Please note that our Terms & Conditions and Privacy Notice are applicable.
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Suggested
Results for lift to in "lift to" in Mpumalanga in Mpumalanga
2
6d
8
6d
1
3d
4
20d
Bethal
1
R 47.66
SavedSave
Please note that shipping and installation is not included.The effectiveness of top strainer 27mm and ion exchange media is a
function of the surface area in contact with the solution to be treated.
Distributors help spread the water throughout the media for increased
contact and the prevention of channeling.
Firstly in cleaning systems, top strainer 27mm. The upper ones
protect the control valve from being clogged by particles of a granular
load. The lower ones evenly distribute the flow of water leaving the
lifting tube in different directions. Also collect the already filtered
water and send it back to the lifting tube.
Top strainer 27mm might vary in shape, size, diameter and other
characteristics. That are tailored to the specific requirements of the
water treatment system. However, in general, the switch gear is a
compact piece made from durable, impact-resistant plastic. Certainly in
the walls of the distributor housing there are threaded bore holes. As
well as a hole through which the device is connected to the
water-lifting tube. There are calibrated slots and connecting threads in
the housing or the beams (extending to all sides of the side plastic
tubes).It is generally made of PP, ABS, PVC and features simple structure,
easy operation, easy to install and remove, low energy consumption,
small footprint and long lifespan. It is often used in pre-filtration
systems, softened water treatment equipment, filter tanks or mixing
tanks.
14d
Mbombela / Nelspruit
1
4d
Other Mpumalanga
3
6d
1
4d
Other Mpumalanga
1
4d
Other Mpumalanga
1
R 458.30
SavedSave
Please note that shipping and installation is not included.The Filter Housing : 10″ Big Blue 1 inch ports is ideal for Whole of
house, Pumps, Tanks. Any where a high flow rate is required eg. house,
rural or commercial applications.
Larger filters can be used which have a bigger capacity and longer
service life compared to standard size smaller filter housings.
A range of filters are available for every situation.
Flow rate up to 80Lpm depending on filter used and water pressure & flow.
Dimensions are 340mm high without bracket x 185mm wide
Max pressure 620 kpa
Filter Housing : 10″ Big Blue 1 inch ports
Firstly we have a wide range of Filter Cartridges. So please look
below if you can find the filter that you require. In due time do not
hesitate to contact us if you need a filter not on the list.
Important
to realize a Filter Cartridges is a piece of tubular filtration
equipment. That can be used across various industries. For an array of
filtration requirements. A cartridge is encased within a housing or a
casing and used to remove unwanted particles, pollutants, and chemicals
from liquids.Cartridge
filters are perfect for industries where ultra-pure water filtration is
required because of the small micron size filters that are available.
7d
Mbombela / Nelspruit
1
4d
Other Mpumalanga
1
R 171.12
SavedSave
Please note that shipping and installation is not included.The PP Melt-blown Sediment 20 Inc Big Blue Filter is constructed by three layers three of heat melting polypropylene. Compared to monolayer, the application life of PP melt blown filter cartridge with three layers is much longer. Therefore, the maintenance of the filters can be cut down a lot. Using the right heating way for PP fiber, can reduce the filtering resistance a lot and enlarge the water flow much The uniform space of fiber can achieve an excellent filtering effect As the filter cartridge is only made from polypropylene, the resistance to chemical reagents for both organic solvent and the inorganic solvent is all good.Most water purifiers use a polypropylene sediment removal filter cartridge for the first stage of the filter element. The first stage of the filter element is not only directly affects the water quality but also affects the subsequent secondary or tertiary filtration effect and the life of the filter element. Therefore, the quality of the PP filter is especially important for water purifiers.
If the RO system is not equipped with a polypropylene sediment removal filter, the raw water directly enters the RO membrane. Excessive particles, precipitates, microorganisms, and bacterial viruses that are not treated will block in the RO membrane, and the life of the RO membrane will be shortened, which will also affect the quality of the final water.
4d
Mbombela / Nelspruit
1
R 26.22
SavedSave
Please note that shipping and installation is not included.The PP Melt-blown Sediment 10 Inc Standard Filter removal filter cartridge is constructed by three layers three of heat melting polypropylene. Compared to mono layer, the application life of PP melt blown filter cartridge with three layers is much longer. Therefore, the maintenance of the filters can be cut down a lot .Using the right heating way for PP fiber, can reduce the filtering resistance a lot and enlarge the water flow much The uniform space of fiber can achieve an excellent filtering effect As the filter cartridge is only made from polypropylene, the resistance to chemical reagents for both organic solvent and the inorganic solvent is all good.Most water purifiers use a polypropylene sediment removal filter cartridge for the first stage of the filter element. The first stage of the filter element is not only directly affects the water quality but also affects the subsequent secondary or tertiary filtration effect and the life of the filter element. Therefore, the quality of the PP filter is especially important for water purifiers.If the RO system is not equipped with a polypropylene sediment removal filter, the raw water directly enters the RO membrane. Excessive particles, precipitates, microorganisms, and bacterial viruses that are not treated will block in the RO membrane, and the life of the RO membrane will be shortened, which will also affect the quality of the final water.
4d
Mbombela / Nelspruit
1
R 88.04
SavedSave
that shipping and installation is not included.CHARACTER:
The material meets F.D.A specification and carefully constructs to avoid potential contaminants.CAUTION:
Maximum water temperature 65°CSediment Filters are used to remove physical particles in the water. It can also be used to remove turbidity.All in all our sediment filters come in various µ (Micron) sizes.
