - 5 years post trade experience.
• Experience within a manufacturing environment (beneficial).
• Energetic, proactive and able to work under pressure.
• A valid driver’s license with own reliable transport.
Skills and Knowledge Required:
•Preventative Maintenance Routines.
•Welding (Mig Tig & Arc), Milling, and Turning.
•Planning - Check that all part complies with procurement register and data pack. (Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
•Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
•Drilling and/or slotting holes: Proper use of hand drill, Mag base drill, machining machine, etc.
•Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc. (Prep for next phase)
•Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack. (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
•Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
•Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
•Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
•Pneumatics and Hydraulics.
•Gearboxes.
•Water Systems and Cooling Towers.
•Basic Electrical Experience.
•Bearing and Shaft Changing.
•Fault Finding and Diagnosis.
•Lubrication.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
9h
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements:
• Grade 12 / National Senior Certificate.
• Qualified Boilermaker Trade Test Certificate.
• Minimum of 1 -2 years’ post trade experience.
• A valid driver’s license with own reliable transport.
Skills and Knowledge Required:
•Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
•Welding – Mig, Tig and Arc
•Drilling and/or slotting holes. Proper use of hand drill, Mag base drill, machining machine, etc.
•Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc. (Prep for next phase)
•Machining and Fitting - Planning: Check that all part complies with procurement register and data pack. (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
•Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
•Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
•Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
•Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
•Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc. installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
megan@personastaff.co.za
9h
1
SavedSave
Fitter and Turner.
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Skills and Knowledge Required
Preventative Maintenance Routines.
Welding (Mig Tig & Arc), Milling, and Turning.
Planning - Check that all part complies with procurement register and data pack.(Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
Drilling and/or slotting holes: Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Pneumatics and Hydraulics.
Gearboxes.
Water Systems and Cooling Towers.
Basic Electrical Experience.
Bearing and Shaft Changing.
Fault Finding and Diagnosis.
Lubrication.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Consultant Name: Megan Ockhuis
9h
1
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to megan@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Salary: R120 - 150 p/hConsultant Name: Megan Ockhuis
9h
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to natasha@personastaff.co.za
and indicate your salary exp
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004788/N&source=gumtree
9h
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post-trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Ensure that all parts comply with the procurement register and data pack (Report any deviations). Check that all tools and equipment are available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to liza-nelle@personastaff.co.za
and indicate your s
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004789/LN&source=gumtree
9h
1
SavedSave
Internationally established Manufacturing Company based in the Northern Suburbs is seeking to appoint a suitably qualified and experienced Fitter and Turner.
Minimum Requirements:
Grade 12 / National Senior Certificate
Section 13 Fitter and Turner Trade Test Certificate
3 - 5 years post trade experience.
Experience within a manufacturing environment (beneficial).
Energetic, proactive and able to work under pressure.
A valid driver’s license with own reliable transport.
Skills and Knowledge Required:
. Preventative Maintenance Routines.
. Welding (Mig Tig & Arc), Milling, and Turning.
. Planning - Check that all part complies with procurement register and data pack. .... (Report any deviations) Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
. Material Cutting - bandsaw, cut-off saw, cutting torch, grinder.
. Drilling and/or slotting holes: Proper use of hand drill, Mag base drill, machining machine, etc.
. Finishing/Grinding: Remove all shape edgers, burs, welding spatter, etc. (Prep for next phase)
. Machining and fitting related tasks - planning: Check that all part complies with procurement register and data pack. (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task.
. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
. Machining: Use appropriate machinery to execute tasks for e.g.: Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
. Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
. Pneumatics and Hydraulics.
. Gearboxes.
. Water Systems and Cooling Towers.
. Basic Electrical Experience.
. Bearing and Shaft Changing.
. Fault Finding and Diagnosis.
. Lubrication.
