Please note that our Terms & Conditions and Privacy Notice are applicable.
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Results for self priming water pump in "self priming water pump" in South Africa in South Africa
1
R 3,280.95
SavedSave
Please note that shipping and installation is not included.This series of SGJW self-priming jet pumps utilizes the principle of
water injection to achieve high suction, high lift and anti-fine sand
functions, and is a comprehensive pump product with high performance. It
can be used under any possible operating conditions.
Applications Fields:
Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.Widely used in living water supply, water tower water supply, well
water lifting, automatic irrigation system, various corollary equipment,
etc
Features:
The JET type self-priming pumpHigh suction, with short timeDifferent impeller material configuration
Motor:
Single-Phase 220V/50HzThree-Phase 380V/50HzMotor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous runningProtection: IP44Insulation: Class BThis series of SGJW self-priming jet pumps utilizes the principle of
water injection to achieve high suction, high lift and anti-fine sand
functions, and is a comprehensive pump product with high performance. It
can be used under any possible operating conditions.
Performance Range
Flow: 4.2m3/hHead: 46m Suction head up.
6d
Mbombela / Nelspruit
1
R 884.08
SavedSave
Please note that shipping and installation is not included.Seakoo QB60L self-priming peripheral pump 0.37Kw
QB-Self Priming Pressure Pump Motor
2 pole induction motor.Single phase 220V, 50/60Hz.Insulation: Class B/Class F.Protection: IP44.With capacitor and thermal overload protector.
QB-Self Priming Pressure Pump Material
Pump body: Cast Iron.Motor support: Aluminum.Impeller: Brass.Motor shaft: Stainless Steel or CS45#.Mechanical seal: Ceramic-Graphite.100% copper winding.
Operating Conditions
Suction lift up to 8m.Liquid temperature up to +40℃.Ambient temperature up to +40℃.Max. working pressure: 6 bar.
What is the purpose of a self-priming pump?
Seakoo
QB60L Self-Priming Peripheral Pump are a specific type of liquid pump
designed to have the required liquid inside the cavity or pump body
necessary to start the pumping process. This offers the potential for
increased operating efficiencies in process plants where pumps are used
for a variety of repeated yet intermittent operations.
7d
Mbombela / Nelspruit
1
R 1,519.52
SavedSave
Please note that shipping and installation is not included.Seakoo QB60L self-priming peripheral pump 0.37Kw + controller
2 pole induction motor.Single phase 220V, 50/60Hz.Insulation: Class B/Class F.Protection: IP44.With capacitor and thermal overload protector.
QB-Self Priming Pressure Pump Material
Pump body: Cast Iron.Motor support: Aluminum.Impeller: Brass.Motor shaft: Stainless Steel or CS45#.Mechanical seal: Ceramic-Graphite.100% copper winding.
Operating Conditions
Suction lift up to 8m.Liquid temperature up to +40℃.Ambient temperature up to +40℃.Max. working pressure: 6 bar.
How does a Seakoo QB60L self-priming peripheral pump 0.37Kw + controller work?
In
its priming mode, the pump essentially acts as a liquid-ring pump. The rotating impeller generates a vacuum at the impeller’s ‘eye’ which draws
air into the pump from the suction line. At the same time, it also
creates a cylindrical ring of liquid on the inside of the pump casing.
7d
Mbombela / Nelspruit
1
R 10,841.05
SavedSave
Please note that shipping and installation is not included.
Firstly the Pedrollo PKM100 peripheral high pressure non self priming
pump 1.1KW. Is suitable for use with clean water that does not contain
abrasive particles and liquids that are not chemically aggressive
towards the materials from which the pump is made.
Thanks to their reliability, the fact that they are easy to use and
are economical, they are ideal for domestic use and in particular for
distributing water in combination with small pressure sets and for the
irrigation of gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit:
Temperature of the liquid from -10 °C to +60 °C Ambient temperature up to +40 °C (+50 °C for PK 60)Manometric suction lift up to 8 mMax. working pressure: – 10 BAR
Performance Range:
Flow rate up to 70 l/min
Head up to 80m In/ outlet: 1″
4d
Mbombela / Nelspruit
1
R 3,614.45
SavedSave
Please note that shipping and installation is not included.
