Please note that our Terms & Conditions and Privacy Notice are applicable.
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Results for submersible pumps in "submersible pumps" in South Africa in South Africa
1
R 11,000
SavedSave
1000l Diesel Tank, includes:1000l Bunded tankSubmersible pump (brand new, never been used) Manual pump +-400l diesel
2d
Port Elizabeth
1
R 6,463
SavedSave
Please note that shipping and installation is not included.Firstly the feka bvp submersible pump 0.75kW application. Following
the powerful submersible pumps for draining and emptying applications.
Suitable for pumping dirty water with solid particle size up to 38 mm.
Automatic version with float switch for automatic pump start and stop
also available.
Construction features of the pump
Hydro resistant techno polymer pump body, wear-free impellers, cover,
and suction grid. Corrosion and oxidation resistant materials.
Construction features of the motor
Submersible type continuous duty asynchronous motor. Thermal overheating protection. Wear-resistant motor shaft.
Technical Data of the Feka bvp submersible pump 0.75kW
Operating range: From 1 to 18 m3/h with head up to 12 meters.
Liquid temperature range: From 0 °C to +35 °C.
Pumped liquid: Dirty water with maximum solid particle size 38 mm.
Max. immersion depth: 7 meters.
HP: 1
Important to realize to ensure the proper operation of the pump, it is important to comply with the following recommendations:
The pump must never be allowed to run dry.Never leave the pump in operation when the delivery pipe is clogged.The pump must be positioned so that the holes on the suction side cannot be partially or totally clogged by dirt.The pump must only be used when it is immersed in water. If the
water runs out, the pump must be stopped immediately by removing the
plug from the power supply.Pay careful attention when the pump is operated in manual mode.The pump must be placed in a stable position inside a collection pit or in the lowest part of the place where it is installed.
1d
Mbombela / Nelspruit
9
R 399
SavedSave
The SOBO D Series WP-500D is a quiet and durable submersible water pump, featuring a long-lasting waterproof ceramic shaft and suction cups for secure placement.
Suitable for fountains, ponds, and both fresh and seawater aquariums.
3d
VERIFIED
1
R 3,378
SavedSave
Please note that shipping and installation is not included.Firstly Verty nova 0.2kW 200 M is a vertical delivery submersible
pump suitable for domestic applications like drainage or lifting water
form thanks or river. In the second place it may be used in automatic or
manual mode and it’s very easy to handle.
This time vertical delivery draining submersible pump is suitable for
domestic automatically operated fixed applications, for draining
basements and garages that are subject to flooding. Thanks to its
compact and easy to handle shape, and the built-in float, it is suitable
for particularly small draining wells (minimum 20×20 cm). It may also
be used as a portable pump for emergencies such as lifting water from
tanks or rivers, emptying swimming pools, fountains, excavations and
underpasses.
Hydro resistant techno polymer pump body, cover, and suction grid.
Stainless steel motor, roto shaft, and bolts and screws. Threefold seal
with interposed rings with oil pre chamber.
Submersible type continuous duty asynchronous motor. Starter enclosed
in airtight stainless steel casing, with an outer cover that protects
the wiring and the capacitor. Rotor running on permanently lubricated
ball bearings, oversized to ensure low noise and durability. Built-in
thermal amperometric protection and permanently connected capacitor.
Verty nova 0.2kW 200 M Clean water draining submersible pumps for domestic use with built in float.
Operating range: from 1 to 10m3/h with head up to 9 meters.
Pumped liquid: dirty water without fibers.
Liquid temperature range: from 0 °C to +35 °C for domestic use.
Outlet: vertical 1” ¼ F plus hose fitting.
Pump priming limit: 10-15 mm in manual operation.
Max. immersion depth: 7 meters.Power input: 1 x 230 V
1d
Mbombela / Nelspruit
1
R 4,630
SavedSave
Please note that shipping and installation is not included.First thing to remember the DAB Novapond submersible pump 0.2kW is
specifically designed for the re circulation of water in ponds. To
create waterfalls and water features. They are designed to pump clean
water containing solid particles with a maximum diameter of 10 mm.
