Please note that our Terms & Conditions and Privacy Notice are applicable.
Pay & Ship
Buy with confidence. Secure payment options & nationwide delivery. Learn more
Filter & refine
Clear All
Suggested
Results for inverter installers in "inverter installers" in Mpumalanga in Mpumalanga
8
Well experienced semi skilled electrician who is looking for a job with experience in both 3phases and single phase faulty finding inverter installation new installation phase balancing ready to start anytime
14d
1
R 45.08
SavedSave
Please note that shipping and installation is not included.Drain clamp ¼” quick connect Fitting
to suit Reverse Osmosis Water Filter Systems. This includes 50mm Clamp
and quick connect fitting. The revolutionary new “Quick Connect” fitting
is so quick and easy to use. Simply insert tubing firmly into the
fitting and it will lock safely into place.
Our products include residential and commercial reverse osmosis (ro)
systems, whole house water systems, Ultrafiltration systems, shower,
faucet, and counter top filters, filter cartridges and housings, ro
coolers, and kitchen faucets and fittings. Our aim is to make high
quality drinking water accessible for all households. With affordable
pricing, solid quality, Prompt delivery, and top notch customer service,
we hope to assist in bringing you great water for years to come.
Simply insert tubing firmly into the fitting and it will lock safely
into place. The tubing will stay securely in position, and will not be
able to be removed unless the collar of the fitting is depressed, then
it will easily slide out.
Commonly used in conjunction with a Reverse Osmosis Systems when the
home drain line is Drain clamp ¼” quick connect. Great quality and easy
to install.
Installation Instructions
Drill appropriate size hole in sink drain pipe close to the sinkStick included gasket around hole (remove die cut circle from center if neededPosition clamp on pipe and fasten with included screwsPush in tubing and check for leaks
8d
Mbombela / Nelspruit1
R 21.25
SavedSave
Please note that shipping and installation is not included.The Easy Plug straight 1/4 ” thread 1/4″ quick connect fitting for
tubing on the other is a specific type of adapter used in various fluid
systems, particularly for water filtration or pneumatic applications.
These fittings are widely available from various brands, as the “Easy
Plug”.
Size
1/4 in. OD x 1/4 in. NPT
Material
Plastic
Key Features Easy Plug straight 1/4 ” thread 1/4″ quick connect
NO TOOLS REQUIRED: Push-to-connect fittings provide a simple, quick, reliable, and leak-free connection with no tools required. DESIGN: This male
NPT connector is equipped with EPDM O-rings that utilize push-fit
technology to make easy, reliable, and leak-free connections. DURABLE: This male coupler is made with durable white polypropylene that can protect against chemicals.MATERIAL:
The specific “Easy Plug” product is made with durable white
polypropylene with EPDM O-rings. Which can offer protection against
chemicals. INSTALLATION:
The push-to-connect design simplifies installation and removal of
tubing; simply push the tube into the fitting until it clicks or reaches
the insertion mark for a secure seal.
8d
Mbombela / Nelspruit1
R 23.50
SavedSave
Please note that shipping and installation is not included.The 1/4″ x 1/4″ elbow quick connect is a push-to-connect fitting that
provides a reliable, leak-free connection for various applications,
including potable water systems and air lines. It is widely available
online from specialty plumbing and water filtration suppliers.
1/4″ x 1/4″ elbow quick connect specifications
This fittings features John Guest’s push-fit technology, allowing for
quick, tool-free installation and disconnection. It is manufactured
from durable, corrosion-resistant plastic and meets high quality
standards.
Material: Acetalcopolymer (typically gray) with a
food-grade nitrile O-ring, or white polypropylene with EPDM O-rings for
pure water applications.Connections: Available in various imperial and
metric sizes, connecting two equal-sized OD (Outside Diameter) tubes
with a swivel NPTF (National Pipe Taper Fuel) or BSPT (British Standard
Pipe Taper) male thread on the run.Working Pressure and Temperature:Maximum 150 PSI at 70°F (21°C).Maximum 60 PSI at 140°F (60°C).Suitable for air/pneumatic systems up to 10 bar (approx. 145 psi).Applications: Suitable for potable liquids, foodstuff, inert gases, air, and vacuum applications.Certifications: Made with lead-free, FDA-approved materials and meets NSF/ANSI Standards 14, 51, and 61 for use with drinking water.