Firstly the Pedrollo PK60-3P Peripheral High Pressure Non Self
Priming Pump 0.37KW. Is suitable for use with clean water that does not
contain abrasive particles and liquids that are not chemically
aggressive towards the materials from which the pump is made.
Thanks to their reliability, the fact that they are easy to use and
are economical, they are ideal for domestic use and in particular for
distributing water in combination with small pressure sets and for the
irrigation of gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit:
Temperature of the liquid from -10 °C to +60 °C Ambient temperature up to +50°CManometric suction lift up to 8 mMax. working pressure: – 6 BAR
Performance Range:
Flow rate up to 40 l/min
Head up to 38 m
4d
Mbombela / Nelspruit
1
R 12,647.70
SavedSave
Please note that shipping and installation is not included.
First thing to remember the Pedrollo PK300-3P peripheral high
pressure non self priming pump 2.2kW .Is suitable for use with clean
water that does not contain abrasive particles and liquids that are not
chemically aggressive towards the materials from which the pump is made.
As a result of their reliability, the fact that they are easy to use
and are economical, they are ideal for domestic use and in particular
for distributing water in combination with small pressure sets and for
the irrigation of gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit:
Firstly temperature of the liquid from -10 °C to +60 °C Ambient temperature up to +40 °C (+50 °C for PK 60)Manometric suction lift up to 8 mMax. working pressure: – 10 BAR
Performance Range:
Flow rate up to 90 l/min
Head up to 95m In as well as outlet: 1″
4d
Mbombela / Nelspruit
1
R 8,191.45
SavedSave
Please note that shipping and installation is not included.
Firstly the Pedrollo PK90-3P peripheral high pressure non self
priming pump 0.75KW. Is suitable for use with clean water that does not
contain abrasive particles and liquids that are not chemically
aggressive towards the materials from which the pump is made.
Thanks to their reliability, the fact that they are easy to use and
are economical, they are ideal for domestic use and in particular for
distributing water in combination with small pressure sets and for the
irrigation of gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit:
Temperature of the liquid from -10 °C to +60 °C Ambient temperature up to +40 °C (+50 °C for PK 60)Manometric suction lift up to 8 mMax. working pressure: – 10 BAR
Performance Range: Flow rate up to 40 l/min
Head up to 38 m
4d
Mbombela / Nelspruit
1
R 11,528.75
SavedSave
Please note that shipping and installation is not included.
Firstly the Pedrollo PK200-3P Peripheral High Pressure Non Self
Priming Pump 1.5KW is suitable for use with clean water that does not
contain abrasive particles and liquids that are not chemically
aggressive towards the materials from which the pump is made.
Thanks to their reliability, the fact that they are easy to use and
are economical, they are ideal for domestic use and in particular for
distributing water in combination with small pressure sets and for the
irrigation of gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit:
Temperature of the liquid from -10 °C to +60 °C Ambient temperature up to +40 °C (+50 °C for PK 60)Manometric suction lift up to 8 mMax. working pressure: – 10 BAR
Performance Range:
Flow rate up to 80 l/min
Head up to 86m In/outlet: 1″
4d
Mbombela / Nelspruit
1
R 11,804.75
SavedSave
Please note that shipping and installation is not included.
Firstly the Pedrollo PKM200 peripheral high pressure non self priming
pump 1.5KW is suitable for use with clean water that does not contain
abrasive particles and liquids that are not chemically aggressive
towards the materials from which the pump is made.
Thanks to their reliability, the fact that they are easy to use and
are economical, they are ideal for domestic use and in particular for
distributing water in combination with small pressure sets and for the
irrigation of gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit:
Temperature of the liquid from -10 °C to +60 °C Ambient temperature up to +40 °C (+50 °C for PK 60)Manometric suction lift up to 8 mMax. working pressure: – 10 BAR
Performance Range:
Flow rate up to 80 l/min
Head up to 86m In/ outlet: 1″
4d
Mbombela / Nelspruit
1
R 7,047.20
SavedSave
Please note that shipping and installation is not included.
Firstly the Pedrollo PK80-3P peripheral high pressure non self
priming pump 0.75KW is suitable for use with clean water that does not
contain abrasive particles and liquids that are not chemically
aggressive towards the materials from which the pump is made.
