Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Home & Garden
Results for moulder in Power Tools in Eastern Cape
10
R 90,000
SavedSave
ELEKTRA BECKUM Multi 310G combination machine.
Featuring 310mm planer, thicknesser, spindle moulder, morticer and saw.
Cast iron tables.
Single phase 220 Volt 1.80 kW with 3x motors.
Cutter blocks and tooling for spindle. Extra planer blades.
Includes dust collector and ducting. Parts are already crated but you will have to crate the machine. Collection, crating and loading not included. Collect in Cape St Francis, Eastern Cape.
For more detailed information and photos contact Willie on 0810930964.
3mo
Ads in other locations
12
R 34,500
NEGOTIABLE
SavedSave
Griggio LM 310 I TILTING COMBI MACHINE
Dusty, but perfectly working Single Phase 240volt 5-in-One saw
Bench/Planer/Thicknesser/Spindle Moulding/Mortising combination –
Full Panel Saw with 1630mm cross-cut capacity
The 310mm planer is adjustable and has a tilting
guide as shown with suitable blade protection.
310mm Thicknesser.
Spindle Moulder
Mortising table attached to planner and
provides full 3-D Mortising movement.
3 separate motors – full 240volt system.
Technical data:
- Planing working table sizes 310x1380 mm.
- Thicknessing working table sizes 310x750 mm.
- Saw and spindle moulder working table sizes 500X1185 mm.
- High stifness tilting planer fence 0°-45° 1100x150 mm.
- Diam. of the spindle with 3 knives 95 mm.
- Shaft rotation speed 4200 r.p.m.
- Max. thicknessing working height 3/230 mm.
- Max. thicknessing working removal 5 mm.
- Diam. of feeding rollers 40 mm.
- Feeding speed of the piece 8 m/1'
- Spindle moulder at 4 speeds 1400-3500-6000-8000 r.p.m.
- Spindle moulder shaft tilting -5°+45°
- Diam. of table collars 75-105-140-180 mm.
- Diam. standard of spindle moulder shaft 30 mm.
- Max. diam. of the tool 200 mm.
- Max. diam. of the tool under the table 175 mm.
- Useful length of spindle moulder shaft 130 mm.
- Spindle moulder fence with adjustable extensions
- Tilting saw unit 0°-45°
- Max. blade diam.with scoring blade fitted 315 mm.
- Max. scoring blade diam. 100 mm.
- Max. cut height with blade 300 mm. 90 mm.
- Max. cut height with blade 250 mm. 65 mm.
- Blade rotation speed 4000 r.p.m.
- Rip fence with micrometric adjustment
- Cut width between blade and rip fence 800 mm.
- Machine with 3 motors each 3 hp (2,2 kw)
- Suction dust hood diam. 100 mm.
- Alu carriage sliding on hardened and polished rails 1500x285 mm.
- Cross-cutting frame complete with alu telescopic fence and 2
flip over stops 630x1050 mm.
- Mortising unit complete with eccentric woodpresser and Wescott
chuck 0-16 mm.
16d
8
R 7,000
NEGOTIABLE
SavedSave
Spindle Moulder/Shaper/Router Table for SaleThis Delta Milwaukee Homecraft Shaper/Spindle Moulder comes from the late 1930's but is still going strong. The solid machine sits on a sturdy custom-made wooden table and allows work pieces to be fed into the cutting blades from either the left or the right side. This is due to a lever that can be switched to change the rotation of the cutting knives in the opposite direction. That makes it possible to adjust the machine to the workflow and layout of your workshop. It is also possible to adjust the left and right side of the fence individually.The height adjustment of the cutter is super easily done by the movement of a large lever. Another lever is then used to fix the height adjustment so that it does not alter its height during operation. An adjustable mitre gauge can be used to move work pieces safely along the fence.Included in the offer are 20+ moulding cutterhead knives, some of which have never been used before and are still in the original plastic packaging. The original booklets from the time are also included and give a glimpse into how the craftsmen of yesteryear approached their work.This Shaper/Spindle Moulder does basically perform the same function as a modern handheld router mounted upside down onto a router table, but is much more powerful due to its large cutting heads that a normal router is just too weak and unsuitable to perform. The Shaper/Spindle Moulder is ideal if you have to do a lot of mouldings.
24d
VERIFIED
8
Contact f/price
SavedSave
1) Panel Saw 1500 mm Sliding Table 2) Planer Table 310 x 1285 mm3) Thicknessing table 310 x 600 mm4) Spindle Moulder Shaft 30 mm 5) Mortising Table 161 x 368 mm C310-410Q included6) Weight 440 kgs net
1mo
12
Contact f/price
SavedSave
We specialize in Woodworking and Carpentry Machinery, Tools & Accessories. We have built our expertise with over 60 of experience in the industry. Gauteng Jacque 0817947754 or for info Whatsapp 0654114434Equipment for Cut and Edge, Kitchen Manufacturing, Shop Fitting, Solid Woods and Joinery.Our Woodworking machinery:• Endgebanders• Wood Planers• Panel Saws• Sanders• CNC Routers• Spindle Moulders• Laser Cutters• Thicknessers
2y
VERIFIED
1
R 36,995
SavedSave
All Tools and machinery are brand new the price is not negotiable.
DELUX SPINDLE MOULDER WITH SLIDING TABLE
From LiDL tools & machinery
Best value for a LiDL price.
082-6983641 Jo
7y
Save this search and get notified
when new items are posted!