8d
Mbombela / Nelspruit12
R 2,200,000
SavedSave
*MULTI-INCOME SMALLHOLDING FOR SALE – FARM, RENT, INVEST, LIVE – PROSPERITY AH, DELMAS, MPUMALANGA*Price: *R2,200,000 (Negotiable)*This exceptional *1.8-hectare* smallholding in Prosperity AH, Delmas presents a rare opportunity to acquire a *well-developed, income-generating lifestyle property. Offering multiple dwellings, established agricultural infrastructure, strong water security, and 3-phase power* , this property is ideally suited for *investors, extended families, small-scale farming, or mixed-use living.*________________________________________*1. MAIN HOUSE*• *3 Bedrooms, all fitted with built-in cupboards*• *2 Bathrooms*• Main bedroom with *en-suite bathroom* (shower, basin & toilet)• Second bedroom with *study area*• Spacious *open-plan living areas*• *Large kitchen* with built-in cupboards• Lounge• Enclosed veranda• Entertainment area• Each house fitted with *its own geyser*• Additional *wood-fire heating system* (Donkey Boiler)________________________________________*2. SECOND FLAT (ATTACHED TO MAIN HOUSE)**Ideal for extended family living or rental income* , this flat consists of:• Open-plan kitchen and lounge• 3 Bedrooms• 1 Bathroom (shower, toilet and basin)• 1 Laundry________________________________________*3. SEPARATE FLAT (INCOME-GENERATING UNIT)*A *fully self-contained unit offering excellent rental* or staff accommodation potential:• 1 Bedroom• 1 Bathroom (shower, toilet and basin)• Open-plan kitchen and lounge• Carport for *2 vehicles*________________________________________*4. INVESTMENT & INCOME POTENTIAL**This property offers multiple established and future income streams, including:*• Rental income from two separate flats• Small-scale poultry farming (± 4,000 chicken capacity)• Pig farming (± 400 adult pigs)• Potential agri-business, boarding, or mixed-use development• Space to further expand or add rental units (subject to approvals)________________________________________*5. OUTBUILDINGS & STORAGE*• *4* Garages• *Tool shed* – 36 sqm• *3 Storage units:* - 1 × 36 sqm store - 2 × 12 sqm stores• *6m × 6m Wendy house* (employee accommodation)• *3* Main gates• Fully *fenced & secure* property________________________________________*6. AGRICULTURAL & LIFESTYLE FEATURES*• Chicken coop *(± 4,000 chicken capacity)*• Pigsty *(± 400 adult pigs)*• Stable• Bird cage• Fish pond• Small splash pool________________________________________*7. WATER, POWER & UTILITIES*• Main borehole *± 270m* deep• Pump level at *± 210m*• Pump delivering *± 2,000 litres per hour*• *3 JoJo* tanks: - *1* × 5,000L - *2* × 2,500L• *3-phase* electricity• *Prepaid* electricity meter• *Solar* lighting installed on the property________________________________________*8. CONSTRUCTION & RENOVATION DISCLOSURE*Structure 2 on the main property is currently *under construction* . The main building construction has been *completed* , with only minor finishing work outstanding to finalize the project. The property is being *sold as is* .
1d
Delmas1
R 15,903.35
SavedSave
Please note that shipping and installation is not included.Pedrollo DG PED5-Automatic pressurisation system with inverter. Which
integrates a built-in high efficiency self-priming pump, a accumulator
tank, pressure and flow rate sensors and a non-return valve.DG PED is a compact autonomous quiet and high
performance pumping system. The sophisticated electronically controlled
inverter, at the heart of the system, in an intuitive way:
maintains the pressure of the installation constant by regulating
the velocity of the pump in accordance with the water required;controls the hydraulic and electric operating parameters and protects the pump from abnormalities;can be equipped with an expansion card that makes it possible to work in parallel with other DG PED in the pumping groups and to manage input and output signalsit adapts to every type of pressurisation system, including existing onesit limits the starting and operating currents in order to provide a greater saving of energy.
