Please note that our Terms & Conditions and Privacy Notice are applicable.
Pay OnlineSECURELYEASY DELIVERY OR COLLECTION
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Suggested
Results for used water pumps in "used water pumps" in Mpumalanga in Mpumalanga
1
R 1,115
SavedSave
Please note that shipping and installation is not included.Firstly DAB pump controller 1.1kW device designed to control the pump‘s starting and stopping based on demand. It stops the pump when there is no water and protects it from dry running. Also it can be mounted on surface and submersible pumps alike. The compact device is reliable and designed, above all, for residential applications.DAB pump controller 1.1kW can be mounted on the actual pump or between the pump and the first point of use. To put the device into operation, simply perform the wiring and supply power. From now on, Quick Press will start and stop the pump based on water demand (opening and closing). If there is a power outage, the unit restarts automatically when power is resumed. The control panel is designed to indicate run status and report any operating issues.
Technical Data
Supply voltage: 1×230 Vac (+/- 10%) 50/60 HzMax. current: 12 AOutput: 1,1 – 2.2 kWProtection rating: IP65Max. working pressure: 10 barMinimum flow rate: ≈ 1 l/minMale connection: 1’’ BSPRestart pressure setting: 1,5 Bar (non-adjustable)Max. working temperature: 60°CCertifications for drinking water use: ACS e AS/NZ 4020
7d
Mbombela / Nelspruit
1
R 1,983
SavedSave
Please note that shipping and installation is not included.Firstly DAB pump controller 2.2kW device designed to control the pump‘s starting and stopping based on demand. It stops the pump when there is no water and protects it from dry running. Also it can be mounted on surface and submersible pumps alike. The compact device is reliable and designed, above all, for residential applications.
DAB pump controller 2.2kW can be mounted on the actual pump or between the pump and the first point of use. To put the device into operation, simply perform the wiring and supply power. From now on, Quick Press will start and stop the pump based on water demand (opening and closing). If there is a power outage, the unit restarts automatically when power is resumed. The control panel is designed to indicate run status and report any operating issues.
Technical Data
Supply voltage: 1×230 Vac (+/- 10%) 50/60 HzMax. current: 12 AOutput: 1,1 – 2.2 kWProtection rating: IP65Max. working pressure: 10 barMinimum flow rate: ≈ 1 l/minMale connection: 1’’ BSPRestart pressure setting: 1,5 Bar (non-adjustable)Max. working temperature: 60°CCertifications for drinking water use: ACS e AS/NZ 4020
7d
Mbombela / Nelspruit
1
R 12,223.44
SavedSave
Please note that shipping and installation is not included.
Seakoo Cube SK1000 VSD Pump 1.0 kW. Variable speed drive, full LED touch screen, energy saving, very silent, simple and easy to install. Energy saving of the VSD permanent magnet motor. Consume +- 600-1200W (pending on flow). Solar system friendly – pump have “soft start” and do not have high start amperage (power) required from regular booster pumps. Can be installed vertical or horizontal. Important to realize the pump can supply water for up to 5 irrigation sprinklers (pending on nozzle and pipe size). Pump suitable for medium to large homes. Pump need to be installed under cover or roof in area that cannot flood.Power: 1kW.Max. Flow: 7200 l/h.Max. Head: 50m.Max. Suction: 6m.
Optimal energy use This is different from general pumps that work at a constant speed. A variable pump adjusts its speed according to water demand. For example, when water demand decreases, the VFD will reduce the motor speed. which will cut off the required power. This flexibility in speed control helps prevent unnecessary energy consumption. For homes that do not require constant high water pressure. The pump uses least energy during periods of low water demand, which saves a lot of wear.
Longer Life Span
Seakoo Cube SK1000 VSD Pump 1.0 kW also reduce mechanical wear. A traditional pump that is turned on and off many times reduces its lifespan. In contrast, a VFD can maintain a consistent and reasonable speed, thus preventing sudden starts and stops. This reduces stress on pump components. This results in lower maintenance costs and longer equipment life. Examples of use within the country in residence Variable frequency pumps work efficiently in applications such as garden irrigation, hot water circulation and pond water systems.