Thanks to their reliability, the fact that they are easy to use and
are economical, they are ideal for domestic use and in particular for
distributing water in combination with small pressure sets and for the
irrigation of gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit:
Temperature of the liquid from -10 °C to +60 °C Ambient temperature up to +40 °C (+50 °C for PK 60)Manometric suction lift up to 8 mMax. working pressure: – 7 BAR
Performance Range:
Flow rate up to 50 l/min
Head up to 66m In/ outlet: 1″
4d
Mbombela / Nelspruit
1
R 4,697.75
SavedSave
Please note that shipping and installation is not included.
Firstly the Pedrollo PK65-3P peripheral high pressure non self
priming pump 0.5 kW is suitable for use with clean water that does not
contain abrasive particles and liquids that are not chemically
aggressive towards the materials from which the pump is made.
Thanks to their reliability, the fact that they are easy to use and
are economical, they are ideal for domestic use and in particular for
distributing water in combination with small pressure sets and for the
irrigation of gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit:
Temperature of the liquid from -10 °C to +60 °C Ambient temperature up to +40 °C (+50 °C for PK 60)Manometric suction lift up to 8 mMax. working pressure: – 6 BAR
Performance Range:
Flow rate up to 50 l/min
Head up to 50 m
4d
Mbombela / Nelspruit
1
R 11,142.35
SavedSave
Please note that shipping and installation is not included.
Firstly the Pedrollo PK100-3P peripheral high pressure non self
priming pump 1.1KW is suitable for use with clean water that does not
contain abrasive particles and liquids that are not chemically
aggressive towards the materials from which the pump is made.
Thanks to their reliability, the fact that they are easy to use and
are economical, they are ideal for domestic use and in particular for
distributing water in combination with small pressure sets and for the
irrigation of gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit:
Temperature of the liquid from -10 °C to +60 °C Ambient temperature up to +40 °C (+50 °C for PK 60)Manometric suction lift up to 8 mMax. working pressure: – 10 BAR
Performance Range:
Flow rate up to 70 l/min
Head up to 80m In/ outlet: 1″
4d
Mbombela / Nelspruit
1
R 7,519.05
SavedSave
Please note that shipping and installation is not included.
Firstly the Pedrollo PKM90 peripheral high pressure non self priming
pump 0.75KW is Suitable for use with clean water that does not contain
abrasive particles and liquids that are not chemically aggressive
towards the materials from which the pump is made.
Thanks to their reliability, the fact that they are easy to use and
are economical, they are ideal for domestic use and in particular for
distributing water in combination with small pressure sets and for the
irrigation of gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit:
Temperature of the liquid from -10 °C to +60 °C Ambient temperature up to +40 °C (+50 °C for PK 60)Manometric suction lift up to 8 mMax. working pressure: – 10 BAR
Performance Range:
Flow rate up to 40 l/min
Head up to 82m In/ outlet: 3/4″
4d
Mbombela / Nelspruit
1
R 4,156.10
SavedSave
Please note that shipping and installation is not included.
Firstly the Pedrollo PKM65 peripheral high pressure non self priming
pump 0.5KW is suitable for use with clean water that does not contain
abrasive particles and liquids that are not chemically aggressive
towards the materials from which the pump is made.
Thanks to their reliability, the fact that they are easy to use and
are economical, they are ideal for domestic use and in particular for
distributing water in combination with small pressure sets and for the
irrigation of gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit:
Temperature of the liquid from -10 °C to +60 °C Ambient temperature up to +40 °C (+50 °C for PK 60)Manometric suction lift up to 8 mMax. working pressure: – 6 BAR
Performance Range:
Flow rate up to 50 l/min
Head up to 50 m
4d
Mbombela / Nelspruit
1
R 1,899.80
SavedSave
Please note that shipping and installation is not included.
Firstly the Pedrollo PKM60 peripheral high pressure non self priming
pump 0.37KW is suitable for use with clean water that does not contain
abrasive particles and liquids that are not chemically aggressive
towards the materials from which the pump is made.