Features:
Liquid type: Clean Water
Uses: domestic, civil
Applications: water supply systems, pressure systems
Typology: electric pumps with variable speed control
Family: self-priming
Performance Range of Pedrollo DG PED5-Automatic pressurisation system with inverter:
Flow rate up to 120.00 l/min (7.2 m³/h) Head up to 55.00 m
23d
Mbombela / Nelspruit1
R 17,363.16
SavedSave
Please note that shipping and installation is not included.Vontron sea water reverse osmosis membrane SW22-8040 description
SW Series is always used for sea water desalination. It can improve
permeate flow by optimizing membrane element structure. This product has
the features of high rejection rate, stable performance, low operating
cost and small equipment investment. It should be used to obtain
qualified drinking water from sea water.
Application
Seawater desalination.Water reuse and near-zero discharge, for example: chemical industry, iron and steel industry, electric power industry, etc.Concentration of high-concentration materials, for example:pharmaceuticals materials, food and beverage materials, etc.
Model
Stable Rejection Rate(%)
Permeate Flow GPD(m3/d)
Active Membrane Area ft2(m2)
Feed Spacer Thickness mil
SW22-8040
99,9
6000(22,7)
400(37,2)
28
Operating Conditions and Limits
Maximum operating pressure psi(MPa)
1200 (8,28)
Maximum feedwater temperature ℃
45
Maximum inlet flow rate m3/h
17
Maximum concentration of free chlorine mg/L
0,1
Maximum pressure drop per element psi(MPa)
15 (0,1)
Allowed pH range for feedwater in operation
2-11
Allowed pH range for chemical cleaning
1-23
Maximum feedwater flow SDI15
5
5d
Mbombela / Nelspruit1
R 2,975.62
SavedSave
Please note that shipping and installation is not included.
Technical Specification of Water Dispenser Hot & Cold BY533:
Model No.
BY533
Type
top loading
Function
Hot & Cold
Voltage
220-240V
Heating Power
420W
Heating capacity
4.5L/Hour
Hot tank capability
0.8L
Cooling power
85W
Cooling capacity
1.8L/Hour
Cold tank capability
2.7L
Compressor
Qiangjiang compressor
aluminum
hot/cold tank Material
SS304 stainless steel
Cooling gas
R134
Cabinet or Fridge
Cabinet
Product Dimension
27x29x85.8cm
Carton Dimension
30x32x88cm
Loading quantity
308/812PCS 20GP/40HQ
The Water Dispenser
Hot & Cold BY533 facilitates easily supply of drinking water. It is
very useful equipment and can supply cold, moderate and hot water. Hot
and cold water dispensers connect to a water supply and are designed to
provide convenient access to hot or cold water, depending on the
preference.
These
machines are equipped with both a heating element that warms the water
to the desired temperature and a refrigeration system that cools it as
needed. Water
dispenser facilitates easily supply of drinking water. It is very
useful equipment and can supply cold, moderate and hot water. Water
dispensers play a vital role in workplaces, restaurants, hospitals and
public places for storing clean drinking water.
Insert the bottle vertically on the seat and press the water faucets until the water flows out of the red hot water faucet.Insert the power plug into
the wall socket and turn the electric switches ON to start the
appliance. DO NOT MOVE BOTH SWITCHES AT THE TIME. Cooling and heating
indicator lights should light up. The appliance is designed to provide
hot or cold water whenever needed. It will automatically turn on and off
when the water reaches the desired temperature.
12d
Mbombela / Nelspruit1
Contact f/price
SavedSave
Please note that shipping and installation is not included.DAB jet self-priming composite pump 1kW – single phase Technical Data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 1kW – single phase :
Pump body in technocpolymer and motor support in die cast aluminium.Impeller, diffuser, venturi tube and sand guard in technopolymerStainless steel wear ring.Carbon/ceramic mechanical seal.