7d
Mbombela / Nelspruit
1
R 3,280.95
SavedSave
Please note that shipping and installation is not included.This series of SGJW self-priming jet pumps utilizes the principle of water injection to achieve high suction, high lift and anti-fine sand functions, and is a comprehensive pump product with high performance. It can be used under any possible operating conditions.
Applications Fields:
Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.Widely used in living water supply, water tower water supply, well water lifting, automatic irrigation system, various corollary equipment, etc
Features:
The JET type self-priming pumpHigh suction, with short timeDifferent impeller material configuration
Motor:
Single-Phase 220V/50HzThree-Phase 380V/50HzMotor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous runningProtection: IP44Insulation: Class BThis series of SGJW self-priming jet pumps utilizes the principle of water injection to achieve high suction, high lift and anti-fine sand functions, and is a comprehensive pump product with high performance. It can be used under any possible operating conditions.
Performance Range
Flow: 4.2m3/hHead: 46m Suction head up.
7d
Mbombela / Nelspruit
1
R 24,992
SavedSave
Please note that shipping and installation is not included.DAB EsyBox Premium is a booster pump designed for use with drinking The first of it’s kind water in domestic systems and gardening applications. It’s a compact product with integrated components that allows simple and efficient. Modular Creating two-pump sets has never been easier with the Esytwin quick connect station. Outstanding performance with a 50% smaller footprint than equivalent traditional systems.domestic pressurization management.A Complete kit Esytank is a 480-litre tank that comes with Esydock, for quick installation of Esybox above ground. Esytank is also modular: additional tanks can be installed on three sides. Use Finally the DAB EsyBox Premium villas and small apartment complexes with up to 6 floors and 9 apartments.
Pump data
Pressure rating: 8 bar (800 kPa)Settable constant pressure from 1 to 6 barMin. fluid temperature: 0°CMax. fluid temperature: 40°CMax. Ambient temperature: 50°CIn conclusion these matching features and technology, the DAB easy box series is one of the best pump for domestic use to bring running water to your household. However, every specific use needs analysis from technical personnel to ensure the pump will meet the needs of the client. Compact and completely integrated, it’s suitable for use with drinkable water, in domestic systems and gardening applications. Managing the water pressure in your home has never been so easy and quiet.Pump connections: Suction side : 1″Discharge side : 1″
21h
Mbombela / Nelspruit
1
R 3,248.75
SavedSave
Please note that shipping and installation is not included.This series of SGJW self-priming jet pumps utilizes the principle of water injection to achieve high suction, high lift and anti-fine sand functions, and is a comprehensive pump product with high performance. It can be used under any possible operating conditions.
Application Limits
Suction head up to 9mLiquid temperature up to +40℃Ambient temperature up to +40℃Max. Working pressure: 6 barVoltage fluctuation should not exceed 10% f rated value.pH: 6.5 to 8.5
Applications Fields
Suitable for transferring water without abrasive particles or other liquid whose properties are similar to water.Widely used in well water lifting, garden irrigation, vegetable
greenhouse water supply, breeding industry water supply and drainage,
pipeline boosting, etc.
Features
Complete modelsCopper impeller, stainless steel pump coverPump body with installation foot set
MotorSingle-Phase 220V/50HzMotor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous runningProtection: IP44Insulation: Class BPerformance Range
Flow: 5.4m3/hHead: 52m Suction head up.
7d
Mbombela / Nelspruit
1
R 4,122
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 0.75kW – single phase centrifugal pump is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.DAB centrifugal single impeller K pump 0.75kW – single phaseMaximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Single-phase 220-240 VCONSTRUCTION FEATURES OF THE PUMP
Inlet: 1″Outlet: 1″Pump body and motor support in cast iron.
Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
1d
Mbombela / Nelspruit
1
R 6,060
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 0.75kW – three phase centrifugal pump is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 0.75kW – three phaseMaximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 230 V -400 VCONSTRUCTION FEATURES OF THE PUMP
Inlet: 1″Outlet: 1″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
21h
Mbombela / Nelspruit
1
R 4,244
SavedSave
Please note that shipping and installation is not included.DAB Centrifugal Single impeller K pump 0.37kW – three phase centrifugal pump suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB Centrifugal Single impeller K pump 0.37kW – three phase
Maximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1″Outlet: 1″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
21h
Mbombela / Nelspruit
1
R 15,939
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 3kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.DAB centrifugal single impeller K pump 3kW – three phaseMaximum operating pressure: 10 bar (1000 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2″Outlet: 1.1/4″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
21h
Mbombela / Nelspruit
1
R 47,880
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 11 kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 11 kW – three phaseMaximum operating pressure: 8 bar (800 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2.1/2″Outlet: 2″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
21h
Mbombela / Nelspruit
1
R 19,395
SavedSave
Please note that shipping and installation is not included. DAB Centrifugal single impeller K pump 2.2kW – single phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB Centrifugal single impeller K pump 2.2kW – single phaseMaximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.