Overall the most popular size is 5 microns. So the micron size is the
hole in the pp sediment.Plating solutions / Potable waterTap & D.I. water / CoatingsElectronics / PhotographicsFDA Approved for food contact applicationsMicron Size: 5µm
Features Of A PP Melt-blown Sediment 10 Inc Big Blue Filter
100% polypropylene construction compatible with the broad range of liquidsManufactured FDA-listed materialsLengths up to 40 inches2 to 100-micron retentionHigh flow and long life for low maintenanceVarious designs: plug-in type, with or without a skeletonFixed pore structure eliminates dirt unloadingMultiple O-ring materials/end configurations choices to fit most filter housingsHigher temperature and pressure available with molded center core designBenefits
NOT ONLY FREE OF RESINS BUT ALSO LUBRICANTS, BINDERS & ANTI-STATIC AGENTS
Specifications Of A PP Melt-blown Sediment 10 Inc Big Blue Filter
Filter media: Polypropylene (PP)Inner core: Polypropylene (PP)End caps: Polypropylene (PP)Cage: Polypropylene (PP)Gaskets/O-Rings options: Buna-N, EPDM, Silicone, Viton, TeflonMax. temperature: 176°F (80°C)Recommended differential pressure: 35 psi (2.4 bar)Micron ratings: 5.0µmManufactured with a true graded density, these elements exhibit a high void volume that results in low clean differential pressure losses and excellent dirt holding capacity when compared to similarly rated elements. Each cartridge is complete with integral support for maximum strength. The superior structure remains integral even under severe operating conditions and is less prone to media migration and breakthrough often found on other unsupported spun bonded products.PP Melt-blown Sediment 10 Inc Big Blue Filter Features100% PolypropyleneMaterials meet US FDA Title 21 and USP Class VI requirementsWRAS listed and Reg 31 approved or use in UK potable water supplies.
4d
Mbombela / Nelspruit
1
4d
Other Mpumalanga
1
R 3,545.54
SavedSave
Seakoo centrifugal CPM170 pump 1.1kw – single phaseCentrifugal Pump Motor◆ 2 pole induction motor.
◆ Single phase 220V, 50/60Hz; Three phase 380V, 50/60Hz.
◆ Insulation: Class B/Class F.
◆ Protection:IP44.
◆ With capacitor and thermal overload protector.
Centrifugal Pump Material
Pump body: Cast Iron.Motor support: Aluminum.Impeller: Brass.Motor shaft: Stainless Steel or CS45#.Mechanical seal: Ceramic-Graphite.100% copper winding.Centrifugal Pump Operating Conditions
Suction lift up to 7m.Liquid temperature up to +40℃.Ambient temperature up to +40℃.Max. working pressure: 6 bar.
7h
Mbombela / Nelspruit
5
7d
VERIFIED
1
R 510.46
SavedSave
Please note that shipping and installation is not included.The Cartridge filter housing 4.5” x 10” 1” in / out Clear is ideal
for Whole of house, Pumps, Tanks. Any where a high flow rate is required
eg. house, rural or commercial applications.Larger filters can be used which have a bigger capacity and longer
service life compared to standard size smaller filter housings. A range of filters are available for every situation. Flow rate up to 80Lpm depending on filter used and water pressure & flow. Dimensions are 340mm high without bracket x 185mm wide. Max pressure 620 kpa
Filter Housing : 10″ Big Blue 1 inch ports
Firstly we have a wide range of Filter Cartridges. So please look
below if you can find the filter that you require. In due time do not
hesitate to contact us if you need a filter not on the list.
Important
to realize a Filter Cartridges is a piece of tubular filtration
equipment. That can be used across various industries. For an array of
filtration requirements. A cartridge is encased within a housing or a
casing and used to remove unwanted particles, pollutants, and chemicals
from liquids.
Cartridge
filter housing 4.5” x 10” 1” in / out Clear are perfect for industries
where ultra-pure water filtration is required because of the small
micron size filters that are available.Finally
the pre-sediment filter should be replaced every 3 to 6 months. If your
water filtration system has a sub-micron-post filter, it should be
replaced every 9 to 12 months. If your system has a salt-free water
softener it should be replaced every six years.
7d
Mbombela / Nelspruit
5
13d
Mbombela / Nelspruit
1
R 416.16
SavedSave
Please note that shipping and installation is not included.Bottom Distributor – high flow – bayonet for 30″ tank – 4″ mount
Filter diameter, (inch / mm) 30 ” / 600 mm
Filter mounting hole 4″
Firstly in cleaning systems, Bottom and Top Distributor – high flow –
bayonet for 30″ tank – 4″ mount . The upper ones protect the control
valve from being clogged by particles of a granular load. The lower ones
evenly distribute the flow of water leaving the lifting tube in
different directions. Also collect the already filtered water and send
it back to the lifting tube.
Distributors vary in shape, size, diameter and other characteristics
that are tailored to the specific requirements of the water treatment
system. However, in general, the switch gear is a compact piece made
from durable, impact-resistant plastic. In the walls of the distributor
housing there are threaded bore holes, as well as a hole through which
the device is connected to the water-lifting tube. There are calibrated
slots and connecting threads in the housing or the beams (extending to
all sides of the side plastic tubes).
Dim -L1 – 268
Dim-L2 – 575
Dim-L3 – 165
Tank Diameter -30″
Slots (Area) – 0.2 (=12.96cm2)
Surprisingly the effectiveness of all filter and ion exchange media
is a function of the surface area in contact with the solution to be
treated. All things considered distributors help spread the water
throughout the media for increased contact and the prevention of
channeling. Top and bottom distributors, as well as risers are available
for tanks ranging from 6” to 63” in diameter.
The
bottom distributor basket works great for water softeners, iron
filters, carbon filters, sediment filters, and all other back washing
and up flow tank filter systems. This eliminates the need for gravel
beds in fine mesh resin systems without sacrificing flow.
14d
Mbombela / NelspruitSave this search and get notified
when new items are posted!