Suitable for continuous operation. Designed for horizontal or vertical
installation. Environmentally safe. Materials resistant to corrosion and oxidation. Motor with thermal
overload protection. Adjustable suction filter to enable transit of
solid particles with a diameter from 5 mm to 10 mm. Supplied with power
cable and plug, and self-sealing coupling.
Construction features of the pump
Hydro resistant techno polymer pump body, wear-free impellers, cover,
and suction grid. Corrosion and oxidation resistant materials.
Construction features of the motor
Submersible type continuous duty asynchronous motor. Thermal overheating protection. Wear-resistant motor shaft.
Technical Data of the DAB Novapond submersible pump 0.2kW
Operating range: From 1 to 14 m³/h with head up to 9.4 meters. Suitable for continuous operationLiquid temperature range: From 0 °C to +35 °C.Pumped liquid: Clean water, without fibers and with particles with maximum diameter of 10 mmMaximum immersion depth: 7 meters. Power input 50 Hz: 1 x 230 VHP 0.28In & Outlet: 1.1/4″Water Quality: Designed to pump clear water with soft solid particles up to 10mm in diameterConstruction: Made from corrosion and oxidation-resistant materials, including stainless steel componentsSubmersible pumps work by
converting rotary energy into kinetic energy to push fluids upwards.
They are designed to be submerged in the liquid, which allows them to be
self-priming. Meaning they don’t require a suction pipe or manual
priming before use. Includes thermal overload protection, an adjustable suction filter, and a long power cable with a plug.
1d
Mbombela / Nelspruit
1
R 10,625.31
SavedSave
Please note that shipping and installation is not included. Firstly Verty nova 0.4kW 400 M is a vertical delivery submersible
pump suitable for domestic applications like drainage or lifting water
form thanks or river. In the second place it may be used in automatic or
manual mode and it’s very easy to handle.
This time vertical delivery draining submersible pump is suitable for
domestic automatically operated fixed applications, for draining
basements and garages that are subject to flooding. Thanks to its
compact and easy to handle shape, and the built-in float, it is suitable
for particularly small draining wells (minimum 20×20 cm). It may also
be used as a portable pump for emergencies such as lifting water from
tanks or rivers, emptying swimming pools, fountains, excavations and
underpasses.
Hydro resistant techno polymer pump body, cover, and suction grid.
Stainless steel motor, roto shaft, and bolts and screws. Threefold seal
with interposed rings with oil pre chamber.
Submersible type continuous duty asynchronous motor. Starter enclosed
in airtight stainless steel casing, with an outer cover that protects
the wiring and the capacitor. Rotor running on permanently lubricated
ball bearings, oversized to ensure low noise and durability. Built-in
thermal amperometric protection and permanently connected capacitor.
Verty nova 0.4kW 400 M Clean water draining submersible pumps for domestic use with built in float.
Operating range: from 1 to 10m3/h with head up to 9 meters.
Pumped liquid: dirty water without fibers.
Liquid temperature range: from 0 °C to +35 °C for domestic use.
Outlet: vertical 1” ¼ F plus hose fitting.
Pump priming limit: 10-15 mm in manual operation.
Max. immersion depth: 7 meters.Power input: 1 x 230-240V
1d
Mbombela / Nelspruit
1
R 4,690
SavedSave
Please note that shipping and installation is not included.The new DAB Feka submersible pump 0.55kW were redesigned to mark the
occasion of forty years on the market and to make them even more
reliable, robust and ergonomic.
The submersible pump of the FEKA series is suitable for lifting
sewage water from cesspools, and is capable of handling suspended solid
matter with size up to 25 mm.
As has been noted high performance. NOVA and FEKA have professional
features such as the oil chamber triple seal and lubricated bearings.
Being that better protection against corrosion Motor in AISI 304
stainless steel and shaft in AISI 431 steel for better protection
against corrosion.
Technical Data
Operating range:
Flow rate up to 16 m3/h with head up to 7.5 meters
Liquid temperature range:
From 0 °C to +35 °C for domestic use. From 0 °C to +50 °C for other uses.
Output
1.1/4″ F
Pumped liquid:
Cesspool sewage water.