Please forward your CV to reception@personastaff.co.za and indicate your salary expectations.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
reception@personastaff.co.za
9h
1
SavedSave
Boilermaker (6-month Contract Position)
Our client, based in the Northern Suburbs, is an Internationally established Manufacturing company. They are seeking to appoint a qualified and experienced Boilermaker on a 6-month contract position.
Minimum Requirements
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Skills and Knowledge Required
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc installed. Test the safety of the operation/function. Identify and address snags.
Please forward your CV to craig@personastaff.co.za
and indicate your salary expec
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004794/CS&source=gumtree
9h
1
SavedSave
Our client, based in the Northern Suburbs in the manufacturing industry is seeking a qualified and experienced Boilermaker on a 6-month contract position.
Requirements:
Based in Cape Town
Grade 12 / National Senior Certificate
Qualified Boilermaker Trade Test Certificate
Minimum of 1 -2 years’ post trade experience.
A valid driver’s license with own reliable transport
Responsibilities:
Fabrication-Planning: Check that all parts comply with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Material cutting. Proper use of bandsaw, cut-off saw, cutting torch, grinder, etc.
Welding – Mig, Tig and Arc
Drilling and/or sloting holes. Proper use of hand drill, magbase drill, machining machine, etc.
Finishing/Grinding -Remove all shape edgers, burs, welding spatter, etc.(Prep for next phase)
Machining and Fitting - Planning: Check that all part comply with procurement register and data pack.(Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts require heat treatment or any process that can’t be done inhouse.
Machining: Use appropriate machinery to execute tasks for e.g. Proper use of lathe machine for turning, facing, grooving, parting, boring, tapping, etc. Proper use of milling machine for forming flat surfaces, cutting slots, drilling or reaming holes, gear cutting, etc. Proper use of surface grinding machine for surface finishing, remove material for small tolerances, etc. On completion of parts ensure that all shape edgers and burs are removed, and the part is treated for the next phase. (Lubricate and store in a dry area to avoid rust.)
Fitting: Appropriate fitting method must be used to perform tasks like: Fitment and alignment of drives, brakes, clutches, gears, sprockets, bearing, etc. Fitment of motors, pumps, gearboxes, etc. Fitment of Pneumatic and hydraulic components.
Installation- Planning: Check that all part complies with procurement register and data pack (Report any deviations). Check that all tools and equipment is available to execute task. Plan a working procedure for the task. Complete MJR’s for parts/items required to execute. Read and understand the layout, floor plans, routing and inspect site.
Installation- The installations of machinery and/or external components. The installations of water systems. The installation of pneumatic and hydraulic systems. The installation of platforms and strictures.
Testing and commissioning- Test the operation/functioning of the machine, component, system, structure, etc. installed. Test the safety of the operation/function. Identify and address snags.
To apply, please forward your CV to hannah@personastaff.co.za.
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hour
SECTOR: Engineering & Technical; Manufacturing
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004803/H&source=gumtree
9h
1
Contact f/price
SavedSave
We have a variety of Surface Grinders available, ranging from 350mm B/C to 1670mm B/C. Items Available: 1Stock ID: 56We stock a variety of brands.All machines are Refurbished ,Ex Stock, in Excellent condition and include a Warranty.Visit www.lsgmts.co.za for complete stock list.