Thanks to their reliability, the fact that they are easy to use and
are economical, they are ideal for domestic use and in particular for
distributing water in combination with small pressure sets and for the
irrigation of gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Application Limit:
Temperature of the liquid from -10 °C to +60 °C Ambient temperature up to +40 °C (+50 °C for PK 60)Manometric suction lift up to 8 mMax. working pressure: – 6 BAR
Performance Range:
Flow rate up to 40 l/min
Head up to 38 m
4d
Mbombela / Nelspruit
1
R 3,084.30
SavedSave
Please note that shipping and installation is not included.Application Limits
Suction head up to 9mLiquid temperature up to +40℃Ambient temperature up to +40℃Max. Working pressure: 6barVoltage fluctuation should not exceed 10% f rated value.pH: 6.5 to 8.5
Applications Fields
Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.The Shimge SGJW 0.55KW JET Self-Priming Jet Pump
is widely used in well water lifting, garden irrigation, vegetable
greenhouse water supply, breeding industry water supply and drainage,
pipeline boosting, etc.
Features
Complete modelsCopper impeller, stainless steel pump coverPump body with installation foot set
Motor
Single-Phase 220V/50HzMotor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous runningProtection: IP44Insulation: Class B
6d
Mbombela / Nelspruit
1
R 15,903.35
SavedSave
Please note that shipping and installation is not included.Pedrollo DG PED5-Automatic pressurisation system with inverter. Which
integrates a built-in high efficiency self-priming pump, a accumulator
tank, pressure and flow rate sensors and a non-return valve.DG PED is a compact autonomous quiet and high
performance pumping system. The sophisticated electronically controlled
inverter, at the heart of the system, in an intuitive way:
maintains the pressure of the installation constant by regulating
the velocity of the pump in accordance with the water required;controls the hydraulic and electric operating parameters and protects the pump from abnormalities;can be equipped with an expansion card that makes it possible to work in parallel with other DG PED in the pumping groups and to manage input and output signalsit adapts to every type of pressurisation system, including existing onesit limits the starting and operating currents in order to provide a greater saving of energy.
Features:
Liquid type: Clean Water
Uses: domestic, civil
Applications: water supply systems, pressure systems
Typology: electric pumps with variable speed control
Family: self-priming
Performance Range of Pedrollo DG PED5-Automatic pressurisation system with inverter:
Flow rate up to 120.00 l/min (7.2 m³/h) Head up to 55.00 m
4d
Mbombela / Nelspruit
1
R 3,248.75
SavedSave
Please note that shipping and installation is not included.This series of SGJW self-priming jet pumps utilizes the principle of
water injection to achieve high suction, high lift and anti-fine sand
functions, and is a comprehensive pump product with high performance. It
can be used under any possible operating conditions.
Application Limits
Suction head up to 9mLiquid temperature up to +40℃Ambient temperature up to +40℃Max. Working pressure: 6 barVoltage fluctuation should not exceed 10% f rated value.pH: 6.5 to 8.5
Applications Fields
Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.Widely used in well water lifting, garden irrigation, vegetable
greenhouse water supply, breeding industry water supply and drainage,
pipeline boosting, etc.
Features
Complete modelsCopper impeller, stainless steel pump coverPump body with installation foot set
MotorSingle-Phase 220V/50HzMotor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous runningProtection: IP44Insulation: Class BPerformance Range
Flow: 5.4m3/hHead: 52m Suction head up.
6d
Mbombela / Nelspruit
1
R 6,051.30
SavedSave
Please note that shipping and installation is not included. Pedrollo PQM70 – 0.6KW Limits:
water supply systemsair conditioning systemswashing systemspressure systemscooling systemsironing systemirrigation pumps
Application Limit:
Temperature of the liquid from -10 °C to +90 °C Ambient temperature between -10 °C and +40 °C (+50 °C for PQ 60)Manometric suction lift up to 8 mMax. working pressure: – 7 bar
The hydraulic characteristics of the Mono-Phase : PQ Series
Peripheral High Pressure Non Self Priming Pumps, coupled with their
compactness. Makes them suitable for use in both domestic and industrial
applications.
Markedly suitable for use with clean water that does not contain
abrasive particles and liquids that are not chemically aggressive
towards the materials from which the pump is made.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
4d
Mbombela / Nelspruit
5
10d
CaledonSave this search and get notified
when new items are posted!