Max. immersion depth: 7 meters.
Maximum dry run time: 1 minute.
Protection class: IP 68.
Insulation class: F.
Free Passage: 25 mm
Most important the DAB Feka submersible pump 0.55kW with back flowing
impeller is suited to all clean and waste water loaded with solids
measuring up to 25 mm.It can be used to empty tanks, vats or cisterns,
drain flooded basements, cellars and garages, and prevent flooding when
installed in rainwater wells.It can also be used as a portable pump in
emergencies to drain water out of flooded rooms where there is mud or
detritus.
Domestic waste waterRainwater or groundwaterEmptying of wells or collection tanksEmptying of swimming pools or rooms prone to flooding
4h
Mbombela / Nelspruit
1
R 7,708
SavedSave
Please note that shipping and installation is not included.First thing to remember the DAB Novapond submersible pump 0.55kW is
specifically designed for the re circulation of water in ponds. To
create waterfalls and water features. They are designed to pump clean
water containing solid particles with a maximum diameter of 10 mm.
Suitable for continuous operation. Designed for horizontal or vertical
installation. Environmentally safe. Materials resistant to corrosion and oxidation. Motor with thermal
overload protection. Adjustable suction filter to enable transit of
solid particles with a diameter from 5 mm to 10 mm. Supplied with power
cable and plug, and self-sealing coupling.
Construction features of the pump
Hydro resistant techno polymer pump body, wear-free impellers, cover,
and suction grid. Corrosion and oxidation resistant materials.
Construction features of the motor
Submersible type continuous duty asynchronous motor. Thermal overheating protection. Wear-resistant motor shaft.
Technical Data of the DAB Novapond submersible pump 0.55kW
Operating range: From 1 to 14 m³/h with head up to 9.4 meters. Suitable for continuous operationLiquid temperature range: From 0 °C to +35 °C.Pumped liquid: Clean water, without fibers and with particles with maximum diameter of 10 mmMaximum immersion depth: 7 meters. Power input 50 Hz: 1 x 230 VHP 0.75In & Outlet: 1.1/4″Water Quality: Designed to pump clear water with soft solid particles up to 10mm in diameterConstruction: Made from corrosion and oxidation-resistant materials, including stainless steel componentsSubmersible pumps work by
converting rotary energy into kinetic energy to push fluids upwards.
They are designed to be submerged in the liquid, which allows them to be
self-priming. Meaning they don’t require a suction pipe or manual
priming before use. Includes thermal overload protection, an adjustable suction filter, and a long power cable with a plug.
1d
Mbombela / Nelspruit
1
R 34,282.99
SavedSave
Please note that shipping and installation is not included.
1d
Mbombela / Nelspruit
12
R 900
SavedSave
SOBO WP-700D submersible water pump for aquariums, ponds, and fountains.
It is known for its quiet operation and durable ceramic shaft, suitable for both fresh and saltwater applications.
Model WP-700D
Power 110 watts
Max Flow Rate 5500 L/h (liters per hour)
Max Head Height 4 meters
Voltage
Available at Petcircle located in durban north at Shop 8A 17 kennneth kaunda road Athlone durban north (northway shopping center)
5d
VERIFIED
1
R 32,284
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 2.2kW – three phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time) Flanged and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 2.2kW – three phase with shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
1d
Mbombela / Nelspruit
1
R 4,874
SavedSave
Please note that shipping and installation is not included.First thing to remember is the DAB nova for salt water 0.2kW a multi-
purpose submersible pump specifically constructed for use in salt
water. Furthermore anti-corrosive and rust-proof materials. As well as
motor casing, shaft, screws and nuts made of stainless steel AISI 316.
The pumps are designed to pump clean water or water containing solids
with a diameter from 5 to 10 mm.
Cable with tin plated conductors. Motor with thermic overload
protection. Wear resistant shaft and impeller. Excellent cooling of the
motor that enables the pump to operate even when it is partially
submersible. Manual and automatic version with start/stop float switch.
Supplied with power cable with plug and self-sealing fitting.
Technical Data of the DAB nova for salt water 0.2kW
Operating range: from 1 to 7.5 m3/h with head up to 6 meters.