1y
2
Contact f/price
SavedSave
Call 079 416 4632 or ww.machinetooldirectory.co.za
to view the range of New & Used Vertical Boring Mills available Ex
Stock
· Webster & Bennett 36”
· Schneiden 41”
· Webster & Bennett 43”
· Webster & Bennett 48”
· Berthiez 55”
· Webster & Bennett 60”
· Webster & Bennett 65”
· Webster & Bennett 72”
· ScheisS 98”
· Richards 120”
· Craven 144”
Other Engineering Machinery also
available on www.machinetooldirectory.co.za
Centre Lathes *
Compressors * CO2 Welding Machines * Cut Off Saws * De-Coilers * Decoilers
& Levellers * Eccentric Presses * External Grinders * Gap Lathes * Steel
Lathes * Metal Lathes * Gear Cutters * Horisontal Borers * Horizontal Band Saws
* Horizontal Boring Mills * Hydraulic Presses * Internal Grinders * Milling
Machines * Manipulators * Pedestal Drills * Pipe Threading Machines * Power
Saws * Punching Machines * Radial Arm Drills * Shapers * Slitting Machines *
Slotters * Slotting Machine * Spark Eroders * Spot Welders * Steel Lathes *
Surface Grinders * Thread Rolling Machines * Turret Mills * Vertical Boring
Mills * Vertical Band Saws * Vertical Borers * Welding Machines * Welding
Rotators * and many more engineering machine tools & accessories
available
and many more engineering machine tools
& accessories available ex stock
**A wide selection of 1000mm 1250mm
1300mm 1400mm 1500mm 2000mm 2500mm 3000mm 3500mm 3800mm 4000mm 4500mm 5000mm
6000mm 7000mm & 8000mm swings & length Engineering machines available
Ex Stock for your boring
4d
12
Contact f/price
SavedSave
Call 079 416 4632 or ww.machinetooldirectory.co.za
to view the range of New & Used Lathes available Ex Stock
· WMW 10 000mm BC
· Dainchi 8 000mm BC
· WMW 8 000mm BC
· WMW 6 000mm BC
· DSG 6 000mm BC
· Skoda 6 000mm BC
· Stanko 5 000mm BC
· Poreba 4 300mm BC
· WMW 4 200mm BC
· VDF 4 000mm BC
· Daliian 3 000mm BC
· TOS 3 000mm BC
· Mazak Rex 3 000mm BC
· Dalian 3 000mm BC
· Spartan 3 000mm BC
· Martin 3 000mm BC
· Giovanni 2 500mm BC
· Graziano 2 500mm BC
· Dalian 2 000mm BC
· TOS 2 000mm BC
· Ursus 2 000mm BC
· Silven 2 000mm BC
· Ursus 1 500mm BC
· Graziano 1 400mm BC
· Colchester 1 300mm BC
· SMTLC 1 000mm BC
· Takisawa 1 000mm BC
Other Engineering Machinery also
available on www.machinetooldirectory.co.za
·
Centre Lathes * Compressors * CO2 Welding Machines
* Cut Off Saws * De-Coilers * Decoilers & Levellers * Eccentric Presses *
External Grinders * Gap Lathes * Steel Lathes * Metal Lathes * Gear Cutters *
Horisontal Borers * Horizontal Band Saws * Horizontal Boring Mills * Hydraulic
Presses * Internal Grinders * Milling Machines * Manipulators * Pedestal Drills
* Pipe Threading Machines * Power Saws * Punching Machines * Radial Arm Drills
* Shapers * Slitting Machines * Slotters * Slotting Machine * Spark Eroders *
Spot Welders * Steel Lathes * Surface Grinders * Thread Rolling Machines *
Turret Mills * Vertical Boring Mills * Vertical Band Saws * Vertical Borers *
Welding Machines * Welding Rotators *
and many more
engineering machine tools & accessories available ex stock for turning
·
**A wide selection of 1000mm 1250mm 1300mm 1400mm 1500mm 2 000mm 2500mm
3 000mm 3 500mm 3
800mm 4 000mm 4 500mm 5 000mm 6 000mm 7 000mm & 8 000mm 1250mm 1300mm
1400mm 1500mm 2000mm 2500mm 3000mm 3500mm 3800mm 4000mm 4500mm 5000mm 6000mm
7000mm & 8000mm length Engineering machines available Ex Stock**
·
**A
wide selection of 300mm 400mm 500mm 560mm 600mm 660mm 700mm 800mm 1 000mm