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations.Suitable for small farms and gardening, small scale industrial services and where self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated thermo-amperometric protection and
permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41)
15d
Mbombela / Nelspruit1
R 4,456
SavedSave
Please note that shipping and installation is not included.DAB jet self-priming composite pump 0.44kW – single phase Technical Data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 0.44kW – single phase:
Pump body in technocpolymer and motor support in die cast aluminium.Impeller, diffuser, venturi tube and sand guard in technopolymerStainless steel wear ring.Carbon/ceramic mechanical seal.
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations. Suitable for
small farms and gardening, small scale industrial services and where
self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated thermo-amperometric protection and
permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41)
15d
Mbombela / Nelspruit1
R 5,089
SavedSave
Please note that shipping and installation is not included.DAB jet self-priming composite pump 0.75kW – single phase Technical Data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 0.75kW – single phase:
Pump body in technocpolymer and motor support in die cast aluminium.Impeller, diffuser, venturi tube and sand guard in technopolymerStainless steel wear ring.Carbon/ceramic mechanical seal.
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations. Suitable for
small farms and gardening, small scale industrial services and where
self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated thermo-amperometric protection and
permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41)
15d
Mbombela / Nelspruit1
R 3,524
SavedSave
Please note that shipping and installation is not included.Technical data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallized and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 0,6kW– single phase:
Pump body in techno polymer and motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical seal.
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations. Suitable for
small farms and gardening, small scale industrial services and where
self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated therno ampero metric protection
and permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41)
15d
Mbombela / Nelspruit1
R 5,984
SavedSave
Please note that shipping and installation is not included.DAB Esytwin mini is used to be able to mount 2 Qty Esybox’s side by
side. For systems where either a larger flow or a where stand-by pump is
required.
The suction and discharge 1″ ¼ NPT connection can be made at either
side of the dock or on the same side to make piping up the dock as easy
as possible.
BENEFITS:
INCREASING CAPACITYINCREASING THE RELIABILITYWIRELESS COMMUNICATION
The ESYBOX’s can comunicate with each other without a cable. By means
of wireless Communications of up to 4 ESYBOX’s that can talk to each
other to allow for easy set-up and duty rotation. thanks to the DAB
Esytwin mini
The whole pump is mounted in a sound-proof closed ABS housing.Thanks to the inverter and synchronous motor
esybox. There will be a huge energy saving with no pressure surges and
less stress on pipes & fittings.
More About Esybox Mini!
Firstly it has a different appearance than any other booster set and
is small and completely integrated. Once you install and use it, you
realize that the real difference is in the comfort and performance.All things considered Esybox Mini 3 uses the most advanced DAB
technologies to create constant pressure according to the system demands
and thus an optimization of energy consumption.
20d
Mbombela / Nelspruit1
R 3,128
SavedSave
Please note that shipping and installation is not included.DAB jet self-priming composite pump 0.75kW – single phase Technical Data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 0.75kW – single phase:
Pump body in technocpolymer and motor support in die cast aluminium.Impeller, diffuser, venturi tube and sand guard in technopolymerStainless steel wear ring.Carbon/ceramic mechanical seal.Inlet: 1″Outlet: 1″
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations. Suitable for
small farms and gardening, small scale industrial services and where
self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated thermo-amperometric protection and
permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41)
15d
Mbombela / Nelspruit1
R 6,254
SavedSave
Please note that shipping and installation is not included.DAB jet self-priming composite pump 1kW – three phase Technical Data:
Operating range: from 0.6 to 5.4 m3/h with head up to 54 meters.Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallized and chemically neutral.Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41).Maximum ambient temperature: +40°CMaximum operating pressure: 6 bar (600 kPa)Maximum suction depth: 8 meters.Installation: fixed in a horizontal position.Special executions on request: alternative voltages and/or frequencies.Motor protection rating: IP 44Terminal block protection rating: IP 55Insulation class: FStandard input voltage: single phase 220/240 V
Constructional features of the DAB jet self-priming composite pump 1kW – three phase :
Pump body in technocpolymer and motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in technopolymerStainless steel wear ring.Carbon/ceramic mechanical seal.
Applications:
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.Suitable for pumping water with low levels of sandy impurities.Especially used in domestic water supply installations.Suitable for small farms and gardening, small scale industrial services and where self priming is necessary.