Liquid temperature range: from 0 °C to +35 °C for domestic use.
Pumped liquid: dirty water, without fiber, including salt water.
Max. immersion depth: 7 meters.
Power input: 1 x 230 V
Application
The vertical delivery draining submersible pump has been specifically
built for draining applications in salt water installations. It may
also be used as a portable pump in emergency situations. The built-in
float level switch, in the automatic version, allows fixed installation,
ensuring automatic operation.
Construction features of the pump
Hydro resistant techno polymer pump body, cover, and suction grid.
AISI 316 stainless steel motor, rotor shaft, and bolts and screws.
Cable with tin plated conductors.
Construction features of the motorFinally submersible type continuous duty asynchronous motor. Thermal overheating protection.
1d
Mbombela / Nelspruit
1
R 32,768
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 1.5kW – three phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time) Flanged and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 \ ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 1.5kW – three phase ith shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
1d
Mbombela / Nelspruit
1
R 29,744
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 1.1kW – three phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time)Flange and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 1.1kW – three phase with shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.
Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
1d
Mbombela / Nelspruit
1
R 4,405.99
SavedSave
Please note that shipping and installation is not included.The new DAB Nova submersible pump 0.55kW were redesigned to mark the
occasion of forty years on the market and to make them even more
reliable, robust and ergonomic.
As has been noted high performance. NOVA and FEKA have professional
features such as the oil chamber triple seal and lubricated bearings.
Being that better protection against corrosion Motor in AISI 304
stainless steel and shaft in AISI 431 steel for better protection
against corrosion.
Technical Data
Operating range:
Flow rate up to 16 m3/h with head up to 10.2 meters
Liquid temperature range:
From 0 °C to +35 °C for domestic use. From 0 °C to +50 °C for other uses.
Output
1.1/4″ F
Pumped liquid:
Cesspool sewage water.
Max. immersion depth: 7 meters.
Maximum dry run time: 1 minute.
Protection class: IP 68.
Insulation class: F.
Free Passage: 10 mm
Most important the DAB Nova submersible pump 0.55kW line with open
impeller is suited to all clean and waste water with solids measuring up
to 10 mm. It can be used to empty tanks, vats or cisterns, drain
flooded basements, cellars and garages, and prevent flooding when
installed in rainwater wells.It can also be used as a portable pump in emergencies to drain water
out of flooded rooms. They can also be used for emptying tanks or
cisterns. The pumps are suitable for drainage of flooded basements,
cellars and garages or to prevent flooding when installed in rainwater
collector wells, which can also be used as a portable pump in emergency
situations to drain water from flooded premises.
4h
Mbombela / Nelspruit
1
Contact f/price
SavedSave
Please note that shipping and installation is not included.The new DAB Nova submersible pump 0.25kW were redesigned to mark the
occasion of forty years on the market and to make them even more
reliable, robust and ergonomic.
As has been noted high performance. NOVA and FEKA have professional
features such as the oil chamber triple seal and lubricated bearings.
Being that better protection against corrosion Motor in AISI 304
stainless steel and shaft in AISI 431 steel for better protection
against corrosion.
Technical Data
Operating range:
Flow rate up to 16 m3/h with head up to 10.2 meters
Liquid temperature range:
From 0 °C to +35 °C for domestic use. From 0 °C to +50 °C for other uses.
Output
1.1/4″ F
Pumped liquid:
Cesspool sewage water.
Max. immersion depth: 7 meters.
Maximum dry run time: 1 minute.
Protection class: IP 68.
Insulation class: F.
Free Passage: 10 mm
Most important the DAB Nova submersible pump 0.25kW line with open
impeller is suited to all clean and waste water with solids measuring up
to 10 mm. It can be used to empty tanks, vats or cisterns, drain
flooded basements, cellars and garages, and prevent flooding when
installed in rainwater wells.It can also be used as a portable pump in emergencies to drain water
out of flooded rooms. They can also be used for emptying tanks or
cisterns. The pumps are suitable for drainage of flooded basements,
cellars and garages or to prevent flooding when installed in rainwater
collector wells, which can also be used as a portable pump in emergency
situations to drain water from flooded premises.