1250mm 1500mm swings over the lathe bed available Ex Stock **
·
** A wide selection of 40mm 50mm 60mm 75mm 80mm 90mm 105mm 120mm 125mm
130mm 145mm spindle bores available Ex Stock **
4d
12
Contact f/price
SavedSave
Call 079 416 4632 or www.machinetooldirectory.co.za
to view the range of New & Used Eccentric Presses available Ex
Stock
· Muller 300 Ton
· TOS 250 Ton
· Cugini 200 Ton
· Schmeir 200 Ton
· Schmeir 180 Ton
· TOS 160 Ton
· Stanko 160 Ton
· Schmeir 150 Ton
· Bliss 125 Ton
· Caxton 120 Ton
· Elga 120 Ton
· Raskin 200 Ton
· Chin Fong 110Ton
· Stanko 100 Ton
· TOS 100 Ton
· Caxton 90 Ton
· EBS 80 Ton
· HME 80 Ton
· HME 70 Ton
· EBS 65 Ton
· WMW 63 Ton
· Caxton 60 Ton
· Rijva 60 Ton
· EBS 60 Ton
· Estarta 50 Ton
· Raster 50 Ton
· Caxton 45 Ton
· WMW 40 Ton
· HME 40 Ton
· Raskin 35 Ton
· Schmeir 35 Ton
· Caxton 30 Ton
· Raskin 30 Ton
· TOS 30 Ton
· HME 25 Ton
· Bliss 25 Ton
· EBU 25 Ton
· HME 20 Ton
· Caxton 15Ton
Other Engineering Machinery also
available on www.machinetooldirectory.co.za
·
Centre Lathes * Compressors * CO2 Welding Machines * Cut Off Saws *
De-Coilers * Decoilers & Levellers * Eccentric Press * External Grinders *
Gap Lathes * Steel Lathes * Metal Lathes * Gear Cutters * Horisontal Borers *
Horizontal Band Saws * Horizontal Boring Mills * Hydraulic Presses * Internal
Grinders * Milling Machines * Manipulators * Pedestal Drills * Pipe Threading
Machines * Power Saws * Punching Machines * Radial Arm Drills * Shapers *
Slitting Machines * Slotters * Slotting Machine * Spark Eroders * Spot Welders
* Steel Lathes * Surface Grinders * Thread Rolling Machines * Turret Mills *
Vertical Boring Mills * Vertical Band Saws * Vertical Borers * Welding Machines
* Welding Rotators * and many more engineering machine tools & accessories available
and many more engineering machine tools
& accessories available ex stock
4d
11
Contact f/price
SavedSave
Call 079 416 4632 or www.machinetooldirectory.co.za
to view the range of New & Used Radial Arm Drills available Ex
Stock ***
· MAS 32mm with 950mm Arm
· WMW 40mm with 1250mm Arm
· Foradia 50mm with 1200mm Arm
· ZJ 50mm with 1600mm Arm
· MAS 50mm with 1700mm Arm
· Okuma 50mm 1800mm Arm
· K & W 55mm with 1800mm Arm
· Novara 63mm with 1700mm Arm
· Asquith 65mm with 1800mm Arm
· EMA 70mm with 1700mm Arm
· Csepel 75mm with 2000mm Arm
· K & W 80mm with1800mm Arm
· Asquith 100mm with 200mm Arm
Other Engineering Machinery also
available
·
Centre Lathes * Compressors * CO2 Welding Machines * Cut Off Saws *
De-Coilers * Decoilers & Levellers * Eccentric Press * External Grinders *
Gap Lathes * Steel Lathes * Metal Lathes * Gear Cutters * Horisontal Borers *
Horizontal Band Saws * Horizontal Boring Mills * Hydraulic Presses * Internal
Grinders * Milling Machines * Manipulators * Pedestal Drills * Pipe Threading
Machines * Power Saws * Punching Machines * Radial Arm Drills * Shapers *
Slitting Machines * Slotters * Slotting Machine * Spark Eroders * Spot Welders
* Steel Lathes * Surface Grinders * Thread Rolling Machines * Turret Mills *
Vertical Boring Mills * Vertical Band Saws * Vertical Borers * Welding Machines
* Welding Rotators * and many more engineering machine tools & accessories available
and many more engineering machine tools
& accessories available ex stock
4d
SavedSave
Good day
We have a Favretto TA 60 Surface grinder in excellent working condition. Electromagnet 600x 380
Auto down feed. Wheel size 350x50x127.