Standard voltage: Single-phase 220-240 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2 1/2″Outlet: 2″
Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
21h
Mbombela / Nelspruit
1
R 11,636
SavedSave
Please note that shipping and installation is not included.DAB Centrifugal single impeller K pump 1.8kW – single phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.DAB Centrifugal single impeller K pump 1.8kW – single phaseMaximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Single-phase 220-240 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2″Outlet: 2″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
21h
Mbombela / Nelspruit
1
R 5,091
SavedSave
Please note that shipping and installation is not included.DAB Centrifugal single impeller K pump 0.75kW – single phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB Centrifugal single impeller K pump 0.75kW – single phaseMaximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.
Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Single-phase 220-240 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1.1/2″Outlet: 1″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
1d
Mbombela / Nelspruit
1
R 43,394
SavedSave
Please note that shipping and installation is not included.APPLICATIONS
DAB centrifugal single impeller K pump 7.5kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.CONSTRUCTION FEATURES OF THE MOTORClosed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.DAB centrifugal single impeller K pump 7.5kW – three phaseMaximum operating pressure: 10 bar (1000 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.
Standard voltage: Three-phase 230-400 VCONSTRUCTION FEATURES OF THE PUMPInlet: 2.1/2″Outlet: 2″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
21h
Mbombela / Nelspruit
1
R 18,183
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 4kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 4kW – three phaseMaximum operating pressure: 8 bar (800 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2.1/2″Outlet: 2″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
21h
Mbombela / Nelspruit
1
R 16,971
SavedSave
Please note that shipping and installation is not included.DAB Centrifugal single impeller K pump 4kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB Centrifugal single impeller K pump 4kW – three phaseMaximum operating pressure: 8 bar (800 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.Installation: Horizontal or vertical position, provided that the motor is always above the pump. Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage:
Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2″Outlet: 2″
Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
21h
Mbombela / Nelspruit
1
R 10,546
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 1.8kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 1.8kW – three phaseMaximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2″Outlet: 2″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
21h
Mbombela / Nelspruit
1
R 3,698
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 0.37kW – single phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.Techno polymer or cast iron impeller, as per the TECHNICAL DATA table.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of
remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 0.37kW – single phaseMaximum operating pressure: 6 bar (600 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump. Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.Standard voltage: Single-phase 220-240 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 1″Outlet: 1″
Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
1d
Mbombela / Nelspruit
1
R 46,547
SavedSave
Please note that shipping and installation is not included.DAB centrifugal single impeller K pump 9.2kW – three phase is suitable for domestic, civil, industrial and agricultural systems, and for decanting, mixing and irrigation uses.
CONSTRUCTION FEATURES OF THE PUMP
Pump body and motor support in cast iron.
Techno polymer or cast iron impeller, as per the TECHNICAL DATA.Carbon/ceramic mechanical seal.
CONSTRUCTION FEATURES OF THE MOTOR
Closed asynchronous type, external ventilation cooling.Rotor running on ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
DAB centrifugal single impeller K pump 9.2kW – three phaseMaximum operating pressure: 8 bar (800 kPa)Maximum ambient temperature: +40°CLiquid temperature range: From -10 °C to +50 °C.
Installation: Horizontal or vertical position, provided that the motor is always above the pump.Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, non-crystallized and chemically neutral, with properties similar to water.
Standard voltage:Three-phase 230-400 V
CONSTRUCTION FEATURES OF THE PUMP
Inlet: 2.1/2″Outlet: 2″Pump body and motor support in cast iron.Techno polymer or cast iron impeller.Carbon/ceramic mechanical seal.
21h
Mbombela / NelspruitSave this search and get notified
when new items are posted!