Constructional features of the motor:Finally the asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee
low noise and long life. Incorporated thermo-amperometric protection and
permanently inserted capacitor in the single phase version. It is
recommended to use overload protection for three phase motor protection,
in compliance with current legislation. Manufactured pursuant to CEI
2-3 and CEI 61-69 (EN 60335-2-41).
15d
Mbombela / Nelspruit1
R 6,583
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 1kW – three phase
with excellent suction capacity even in the presence of air bubbles.
Suitable for pumping water with low levels of sandy impurities.
Especially used in domestic water supply installations.
Suitable for small farms and gardening, small scale industrial
services and where self priming is necessary. Complete of ejector and
diffuser for high priming capability. Suitable for sucking from well up
to 9 meter, provided in 3 different material pump body: cast-iron,
stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 1kW – three phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical seal
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
15d
Mbombela / Nelspruit1
R 6,081
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 0.75kW – three phase
with excellent suction capacity even in the presence of air bubbles.
Important to realize it is suitable for pumping water with low levels of
sandy impurities. Especially used in domestic water supply
installations.
Afterwards it is suitable for small farms and gardening, small scale
industrial services and where self priming is necessary. For the purpose
of complete of ejector and diffuser for high priming capability.
Suitable for sucking from well up to 9 meter, provided in 3 different
material pump body: cast-iron, stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 0.75kW – three phase:
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical sealInlet: 1″Outlet: 1″
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
15d
Mbombela / Nelspruit1
R 12,787
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 2.2kW – single phase
with excellent suction capacity even in the presence of air bubbles.
Important to realize it is suitable for pumping water with low levels of
sandy impurities. Especially used in domestic water supply
installations.
Afterwards it is suitable for small farms and gardening, small scale
industrial services and where self priming is necessary. For the purpose
of complete of ejector and diffuser for high priming capability.
Suitable for sucking from well up to 9 meter, provided in 3 different
material pump body: cast-iron, stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 2.2kW – single phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical sealInlet: 1″Outlet: 1″
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
15d
Mbombela / Nelspruit1
R 13,900
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 1.8kW – single phase
with excellent suction capacity even in the presence of air bubbles.
Important to realize it is suitable for pumping water with low levels of
sandy impurities. Especially used in domestic water supply
installations.
After wards it is suitable for small farms and gardening, small scale
industrial services and where self priming is necessary. For the purpose
of complete of ejector and diffuser for high priming capability.
Suitable for sucking from well up to 9 meter, provided in 3 different
material pump body: cast-iron, stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 1.8kW – single phase :
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical sealInlet: 1″Outlet: 1″
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
15d
Mbombela / Nelspruit1
R 4,691
SavedSave
Please note that shipping and installation is not included.Firstly the DAB jet self-priming cast iron pump 0.44kW – single phase
with excellent suction capacity even in the presence of air bubbles.
Suitable for pumping water with low levels of sandy impurities.
Especially used in domestic water supply installations.
Suitable for small farms and gardening, small scale industrial
services and where self priming is necessary. Complete of ejector and
diffuser for high priming capability. Suitable for sucking from well up
to 9 meter, provided in 3 different material pump body: cast-iron,
stainless steel and techno polymer.
Constructional features of the DAB jet self-priming cast iron pump 0.44kW – single phase:
Cast-iron 200 UNI ISO 185Motor support in die cast aluminum.Impeller, diffuser, venturi tube and sand guard in techno polymerStainless steel wear ring.Carbon/ceramic mechanical seal
Constructional features of the motor:
Asynchronous type, closed, with external air cooling.Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.Incorporated thermo amperometric protection and permanently inserted capacitor in the single phase version.It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
Operating range:
From 0.4 to 10.5 m3/h with head up to 62 meters.
Liquid temperature range:
For domestic use: from 0°C to +35°C (EN 60335-2-41)
For other use: from 0°C to +40°C
Self-priming: Up to 9 meter.
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Max liquid temperature: 40°C.
Standard input voltage: Single phase 220/240 VThree phase 230/400 V
15d
Mbombela / NelspruitSave this search and get notified
when new items are posted!