If interested contact Aaron 067 103 7668 for viewing and information.
8d
4
R 5,000
SavedSave
Hilti AG 4S-A22 Variable Speed 125mm Cordless 22V Angle Grinder Set22V cordless angle grinder with electronic speed control and brushless motor for everyday cutting and grinding with discs up to 5" or 125 mmFeatures:Brushless motor – lasts up to three times longer (no commutator to damage and no carbon brushes to change)Very slim design with lock-on switch – this cordless angle grinder fits firmly in your grip, for more comfortable handling and precise control even in hard-to-reach placesPrecise speed control from 3400-7600 rpm – you can use higher speeds to cut and grind very quickly, while the lower speeds help you to achieve a perfect surface finishActive Torque Control (ATC) stops the tool body from spinning uncontrolledly if the disc jams – helping to reduce a common safety hazardCordless tool platform – the same battery for all your 22V Hilti toolsApplications:Cutting and grinding steel, stainless steel and other metalsFinishing metalDeburring and polishing metalCutting and grinding mineral materialsCutting tiles using continuous-rim diamond discsTechnical Data:Rated voltage: 21,6 V Disc diameter: 125 mm Max. cutting depth: 34 mm No load RPM: gear 1: 3400 rpm; gear 2: 3800 rpm; gear 3: 4400 rpm; gear 4: 5200 rpm; gear 5: 6300 rpm; gear 6: 7600 rpm Trigger type: Lockable on / off Dimensions (LxWxH): 306 x 85 x 138 mm Weight: 3.11 kgIn Excellent Working Condition. Includes Grinder, 1 x 5.2Ah Battery & Charger. **(R5000 for ONLY Grinder & Battery)Only R6500.00 cash/eft - Replacement Cost Over R14 000.00 Call or Whatsapp/Signal Messenger Kevin on 074 963 7344 (8am-8pm 7 Days) Unfortunately SMS's & Emails are Blocked!*Conveniently Situated in Parow, just off Voortrekker Road*Confirm Availability When Ready To View, Many Other Tools Available "VIEW PROFILE".Viewing Strictly By Appointment Only.**WARNING: I'm Not Affiliated To Anyone Else Selling Tools On Gumtree Or Anywhere**
9d
3
R 1,207
NEGOTIABLE
SavedSave
DAMAGED PACKAGING - Robust, universal and economical: powerful angle grinder for any application- Powerful motor with good overload capacity- Twist-proof guardCharacteristics:- Grinding wheel Ø: 115 mm- Rated input power: 850 W- Output power: 520 W- No-load speed: 11500 rpm- Revolutions at rated load: 7000 rpm- Torque: 2 Nm- Spindle thread: M 14- Weight (without power cable): 1.8 kg- Cable length: 2.5 mVibration:- Surface grinding: 7.5 m/s²- Uncertainty of measurement K: 1.5 m/s²- Grinding with sandpaper: 2.2 m/s²- Uncertainty of measurement K: 1.5 m/s²Noise emission:- Sound pressure level: 88 dB(A)- Sound power level (LwA): 99 dB(A)- Uncertainty of measurement K: 3 dB(A)Grinding disc:- 5 pieces- 115 mmWhat's in the box1 x Metabo - W 850-115 Angle Grinder (603607010)1 x Guard1 x Inner support flange1 x Nut with two holes1 x Side handle1 x Flat-pin spanners5 x Cutting Discs(115mm)
17d
5
R 55,900
SavedSave
SG4 simplex surface grinder. In working condition
1mo
Save this search and get notified
when new items are posted!