4h
Mbombela / Nelspruit
1
R 32,907
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 1.5kW – three phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time) Flanged and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 1.5kW – three phase ith shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
1d
Mbombela / Nelspruit
1
R 34,823
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 1.5kW – single phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time) Flanged and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 1.5kW – single phase with shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
1d
Mbombela / Nelspruit
1
R 27,226
SavedSave
Please note that shipping and installation is not included.The DAB Feka FXC submersible
pumps 0.7kW – single phase is a submersible pump designed for wastewater
as well as sewage transfer in both civil and commercial settings. It
features a channel impeller with a 50mm free passage, an anti-blocking
system, and is suitable for handling gray water, rainwater, and
groundwater. The pump is also available in an ATEX version for use in potentially explosive environments.
Pumps with anti-clogging channel impeller. Suitable for drainage and
the transfer of effluent and sewage water, containing solids up to 50mm
with reduced long fiber content.
Technical Data:
Flow rate minimum and maximum: 23,8 m3/hHead up to: 33 mImmersion dept (maximum): 20 mType of pumped liquid: Loaded waters with filamentary bodies, paper or textile material in the presence of domestic or civil waste.Supported liquid temperature (maximum and minimum):+ 50°C (+ 60°C for short period of time) Flanged and threaded: From 1″½, DN32, DN40Impeller type: GrinderStart time (maximum) per hour: 20/hClass of protection: IP 68Motor insulation class: FSingle phase power input: 1x 220-240V 50HzThree phase power input: 3x 400V 50Hz / 3x 230V 50Hz on requestMaximum dry run time: 10 minPower cable (m) and plug: 10 mPossible type of installation: mobile on the ground or fixed on a coupling deviceCertification: EN 12050 ATEXSpecial versions on request: different cable lengths, different voltages and frequencies
DAB Feka FXC submersible pumps 0.7kW – single phase with shredder
designed for the drainage of waste water coming from drains in civil and
commercial environments. The pump is certified according to the
wastewater standard EN 12050-1. Pump suitable for fixed installations
with a coupling device or mobile if placed on a base directly on the
bottom of the tank.Thanks to the high-strength grinder, the pump is suitable for
installations with small-diameter pipes or those requiring high
pressures. The pump is designed for quick maintenance thanks to a
constructive solution that provides easy access to the main components
of the pump. Automatic versions with power up to 1,5 kW. ATEX version
available for use in potentially explosive environments.
1d
Mbombela / Nelspruit
1
R 2,986
SavedSave
Please note that shipping and installation is not included.The new DAB Nova submersible pump 0.20kW were redesigned to mark the
occasion of forty years on the market and to make them even more
reliable, robust and ergonomic.
As has been noted high performance. NOVA and FEKA have professional
features such as the oil chamber triple seal and lubricated bearings.
Being that better protection against corrosion Motor in AISI 304
stainless steel and shaft in AISI 431 steel for better protection
against corrosion.
Technical Data
Operating range:
Flow rate up to 16 m3/h with head up to 10.2 meters
Liquid temperature range:
From 0 °C to +35 °C for domestic use. From 0 °C to +50 °C for other uses.
Output
1.1/4″ F
Pumped liquid:
Cesspool sewage water.
Max. immersion depth: 7 meters.
Maximum dry run time: 1 minute.
Protection class: IP 68.
Insulation class: F.
Free Passage: 5mm
Most important the DAB Nova submersible pump 0.20kW line with open
impeller is suited to all clean and waste water with solids measuring up
to 10 mm. It can be used to empty tanks, vats or cisterns, drain
flooded basements, cellars and garages, and prevent flooding when
installed in rainwater wells.
It can also be used as a portable pump in emergencies to drain water
out of flooded rooms. They can also be used for emptying tanks or
cisterns. The pumps are suitable for drainage of flooded basements,
cellars and garages or to prevent flooding when installed in rainwater
collector wells, which can also be used as a portable pump in emergency
situations to drain water from flooded premises.
4h
Mbombela / NelspruitSave this search and get notified
when new items are posted!